What is the last date to bid for this tender?

Bids must be submitted on the Odisha eProcurement portal (tendersodisha.gov.in) by 03 Nov 2026, 05:00 PM. Bids are scheduled to open on 04 Nov 2026, 11:00 AM.

What is the estimated value of this tender?

The estimated tender value is ₹12.97 Cr (₹12,96,55,000).

How much EMD is required?

The EMD (bid security) is ₹12.97 L (₹12,96,550). The portal lists EMD exemption as available for eligible bidders — check the DTCN for who qualifies.

Who can bid for this tender?

The DTCN states: Contractor must be an eligible class of contractor of Government of Odisha or equivalent class of other State Government/Railways/CPWD/MES; Contractors registered outside Odisha can participate but must register with the appropriate authority of the State Government before work award.

What work experience is required?

As extracted from the DTCN: For works exceeding Rs. 5.00 crore, intending tenderers should have executed works (Buildings/Bridges/Major Irrigation Structures) worth 50% of the estimated cost put to tender during any 3 financial years taken together of the last preceding 8 years; To qualify for more than one work, the bidder must demonstrate having annual turnover, bid capacity, and works experience in aggregate if works value exceeds Rs. 5.00 crore.

What is the completion period?

The period of work is 450 days, and bids must remain valid for 90 days.

Which department issued this tender?

This tender was issued by CE RW I; the tender inviting authority is the Chief Engineer Buildings and Bridges.

What documents are required to submit a bid?

The DTCN lists 10 documents, including GSTIN, PAN Card, Registration Certificate, Affidavit regarding correctness of information/certificate, Work in hand (Format-II), Affidavit for not abandoning similar work or having contract rescinded in last 5 years (Schedule-B), and 4 more.

BuildingLive

Construction of Block Level Stadium under JHARIGAON Block (With Indoor Hall) in the district of Nabarangpur_building

Nabarangapur, Khordha CE RW I

Tender ID 2026_CERWI_143576_1Ref Tender Online 05-2026-27 (Buildings)

Estimated value: ₹12.97 Cr
EMD: ₹12.97 L; Exemption available
Tender fee: ₹10.0K
Work period: 450 days

Closing soon

2 days left

03 Nov 2026, 05:00 PM

About this tender

CE RW I has invited bids for “Construction of Block Level Stadium under JHARIGAON Block (With Indoor Hall) in the district of Nabarangpur_building” in Nabarangapur, Khordha district, Odisha. The estimated tender value is ₹12.97 crore and the completion period is 450 days. Bids must be submitted by 03 Nov 2026, 05:00 PM.

Bid readiness

Based on the tender, not your profile

Needs review: Tender is open — only 2 days left
Done: BOQ available · 611 items
Done: DTCN analysed · 75 requirements extracted
Done: 10 required documents identified
Needs review: Experience requirement needs review
Needs review: Financial requirements need review

Review requirements

Important dates

All times IST, as published on the portal

Published15 Oct 2026, 10:00 AM
Document downloadUntil 03 Nov 2026
Submission deadline· 2 days left03 Nov 2026, 05:00 PM
Bid opening04 Nov 2026, 11:00 AM

Tender intelligence

Eligibility & bid requirements

DTCN analysed75 requirements extracted10 documents identifiedExtracted from the official tender document

The Government of Odisha, Rural Development Department, invites percentage rate tenders for the construction and maintenance of Block Level Stadiums (Composite Building Works including Civil, E.I. & P.H.) across various districts in Odisha. The projects range in estimated cost from approximately 13.11 Crore to 16.91 Crore, with completion periods between 15 and 18 calendar months. Eligible contractors must be of 'A' or 'Special' class (Odisha PWD) or equivalent, and bids must be submitted online via e-procurement.

Eligibility

12 items

Contractor must be an eligible class of contractor of Government of Odisha or equivalent class of other State Government/Railways/CPWD/MES.
Contractors registered outside Odisha can participate but must register with the appropriate authority of the State Government before work award.
For estimated costs above Rs. 1.00 Crore and up to Rs. 20.00 Crore, 'A' class contractor (Odisha PWD) or relevant class of other licensing authorities is required.

Show 9 more

For estimated costs more than Rs. 6.00 Crore and up to Rs. 50.00 Crore, Special class contractor (Odisha PWD) or relevant class of other licensing authorities is required.
For estimated costs above Rs. 20.00 Crore, Super class contractor (Odisha PWD) or relevant class of other licensing authorities is required.
Tenderer must not have abandoned any work of similar nature, nor had their contract rescinded during the last five years.
Tenderer must not be related to any officer in the rank of Assistant Engineer & above in the state R.D. Department or Assistant/Under Secretary & above in the R.D. Department.
Tenderer must possess a valid Registration Certificate for the required class.
Civil Contractor must have a notarized agreement with a registered Electrical Contractor who has a valid license, GSTIN, and PAN.
Tenderers for works value up to Rs. 5.00 crores have no qualifying criteria except clauses 1(a), (b), (c), (d) & (e).
Bidders from outside the state without GSTIN clearance Certificate must submit an affidavit stating they are not registered under the GSTIN Act and have no liability, but must produce the certificate before contract award.
Bidders registered under other State Governments/MES/Railways/CPWD must register under the state PWD before signing the Agreement if successful.

Source: Original DTCNView source document

Experience

2 items

For works exceeding Rs. 5.00 crore, intending tenderers should have executed works (Buildings/Bridges/Major Irrigation Structures) worth 50% of the estimated cost put to tender during any 3 financial years taken together of the last preceding 8 years.
To qualify for more than one work, the bidder must demonstrate having annual turnover, bid capacity, and works experience in aggregate if works value exceeds Rs. 5.00 crore.

Source: Original DTCNView source document

Financial

9 items

The total financial turnover in respect of Civil Engineering works must be an amount not less than the amount put to tender during any 3 financial years taken together of the last preceding five financial years.
Available bid capacity at the expected time of bidding must be more than the total estimated cost of the works.
EMD required is 1% of the estimated cost, to be transferred online.

Show 6 more

If any Bidder/Tenderer withdraws their bid/tender before the said period or makes any modification, the earnest money shall be forfeited.
Upon acceptance of the tender, the successful tenderer shall deposit an additional sum towards initial security to make 2% of the work cost (together with EMD) and sign the agreement within 10 days.
Failure to deposit additional initial security or sign the contract within the stipulated time will result in forfeiture of EMD and withdrawal of tender acceptance.
Additional Performance Security (APS) will be obtained from the successful bidder if the bid amount is less than the estimated cost put to tender, calculated incrementally based on the 'Rounding Off of Percentage Less (ROPL)' of the accepted bid price.
APS must be submitted in the shape of Term Deposit Receipt or Bank Guarantee within seven days of issue of Letter of Acceptance (LoA), otherwise the bid will be cancelled, and the bidder debarred for 180 days.
The earnest money of unsuccessful tenderers will be credited after the tender is awarded to the successful tenderer and will not carry any interest.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

27 items

The work will have to be completed within the stipulated period as mentioned in the NIT commencing from the date of issue of work order.
Tenderers are required to submit a detailed program of work along with the tender.
The contractor must arrange all materials, machinery, T&P, carriage, and storing at the site at their own cost.

Show 24 more

Cement to be used must be Ordinary Portland cement (IS:269), High strength ordinary Portland cement (IS:8112), or Portland Slag Cement (IS:445), with prior approval of the Engineer.
Reinforcement/Tensioned steel must conform to IS:432 (Part-1) for Fe 250, IS:1139 for HYSD Fe 415, or IS:1786 for HYSD Fe 500.
The contractor must arrange cement (IDCOL, OCL L&T & SAIL, TISCO) and steel from approved manufacturers and get it tested and approved before use.
All required machinery for the work (Concrete Mixers, Vibrators, Road Rollers, Sheep foot rollers, etc.) must be arranged by the contractor at their own cost.
All reinforced cement concrete work should conform to Odisha Detailed Standard Specification and be of M. 150 and M. 200 equivalent to nominal proportion (1:2:4) (1:1/2:3) with minimum compressive strength of 150Kg.Cm2/200Kg.Cm.Sq. at 28 days.
Shuttering and centering shall be with seasoned sal wood planks lined with suitable setting and made leak proof, or alternatively steel shuttering and centering may be used.
The contractor must arrange for water supply for all works and make sanitary arrangements at his own cost for his labor camps.
The contractor must arrange adequate lighting arrangement for night work whenever necessary at his own cost.
Cement concrete in roof slab, beams etc., whenever prescribed, shall be machine mixed and vibrated, and the contractor should arrange his own concrete mixers, vibrator, pumps etc.
The contractor shall employ one or more Engineering Graduates or Diploma Engineers as apprentices for works costing Rs. 2.5 Lakhs or more, with specific stipend rates.
Special class contractors shall employ one Graduate Engineer and two Diploma Holders from Odisha; 'A' class contractors shall employ one Graduate Engineer or two Diploma Holders from Odisha.
Sanitary fixtures must be of best quality vitreous ware of porcelain from Hindustan Sanitary Ware/Parry Ware/Neycer ISI marked.
C.I. High Level Flushing Cisterns must be Sushila Industries Prabhat Iron Foundry/East India Steel/ISI marked.
H.C.I. Soil Waste Pipes must conform to I.S.I. 1729-1954, having I.S.I. Mark.
C.P. Bath Room Fittings must be ZJM/Kingstone/Jaquar I.S.I. marked and conforming to latest ISS.
G.I. Pipes (Medium Class) must be manufactured by TATA/JINDAL/B.ST. having I.S.I. Mark.
Bricks shall be locally available best quality clean burnt, with minimum crushing strength 75 Kg/Cm2 and not absorbing more than 20% water by weight.
Mortar shall be well mixed to a uniform color and consistency as specified, with sand measured on dry volume basis and cement mixed in 50 kg or 0.035 Cum batches.
Coarse aggregates shall be of hard granite stone conforming to I.S. 389, free from clay films, and from approved quarry and crusher broken.
Reinforcements shall be Mild steel Round Bars, cold twisted and deformed bars of steel of medium tensile strength as per drawing and design and directions, conforming to I.S.;226/1962 or IS:432/1966 - Grade-l.
For piling work, concrete must be controlled as per specifications for cement concrete and of grade specified on drawings, with minimum cement quantity as per IS 2911 (Part-III).
Bentonite used for piling must have a certificate from the manufacturer stating consignment properties and be mixed thoroughly with clean fresh water.
The contractor shall submit a description of the equipment and method of boring for checking and approval by the Engineer-in-charge.
For sports-related items, specific technical specifications are provided for Vinyl Flooring, Sports PVC Flooring, BWF Certified PVC Badminton Court, Cushioning System, AIFF/FIFA Compliant Portable & Movable Football Goal post, FIVB Compliant Portable & Movable Volleyball Post, Kho Kho Pole, TTFI/ITTF Certified Table Tennis Table, BWF Certified Movable Badminton Pole, BWF Certified Badminton Net, Badminton Rackets, Nylon Shuttlecock, Roofing System (SELF SUPPORTED SECRET FIX STANDING ROOFING SYSTEM), Aluminium Flashing, Gutters, Geo textile sheet, Sub-angular Sand, Angular Sand, Rounded Sand, a

Source: Original DTCNView source document

Contract conditions

25 items

The bid should be submitted on-line in the website www.tendersorissa.gov.in.
Bidders must possess compatible Digital Signature Certificates (DSC) of required Class.
Bids received online shall be opened at 11:00 AM on 04.11.2026.

Show 22 more

The amount put to tender is exclusive of GST; bidders should offer rates excluding GST, which will be paid over the work bill amount.
The bid for the work shall remain open for acceptance for a period of ninety days from the last date of receipt of bids.
Joint Venture/Consortium agreements/M.O.Us are not allowed to participate in the Bid.
All the rates & prices in the tender shall cover Cess, ferry, tollages charges, Royalties, Additional Charges, DMF (10% over Royalty), EMF (5% over Royalty), other charges but without GST.
The information on Existing Commitments (Work in hand) as on the date of this bid must be furnished as per Format-II, failing which the tender shall be rejected.
If more than one bid is quoted at or less than the estimated cost, the tender will be finalized through a transparent lottery system.
10% price preference shall be allowed only to Individual registered Contractors belonging to Schedule Caste and Schedule Tribe having Registration Certificate up to 'B' Class.
The contractor will be responsible for payment of all royalties, other charges for quarrying materials, local taxes (including state GST & income Tax), Ferry and Tollage charges, Octroi Taxes, and Cess.
The contractor should be fully liable to indemnify the department for payment of any compensation under 'Workmen' compensation Act VII to 1923.
The Government does not accept any responsibility for the correctness or completeness of the quantities shown in the schedule, which is liable to alteration.
No extension of time or escalation of price on account of arranging cement and steel shall be entertained in the future.
For the purpose of jurisdiction in the event of dispute, the contract should be deemed to have been entered into within the State of Odisha.
After the work is finished, all surplus materials and debris are to be removed by the contractor, and the ground cleaned and dressed; no extra payment will be made for this.
The contractor shall not interfere with the execution of water supply or Electrical fitting arrangement and any other works entrusted to any other agency.
The contractor will be responsible for the loss or damage of any departmental materials/equipment supplied to him during execution of the work.
No part of the contract shall be sub-let without written permission of the Superintending Engineer/Executive Engineer or transfer made by power of attorney.
The date of issue of the notice to the contractor to attend Division office for signing the agreement shall be treated as the date of commencement of work.
The tenderers are required to pay royalties of all materials as per the rate prescribed by State Govt. from time to time and produce receipts.
Testing charges for materials, including collection/transportation of samples, will be borne by the contractor.
The contractor will not claim anything from the Government if the work is curtailed or stopped at any stage.
If the tenderer backs out before acceptance of the tender, penal implication for forfeiture of E.M.D. will be levied.
The tenderer should not write anything on the unnumbered/blank pages of this schedule, as it may lead to rejection.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Bill of quantities

611 priced items · ₹12.51 Cr (₹12,50,67,369)

Download BOQ file

Major components

Share of BOQ amount, grouped by item description

Reinforcement steel15%₹1.85 Cr
Concrete & RCC11%₹1.38 Cr
Electrical7%₹83.53 L
Plaster, paint & finishing6%₹72.78 L
Road & bituminous work5%₹68.08 L
Doors, windows & steelwork5%₹60.38 L

Largest items

By amount

Providing & fixing TOR Fe-500 D grade reinforcement bars of approved makes for RCC work of required diameter…Item 24 · 1,260.46 qtl₹1.21 Cr
Supplying and filling with river sand of approved quality and specification from approved quarry, laying in l…Item 119 · 8,080.74 cum₹79.88 L
Preparation of fabrication drawing (shop drawing approved by EIC) and supply, fabrication, erection, testing…Item 60 · 27,415.76 kg₹53.30 L
Construction of granular sub-base by providing Close graded Granular subbase Grading-III material as per tabl…Item 105 · 1,785.16 cum₹43.87 L
Construction, Providing, Supplying and fixing the pre-cast , pre-tensioned SFRC compound wall poles of approv…Item 98 · 598.71 mtr₹34.43 L

Tender details

Tender reference: Tender Online 05-2026-27 (Buildings)
Tender ID: 2026_CERWI_143576_1
District: Khordha
Location: Nabarangapur
Tender type: National Competitive Bid
Tender category: Works
Period of work: 450 days

Show all 9 fields

Product category: Civil Works - Buildings
Pincode: 751001

Authority

State
Government of Odisha
Department
CE RW I
Inviting authority
Chief Engineer Buildings and Bridges

All CE RW I tenders in Khordha →

Costs

Estimated value: ₹12,96,55,000; ₹12.97 crore
EMD / bid security: ₹12,96,550; Exemption available for eligible bidders
Tender fee: ₹10,000; Cost of bid document

Bid validity: 90 days

Security & deductions from the DTCN (5)

EMD required is 1% of the estimated cost, to be transferred online.
Upon acceptance of the tender, the successful tenderer shall deposit an additional sum towards initial security to make 2% of the work cost (together with EMD) and sign the agreement within 10 days.
Failure to deposit additional initial security or sign the contract within the stipulated time will result in forfeiture of EMD and withdrawal of tender acceptance.
Additional Performance Security (APS) will be obtained from the successful bidder if the bid amount is less than the estimated cost put to tender, calculated incrementally based on the 'Rounding Off of Percentage Less (ROPL)' of the accepted bid price.
APS must be submitted in the shape of Term Deposit Receipt or Bank Guarantee within seven days of issue of Letter of Acceptance (LoA), otherwise the bid will be cancelled, and the bidder debarred for 180 days.

Source: Original DTCN

Frequently asked questions

About this tender

Eligibility & bid requirements

DTCN analysed75 requirements extracted10 documents identifiedExtracted from the official tender document

Eligibility

12 items

Contractor must be an eligible class of contractor of Government of Odisha or equivalent class of other State Government/Railways/CPWD/MES.
Contractors registered outside Odisha can participate but must register with the appropriate authority of the State Government before work award.
For estimated costs above Rs. 1.00 Crore and up to Rs. 20.00 Crore, 'A' class contractor (Odisha PWD) or relevant class of other licensing authorities is required.

Show 9 more

For estimated costs more than Rs. 6.00 Crore and up to Rs. 50.00 Crore, Special class contractor (Odisha PWD) or relevant class of other licensing authorities is required.
For estimated costs above Rs. 20.00 Crore, Super class contractor (Odisha PWD) or relevant class of other licensing authorities is required.
Tenderer must not have abandoned any work of similar nature, nor had their contract rescinded during the last five years.
Tenderer must not be related to any officer in the rank of Assistant Engineer & above in the state R.D. Department or Assistant/Under Secretary & above in the R.D. Department.
Tenderer must possess a valid Registration Certificate for the required class.
Civil Contractor must have a notarized agreement with a registered Electrical Contractor who has a valid license, GSTIN, and PAN.
Tenderers for works value up to Rs. 5.00 crores have no qualifying criteria except clauses 1(a), (b), (c), (d) & (e).
Bidders from outside the state without GSTIN clearance Certificate must submit an affidavit stating they are not registered under the GSTIN Act and have no liability, but must produce the certificate before contract award.
Bidders registered under other State Governments/MES/Railways/CPWD must register under the state PWD before signing the Agreement if successful.

Source: Original DTCNView source document

Experience

2 items

For works exceeding Rs. 5.00 crore, intending tenderers should have executed works (Buildings/Bridges/Major Irrigation Structures) worth 50% of the estimated cost put to tender during any 3 financial years taken together of the last preceding 8 years.
To qualify for more than one work, the bidder must demonstrate having annual turnover, bid capacity, and works experience in aggregate if works value exceeds Rs. 5.00 crore.

Source: Original DTCNView source document

Financial

9 items

The total financial turnover in respect of Civil Engineering works must be an amount not less than the amount put to tender during any 3 financial years taken together of the last preceding five financial years.
Available bid capacity at the expected time of bidding must be more than the total estimated cost of the works.
EMD required is 1% of the estimated cost, to be transferred online.

Show 6 more

If any Bidder/Tenderer withdraws their bid/tender before the said period or makes any modification, the earnest money shall be forfeited.
Upon acceptance of the tender, the successful tenderer shall deposit an additional sum towards initial security to make 2% of the work cost (together with EMD) and sign the agreement within 10 days.
Failure to deposit additional initial security or sign the contract within the stipulated time will result in forfeiture of EMD and withdrawal of tender acceptance.
Additional Performance Security (APS) will be obtained from the successful bidder if the bid amount is less than the estimated cost put to tender, calculated incrementally based on the 'Rounding Off of Percentage Less (ROPL)' of the accepted bid price.
APS must be submitted in the shape of Term Deposit Receipt or Bank Guarantee within seven days of issue of Letter of Acceptance (LoA), otherwise the bid will be cancelled, and the bidder debarred for 180 days.
The earnest money of unsuccessful tenderers will be credited after the tender is awarded to the successful tenderer and will not carry any interest.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

27 items

The work will have to be completed within the stipulated period as mentioned in the NIT commencing from the date of issue of work order.
Tenderers are required to submit a detailed program of work along with the tender.
The contractor must arrange all materials, machinery, T&P, carriage, and storing at the site at their own cost.

Show 24 more

Cement to be used must be Ordinary Portland cement (IS:269), High strength ordinary Portland cement (IS:8112), or Portland Slag Cement (IS:445), with prior approval of the Engineer.
Reinforcement/Tensioned steel must conform to IS:432 (Part-1) for Fe 250, IS:1139 for HYSD Fe 415, or IS:1786 for HYSD Fe 500.
The contractor must arrange cement (IDCOL, OCL L&T & SAIL, TISCO) and steel from approved manufacturers and get it tested and approved before use.
All required machinery for the work (Concrete Mixers, Vibrators, Road Rollers, Sheep foot rollers, etc.) must be arranged by the contractor at their own cost.
All reinforced cement concrete work should conform to Odisha Detailed Standard Specification and be of M. 150 and M. 200 equivalent to nominal proportion (1:2:4) (1:1/2:3) with minimum compressive strength of 150Kg.Cm2/200Kg.Cm.Sq. at 28 days.
Shuttering and centering shall be with seasoned sal wood planks lined with suitable setting and made leak proof, or alternatively steel shuttering and centering may be used.
The contractor must arrange for water supply for all works and make sanitary arrangements at his own cost for his labor camps.
The contractor must arrange adequate lighting arrangement for night work whenever necessary at his own cost.
Cement concrete in roof slab, beams etc., whenever prescribed, shall be machine mixed and vibrated, and the contractor should arrange his own concrete mixers, vibrator, pumps etc.
The contractor shall employ one or more Engineering Graduates or Diploma Engineers as apprentices for works costing Rs. 2.5 Lakhs or more, with specific stipend rates.
Special class contractors shall employ one Graduate Engineer and two Diploma Holders from Odisha; 'A' class contractors shall employ one Graduate Engineer or two Diploma Holders from Odisha.
Sanitary fixtures must be of best quality vitreous ware of porcelain from Hindustan Sanitary Ware/Parry Ware/Neycer ISI marked.
C.I. High Level Flushing Cisterns must be Sushila Industries Prabhat Iron Foundry/East India Steel/ISI marked.
H.C.I. Soil Waste Pipes must conform to I.S.I. 1729-1954, having I.S.I. Mark.
C.P. Bath Room Fittings must be ZJM/Kingstone/Jaquar I.S.I. marked and conforming to latest ISS.
G.I. Pipes (Medium Class) must be manufactured by TATA/JINDAL/B.ST. having I.S.I. Mark.
Bricks shall be locally available best quality clean burnt, with minimum crushing strength 75 Kg/Cm2 and not absorbing more than 20% water by weight.
Mortar shall be well mixed to a uniform color and consistency as specified, with sand measured on dry volume basis and cement mixed in 50 kg or 0.035 Cum batches.
Coarse aggregates shall be of hard granite stone conforming to I.S. 389, free from clay films, and from approved quarry and crusher broken.
Reinforcements shall be Mild steel Round Bars, cold twisted and deformed bars of steel of medium tensile strength as per drawing and design and directions, conforming to I.S.;226/1962 or IS:432/1966 - Grade-l.
For piling work, concrete must be controlled as per specifications for cement concrete and of grade specified on drawings, with minimum cement quantity as per IS 2911 (Part-III).
Bentonite used for piling must have a certificate from the manufacturer stating consignment properties and be mixed thoroughly with clean fresh water.
The contractor shall submit a description of the equipment and method of boring for checking and approval by the Engineer-in-charge.
For sports-related items, specific technical specifications are provided for Vinyl Flooring, Sports PVC Flooring, BWF Certified PVC Badminton Court, Cushioning System, AIFF/FIFA Compliant Portable & Movable Football Goal post, FIVB Compliant Portable & Movable Volleyball Post, Kho Kho Pole, TTFI/ITTF Certified Table Tennis Table, BWF Certified Movable Badminton Pole, BWF Certified Badminton Net, Badminton Rackets, Nylon Shuttlecock, Roofing System (SELF SUPPORTED SECRET FIX STANDING ROOFING SYSTEM), Aluminium Flashing, Gutters, Geo textile sheet, Sub-angular Sand, Angular Sand, Rounded Sand, a

Source: Original DTCNView source document

Contract conditions

25 items

The bid should be submitted on-line in the website www.tendersorissa.gov.in.
Bidders must possess compatible Digital Signature Certificates (DSC) of required Class.
Bids received online shall be opened at 11:00 AM on 04.11.2026.

Show 22 more

The amount put to tender is exclusive of GST; bidders should offer rates excluding GST, which will be paid over the work bill amount.
The bid for the work shall remain open for acceptance for a period of ninety days from the last date of receipt of bids.
Joint Venture/Consortium agreements/M.O.Us are not allowed to participate in the Bid.
All the rates & prices in the tender shall cover Cess, ferry, tollages charges, Royalties, Additional Charges, DMF (10% over Royalty), EMF (5% over Royalty), other charges but without GST.
The information on Existing Commitments (Work in hand) as on the date of this bid must be furnished as per Format-II, failing which the tender shall be rejected.
If more than one bid is quoted at or less than the estimated cost, the tender will be finalized through a transparent lottery system.
10% price preference shall be allowed only to Individual registered Contractors belonging to Schedule Caste and Schedule Tribe having Registration Certificate up to 'B' Class.
The contractor will be responsible for payment of all royalties, other charges for quarrying materials, local taxes (including state GST & income Tax), Ferry and Tollage charges, Octroi Taxes, and Cess.
The contractor should be fully liable to indemnify the department for payment of any compensation under 'Workmen' compensation Act VII to 1923.
The Government does not accept any responsibility for the correctness or completeness of the quantities shown in the schedule, which is liable to alteration.
No extension of time or escalation of price on account of arranging cement and steel shall be entertained in the future.
For the purpose of jurisdiction in the event of dispute, the contract should be deemed to have been entered into within the State of Odisha.
After the work is finished, all surplus materials and debris are to be removed by the contractor, and the ground cleaned and dressed; no extra payment will be made for this.
The contractor shall not interfere with the execution of water supply or Electrical fitting arrangement and any other works entrusted to any other agency.
The contractor will be responsible for the loss or damage of any departmental materials/equipment supplied to him during execution of the work.
No part of the contract shall be sub-let without written permission of the Superintending Engineer/Executive Engineer or transfer made by power of attorney.
The date of issue of the notice to the contractor to attend Division office for signing the agreement shall be treated as the date of commencement of work.
The tenderers are required to pay royalties of all materials as per the rate prescribed by State Govt. from time to time and produce receipts.
Testing charges for materials, including collection/transportation of samples, will be borne by the contractor.
The contractor will not claim anything from the Government if the work is curtailed or stopped at any stage.
If the tenderer backs out before acceptance of the tender, penal implication for forfeiture of E.M.D. will be levied.
The tenderer should not write anything on the unnumbered/blank pages of this schedule, as it may lead to rejection.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Costs

Estimated value

₹12,96,55,000

₹12.97 crore

EMD / bid security

₹12,96,550

Exemption available for eligible bidders

Tender fee

₹10,000

Cost of bid document

Bid validity: 90 days

Security & deductions from the DTCN (5)

EMD required is 1% of the estimated cost, to be transferred online.
Upon acceptance of the tender, the successful tenderer shall deposit an additional sum towards initial security to make 2% of the work cost (together with EMD) and sign the agreement within 10 days.
Failure to deposit additional initial security or sign the contract within the stipulated time will result in forfeiture of EMD and withdrawal of tender acceptance.
Additional Performance Security (APS) will be obtained from the successful bidder if the bid amount is less than the estimated cost put to tender, calculated incrementally based on the 'Rounding Off of Percentage Less (ROPL)' of the accepted bid price.
APS must be submitted in the shape of Term Deposit Receipt or Bank Guarantee within seven days of issue of Letter of Acceptance (LoA), otherwise the bid will be cancelled, and the bidder debarred for 180 days.

Source: Original DTCN

Frequently asked questions

Construction of Block Level Stadium under JHARIGAON Block (With Indoor Hall) in the district of Nabarangpur_building

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

Construction of Block Level Stadium under JHARIGAON Block (With Indoor Hall) in the district of Nabarangpur_building

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more