What is the last date to bid for this tender?

Bids must be submitted on the Odisha eProcurement portal (tendersodisha.gov.in) by 05 Nov 2026, 05:00 PM. Bids are scheduled to open on 06 Nov 2026, 11:30 AM.

What is the estimated value of this tender?

The estimated tender value is ₹26.23 Cr (₹26,23,01,262).

How much EMD is required?

The EMD (bid security) is ₹26.23 L (₹26,23,100). The portal lists EMD exemption as available for eligible bidders — check the DTCN for who qualifies.

Who can bid for this tender?

The DTCN states: Contractors must be Special/Super Class registered with State Governments or equivalent Grade/Class registered with Central Government/MES/Railways for civil works; Joint Venture firms are not eligible.

What work experience is required?

As extracted from the DTCN: The prospective bidder must have completed or substantially completed at least one similar nature of bridge work with pile/well foundation, structurally completed within the last five years, with a value of at least 40% of the estimated cost (Rs. 1049.21 lakh excluding GST); Average annual turnover for civil construction works over the last five years must not be less than 40% of the estimated cost (Rs. 1049.21 lakh excluding GST), updated to the base year 2026-27.

What is the completion period?

The period of work is 730 days, and bids must remain valid for 90 days.

Which department issued this tender?

This tender was issued by EIC-CIVIL; the tender inviting authority is the Chief Engineer, Bridges-I, Odisha.

What documents are required to submit a bid?

The DTCN lists 15 documents, including GSTIN, Registration Certificate, Affidavit (e-payment from own account), No Relationship Certificate (Schedule-A), List of similar projects executed (Schedule-D1), Annual Turnover certificate from Chartered Accountant (Schedule-H), and 9 more.

OtherLive

Construction of proposed ROB at Km 426/21-23 in lieu of LC No.184 at Km. 426/21-23 in between BBSR New and Mancheswar Railway Stations on Howrah-Chennai Main Line in the District of Khordha under State Plan for the year 2026-27

In the District of Khordha, Khordha EIC-CIVIL

Tender ID 2026_EICCL_143748_1Ref CE-BRIDGES-I-17/2026-27

Estimated value: ₹26.23 Cr
EMD: ₹26.23 L; Exemption available
Tender fee: ₹10.0K
Work period: 730 days

Closing in

3 days left

05 Nov 2026, 05:00 PM

About this tender

EIC-CIVIL has invited bids for “Construction of proposed ROB at Km 426/21-23 in lieu of LC No.184 at Km. 426/21-23 in between BBSR New and Mancheswar Railway Stations on Howrah-Chennai Main Line in the District of Khordha under State Plan for the year 2026-27” in In the District of Khordha, Khordha district, Odisha. The estimated tender value is ₹26.23 crore and the completion period is 730 days. Bids must be submitted by 05 Nov 2026, 05:00 PM.

Bid readiness

Based on the tender, not your profile

Done: Tender is currently open
Done: BOQ available · 52 items
Done: DTCN analysed · 61 requirements extracted
Done: 15 required documents identified
Needs review: Experience requirement needs review
Needs review: Financial requirements need review

Review requirements

Important dates

All times IST, as published on the portal

Published16 Oct 2026, 10:00 AM
Document downloadUntil 05 Nov 2026
Submission deadline· 3 days left05 Nov 2026, 05:00 PM
Bid opening06 Nov 2026, 11:30 AM

Tender intelligence

Eligibility & bid requirements

DTCN analysed61 requirements extracted15 documents identifiedExtracted from the official tender document

This tender is for the construction of a proposed Road Over Bridge (ROB) at KM 426/21-23 in Khordha district, Odisha, with an estimated cost of Rs. 26,23,01,262.00. The project has a completion period of 24 calendar months. Bidders must be Special/Super Class contractors registered with State or Central Governments, and Joint Ventures are not eligible. A key requirement is demonstrating experience in similar bridge work and meeting specific annual turnover and bid capacity criteria.

Eligibility

5 items

Contractors must be Special/Super Class registered with State Governments or equivalent Grade/Class registered with Central Government/MES/Railways for civil works.
Joint Venture firms are not eligible.
An applicant or any of its constituent partners whose contract for any work has been rescinded or who has abandoned any work in the last five years is debarred from qualification.

Show 2 more

Contractors not registered with the Government of Odisha can participate but must register with the appropriate authority before work award.
Contractors must possess a valid license from licensing authorities of the labour Department if undertaking work through labour (under section 12 of Contractors Labour (Regulation and Abolition) Act. 1970).

Source: Original DTCNView source document

Experience

2 items

The prospective bidder must have completed or substantially completed at least one similar nature of bridge work with pile/well foundation, structurally completed within the last five years, with a value of at least 40% of the estimated cost (Rs. 1049.21 lakh excluding GST).
Average annual turnover for civil construction works over the last five years must not be less than 40% of the estimated cost (Rs. 1049.21 lakh excluding GST), updated to the base year 2026-27.

Source: Original DTCNView source document

Financial

14 items

Available bid capacity at the expected time of bidding must be more than the total estimated cost of the work.
Contractors exempted from EMD payment must upload documentary evidence for eligibility.
The EMD/Bid Security amount is Rs. 26,23,100.00, to be submitted online.

Show 11 more

Additional Performance Security (APS) will be obtained on an incremental basis if the accepted bid price is lower than the Cost Put to Tender, calculated based on the Rounding Off of Percentage Less (ROPL).
If the accepted bid price has an ROPL up to (-)10%, no APS is required.
If ROPL is below (-)10% but not below (-)20%, APS is 0.2% for every percentage below (-)10%.
If ROPL is below (-)20% but not below (-)30%, APS is 0.3% for every percentage below (-)20% plus 2% of the accepted bid price.
If ROPL is below (-)30% or more, APS is 0.5% for every percentage below (-)30% plus 5% of the accepted bid price.
APS must be furnished within seven days of the Letter of Acceptance (LoA) in the form of a Term Deposit Receipt or Bank Guarantee.
Failure to furnish APS will result in bid cancellation and debarment for 180 days, with blacklisting proceedings initiated.
APS shall be refunded immediately on successful completion of the work within seven days of issuance of Completion Certificate/Provisional Completion Certificate.
The Initial Security Deposit (ISD), Performance Security, and Retention Money are refundable after the Defect Liability Period.
Retention Money can be replaced with bank guarantee(s) of equal amount upon contractor's request.
CESS @ 1% of each bill amount will be deducted.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

18 items

Contractors must furnish a certificate stating no relation to any officer in the rank of Assistant Engineer & above in State P.W.D. or Assistant/Under Secretary & above in Works Department.
Super Class contractors must employ two Graduate Engineers and two Diploma holders belonging to Odisha.
Special Class contractors must employ one Graduate Engineer and two Diploma Holders belonging to Odisha.

Show 15 more

'A' Class contractors must employ one Graduate Engineer or two Diploma Holders belonging to Odisha.
The contractor must furnish evidence of ownership of principal machineries/equipments as per Annexure-I of Schedule-C and secure a minimum of 80% marks for this, otherwise the tender is liable for rejection.
Required plant and machinery include: Steel Centering & shuttering materials (1500 Sqm), Cement Concrete Batch Mix Plant (30 cum/hour - 1 No.), Transit Mixer (2 Nos.), Vibratory roller (1 No).
Contractors intending to hire/lease equipment must furnish proof of ownership from the company/person providing equipment, along with contracts/agreements/lease deeds for a minimum period equal to the intended completion period plus 90 days.
All reinforced cement concrete work must conform to IRC Code and Bridge Code section I, II, III, IV and VII & latest design criteria for prestressed concrete bridges issued by MoSRT&H, Govt. of India.
MoSRT&H Specification for Road & Bridge work (Latest Revision) shall be the guiding book for execution, quality assurance, specification and measurement.
Steel shuttering & centering must be used, lined with suitable sheeting, and made leak-proof and water-tight.
Concrete must be machine mixed unless otherwise ordered in writing by the Executive Engineer.
Cement shall be used by bags, with one bag weighing fifty (50) Kg.
The contractor must arrange materials like Steel, Cement, paint, and bitumen of approved quality and specification at their own cost.
Concrete test specimens (150mm × 150mm × 150mm) must be taken for each structural member and tested in the Departmental Quality Control and Research Laboratory, with costs borne by the contractor.
The maximum permissible tilt in well sinking is 1:80 and shift is 150mm to the normal direction; remedial measures for excess tilt/shift are at no extra cost.
The contractor must conduct their own boring before starting work to ascertain SBC and credibility of strata at founding level.
The contractor shall employ one or more Engineering Graduates or Diploma holders as apprentices if the work exceeds Rs. 2,50,000/-, with emoluments not less than equivalent government personnel.
The contractor is responsible for procuring and storing explosives for blasting operations.

Source: Original DTCNView source document

Contract conditions

22 items

The completion period for the work is 24 calendar months.
The bid validity period is 90 days after the deadline date for submission of bids.
The Defect Liability Period is 10 years.

Show 19 more

The Maintenance Period is 10 years.
If the L1 bidder fails to execute the agreement, they will be debarred for three years and blacklisted; the L2 bidder may be considered if they negotiate at par with L1.
The minimum period of blocking portal registration for violations is 180 days.
GST as applicable on works contract shall be paid over the bill amount.
The contractor must pay royalty to the Government for minor minerals and produce supporting documents, otherwise the amount will be recovered from bills.
No interest is chargeable for dues or additional dues.
The contractor is liable to indemnify the department for compensation under the Workman Compensation Act.
The contractor must abide by the fair wages clause and not employ child labour.
The contractor's rates must be inclusive of all costs including carriage of materials, incidentals, taxes, tolls, and construction/maintenance of temporary structures.
No extra payment will be made for bench marks, level pillars, profiles, benching, and leveling the ground.
No claim will be entertained for extra items or quantities unless a written order is obtained and rates settled beforehand.
The contractor must abide by the C.P.W.D. safety code rules.
The contractor will be responsible for loss or damage of departmental materials.
A penalty equivalent to five times the price of materials will be imposed if the contractor removes Government materials dishonestly.
The Department may supply materials at stock issue rates or market rates, whichever is higher.
The contractor must arrange cement, steel, bitumen, and other materials from approved manufacturers and get them tested.
No claim for carriage of water will be entertained.
If more than one bid is quoted as lowest, a transparent lottery system will be used to finalize the tender.
SC and ST Category Contractors receive a 10% price preference; if their rate matches the lowest after preference, a lottery system will be used.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Bill of quantities

52 priced items · ₹26.23 Cr (₹26,23,01,262)

Download BOQ file

Major components

Share of BOQ amount, grouped by item description

Reinforcement steel72%₹18.82 Cr
Road & bituminous work13%₹3.39 Cr
Concrete & RCC11%₹2.91 Cr
Earthwork & excavation1%₹18.20 L
Flooring & tiling1%₹16.94 L
Plaster, paint & finishing0%₹8.43 L

Largest items

By amount

Supplying ,Cutting, Bending, Binding, Straightening, Placing HYSD bars confirming to grade I.S.1786-1985 (Fe-…Item 43 · 1,241.08 mt₹11.30 Cr
Providing and laying Reinforced Cement Concrete of Grade M-35 in Girder super-structure complete as per drawi…Item 31 · 1,019.3 cum₹2.16 Cr
Reinforced Cement Concrete of M-35 grade bored cast-in-situ pile 1200mm diameter for bridges excluding cost o…Item 24 · 1,507.6 rm₹1.74 Cr
Providing and laying Reinforced Cement Concrete of Grade M-35 in deck slab super-structure complete as per dr…Item 33 · 851.44 cum₹1.45 Cr
Providing and laying dense graded bituminous macadam with hot mix plant using crushed aggregates of specified…Item 7 · 779.39 cum₹1.01 Cr

Tender details

Tender reference: CE-BRIDGES-I-17/2026-27
Tender ID: 2026_EICCL_143748_1
District: Khordha
Location: In the District of Khordha
Tender type: Open Tender
Tender category: Works
Period of work: 730 days

Show all 9 fields

Product category: Civil Works - Bridges
Pincode: 751001

Authority

State
Government of Odisha
Department
EIC-CIVIL
Inviting authority
Chief Engineer, Bridges-I, Odisha

All EIC-CIVIL tenders in Khordha →

Costs

Estimated value: ₹26,23,01,262; ₹26.23 crore
EMD / bid security: ₹26,23,100; Exemption available for eligible bidders
Tender fee: ₹10,000; Cost of bid document

Bid validity: 90 days

Security & deductions from the DTCN (13)

Contractors exempted from EMD payment must upload documentary evidence for eligibility.
The EMD/Bid Security amount is Rs. 26,23,100.00, to be submitted online.
Additional Performance Security (APS) will be obtained on an incremental basis if the accepted bid price is lower than the Cost Put to Tender, calculated based on the Rounding Off of Percentage Less (ROPL).
If the accepted bid price has an ROPL up to (-)10%, no APS is required.
If ROPL is below (-)10% but not below (-)20%, APS is 0.2% for every percentage below (-)10%.
If ROPL is below (-)20% but not below (-)30%, APS is 0.3% for every percentage below (-)20% plus 2% of the accepted bid price.
If ROPL is below (-)30% or more, APS is 0.5% for every percentage below (-)30% plus 5% of the accepted bid price.
APS must be furnished within seven days of the Letter of Acceptance (LoA) in the form of a Term Deposit Receipt or Bank Guarantee.
Failure to furnish APS will result in bid cancellation and debarment for 180 days, with blacklisting proceedings initiated.
APS shall be refunded immediately on successful completion of the work within seven days of issuance of Completion Certificate/Provisional Completion Certificate.
The Initial Security Deposit (ISD), Performance Security, and Retention Money are refundable after the Defect Liability Period.
Retention Money can be replaced with bank guarantee(s) of equal amount upon contractor's request.
CESS @ 1% of each bill amount will be deducted.

Source: Original DTCN

Frequently asked questions

About this tender

Eligibility & bid requirements

DTCN analysed61 requirements extracted15 documents identifiedExtracted from the official tender document

Eligibility

5 items

Contractors must be Special/Super Class registered with State Governments or equivalent Grade/Class registered with Central Government/MES/Railways for civil works.
Joint Venture firms are not eligible.
An applicant or any of its constituent partners whose contract for any work has been rescinded or who has abandoned any work in the last five years is debarred from qualification.

Show 2 more

Contractors not registered with the Government of Odisha can participate but must register with the appropriate authority before work award.
Contractors must possess a valid license from licensing authorities of the labour Department if undertaking work through labour (under section 12 of Contractors Labour (Regulation and Abolition) Act. 1970).

Source: Original DTCNView source document

Experience

2 items

The prospective bidder must have completed or substantially completed at least one similar nature of bridge work with pile/well foundation, structurally completed within the last five years, with a value of at least 40% of the estimated cost (Rs. 1049.21 lakh excluding GST).
Average annual turnover for civil construction works over the last five years must not be less than 40% of the estimated cost (Rs. 1049.21 lakh excluding GST), updated to the base year 2026-27.

Source: Original DTCNView source document

Financial

14 items

Available bid capacity at the expected time of bidding must be more than the total estimated cost of the work.
Contractors exempted from EMD payment must upload documentary evidence for eligibility.
The EMD/Bid Security amount is Rs. 26,23,100.00, to be submitted online.

Show 11 more

Additional Performance Security (APS) will be obtained on an incremental basis if the accepted bid price is lower than the Cost Put to Tender, calculated based on the Rounding Off of Percentage Less (ROPL).
If the accepted bid price has an ROPL up to (-)10%, no APS is required.
If ROPL is below (-)10% but not below (-)20%, APS is 0.2% for every percentage below (-)10%.
If ROPL is below (-)20% but not below (-)30%, APS is 0.3% for every percentage below (-)20% plus 2% of the accepted bid price.
If ROPL is below (-)30% or more, APS is 0.5% for every percentage below (-)30% plus 5% of the accepted bid price.
APS must be furnished within seven days of the Letter of Acceptance (LoA) in the form of a Term Deposit Receipt or Bank Guarantee.
Failure to furnish APS will result in bid cancellation and debarment for 180 days, with blacklisting proceedings initiated.
APS shall be refunded immediately on successful completion of the work within seven days of issuance of Completion Certificate/Provisional Completion Certificate.
The Initial Security Deposit (ISD), Performance Security, and Retention Money are refundable after the Defect Liability Period.
Retention Money can be replaced with bank guarantee(s) of equal amount upon contractor's request.
CESS @ 1% of each bill amount will be deducted.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

18 items

Contractors must furnish a certificate stating no relation to any officer in the rank of Assistant Engineer & above in State P.W.D. or Assistant/Under Secretary & above in Works Department.
Super Class contractors must employ two Graduate Engineers and two Diploma holders belonging to Odisha.
Special Class contractors must employ one Graduate Engineer and two Diploma Holders belonging to Odisha.

Show 15 more

'A' Class contractors must employ one Graduate Engineer or two Diploma Holders belonging to Odisha.
The contractor must furnish evidence of ownership of principal machineries/equipments as per Annexure-I of Schedule-C and secure a minimum of 80% marks for this, otherwise the tender is liable for rejection.
Required plant and machinery include: Steel Centering & shuttering materials (1500 Sqm), Cement Concrete Batch Mix Plant (30 cum/hour - 1 No.), Transit Mixer (2 Nos.), Vibratory roller (1 No).
Contractors intending to hire/lease equipment must furnish proof of ownership from the company/person providing equipment, along with contracts/agreements/lease deeds for a minimum period equal to the intended completion period plus 90 days.
All reinforced cement concrete work must conform to IRC Code and Bridge Code section I, II, III, IV and VII & latest design criteria for prestressed concrete bridges issued by MoSRT&H, Govt. of India.
MoSRT&H Specification for Road & Bridge work (Latest Revision) shall be the guiding book for execution, quality assurance, specification and measurement.
Steel shuttering & centering must be used, lined with suitable sheeting, and made leak-proof and water-tight.
Concrete must be machine mixed unless otherwise ordered in writing by the Executive Engineer.
Cement shall be used by bags, with one bag weighing fifty (50) Kg.
The contractor must arrange materials like Steel, Cement, paint, and bitumen of approved quality and specification at their own cost.
Concrete test specimens (150mm × 150mm × 150mm) must be taken for each structural member and tested in the Departmental Quality Control and Research Laboratory, with costs borne by the contractor.
The maximum permissible tilt in well sinking is 1:80 and shift is 150mm to the normal direction; remedial measures for excess tilt/shift are at no extra cost.
The contractor must conduct their own boring before starting work to ascertain SBC and credibility of strata at founding level.
The contractor shall employ one or more Engineering Graduates or Diploma holders as apprentices if the work exceeds Rs. 2,50,000/-, with emoluments not less than equivalent government personnel.
The contractor is responsible for procuring and storing explosives for blasting operations.

Source: Original DTCNView source document

Contract conditions

22 items

The completion period for the work is 24 calendar months.
The bid validity period is 90 days after the deadline date for submission of bids.
The Defect Liability Period is 10 years.

Show 19 more

The Maintenance Period is 10 years.
If the L1 bidder fails to execute the agreement, they will be debarred for three years and blacklisted; the L2 bidder may be considered if they negotiate at par with L1.
The minimum period of blocking portal registration for violations is 180 days.
GST as applicable on works contract shall be paid over the bill amount.
The contractor must pay royalty to the Government for minor minerals and produce supporting documents, otherwise the amount will be recovered from bills.
No interest is chargeable for dues or additional dues.
The contractor is liable to indemnify the department for compensation under the Workman Compensation Act.
The contractor must abide by the fair wages clause and not employ child labour.
The contractor's rates must be inclusive of all costs including carriage of materials, incidentals, taxes, tolls, and construction/maintenance of temporary structures.
No extra payment will be made for bench marks, level pillars, profiles, benching, and leveling the ground.
No claim will be entertained for extra items or quantities unless a written order is obtained and rates settled beforehand.
The contractor must abide by the C.P.W.D. safety code rules.
The contractor will be responsible for loss or damage of departmental materials.
A penalty equivalent to five times the price of materials will be imposed if the contractor removes Government materials dishonestly.
The Department may supply materials at stock issue rates or market rates, whichever is higher.
The contractor must arrange cement, steel, bitumen, and other materials from approved manufacturers and get them tested.
No claim for carriage of water will be entertained.
If more than one bid is quoted as lowest, a transparent lottery system will be used to finalize the tender.
SC and ST Category Contractors receive a 10% price preference; if their rate matches the lowest after preference, a lottery system will be used.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Costs

Estimated value

₹26,23,01,262

₹26.23 crore

EMD / bid security

₹26,23,100

Exemption available for eligible bidders

Tender fee

₹10,000

Cost of bid document

Bid validity: 90 days

Security & deductions from the DTCN (13)

Contractors exempted from EMD payment must upload documentary evidence for eligibility.
The EMD/Bid Security amount is Rs. 26,23,100.00, to be submitted online.
Additional Performance Security (APS) will be obtained on an incremental basis if the accepted bid price is lower than the Cost Put to Tender, calculated based on the Rounding Off of Percentage Less (ROPL).
If the accepted bid price has an ROPL up to (-)10%, no APS is required.
If ROPL is below (-)10% but not below (-)20%, APS is 0.2% for every percentage below (-)10%.
If ROPL is below (-)20% but not below (-)30%, APS is 0.3% for every percentage below (-)20% plus 2% of the accepted bid price.
If ROPL is below (-)30% or more, APS is 0.5% for every percentage below (-)30% plus 5% of the accepted bid price.
APS must be furnished within seven days of the Letter of Acceptance (LoA) in the form of a Term Deposit Receipt or Bank Guarantee.
Failure to furnish APS will result in bid cancellation and debarment for 180 days, with blacklisting proceedings initiated.
APS shall be refunded immediately on successful completion of the work within seven days of issuance of Completion Certificate/Provisional Completion Certificate.
The Initial Security Deposit (ISD), Performance Security, and Retention Money are refundable after the Defect Liability Period.
Retention Money can be replaced with bank guarantee(s) of equal amount upon contractor's request.
CESS @ 1% of each bill amount will be deducted.

Source: Original DTCN

Frequently asked questions

Construction of proposed ROB at Km 426/21-23 in lieu of LC No.184 at Km. 426/21-23 in between BBSR New and Mancheswar Railway Stations on Howrah-Chennai Main Line in the District of Khordha under State Plan for the year 2026-27

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

Construction of proposed ROB at Km 426/21-23 in lieu of LC No.184 at Km. 426/21-23 in between BBSR New and Mancheswar Railway Stations on Howrah-Chennai Main Line in the District of Khordha under State Plan for the year 2026-27

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more