What is the last date to bid for this tender?

Bids must be submitted on the Odisha eProcurement portal (tendersodisha.gov.in) by 30 Oct 2026, 05:00 PM. Bids are scheduled to open on 31 Oct 2026, 11:00 AM.

What is the estimated value of this tender?

The estimated tender value is ₹3.91 Cr (₹3,91,28,096).

How much EMD is required?

The EMD (bid security) is ₹3.91 L (₹3,91,281). The portal lists EMD exemption as available for eligible bidders — check the DTCN for who qualifies.

Who can bid for this tender?

The DTCN states: Contractors must be registered with the Government of Odisha or of equivalent class from other State Government/Railways/CPWD/MES; Joint Ventures are allowed for works exceeding Rs 10.00 crore, with a maximum of three constituents, and the lead partner must be a registered Contractor of appropriate class of the State.

What work experience is required?

As extracted from the DTCN: For works valued more than Rs 5.00 crores, bidders must have executed similar nature of work worth 75% of the estimated cost in any three financial years of the last five preceding years (2021-22 to 2025-26).

What is the completion period?

The period of work is 365 days, and bids must remain valid for 90 days.

Which department issued this tender?

This tender was issued by CE RW I, RWCIRCLE-SAMBALPUR; the tender inviting authority is the Circle Officer.

What documents are required to submit a bid?

The DTCN lists 13 documents, including GSTIN, PAN Card, Valid Registration Certificate, Affidavit (regarding no abandonment/rescission of work in last 5 years), No Relationship Certificate (Schedule-A), Undertaking for obtaining Labour Licence/EPF, and 7 more.

RoadClosed

Construction of H.L. Bridge over Gendajore Nallah on Jarabaga Bhatipada to Bichhukhalia Nuadihi Road

Kuchinda, Bargarh CE RW IRWCIRCLE-SAMBALPUR

Tender ID 2026_CERWI_143742_1Ref Bridge Tender Online RWCSBP-26/2026-27

Estimated value: ₹3.91 Cr
EMD: ₹3.91 L; Exemption available
Tender fee: ₹10.0K
Work period: 365 days

Bid submission

Closed

Closed on 30 Oct 2026, 05:00 PM

Bid submission for this tender has closed. Browse closed tenders in the archive →

About this tender

CE RW I has invited bids for “Construction of H.L. Bridge over Gendajore Nallah on Jarabaga Bhatipada to Bichhukhalia Nuadihi Road” in Kuchinda, Bargarh district, Odisha. The estimated tender value is ₹3.91 crore and the completion period is 365 days. Bids must be submitted by 30 Oct 2026, 05:00 PM.

Bid readiness

Based on the tender, not your profile

Not available: Bid submission has closed
Done: BOQ available · 38 items
Done: DTCN analysed · 39 requirements extracted
Done: 13 required documents identified
Needs review: Experience requirement needs review
Needs review: Financial requirements need review

Review requirements

Important dates

All times IST, as published on the portal

Published16 Oct 2026, 11:00 AM
Document downloadUntil 30 Oct 2026
Submission deadline30 Oct 2026, 05:00 PM
Bid opening31 Oct 2026, 11:00 AM

Tender intelligence

Eligibility & bid requirements

DTCN analysed39 requirements extracted13 documents identifiedExtracted from the official tender document

The Rural Development Department, Government of Odisha, invites percentage rate e-tenders for the construction of multiple High-Level (HL) Bridges in the districts of Baragada and Sambalpur. The estimated costs for these bridge works range from approximately 262.47 lakhs to 687.73 lakhs, excluding GST. Contractors registered with the Government of Odisha or equivalent class from other State Governments/Railways/CPWD/MES, including Joint Ventures, are eligible to bid, provided they meet specific experience and financial criteria. The bid submission deadline is October 30, 2026, at 5:00 PM.

Eligibility

8 items

Contractors must be registered with the Government of Odisha or of equivalent class from other State Government/Railways/CPWD/MES.
Joint Ventures are allowed for works exceeding Rs 10.00 crore, with a maximum of three constituents, and the lead partner must be a registered Contractor of appropriate class of the State.
Contractors must not have abandoned any similar work or had their contract rescinded in the last five years.

Show 5 more

Bidders must possess a valid Registration Certificate of the required class as mentioned in the Annexure (e.g., 'A' Class, 'A' & 'B' Class, 'A' & 'Spl' Class).
Bidders must have an up-to-date GSTIN Certificate and PAN Card.
For works valued up to Rs 5.00 crores, bidders only need to meet clauses 14(a), (b), (c), (d), and 14(h).
Bidders must furnish information on existing commitments (work in hand) as per Schedule-G or an affidavit for nil work in hand.
SC and ST Category Contractors with 'B' Class registration are eligible for a 10% price preference.

Source: Original DTCNView source document

Experience

1 item

For works valued more than Rs 5.00 crores, bidders must have executed similar nature of work worth 75% of the estimated cost in any three financial years of the last five preceding years (2021-22 to 2025-26).

Source: Original DTCNView source document

Financial

7 items

Bidders must have a total financial turnover in Civil Engineering works not less than the estimated cost put to tender during any three financial years of the last five preceding financial years (2021-22 to 2025-26).
The assessed available Bid Capacity must be more than the total estimated cost of the works.
EMD is required at 1% of the estimated cost, to be submitted online.

Show 4 more

Additional Performance Security (APS) is required if the bid price is below the estimated cost by 10% or more, ranging from 0.1% to 1% plus 0.2% for every percentage below 20%.
APS must be furnished within seven days of the Letter of Acceptance (LOA) in the form of a Term Deposit Receipt or Bank Guarantee.
Failure to furnish APS or execute the agreement will result in debarment for 180 days and potential blacklisting.
The security deposit will be refunded after two years of completion of the work and payment of the final bill, without interest.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

14 items

Bidders must have in possession (owned or on hire/lease) specific machineries required for the execution of the work as per relevant clauses of the Ministry of Road Transport and Highways (5th Revision) specifications.
For Open foundation bridges, required machinery includes 1 Hydraulic Excavator, 1 Vibratory Roller/Soil Compactor (8-10 ton), 1 Self-loading Concrete Mixer with batch mix arrangement, and 1 Generator – 33 KVA.
For Well foundation bridges, required machinery includes 1 Hydraulic Excavator, 1 Vibratory Roller/Soil Compactor (8-10 ton), 1 Self-loading Concrete Mixer with batch mix arrangement, 1 Crawler Crane, and 1 Generator – 33 KVA.

Show 11 more

For Pile foundation bridges, required machinery includes 1 Hydraulic Excavator, 1 Vibratory Roller/Soil Compactor (8-10 ton), 1 Self-loading Concrete Mixer with batch mix arrangement, 1 Piling Rig with Bentonite Pump, and 1 Generator – 33 KVA.
Proof of ownership for machinery must be furnished via invoices, sale deeds, or valid lease agreements with lessor's ownership documents.
Lease/hire agreements for equipment must be on a long-term basis for a minimum period equal to the intended completion period plus 90 days from the last date of bid receipt.
Super Class contractors must employ two Graduate Engineers and two Diploma holders from Odisha.
Special Class contractors must employ one Graduate Engineer and two Diploma Holders from Odisha.
'A' Class contractors must employ one Graduate Engineer or two Diploma Holders from Odisha.
All reinforced cement concrete work must conform to IRC Code and Bridge Code section I, II, III, IV and VII & latest design criteria for prestressed concrete bridges.
MoSRT&H Specification for Road & Bridge work (Latest Revision) shall be the guiding book for execution, quality assurance, specification and measurement.
Steel shuttering & centring, lined with suitable sheeting, must be used and made leak proof and water tight.
Concrete must be machine mixed unless otherwise ordered.
Cement, steel, paint, and bitumen must be of approved quality and specification, tested in the Departmental Laboratory, and approved before use.

Source: Original DTCNView source document

Contract conditions

9 items

The bid shall remain open for acceptance for a period of ninety days from the last date of receipt of bids.
The amount put to bid is exclusive of GST; bidders must offer rates excluding GST, which will be paid over the work bill amount.
The time for completion for individual works ranges from 12 to 15 calendar months as specified in the Annexure.

Show 6 more

If the L1 bidder fails to turn up for agreement, they will be debarred for three years and blacklisted; the L2 bidder may be called if they negotiate to the L1 rate.
The quantity mentioned can be increased or reduced by up to 10% for individual items, subject to a maximum of 5% over the estimated cost.
Liquidated damages will be imposed if the contractor fails to achieve the milestones in the work programme.
The contractor is liable to fully indemnify the department for compensation under the Workman Compensation Act.
The contractor must abide by the fair wages clause and not employ child labor.
The authority reserves the right to reject any or all tenders without assigning any reason.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Bill of quantities

38 priced items · ₹3.91 Cr (₹3,91,28,096)

Download BOQ file

Major components

Share of BOQ amount, grouped by item description

Doors, windows & steelwork32%₹1.26 Cr
Concrete & RCC23%₹89.29 L
Road & bituminous work10%₹40.76 L
Earthwork & excavation9%₹34.09 L
Reinforcement steel2%₹8.94 L
Plumbing & water supply0%₹1.22 L

Largest items

By amount

Labour for cutting, bending, Binding T.S Road including cost & carriage of MS rod.Item 15 · 1,095.9 qtl₹1.00 Cr
P.C.C. M15 in sub structure in headwall & pipe joints etc.etc. B) Up to BedItem 5 · 522.73 cum₹34.51 L
(D) Abutments & Piers i) In foundationItem 10 · 342.89 cum₹33.72 L
ii) Above BedItem 11 · 323.3 cum₹32.51 L
R.C.C M30 using 20mm down graded HG chips etc complete. (A) Deck slabItem 7 · 222.38 cum₹26.54 L

Tender details

Tender reference: Bridge Tender Online RWCSBP-26/2026-27
Tender ID: 2026_CERWI_143742_1
District: Bargarh
Location: Kuchinda
Tender type: Open Tender
Tender category: Works
Period of work: 365 days

Show all 9 fields

Product category: Civil Works - Bridges
Pincode: 768028

Authority

State
Government of Odisha
Department
CE RW I
Organisation
RWCIRCLE-SAMBALPUR
Inviting authority
Circle Officer

All CE RW I tenders in Bargarh →

Costs

Estimated value: ₹3,91,28,096; ₹3.91 crore
EMD / bid security: ₹3,91,281; Exemption available for eligible bidders
Tender fee: ₹10,000; Cost of bid document

Bid validity: 90 days

Security & deductions from the DTCN (5)

EMD is required at 1% of the estimated cost, to be submitted online.
Additional Performance Security (APS) is required if the bid price is below the estimated cost by 10% or more, ranging from 0.1% to 1% plus 0.2% for every percentage below 20%.
APS must be furnished within seven days of the Letter of Acceptance (LOA) in the form of a Term Deposit Receipt or Bank Guarantee.
Failure to furnish APS or execute the agreement will result in debarment for 180 days and potential blacklisting.
The security deposit will be refunded after two years of completion of the work and payment of the final bill, without interest.

Source: Original DTCN

Frequently asked questions

About this tender

Eligibility & bid requirements

DTCN analysed39 requirements extracted13 documents identifiedExtracted from the official tender document

Eligibility

8 items

Contractors must be registered with the Government of Odisha or of equivalent class from other State Government/Railways/CPWD/MES.
Joint Ventures are allowed for works exceeding Rs 10.00 crore, with a maximum of three constituents, and the lead partner must be a registered Contractor of appropriate class of the State.
Contractors must not have abandoned any similar work or had their contract rescinded in the last five years.

Show 5 more

Bidders must possess a valid Registration Certificate of the required class as mentioned in the Annexure (e.g., 'A' Class, 'A' & 'B' Class, 'A' & 'Spl' Class).
Bidders must have an up-to-date GSTIN Certificate and PAN Card.
For works valued up to Rs 5.00 crores, bidders only need to meet clauses 14(a), (b), (c), (d), and 14(h).
Bidders must furnish information on existing commitments (work in hand) as per Schedule-G or an affidavit for nil work in hand.
SC and ST Category Contractors with 'B' Class registration are eligible for a 10% price preference.

Source: Original DTCNView source document

Experience

1 item

For works valued more than Rs 5.00 crores, bidders must have executed similar nature of work worth 75% of the estimated cost in any three financial years of the last five preceding years (2021-22 to 2025-26).

Source: Original DTCNView source document

Financial

7 items

Bidders must have a total financial turnover in Civil Engineering works not less than the estimated cost put to tender during any three financial years of the last five preceding financial years (2021-22 to 2025-26).
The assessed available Bid Capacity must be more than the total estimated cost of the works.
EMD is required at 1% of the estimated cost, to be submitted online.

Show 4 more

Additional Performance Security (APS) is required if the bid price is below the estimated cost by 10% or more, ranging from 0.1% to 1% plus 0.2% for every percentage below 20%.
APS must be furnished within seven days of the Letter of Acceptance (LOA) in the form of a Term Deposit Receipt or Bank Guarantee.
Failure to furnish APS or execute the agreement will result in debarment for 180 days and potential blacklisting.
The security deposit will be refunded after two years of completion of the work and payment of the final bill, without interest.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

14 items

Bidders must have in possession (owned or on hire/lease) specific machineries required for the execution of the work as per relevant clauses of the Ministry of Road Transport and Highways (5th Revision) specifications.
For Open foundation bridges, required machinery includes 1 Hydraulic Excavator, 1 Vibratory Roller/Soil Compactor (8-10 ton), 1 Self-loading Concrete Mixer with batch mix arrangement, and 1 Generator – 33 KVA.
For Well foundation bridges, required machinery includes 1 Hydraulic Excavator, 1 Vibratory Roller/Soil Compactor (8-10 ton), 1 Self-loading Concrete Mixer with batch mix arrangement, 1 Crawler Crane, and 1 Generator – 33 KVA.

Show 11 more

For Pile foundation bridges, required machinery includes 1 Hydraulic Excavator, 1 Vibratory Roller/Soil Compactor (8-10 ton), 1 Self-loading Concrete Mixer with batch mix arrangement, 1 Piling Rig with Bentonite Pump, and 1 Generator – 33 KVA.
Proof of ownership for machinery must be furnished via invoices, sale deeds, or valid lease agreements with lessor's ownership documents.
Lease/hire agreements for equipment must be on a long-term basis for a minimum period equal to the intended completion period plus 90 days from the last date of bid receipt.
Super Class contractors must employ two Graduate Engineers and two Diploma holders from Odisha.
Special Class contractors must employ one Graduate Engineer and two Diploma Holders from Odisha.
'A' Class contractors must employ one Graduate Engineer or two Diploma Holders from Odisha.
All reinforced cement concrete work must conform to IRC Code and Bridge Code section I, II, III, IV and VII & latest design criteria for prestressed concrete bridges.
MoSRT&H Specification for Road & Bridge work (Latest Revision) shall be the guiding book for execution, quality assurance, specification and measurement.
Steel shuttering & centring, lined with suitable sheeting, must be used and made leak proof and water tight.
Concrete must be machine mixed unless otherwise ordered.
Cement, steel, paint, and bitumen must be of approved quality and specification, tested in the Departmental Laboratory, and approved before use.

Source: Original DTCNView source document

Contract conditions

9 items

The bid shall remain open for acceptance for a period of ninety days from the last date of receipt of bids.
The amount put to bid is exclusive of GST; bidders must offer rates excluding GST, which will be paid over the work bill amount.
The time for completion for individual works ranges from 12 to 15 calendar months as specified in the Annexure.

Show 6 more

If the L1 bidder fails to turn up for agreement, they will be debarred for three years and blacklisted; the L2 bidder may be called if they negotiate to the L1 rate.
The quantity mentioned can be increased or reduced by up to 10% for individual items, subject to a maximum of 5% over the estimated cost.
Liquidated damages will be imposed if the contractor fails to achieve the milestones in the work programme.
The contractor is liable to fully indemnify the department for compensation under the Workman Compensation Act.
The contractor must abide by the fair wages clause and not employ child labor.
The authority reserves the right to reject any or all tenders without assigning any reason.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Costs

Estimated value

₹3,91,28,096

₹3.91 crore

EMD / bid security

₹3,91,281

Exemption available for eligible bidders

Tender fee

₹10,000

Cost of bid document

Bid validity: 90 days

Security & deductions from the DTCN (5)

EMD is required at 1% of the estimated cost, to be submitted online.
Additional Performance Security (APS) is required if the bid price is below the estimated cost by 10% or more, ranging from 0.1% to 1% plus 0.2% for every percentage below 20%.
APS must be furnished within seven days of the Letter of Acceptance (LOA) in the form of a Term Deposit Receipt or Bank Guarantee.
Failure to furnish APS or execute the agreement will result in debarment for 180 days and potential blacklisting.
The security deposit will be refunded after two years of completion of the work and payment of the final bill, without interest.

Source: Original DTCN

Frequently asked questions

Construction of H.L. Bridge over Gendajore Nallah on Jarabaga Bhatipada to Bichhukhalia Nuadihi Road

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

Construction of H.L. Bridge over Gendajore Nallah on Jarabaga Bhatipada to Bichhukhalia Nuadihi Road

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more