What is the last date to bid for this tender?

Bids must be submitted on the Odisha eProcurement portal (tendersodisha.gov.in) by 06 Nov 2026, 05:00 PM. Bids are scheduled to open on 07 Nov 2026, 11:00 AM.

What is the estimated value of this tender?

The estimated tender value is ₹4.20 L (₹4,20,000).

How much EMD is required?

The EMD (bid security) is ₹4.2K (₹4,200). The portal lists EMD exemption as available for eligible bidders — check the DTCN for who qualifies.

Who can bid for this tender?

The DTCN states: Tenderers must upload a valid Registration Certificate of the required class; Tenderers must upload PAN card and up-to-date GSTIN.

What work experience is required?

As extracted from the DTCN: For works above Rs 3.00 Crores, the assessed available bid capacity must be more than the total estimated cost of the works, calculated as (A*N*2-B) where A is max value of Civil Engineering works in any one of last five years (updated at 10% inflation), B is value of existing commitments and ongoing works for next years, and N is number of years for completion of invited works.

What is the completion period?

The period of work is 30 days, and bids must remain valid for 90 days.

Which department issued this tender?

This tender was issued by CE RW I, RWCIRCLE-RAYAGADA, RWDIVISION-RAYAGADA; the tender inviting authority is the Divisional Officer.

What documents are required to submit a bid?

The DTCN lists 14 documents, including Online payment receipt for tender cost, Online payment receipt for EMD, GSTIN, PAN Card, Registration certificate, Affidavit regarding correctness of information/documents, and 8 more.

BuildingLive

Repair to RW Section office building at Kalyanisinghpur for the year 2026 27

Rayagada CE RW IRWDIVISION-RAYAGADA

Tender ID 2026_CERWI_144547_1Ref EERWRGD Online 12 2026 27

Estimated value: ₹4.20 L
EMD: ₹4.2K; Exemption available
Tender fee: ₹2.0K
Work period: 30 days

Closing in

3 days left

06 Nov 2026, 05:00 PM

About this tender

CE RW I has invited bids for “Repair to RW Section office building at Kalyanisinghpur for the year 2026 27” in Rayagada district, Odisha. The estimated tender value is ₹4.20 lakh and the completion period is 30 days. Bids must be submitted by 06 Nov 2026, 05:00 PM.

Bid readiness

Based on the tender, not your profile

Done: Tender is currently open
Done: BOQ available · 14 items
Done: DTCN analysed · 62 requirements extracted
Done: 14 required documents identified
Needs review: Experience requirement needs review
Needs review: Financial requirements need review

Review requirements

Important dates

All times IST, as published on the portal

Published29 Oct 2026, 11:00 AM
Document downloadUntil 06 Nov 2026
Submission deadline· 3 days left06 Nov 2026, 05:00 PM
Bid opening07 Nov 2026, 11:00 AM

Tender intelligence

Eligibility & bid requirements

DTCN analysed62 requirements extracted14 documents identifiedExtracted from the official tender document

This tender, Online Tender-12/2026-27, issued by the Rural Works Organisation, Rural Works Division, Rayagada, is for building works. Contractors must submit bids online and adhere to specific eligibility criteria, including valid registration and financial requirements. A key condition is the online transfer of tender cost and EMD, with additional performance security required for bids significantly below the estimated cost.

Eligibility

6 items

Tenderers must upload a valid Registration Certificate of the required class.
Tenderers must upload PAN card and up-to-date GSTIN.
A bidder shall not be a relative of an employee working under RWD-II Ganjam not below the rank of AE.

Show 3 more

Joint Venture/Consortium agreements/M.O.Us are not allowed.
Bidders from outside the state can participate without GSTIN clearance certificate if they submit an affidavit stating they are not registered under the GSTIN Act and have no liability, but must produce a GSTIN clearance certificate before contract award.
Bidders registered under other State Governments/MES/Railways/CPWD may participate, but successful bidders must register under the state PWD before signing the agreement.

Source: Original DTCNView source document

Experience

1 item

For works above Rs 3.00 Crores, the assessed available bid capacity must be more than the total estimated cost of the works, calculated as (A*N*2-B) where A is max value of Civil Engineering works in any one of last five years (updated at 10% inflation), B is value of existing commitments and ongoing works for next years, and N is number of years for completion of invited works.

Source: Original DTCNView source document

Financial

12 items

Payment towards tender cost and EMD must be transferred online as per Works Department Office Memorandum No. 6785 dt. 09.05.2017.
EMD amount is 1% of the estimated amount.
To avail EMD exemption, intending Engineering Contractors must declare they have not availed such exemption for more than two works during the current financial year.

Show 9 more

Upon acceptance of the tender, the successful tenderer shall deposit an initial security sum within 10 days to make 2% of the work cost (together with EMD) and sign the agreement in PWD form-2.
Failure to deposit initial security or sign the contract within the stipulated time will lead to forfeiture of EMD and withdrawal of tender acceptance.
Additional Performance Security is required if the bid amount is less than the estimated cost: 0.2% increment for 10-20% below, 0.3% increment for 20-30% below, and 0.5% increment for 30% or more below.
The initial security deposit should be in shape of pledged NSC/POTD/POSB/KVP/Deposit receipt of Scheduled Bank.
Security deposit by way of deduction from bills will be 5% of gross amount for B class & above contractors, and 3% for C & D class contractors.
The EMD will be credited to all tenderers after the tender is awarded to the successful tenderer and will not carry any interest.
Security deposit of the contractor shall be refunded only 12 calendar months after the date of completion of the work, provided the final bill has been paid and defects rectified.
In case of tender by partners, any change in the constitution of the firm must be notified within fifteen days, failing which the contract may be rescinded and security deposit forfeited.
GST will be deducted/added as per applicable law from time to time.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

27 items

Special class contractors must employ one Graduate Engineer and two Diploma Holders belonging to the state of Odisha.
A class contractors must employ one Graduate Engineer or two Diploma Holders belonging to the state of Odisha.
For works costing Rs.2.5 Lakhs or more, the contractor shall employ one or more Engineering Graduates or Diploma Engineers as apprentices.

Show 24 more

The Civil Contractor must upload a scan copy of a notarized agreement executed with a registered Electrical Contractor, including their valid license, GSTIN & PAN.
The work must be completed within the stipulated period as mentioned in the NIT, commencing from the date of issue of work order.
Tenderer is required to submit a detailed program of work before drawing the agreement.
The plan specification for the work can be seen at the office of Superintending Engineer/Executive Engineer during working hours.
The specification and instruction given in the approved plans should be followed strictly during execution of work.
Cement to be used shall be Ordinary Portland cement (IS: 269), High strength ordinary Portland cement (IS. 8112), or Portland Slag Cement (IS: 445).
Reinforcement/un-tensioned steel shall conform to IS:432 (Part-1) for Fe 250, IS:1139 HYSD for Fe 415, or IS: 1786 HYSD for Fe 500.
Contractor must arrange cement (IDCOL, OCL L&T & SAIL, TISCO) and steel from approved manufacturers, get it tested in the departmental laboratory, and approved before use.
Contractor must produce original bills from manufacturers for cement and steel purchases.
All required machinery for the work must be arranged at site by the contractor at their own cost.
All reinforced cement concrete work should conform to Odisha Detailed Standard Specification and should be of M. 150 and M. 200 equivalent to nominal proportion (1:2:4) (1:1/2:3) having minimum compressive strength of 150Kg. Cm2/ 200Kg. CmSq. in 15 Cm. Cubes at 28 days.
Shuttering and centering shall be with seasoned Sal wood planks lined with suitable setting and made leak proof and water tight, or alternatively steel shuttering and centering may be used.
After work completion, all surplus materials and debris are to be removed, preliminary work dismantled, and the ground up to 30M (100ft) wide from the building cleaned and dressed.
Cement concrete in roof slab, beams etc., whenever prescribed, shall be machine mixed and vibrated, with the contractor arranging own concrete mixers, vibrators, pumps etc.
Contractors must abide by the C.P.W.D safety code rules.
Contractors must arrange at their own cost necessary tools and plants, machineries, concrete mixer, vibrator, and other machineries such as pumps for efficient execution.
Contractors must submit monthly returns of Highly Skilled, Skilled, Semi-Skilled, and Unskilled Labour.
Contractors must inspect the site of proposed work and quarries to satisfy themselves about quality and availability of materials, medical aids, labour, and foodstuffs.
Samples of stones, metals, chips, etc., and other materials to be used must be deposited in sealed bags, duly labeled, for approval.
All fittings for doors and windows, if supplied by the contractor, should be of best quality and approved by the Executive Engineer before use.
The contractor shall arrange at his own cost all requisite equipment for testing Building if found necessary and bear the entire cost of such test.
All reinforced cement concrete works, lintels, column beam, chajja, Roof slab and other such works should be finished smooth and no extra charges for plastering will be paid.
The names of engineering personnel appointed by the contractor should be intimated to the tender receiving authority along with the tender.
Each bill of the special class or 'A' class contractor shall be accompanied by an employment role of the engineering personnel and a certificate from the Graduate Engineer or Diploma holder that the work has been supervised by them.

Source: Original DTCNView source document

Contract conditions

16 items

The acceptance of the tender and award of the contract will rest with the Chief Engineer, (Buildings & Bridges), Rural Works, Bhubaneswar, who reserves the right to reject any or all tenders without assigning reasons.
All rates and prices in the tender shall cover Cess, ferry, tollages charges, Royalties, other charges but without GST.
The work will have to be completed within the stipulated period as mentioned in the NIT.

Show 13 more

The entire amount of compensation for delay shall not exceed 10 percent on the estimated cost of the work.
The contractor is liable for damage done and for imperfections for 24 months after the final certificate of completion.
The contract shall not be assigned or sublet without the written approval of the Executive Engineer.
All sums payable by way of compensation shall be considered as reasonable compensation to be applied to the use of Government without reference to the actual loss or damaged sustained.
The contract should be deemed to have been entered into within the State of Odisha, and neither party can bring a suit outside the state of Odisha.
The date of issue of the notice to the contractor to attend Division office for signing the agreement shall be treated as the date of commencement of work.
Contractors are required to pay royalties of all materials as per State Govt. rates and produce receipts.
Testing charges, including expenditure for collection/transportation of samples/specimen, will be borne by the contractor.
The contractor shall pay to the Engineering personnel monthly emoluments not less than those of equivalent qualification employed under the State Govt. of Odisha.
The total expenditure for apprentices should not exceed 1% of the Tendered cost of the work.
The contractor will not claim anything if the work is curtailed or stopped at any stage.
Tenders will remain valid for a period of ninety days from the date of receipt of tenders.
Recoveries will be made based on EMF, DMF, and Additional Cost as applicable from the bills of the contractor as per letter No.223 dated 23.03.2023 of the Collector, Rayagada.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Bill of quantities

14 priced items · ₹4.20 L (₹4,19,937)

Download BOQ file

Major components

Share of BOQ amount, grouped by item description

Plaster, paint & finishing46%₹1.92 L
Masonry17%₹71.5K
Flooring & tiling14%₹59.2K
Doors, windows & steelwork9%₹38.7K
Concrete & RCC8%₹35.4K
Earthwork & excavation4%₹14.9K

Largest items

By amount

Distempering two coats with approved shade, over a coat of priming with cost, conveyance, taxes of all the ma…Item 9 · 604.67 sqm₹1.07 L
16mm thick cement plaster in C.M. (1:6)finished smooth to inside surface of 9" thick brick wall after racking…Item 6 · 254.91 sqm₹71.5K
Supplying,fitting & fixing vetrified tile in floors of size 600mm x 600mm of approved make conforming to IS:1…Item 13 · 46.33 sqm₹56.3K
Supplying, fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of appro…Item 10 · 7.81 sqm₹38.7K
Providing cement concrete of proportion (1:3:6) in foundation and floors using 4cm size clean hard black hand…Item 5 · 5.78 cum₹35.4K

Tender details

Tender reference: EERWRGD Online 12 2026 27
Tender ID: 2026_CERWI_144547_1
District: Rayagada
Location: Rayagada
Tender type: Open Tender
Tender category: Works
Period of work: 30 days

Show all 9 fields

Product category: Civil Works - Buildings
Pincode: 765001

Authority

State
Government of Odisha
Department
CE RW I
Organisation
RWCIRCLE-RAYAGADA
Office
RWDIVISION-RAYAGADA
Inviting authority
Divisional Officer

All CE RW I tenders in Rayagada →

Costs

Estimated value: ₹4,20,000; ₹4.20 lakh
EMD / bid security: ₹4,200; Exemption available for eligible bidders
Tender fee: ₹2,000; Cost of bid document

Bid validity: 90 days

Security & deductions from the DTCN (12)

Payment towards tender cost and EMD must be transferred online as per Works Department Office Memorandum No. 6785 dt. 09.05.2017.
EMD amount is 1% of the estimated amount.
To avail EMD exemption, intending Engineering Contractors must declare they have not availed such exemption for more than two works during the current financial year.
Upon acceptance of the tender, the successful tenderer shall deposit an initial security sum within 10 days to make 2% of the work cost (together with EMD) and sign the agreement in PWD form-2.
Failure to deposit initial security or sign the contract within the stipulated time will lead to forfeiture of EMD and withdrawal of tender acceptance.
Additional Performance Security is required if the bid amount is less than the estimated cost: 0.2% increment for 10-20% below, 0.3% increment for 20-30% below, and 0.5% increment for 30% or more below.
The initial security deposit should be in shape of pledged NSC/POTD/POSB/KVP/Deposit receipt of Scheduled Bank.
Security deposit by way of deduction from bills will be 5% of gross amount for B class & above contractors, and 3% for C & D class contractors.
The EMD will be credited to all tenderers after the tender is awarded to the successful tenderer and will not carry any interest.
Security deposit of the contractor shall be refunded only 12 calendar months after the date of completion of the work, provided the final bill has been paid and defects rectified.
In case of tender by partners, any change in the constitution of the firm must be notified within fifteen days, failing which the contract may be rescinded and security deposit forfeited.
GST will be deducted/added as per applicable law from time to time.

Source: Original DTCN

Frequently asked questions

Eligibility & bid requirements

DTCN analysed62 requirements extracted14 documents identifiedExtracted from the official tender document

Eligibility

6 items

Tenderers must upload a valid Registration Certificate of the required class.
Tenderers must upload PAN card and up-to-date GSTIN.
A bidder shall not be a relative of an employee working under RWD-II Ganjam not below the rank of AE.

Show 3 more

Joint Venture/Consortium agreements/M.O.Us are not allowed.
Bidders from outside the state can participate without GSTIN clearance certificate if they submit an affidavit stating they are not registered under the GSTIN Act and have no liability, but must produce a GSTIN clearance certificate before contract award.
Bidders registered under other State Governments/MES/Railways/CPWD may participate, but successful bidders must register under the state PWD before signing the agreement.

Source: Original DTCNView source document

Experience

1 item

For works above Rs 3.00 Crores, the assessed available bid capacity must be more than the total estimated cost of the works, calculated as (A*N*2-B) where A is max value of Civil Engineering works in any one of last five years (updated at 10% inflation), B is value of existing commitments and ongoing works for next years, and N is number of years for completion of invited works.

Source: Original DTCNView source document

Financial

12 items

Payment towards tender cost and EMD must be transferred online as per Works Department Office Memorandum No. 6785 dt. 09.05.2017.
EMD amount is 1% of the estimated amount.
To avail EMD exemption, intending Engineering Contractors must declare they have not availed such exemption for more than two works during the current financial year.

Show 9 more

Upon acceptance of the tender, the successful tenderer shall deposit an initial security sum within 10 days to make 2% of the work cost (together with EMD) and sign the agreement in PWD form-2.
Failure to deposit initial security or sign the contract within the stipulated time will lead to forfeiture of EMD and withdrawal of tender acceptance.
Additional Performance Security is required if the bid amount is less than the estimated cost: 0.2% increment for 10-20% below, 0.3% increment for 20-30% below, and 0.5% increment for 30% or more below.
The initial security deposit should be in shape of pledged NSC/POTD/POSB/KVP/Deposit receipt of Scheduled Bank.
Security deposit by way of deduction from bills will be 5% of gross amount for B class & above contractors, and 3% for C & D class contractors.
The EMD will be credited to all tenderers after the tender is awarded to the successful tenderer and will not carry any interest.
Security deposit of the contractor shall be refunded only 12 calendar months after the date of completion of the work, provided the final bill has been paid and defects rectified.
In case of tender by partners, any change in the constitution of the firm must be notified within fifteen days, failing which the contract may be rescinded and security deposit forfeited.
GST will be deducted/added as per applicable law from time to time.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

27 items

Special class contractors must employ one Graduate Engineer and two Diploma Holders belonging to the state of Odisha.
A class contractors must employ one Graduate Engineer or two Diploma Holders belonging to the state of Odisha.
For works costing Rs.2.5 Lakhs or more, the contractor shall employ one or more Engineering Graduates or Diploma Engineers as apprentices.

Show 24 more

The Civil Contractor must upload a scan copy of a notarized agreement executed with a registered Electrical Contractor, including their valid license, GSTIN & PAN.
The work must be completed within the stipulated period as mentioned in the NIT, commencing from the date of issue of work order.
Tenderer is required to submit a detailed program of work before drawing the agreement.
The plan specification for the work can be seen at the office of Superintending Engineer/Executive Engineer during working hours.
The specification and instruction given in the approved plans should be followed strictly during execution of work.
Cement to be used shall be Ordinary Portland cement (IS: 269), High strength ordinary Portland cement (IS. 8112), or Portland Slag Cement (IS: 445).
Reinforcement/un-tensioned steel shall conform to IS:432 (Part-1) for Fe 250, IS:1139 HYSD for Fe 415, or IS: 1786 HYSD for Fe 500.
Contractor must arrange cement (IDCOL, OCL L&T & SAIL, TISCO) and steel from approved manufacturers, get it tested in the departmental laboratory, and approved before use.
Contractor must produce original bills from manufacturers for cement and steel purchases.
All required machinery for the work must be arranged at site by the contractor at their own cost.
All reinforced cement concrete work should conform to Odisha Detailed Standard Specification and should be of M. 150 and M. 200 equivalent to nominal proportion (1:2:4) (1:1/2:3) having minimum compressive strength of 150Kg. Cm2/ 200Kg. CmSq. in 15 Cm. Cubes at 28 days.
Shuttering and centering shall be with seasoned Sal wood planks lined with suitable setting and made leak proof and water tight, or alternatively steel shuttering and centering may be used.
After work completion, all surplus materials and debris are to be removed, preliminary work dismantled, and the ground up to 30M (100ft) wide from the building cleaned and dressed.
Cement concrete in roof slab, beams etc., whenever prescribed, shall be machine mixed and vibrated, with the contractor arranging own concrete mixers, vibrators, pumps etc.
Contractors must abide by the C.P.W.D safety code rules.
Contractors must arrange at their own cost necessary tools and plants, machineries, concrete mixer, vibrator, and other machineries such as pumps for efficient execution.
Contractors must submit monthly returns of Highly Skilled, Skilled, Semi-Skilled, and Unskilled Labour.
Contractors must inspect the site of proposed work and quarries to satisfy themselves about quality and availability of materials, medical aids, labour, and foodstuffs.
Samples of stones, metals, chips, etc., and other materials to be used must be deposited in sealed bags, duly labeled, for approval.
All fittings for doors and windows, if supplied by the contractor, should be of best quality and approved by the Executive Engineer before use.
The contractor shall arrange at his own cost all requisite equipment for testing Building if found necessary and bear the entire cost of such test.
All reinforced cement concrete works, lintels, column beam, chajja, Roof slab and other such works should be finished smooth and no extra charges for plastering will be paid.
The names of engineering personnel appointed by the contractor should be intimated to the tender receiving authority along with the tender.
Each bill of the special class or 'A' class contractor shall be accompanied by an employment role of the engineering personnel and a certificate from the Graduate Engineer or Diploma holder that the work has been supervised by them.

Source: Original DTCNView source document

Contract conditions

16 items

The acceptance of the tender and award of the contract will rest with the Chief Engineer, (Buildings & Bridges), Rural Works, Bhubaneswar, who reserves the right to reject any or all tenders without assigning reasons.
All rates and prices in the tender shall cover Cess, ferry, tollages charges, Royalties, other charges but without GST.
The work will have to be completed within the stipulated period as mentioned in the NIT.

Show 13 more

The entire amount of compensation for delay shall not exceed 10 percent on the estimated cost of the work.
The contractor is liable for damage done and for imperfections for 24 months after the final certificate of completion.
The contract shall not be assigned or sublet without the written approval of the Executive Engineer.
All sums payable by way of compensation shall be considered as reasonable compensation to be applied to the use of Government without reference to the actual loss or damaged sustained.
The contract should be deemed to have been entered into within the State of Odisha, and neither party can bring a suit outside the state of Odisha.
The date of issue of the notice to the contractor to attend Division office for signing the agreement shall be treated as the date of commencement of work.
Contractors are required to pay royalties of all materials as per State Govt. rates and produce receipts.
Testing charges, including expenditure for collection/transportation of samples/specimen, will be borne by the contractor.
The contractor shall pay to the Engineering personnel monthly emoluments not less than those of equivalent qualification employed under the State Govt. of Odisha.
The total expenditure for apprentices should not exceed 1% of the Tendered cost of the work.
The contractor will not claim anything if the work is curtailed or stopped at any stage.
Tenders will remain valid for a period of ninety days from the date of receipt of tenders.
Recoveries will be made based on EMF, DMF, and Additional Cost as applicable from the bills of the contractor as per letter No.223 dated 23.03.2023 of the Collector, Rayagada.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Costs

Estimated value

₹4,20,000

₹4.20 lakh

EMD / bid security

₹4,200

Exemption available for eligible bidders

Tender fee

₹2,000

Cost of bid document

Bid validity: 90 days

Security & deductions from the DTCN (12)

Payment towards tender cost and EMD must be transferred online as per Works Department Office Memorandum No. 6785 dt. 09.05.2017.
EMD amount is 1% of the estimated amount.
To avail EMD exemption, intending Engineering Contractors must declare they have not availed such exemption for more than two works during the current financial year.
Upon acceptance of the tender, the successful tenderer shall deposit an initial security sum within 10 days to make 2% of the work cost (together with EMD) and sign the agreement in PWD form-2.
Failure to deposit initial security or sign the contract within the stipulated time will lead to forfeiture of EMD and withdrawal of tender acceptance.
Additional Performance Security is required if the bid amount is less than the estimated cost: 0.2% increment for 10-20% below, 0.3% increment for 20-30% below, and 0.5% increment for 30% or more below.
The initial security deposit should be in shape of pledged NSC/POTD/POSB/KVP/Deposit receipt of Scheduled Bank.
Security deposit by way of deduction from bills will be 5% of gross amount for B class & above contractors, and 3% for C & D class contractors.
The EMD will be credited to all tenderers after the tender is awarded to the successful tenderer and will not carry any interest.
Security deposit of the contractor shall be refunded only 12 calendar months after the date of completion of the work, provided the final bill has been paid and defects rectified.
In case of tender by partners, any change in the constitution of the firm must be notified within fifteen days, failing which the contract may be rescinded and security deposit forfeited.
GST will be deducted/added as per applicable law from time to time.

Source: Original DTCN

Frequently asked questions

Repair to RW Section office building at Kalyanisinghpur for the year 2026 27

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

Repair to RW Section office building at Kalyanisinghpur for the year 2026 27

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more