What is the last date to bid for this tender?

Bids must be submitted on the Odisha eProcurement portal (tendersodisha.gov.in) by 30 Oct 2026, 05:00 PM. Bids are scheduled to open on 31 Oct 2026, 11:00 AM.

What is the estimated value of this tender?

The estimated tender value is ₹4.68 Cr (₹4,67,65,798).

How much EMD is required?

The EMD (bid security) is ₹4.68 L (₹4,67,660). The portal lists EMD exemption as available for eligible bidders — check the DTCN for who qualifies.

Who can bid for this tender?

The DTCN states: Contractors must be registered with the Government of Odisha or of equivalent class of other State Government/Railways/CPWD/MES; Joint Ventures are allowed for works valued exceeding Rs 10.00 crore, with a maximum of three constituents.

What work experience is required?

As extracted from the DTCN: For works valued more than Rs 5.00 crores, bidders must have executed similar nature of work worth 75% of the estimated cost in any three financial years of the last preceding five years (2021-22 to 2025-26).

What is the completion period?

The period of work is 365 days, and bids must remain valid for 90 days.

Which department issued this tender?

This tender was issued by CE RW I, RWCIRCLE-SAMBALPUR; the tender inviting authority is the Circle Officer.

What documents are required to submit a bid?

The DTCN lists 20 documents, including Cost of tender paper (online payment confirmation), EMD (online payment confirmation), Valid Registration Certificate, GSTIN, PAN Card, No Relationship Certificate (Schedule-A), and 14 more.

RoadClosed

Construction of H.L. Bridge over Local Nallah at 1.700Km on Naghapali to Larambha _GP_ road

Bargarh CE RW IRWCIRCLE-SAMBALPUR

Tender ID 2026_CERWI_143840_1Ref ONLINE-RWCSBP-26/2026-27

Estimated value: ₹4.68 Cr
EMD: ₹4.68 L; Exemption available
Tender fee: ₹10.0K
Work period: 365 days

Bid submission

Closed

Closed on 30 Oct 2026, 05:00 PM

Bid submission for this tender has closed. Browse closed tenders in the archive →

About this tender

CE RW I has invited bids for “Construction of H.L. Bridge over Local Nallah at 1.700Km on Naghapali to Larambha _GP_ road” in Bargarh district, Odisha. The estimated tender value is ₹4.68 crore and the completion period is 365 days. Bids must be submitted by 30 Oct 2026, 05:00 PM.

Bid readiness

Based on the tender, not your profile

Not available: Bid submission has closed
Done: BOQ available · 39 items
Done: DTCN analysed · 49 requirements extracted
Done: 20 required documents identified
Needs review: Experience requirement needs review
Needs review: Financial requirements need review

Review requirements

Important dates

All times IST, as published on the portal

Published16 Oct 2026, 02:00 PM
Document downloadUntil 30 Oct 2026
Submission deadline30 Oct 2026, 05:00 PM
Bid opening31 Oct 2026, 11:00 AM

Tender intelligence

Eligibility & bid requirements

DTCN analysed49 requirements extracted20 documents identifiedExtracted from the official tender document

This tender from the Chief Construction Engineer, Rural Works Circle, Sambalpur, Odisha, invites percentage rate bids for various bridge construction works across Sambalpur and Baragada districts. The projects range in estimated cost from approximately 2.62 Crores to 6.87 Crores INR, excluding GST. Contractors registered with the Government of Odisha or equivalent class from other State Governments/Railways/CPWD/MES, including Joint Ventures with bridge construction experience, are eligible to bid. A key requirement is the online submission of bids with a Digital Signature Certificate and a non-refundable tender paper cost of Rs. 10,000.

Eligibility

8 items

Contractors must be registered with the Government of Odisha or of equivalent class of other State Government/Railways/CPWD/MES.
Joint Ventures are allowed for works valued exceeding Rs 10.00 crore, with a maximum of three constituents.
The lead partner in a Joint Venture must be a registered Contractor of appropriate class of the State.

Show 5 more

Contractors must not have abandoned any work of similar nature or had their contract rescinded in the last five years.
Contractors must have a valid Registration Certificate of the required class as mentioned in the annexure.
Contractors must have an up-to-date GSTIN Certificate and possess a PAN Card.
For works valued up to Rs. 5.00 crores, bidders only need to meet clauses 14(a), (b), (c), (d), and 14(h).
SC and ST Category Contractors with 'B' Class registration or below are eligible for a 10% price preference.

Source: Original DTCNView source document

Experience

1 item

For works valued more than Rs 5.00 crores, bidders must have executed similar nature of work worth 75% of the estimated cost in any three financial years of the last preceding five years (2021-22 to 2025-26).

Source: Original DTCNView source document

Financial

9 items

The total financial turnover in civil engineering works must not be less than the amount put to tender during any three financial years of the last preceding five financial years (2021-22 to 2025-26).
The available bid capacity at the expected time of bidding must be more than the total estimated cost of the works.
EMD is required at 1% of the estimated cost, to be submitted online.

Show 6 more

If a bidder withdraws or modifies their bid before the acceptance period, the EMD shall be forfeited.
Additional Performance Security (APS) is required if the bid price is below the estimated cost, ranging from 0.1% to 1% plus 0.2% for every percentage below 20%.
APS must be deposited within seven days of the Letter of Acceptance (LOA) in the form of a Term Deposit Receipt or Bank Guarantee.
Failure to deposit APS will result in bid cancellation, debarment for 180 days, and blacklisting proceedings.
The security deposit will be refunded after two years of completion of the work and payment of the final bill, and will not carry any interest.
Failure to enter into the required agreement and make the security deposit will entail debarment from tendering for 180 days.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

17 items

Bidders must possess compatible Digital Signature Certificates (DSC) of required Class (Class II or Class III).
Bidders must have in possession (owned or hired/leased) specific machineries required for the execution of the work as per relevant clauses of specification of Road and Bridge work of MoSRT&H (5th Revision).
For Open foundation bridges, required machinery includes 1 Hydraulic Excavator, 1 Vibratory Roller/Soil Compactor (8-10 ton), 1 Self-loading Concrete Mixer with batch mix arrangement, and 1 Generator – 33 KVA.

Show 14 more

For Well foundation bridges, required machinery includes 1 Hydraulic Excavator, 1 Vibratory Roller/Soil Compactor (8-10 ton), 1 Self-loading Concrete Mixer with batch mix arrangement, 1 Crawler Crane, and 1 Generator – 33 KVA.
For Pile foundation bridges, required machinery includes 1 Hydraulic Excavator, 1 Vibratory Roller/Soil Compactor (8-10 ton), 1 Self-loading Concrete Mixer with batch mix arrangement, 1 Piling Rig with Bentonite Pump, and 1 Generator – 33 KVA.
Proof of ownership for machinery must be furnished via invoices, sale deeds, or valid lease agreements with lessor ownership documents.
Lease/hire agreements for equipment must be on a long-term basis for a minimum period equal to the intended completion period plus 90 days from the last date of bid receipt.
Super Class contractors shall employ two Graduate Engineers and two Diploma Holders from Odisha.
Special Class contractors shall employ one Graduate Engineer and two Diploma Holders from Odisha.
'A' Class contractors shall employ one Graduate Engineer or two Diploma Holders from Odisha.
All reinforced cement concrete work must conform to IRC Code and Bridge Code section I, II, III, IV and VII & latest design criteria for prestressed concrete bridges specifically for road and bridges issued by MoSRT&H, Govt. of India.
Steel shuttering & centring, lined with suitable sheeting and made leak proof and water tight, shall be used.
Concrete should be machine mixed unless otherwise ordered.
Cement shall be used by bags, with one bag weighing 50 Kg.
The contractor must arrange approved quality and specification materials like Steel, Cement, paint, and bitumen at their own cost.
Concrete test specimens (150mm × 150mm × 150mm) for each structural member must be taken and tested in Departmental Quality Control and Research Laboratory of Cuttack or Bhubaneswar.
The maximum permissible tilt in well sinking is 1:80 and shift is 150mm to the normal direction.

Source: Original DTCNView source document

Contract conditions

14 items

The bid should be submitted online via www.tendersorissa.gov.in.
The bid for the work shall remain open for acceptance for a period of ninety days from the last date of receipt of bids.
The amount put to bid is exclusive of GST; GST shall be paid over the work bill amount at the time of payment of each bill.

Show 11 more

Bids are to be submitted in two covers: Cover-I for technical documents and Cover-II for the price bid.
The lowest preferred bidder must produce original documents for verification within five days of price bid opening.
Failure to produce original documents will result in debarment for 3 years and blacklisting.
If the L1 bidder fails to execute the agreement, they will be debarred for three years and blacklisted; the L2 bidder may be considered if they negotiate to the L1 rate.
The minimum period of blocking of Portal Registration for violations shall be no less than 180 days.
The completion period for works is as mentioned in the annexure (e.g., 12 or 15 calendar months).
The quantity mentioned can be increased or reduced by up to 10% for individual items, subject to a maximum of 5% over the estimated cost.
Liquidated damages will be imposed if the agency fails to achieve the milestones in the work programme.
The contractor is liable to fully indemnify the department for payment of compensation under the Workman Compensation Act.
The contractor must abide by the fair wages clause and shall not employ child labour.
No claim will be entertained for extra items or quantities unless a written order is obtained from the Engineer-in-charge and the rate is settled beforehand.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Bill of quantities

39 priced items · ₹4.68 Cr (₹4,67,65,798)

Download BOQ file

Major components

Share of BOQ amount, grouped by item description

Concrete & RCC37%₹1.75 Cr
Reinforcement steel29%₹1.35 Cr
Earthwork & excavation12%₹56.10 L
Road & bituminous work11%₹52.78 L
Doors, windows & steelwork6%₹30.24 L
Flooring & tiling3%₹12.72 L

Largest items

By amount

Providing ,Cutting, Bending, Binding, Straightening Placing in position of HYSD bars of grade Fe 500 D confir…Item 15 · 1,394.7 qtl₹1.27 Cr
Providing RCC of grade M-30 in the following structures as per approved drawing and technical specifications…Item 7 · 430.99 cum₹39.72 L
Providing RCC of grade M-30 in the following structures as per approved drawing and technical specifications…Item 6 · 393.88 cum₹35.42 L
Providing and laying Plain cement concrete of grade M-15 in foundation , substructure of bridge works, drain…Item 5 · 525.57 cum₹30.69 L
Providin, laying, spreading compacting graded stone aggregate to Wet Mix Macadam specification including pre…Item 32 · 1,195.88 cum₹30.24 L

Tender details

Tender reference: ONLINE-RWCSBP-26/2026-27
Tender ID: 2026_CERWI_143840_1
District: Bargarh
Location: Bargarh
Tender type: Open Tender
Tender category: Works
Period of work: 365 days

Show all 9 fields

Product category: Civil Works - Bridges
Pincode: 768028

Authority

State
Government of Odisha
Department
CE RW I
Organisation
RWCIRCLE-SAMBALPUR
Inviting authority
Circle Officer

All CE RW I tenders in Bargarh →

Costs

Estimated value: ₹4,67,65,798; ₹4.68 crore
EMD / bid security: ₹4,67,660; Exemption available for eligible bidders
Tender fee: ₹10,000; Cost of bid document

Bid validity: 90 days

Security & deductions from the DTCN (7)

EMD is required at 1% of the estimated cost, to be submitted online.
If a bidder withdraws or modifies their bid before the acceptance period, the EMD shall be forfeited.
Additional Performance Security (APS) is required if the bid price is below the estimated cost, ranging from 0.1% to 1% plus 0.2% for every percentage below 20%.
APS must be deposited within seven days of the Letter of Acceptance (LOA) in the form of a Term Deposit Receipt or Bank Guarantee.
Failure to deposit APS will result in bid cancellation, debarment for 180 days, and blacklisting proceedings.
The security deposit will be refunded after two years of completion of the work and payment of the final bill, and will not carry any interest.
Failure to enter into the required agreement and make the security deposit will entail debarment from tendering for 180 days.

Source: Original DTCN

Frequently asked questions

Eligibility & bid requirements

DTCN analysed49 requirements extracted20 documents identifiedExtracted from the official tender document

Eligibility

8 items

Contractors must be registered with the Government of Odisha or of equivalent class of other State Government/Railways/CPWD/MES.
Joint Ventures are allowed for works valued exceeding Rs 10.00 crore, with a maximum of three constituents.
The lead partner in a Joint Venture must be a registered Contractor of appropriate class of the State.

Show 5 more

Contractors must not have abandoned any work of similar nature or had their contract rescinded in the last five years.
Contractors must have a valid Registration Certificate of the required class as mentioned in the annexure.
Contractors must have an up-to-date GSTIN Certificate and possess a PAN Card.
For works valued up to Rs. 5.00 crores, bidders only need to meet clauses 14(a), (b), (c), (d), and 14(h).
SC and ST Category Contractors with 'B' Class registration or below are eligible for a 10% price preference.

Source: Original DTCNView source document

Experience

1 item

For works valued more than Rs 5.00 crores, bidders must have executed similar nature of work worth 75% of the estimated cost in any three financial years of the last preceding five years (2021-22 to 2025-26).

Source: Original DTCNView source document

Financial

9 items

The total financial turnover in civil engineering works must not be less than the amount put to tender during any three financial years of the last preceding five financial years (2021-22 to 2025-26).
The available bid capacity at the expected time of bidding must be more than the total estimated cost of the works.
EMD is required at 1% of the estimated cost, to be submitted online.

Show 6 more

If a bidder withdraws or modifies their bid before the acceptance period, the EMD shall be forfeited.
Additional Performance Security (APS) is required if the bid price is below the estimated cost, ranging from 0.1% to 1% plus 0.2% for every percentage below 20%.
APS must be deposited within seven days of the Letter of Acceptance (LOA) in the form of a Term Deposit Receipt or Bank Guarantee.
Failure to deposit APS will result in bid cancellation, debarment for 180 days, and blacklisting proceedings.
The security deposit will be refunded after two years of completion of the work and payment of the final bill, and will not carry any interest.
Failure to enter into the required agreement and make the security deposit will entail debarment from tendering for 180 days.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

17 items

Bidders must possess compatible Digital Signature Certificates (DSC) of required Class (Class II or Class III).
Bidders must have in possession (owned or hired/leased) specific machineries required for the execution of the work as per relevant clauses of specification of Road and Bridge work of MoSRT&H (5th Revision).
For Open foundation bridges, required machinery includes 1 Hydraulic Excavator, 1 Vibratory Roller/Soil Compactor (8-10 ton), 1 Self-loading Concrete Mixer with batch mix arrangement, and 1 Generator – 33 KVA.

Show 14 more

For Well foundation bridges, required machinery includes 1 Hydraulic Excavator, 1 Vibratory Roller/Soil Compactor (8-10 ton), 1 Self-loading Concrete Mixer with batch mix arrangement, 1 Crawler Crane, and 1 Generator – 33 KVA.
For Pile foundation bridges, required machinery includes 1 Hydraulic Excavator, 1 Vibratory Roller/Soil Compactor (8-10 ton), 1 Self-loading Concrete Mixer with batch mix arrangement, 1 Piling Rig with Bentonite Pump, and 1 Generator – 33 KVA.
Proof of ownership for machinery must be furnished via invoices, sale deeds, or valid lease agreements with lessor ownership documents.
Lease/hire agreements for equipment must be on a long-term basis for a minimum period equal to the intended completion period plus 90 days from the last date of bid receipt.
Super Class contractors shall employ two Graduate Engineers and two Diploma Holders from Odisha.
Special Class contractors shall employ one Graduate Engineer and two Diploma Holders from Odisha.
'A' Class contractors shall employ one Graduate Engineer or two Diploma Holders from Odisha.
All reinforced cement concrete work must conform to IRC Code and Bridge Code section I, II, III, IV and VII & latest design criteria for prestressed concrete bridges specifically for road and bridges issued by MoSRT&H, Govt. of India.
Steel shuttering & centring, lined with suitable sheeting and made leak proof and water tight, shall be used.
Concrete should be machine mixed unless otherwise ordered.
Cement shall be used by bags, with one bag weighing 50 Kg.
The contractor must arrange approved quality and specification materials like Steel, Cement, paint, and bitumen at their own cost.
Concrete test specimens (150mm × 150mm × 150mm) for each structural member must be taken and tested in Departmental Quality Control and Research Laboratory of Cuttack or Bhubaneswar.
The maximum permissible tilt in well sinking is 1:80 and shift is 150mm to the normal direction.

Source: Original DTCNView source document

Contract conditions

14 items

The bid should be submitted online via www.tendersorissa.gov.in.
The bid for the work shall remain open for acceptance for a period of ninety days from the last date of receipt of bids.
The amount put to bid is exclusive of GST; GST shall be paid over the work bill amount at the time of payment of each bill.

Show 11 more

Bids are to be submitted in two covers: Cover-I for technical documents and Cover-II for the price bid.
The lowest preferred bidder must produce original documents for verification within five days of price bid opening.
Failure to produce original documents will result in debarment for 3 years and blacklisting.
If the L1 bidder fails to execute the agreement, they will be debarred for three years and blacklisted; the L2 bidder may be considered if they negotiate to the L1 rate.
The minimum period of blocking of Portal Registration for violations shall be no less than 180 days.
The completion period for works is as mentioned in the annexure (e.g., 12 or 15 calendar months).
The quantity mentioned can be increased or reduced by up to 10% for individual items, subject to a maximum of 5% over the estimated cost.
Liquidated damages will be imposed if the agency fails to achieve the milestones in the work programme.
The contractor is liable to fully indemnify the department for payment of compensation under the Workman Compensation Act.
The contractor must abide by the fair wages clause and shall not employ child labour.
No claim will be entertained for extra items or quantities unless a written order is obtained from the Engineer-in-charge and the rate is settled beforehand.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Costs

Estimated value

₹4,67,65,798

₹4.68 crore

EMD / bid security

₹4,67,660

Exemption available for eligible bidders

Tender fee

₹10,000

Cost of bid document

Bid validity: 90 days

Security & deductions from the DTCN (7)

EMD is required at 1% of the estimated cost, to be submitted online.
If a bidder withdraws or modifies their bid before the acceptance period, the EMD shall be forfeited.
Additional Performance Security (APS) is required if the bid price is below the estimated cost, ranging from 0.1% to 1% plus 0.2% for every percentage below 20%.
APS must be deposited within seven days of the Letter of Acceptance (LOA) in the form of a Term Deposit Receipt or Bank Guarantee.
Failure to deposit APS will result in bid cancellation, debarment for 180 days, and blacklisting proceedings.
The security deposit will be refunded after two years of completion of the work and payment of the final bill, and will not carry any interest.
Failure to enter into the required agreement and make the security deposit will entail debarment from tendering for 180 days.

Source: Original DTCN

Frequently asked questions

Construction of H.L. Bridge over Local Nallah at 1.700Km on Naghapali to Larambha _GP_ road

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

Construction of H.L. Bridge over Local Nallah at 1.700Km on Naghapali to Larambha _GP_ road

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more