What is the last date to bid for this tender?

Bids must be submitted on the Odisha eProcurement portal (tendersodisha.gov.in) by 10 Nov 2026, 05:00 PM. Bids are scheduled to open on 11 Nov 2026, 11:00 AM.

What is the estimated value of this tender?

The estimated tender value is ₹42.37 L (₹42,37,270).

How much EMD is required?

The EMD (bid security) is ₹42.4K (₹42,400). The portal lists EMD exemption as available for eligible bidders — check the DTCN for who qualifies.

Who can bid for this tender?

The DTCN states: Bidders must be registered with Odisha State Government or be contractors of equivalent grade/class registered with Central Government/any other State Government/MES/Railways; Bidders must possess an up-to-date compatible Digital Signature Certificate.

What work experience is required?

As extracted from the DTCN: Unless a Civil Engineer Contractor, the successful bidder must deploy at least one experienced Civil Engineer (Diploma or Degree in Civil Engineering with at least two years post-qualification experience) at the work site for the full time.

What is the completion period?

The period of work is 150 days, and bids must remain valid for 120 days.

Which department issued this tender?

This tender was issued by Municipal Bodies, Bhubaneswar Municipal Corporation; the tender inviting authority is the Executive Engineer (Central Tender Cell).

What documents are required to submit a bid?

The DTCN lists 15 documents, including Cost of Bid Document (Online remittance), Earnest Money Deposit (EMD) (Online remittance), Valid Registration Certificate, Valid GST Registration Certificate & GSTIN, PAN Card, No Relationship Certificate (Non-Judicial Stamp Paper), and 9 more.

BuildingLive

Construction of boundary wall and ancillary work for completion of Ward Office in Ward No. 65

BMC AREA, Khordha Municipal BodiesBhubaneswar Municipal Corporation

Tender ID 2026_ORULB_144315_33Ref BMC-EE-Tender Cell-85/2026-27 dt. 23.10.2026

Estimated value: ₹42.37 L
EMD: ₹42.4K; Exemption available
Tender fee: ₹6.0K
Work period: 150 days

Closing in

8 days left

10 Nov 2026, 05:00 PM

About this tender

Municipal Bodies has invited bids for “Construction of boundary wall and ancillary work for completion of Ward Office in Ward No. 65” in BMC AREA, Khordha district, Odisha. The estimated tender value is ₹42.37 lakh and the completion period is 150 days. Bids must be submitted by 10 Nov 2026, 05:00 PM.

Bid readiness

Based on the tender, not your profile

Done: Tender is currently open
Done: BOQ available · 100 items
Done: DTCN analysed · 36 requirements extracted
Done: 15 required documents identified
Needs review: Experience requirement needs review
Needs review: Financial requirements need review

Review requirements

Important dates

All times IST, as published on the portal

Published29 Oct 2026, 10:30 AM
Document downloadUntil 10 Nov 2026
Submission deadline· 8 days left10 Nov 2026, 05:00 PM
Bid opening11 Nov 2026, 11:00 AM

Tender intelligence

Eligibility & bid requirements

DTCN analysed36 requirements extracted15 documents identifiedExtracted from the official tender document

Bhubaneswar Municipal Corporation invites percentage rate bids for 34 civil construction and repair works across various wards in Bhubaneswar. The estimated costs range from Rs. 3.38 Lakhs to Rs. 42.37 Lakhs, with completion periods from 45 to 150 calendar days. Contractors of 'D', 'C', or 'B' class, as specified for each work, are eligible to bid through the e-Procurement portal.

Eligibility

5 items

Bidders must be registered with Odisha State Government or be contractors of equivalent grade/class registered with Central Government/any other State Government/MES/Railways.
Bidders must possess an up-to-date compatible Digital Signature Certificate.
Contractors registered elsewhere but not with the Government of Odisha must register with the appropriate registering authority of the State Government before award of work/signing of the Agreement.

Show 2 more

Bidders must be of 'D', 'C', or 'B' Class as indicated against each specific work.
Bidders who have applied for/are undergoing Corporate Debt Restructuring (CDR)/Strategic Debt Restructuring (SDR), or facing recovery proceedings from Financial Institutions, or declared 'Sick' by BIFR are not eligible.

Source: Original DTCNView source document

Experience

1 item

Unless a Civil Engineer Contractor, the successful bidder must deploy at least one experienced Civil Engineer (Diploma or Degree in Civil Engineering with at least two years post-qualification experience) at the work site for the full time.

Source: Original DTCNView source document

Financial

8 items

SC and ST contractors up to 'B' Class are eligible for Security Deposit (EMD, Initial Security, and Performance Security) at half the usual rate.
Earnest Money Deposit (EMD) is required at 1% of the Estimated Cost for each work, to be furnished online.
Initial Security Deposit (ISD) of not less than 2% of the accepted tender value must be furnished within 7 days of Letter of Acceptance (LoA).

Show 5 more

Additional Performance Security (APS) will be obtained on an incremental basis if the accepted bid price is lower than the Cost Put to Tender, calculated based on the Rounding Off of Percentage Less (ROPL).
The APS amount must be deposited within 7 days from the date of communication.
5% of each bill amount will be withheld towards performance security.
The contractor shall not subcontract/sublet the work; doing so will lead to contract rescission, forfeiture of EMD/ISD, and penalty.
The contract may be rescinded if the contractor fails to rectify defective work, suspends progress without cause, or fails to comply with contract provisions, leading to forfeiture of ISD, SD, APS, and a 20% penalty on the left-over work value.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

11 items

Bidders must be in possession of or under lease/hire agreement for tools, plants, equipment, and machineries as per Schedule-A.
The successful bidder must deploy at least one experienced Civil Engineer at the work site for the full time during the course of lay out and execution of the work.
The deployed Civil Engineer must hold a Diploma or Degree in Civil Engineering from an AICTE recognized institute.

Show 8 more

The deployed Civil Engineer must have at least two years of post-qualification experience in Civil Engineering survey, monitoring and quality control, or construction works with quantity measurements.
The bidder must possess or have lease/hire agreements for the tools, plants, equipment, and machineries listed in Schedule-A.
The contractor shall conduct all required tests on materials as directed by the Engineer-in-Charge, including specific tests for paver blocks, concrete roads, asphalt roads, and sub-base materials.
Quality certificates for paver blocks/kerb stones must be provided by the manufacturer for each consignment.
For concrete roads, slump cone tests, compressive strength tests (7 & 28 days), core cutting tests, and sieve analysis of coarse aggregates for PCC are required.
For Ready Mix Concrete, a test certificate detailing mix proportions, cement type, admixtures, and concrete grade is required.
For asphalt roads, quality and grade of bitumen certificate, bitumen content test, temperature test of mix, and core test for density and thickness are required.
For sub-base, compaction/density test, sieve analysis of coarse aggregate, and CBR or Los Angeles Abrasion Test are required.

Source: Original DTCNView source document

Contract conditions

11 items

The period of completion for works ranges from 45 to 150 Calendar Days.
The last date for online bid submission is 05:00 P.M. of 10.11.2026.
The successful bidder must submit a work program and sign the agreement within 7 days from the date of LoA.

Show 8 more

Bids will remain valid for a period of 120 days from the date of opening.
If the percentage rate quoted is lower than or equal to 15% less (-), the bid shall be rejected.
A compensation for delay in completion of work will be computed at 1.50% per month on a per-day basis, not exceeding 10% of the Tendered Value of work.
The contractor shall bear all Taxes, Duties, Levies, Cess, Entry Tax, Income Tax, Royalties, Fair Weather Charges, and Tollages.
The contractor is responsible for safe custody of materials at work sites.
The contractor must pay fair wages to laborers as prescribed by the State Public Works Department or Minimum Wages Act 1948, whichever is higher.
The contractor shall indemnify BMC against all claims for injuries or damages to any person/property arising from negligence or fault of the contractor.
For legal disputes, the jurisdiction shall be within the State of Odisha.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Bill of quantities

100 priced items · ₹41.94 L (₹41,93,880)

Download BOQ file

Major components

Share of BOQ amount, grouped by item description

Masonry18%₹7.65 L
Concrete & RCC15%₹6.24 L
Doors, windows & steelwork15%₹6.20 L
Plaster, paint & finishing13%₹5.60 L
Flooring & tiling11%₹4.49 L
Plumbing & water supply9%₹3.75 L

Largest items

By amount

Fixing vetrified tiles in floors, treads or steps and landing over 25mm bed of C:M (1:1) jointed with neat ce…Item 11 · 272.67 Sqm₹3.96 L
Labour charges for cutting, bending, binding and tying the grill including the cost of M.S. rod.Item 6 · 33.26 Qntl₹3.18 L
Fly Ash Brick masonry in C.M. (1:6) in super structure having crushing strength not less than 75 Kg / cm2 wit…Item 8 · 56.34 Cum₹3.12 L
PORTICO Earth work in laterite rock or any hard rock other then granite or disintegrated rock removed by chis…Item 1 · 115.19 Cum₹2.83 L
M.S. Grill gate made out of M.S. flat conforming to IS 2062/20006 painted with red oxide primer as pe the des…Item 22 · 2,061.05 Kg₹2.54 L

Tender details

Tender reference: BMC-EE-Tender Cell-85/2026-27 dt. 23.10.2026
Tender ID: 2026_ORULB_144315_33
District: Khordha
Location: BMC AREA
Tender type: Open Tender
Tender category: Works
Period of work: 150 days

Show all 9 fields

Product category: Civil Works - Others
Pincode: 751022

Authority

State
Government of Odisha
Department
Municipal Bodies
Body
Bhubaneswar Municipal Corporation
Inviting authority
Executive Engineer (Central Tender Cell)

All Municipal Bodies tenders in Khordha →

Costs

Estimated value: ₹42,37,270; ₹42.37 lakh
EMD / bid security: ₹42,400; Exemption available for eligible bidders
Tender fee: ₹6,000; Cost of bid document

Bid validity: 120 days

Security & deductions from the DTCN (8)

SC and ST contractors up to 'B' Class are eligible for Security Deposit (EMD, Initial Security, and Performance Security) at half the usual rate.
Earnest Money Deposit (EMD) is required at 1% of the Estimated Cost for each work, to be furnished online.
Initial Security Deposit (ISD) of not less than 2% of the accepted tender value must be furnished within 7 days of Letter of Acceptance (LoA).
Additional Performance Security (APS) will be obtained on an incremental basis if the accepted bid price is lower than the Cost Put to Tender, calculated based on the Rounding Off of Percentage Less (ROPL).
The APS amount must be deposited within 7 days from the date of communication.
5% of each bill amount will be withheld towards performance security.
The contractor shall not subcontract/sublet the work; doing so will lead to contract rescission, forfeiture of EMD/ISD, and penalty.
The contract may be rescinded if the contractor fails to rectify defective work, suspends progress without cause, or fails to comply with contract provisions, leading to forfeiture of ISD, SD, APS, and a 20% penalty on the left-over work value.

Source: Original DTCN

Frequently asked questions

About this tender

Eligibility & bid requirements

DTCN analysed36 requirements extracted15 documents identifiedExtracted from the official tender document

Eligibility

5 items

Bidders must be registered with Odisha State Government or be contractors of equivalent grade/class registered with Central Government/any other State Government/MES/Railways.
Bidders must possess an up-to-date compatible Digital Signature Certificate.
Contractors registered elsewhere but not with the Government of Odisha must register with the appropriate registering authority of the State Government before award of work/signing of the Agreement.

Show 2 more

Bidders must be of 'D', 'C', or 'B' Class as indicated against each specific work.
Bidders who have applied for/are undergoing Corporate Debt Restructuring (CDR)/Strategic Debt Restructuring (SDR), or facing recovery proceedings from Financial Institutions, or declared 'Sick' by BIFR are not eligible.

Source: Original DTCNView source document

Experience

1 item

Unless a Civil Engineer Contractor, the successful bidder must deploy at least one experienced Civil Engineer (Diploma or Degree in Civil Engineering with at least two years post-qualification experience) at the work site for the full time.

Source: Original DTCNView source document

Financial

8 items

SC and ST contractors up to 'B' Class are eligible for Security Deposit (EMD, Initial Security, and Performance Security) at half the usual rate.
Earnest Money Deposit (EMD) is required at 1% of the Estimated Cost for each work, to be furnished online.
Initial Security Deposit (ISD) of not less than 2% of the accepted tender value must be furnished within 7 days of Letter of Acceptance (LoA).

Show 5 more

Additional Performance Security (APS) will be obtained on an incremental basis if the accepted bid price is lower than the Cost Put to Tender, calculated based on the Rounding Off of Percentage Less (ROPL).
The APS amount must be deposited within 7 days from the date of communication.
5% of each bill amount will be withheld towards performance security.
The contractor shall not subcontract/sublet the work; doing so will lead to contract rescission, forfeiture of EMD/ISD, and penalty.
The contract may be rescinded if the contractor fails to rectify defective work, suspends progress without cause, or fails to comply with contract provisions, leading to forfeiture of ISD, SD, APS, and a 20% penalty on the left-over work value.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

11 items

Bidders must be in possession of or under lease/hire agreement for tools, plants, equipment, and machineries as per Schedule-A.
The successful bidder must deploy at least one experienced Civil Engineer at the work site for the full time during the course of lay out and execution of the work.
The deployed Civil Engineer must hold a Diploma or Degree in Civil Engineering from an AICTE recognized institute.

Show 8 more

The deployed Civil Engineer must have at least two years of post-qualification experience in Civil Engineering survey, monitoring and quality control, or construction works with quantity measurements.
The bidder must possess or have lease/hire agreements for the tools, plants, equipment, and machineries listed in Schedule-A.
The contractor shall conduct all required tests on materials as directed by the Engineer-in-Charge, including specific tests for paver blocks, concrete roads, asphalt roads, and sub-base materials.
Quality certificates for paver blocks/kerb stones must be provided by the manufacturer for each consignment.
For concrete roads, slump cone tests, compressive strength tests (7 & 28 days), core cutting tests, and sieve analysis of coarse aggregates for PCC are required.
For Ready Mix Concrete, a test certificate detailing mix proportions, cement type, admixtures, and concrete grade is required.
For asphalt roads, quality and grade of bitumen certificate, bitumen content test, temperature test of mix, and core test for density and thickness are required.
For sub-base, compaction/density test, sieve analysis of coarse aggregate, and CBR or Los Angeles Abrasion Test are required.

Source: Original DTCNView source document

Contract conditions

11 items

The period of completion for works ranges from 45 to 150 Calendar Days.
The last date for online bid submission is 05:00 P.M. of 10.11.2026.
The successful bidder must submit a work program and sign the agreement within 7 days from the date of LoA.

Show 8 more

Bids will remain valid for a period of 120 days from the date of opening.
If the percentage rate quoted is lower than or equal to 15% less (-), the bid shall be rejected.
A compensation for delay in completion of work will be computed at 1.50% per month on a per-day basis, not exceeding 10% of the Tendered Value of work.
The contractor shall bear all Taxes, Duties, Levies, Cess, Entry Tax, Income Tax, Royalties, Fair Weather Charges, and Tollages.
The contractor is responsible for safe custody of materials at work sites.
The contractor must pay fair wages to laborers as prescribed by the State Public Works Department or Minimum Wages Act 1948, whichever is higher.
The contractor shall indemnify BMC against all claims for injuries or damages to any person/property arising from negligence or fault of the contractor.
For legal disputes, the jurisdiction shall be within the State of Odisha.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Costs

Estimated value

₹42,37,270

₹42.37 lakh

EMD / bid security

₹42,400

Exemption available for eligible bidders

Tender fee

₹6,000

Cost of bid document

Bid validity: 120 days

Security & deductions from the DTCN (8)

SC and ST contractors up to 'B' Class are eligible for Security Deposit (EMD, Initial Security, and Performance Security) at half the usual rate.
Earnest Money Deposit (EMD) is required at 1% of the Estimated Cost for each work, to be furnished online.
Initial Security Deposit (ISD) of not less than 2% of the accepted tender value must be furnished within 7 days of Letter of Acceptance (LoA).
Additional Performance Security (APS) will be obtained on an incremental basis if the accepted bid price is lower than the Cost Put to Tender, calculated based on the Rounding Off of Percentage Less (ROPL).
The APS amount must be deposited within 7 days from the date of communication.
5% of each bill amount will be withheld towards performance security.
The contractor shall not subcontract/sublet the work; doing so will lead to contract rescission, forfeiture of EMD/ISD, and penalty.
The contract may be rescinded if the contractor fails to rectify defective work, suspends progress without cause, or fails to comply with contract provisions, leading to forfeiture of ISD, SD, APS, and a 20% penalty on the left-over work value.

Source: Original DTCN

Frequently asked questions

Construction of boundary wall and ancillary work for completion of Ward Office in Ward No. 65

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

Construction of boundary wall and ancillary work for completion of Ward Office in Ward No. 65

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more