What is the last date to bid for this tender?

Bids must be submitted on the Odisha eProcurement portal (tendersodisha.gov.in) by 30 Oct 2026, 05:00 PM. Bids are scheduled to open on 31 Oct 2026, 11:00 AM.

What is the estimated value of this tender?

The estimated tender value is ₹12.65 L (₹12,64,700).

How much EMD is required?

The EMD (bid security) is ₹12.7K (₹12,700). The portal lists EMD exemption as available for eligible bidders — check the DTCN for who qualifies.

Who can bid for this tender?

The DTCN states: Contractors must be registered with the Odisha State Government or equivalent grade/class with Central Government/any other State Government/MES/Railways; Bidders must possess an up-to-date compatible Digital Signature Certificate.

What work experience is required?

As extracted from the DTCN: Each intending bidder (unless a Civil Engineer Contractor) must deploy at least one experienced Civil Engineer at the work site for the full time during layout and execution; The Civil Engineer must have at least two years of post-qualification experience in Civil Engineering survey, monitoring and quality control, or construction works with quantity measurements, or a combination.

What is the completion period?

The period of work is 75 days, and bids must remain valid for 120 days.

Which department issued this tender?

This tender was issued by Municipal Bodies, Bhubaneswar Municipal Corporation; the tender inviting authority is the Executive Engineer (Central Tender Cell).

What documents are required to submit a bid?

The DTCN lists 17 documents, including Valid Contractor's Registration Certificate (License), EPF Registration, GSTIN, PAN Card, Earnest Money Deposit (EMD), Cost of Tender Documents, and 11 more.

RoadClosed

Repair of road at Radha Krushna Basti-A, B Harijan Sahi, Sadak Sahi, Durga Mandap Basti, PWD and Pichu Padia Basti at Unit-6 and 7 in Ward No. 46

BMC AREA, Khordha Municipal BodiesBhubaneswar Municipal Corporation

Tender ID 2026_ORULB_143600_13Ref BMC-EE-Tender Cell-82/2026-27 dt. 13.10.2026

Estimated value: ₹12.65 L
EMD: ₹12.7K; Exemption available
Tender fee: ₹6.0K
Work period: 75 days

Bid submission

Closed

Closed on 30 Oct 2026, 05:00 PM

Bid submission for this tender has closed. Browse closed tenders in the archive →

About this tender

Municipal Bodies has invited bids for “Repair of road at Radha Krushna Basti-A, B Harijan Sahi, Sadak Sahi, Durga Mandap Basti, PWD and Pichu Padia Basti at Unit-6 and 7 in Ward No. 46” in BMC AREA, Khordha district, Odisha. The estimated tender value is ₹12.65 lakh and the completion period is 75 days. Bids must be submitted by 30 Oct 2026, 05:00 PM.

Bid readiness

Based on the tender, not your profile

Not available: Bid submission has closed
Done: BOQ available · 8 items
Done: DTCN analysed · 48 requirements extracted
Done: 17 required documents identified
Needs review: Experience requirement needs review
Needs review: Financial requirements need review

Review requirements

Important dates

All times IST, as published on the portal

Published17 Oct 2026, 10:30 AM
Document downloadUntil 30 Oct 2026
Submission deadline30 Oct 2026, 05:00 PM
Bid opening31 Oct 2026, 11:00 AM

Tender intelligence

Eligibility & bid requirements

DTCN analysed48 requirements extracted17 documents identifiedExtracted from the official tender document

Bhubaneswar Municipal Corporation invites percentage rate bids for 28 civil construction/repair works, with estimated costs ranging from Rs. 8.47 Lakhs to Rs. 46.60 Lakhs. The works have completion periods between 60 and 180 calendar days. Bidders must be registered contractors with the Odisha State Government or equivalent, and meet specific class requirements for each work.

Eligibility

5 items

Contractors must be registered with the Odisha State Government or equivalent grade/class with Central Government/any other State Government/MES/Railways.
Bidders must possess an up-to-date compatible Digital Signature Certificate.
Contractors registered elsewhere must register with the appropriate registering authority of the State Government before award of work/signing of the Agreement.

Show 2 more

Bidders must not be undergoing Corporate Debt Restructuring (CDR)/Strategic Debt Restructuring (SDR), facing recovery proceedings from Financial Institutions, or declared 'Sick' by BIFR.
The class of contractor ('D'/'C'/'B' Class) is specified against each work in the DTCN.

Source: Original DTCNView source document

Experience

2 items

Each intending bidder (unless a Civil Engineer Contractor) must deploy at least one experienced Civil Engineer at the work site for the full time during layout and execution.
The Civil Engineer must have at least two years of post-qualification experience in Civil Engineering survey, monitoring and quality control, or construction works with quantity measurements, or a combination.

Source: Original DTCNView source document

Financial

8 items

SC/ST contractors up to 'B' Class are eligible for 50% reduction in security deposit (EMD, Initial Security, Performance Security) and 10% price preference.
Earnest Money Deposit (EMD) is 1% of the Estimated Cost for each work and must be remitted online.
Initial Security Deposit (ISD) of not less than 2% of the accepted tender value must be furnished within 7 days of Letter of Acceptance (LoA).

Show 5 more

Additional Performance Security (APS) is required if the accepted bid price is lower than the Cost Put to Tender, calculated incrementally based on the percentage difference.
The APS must be deposited within 7 days from the date of communication.
5% of each bill amount will be withheld towards performance security, which along with EMD and ISD, forms the Security Deposit.
The contractor shall not subcontract/sublet the work; doing so will result in rescission of contract, forfeiture of EMD/ISD, and penalties.
BMC reserves the right to rescind the contract for various defaults, including defective work, suspension of progress, or failure to comply with DTCN, leading to forfeiture of ISD/SD/APS and a 20% penalty on the leftover work value.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

15 items

The Civil Engineer must have a Diploma or Degree in Civil Engineering from an AICTE recognized institute.
Bidders must be in possession of or have a lease/hire agreement for tools, plants, equipment, and machinery as per Schedule-A.
Deployment of at least one experienced Civil Engineer at the work site for the full time during layout and execution, with specific qualification and experience requirements.

Show 12 more

Possession or lease/hire agreement for tools, plants, equipment, and machinery as per Schedule-A.
Quality certificates for paver blocks/kerb stones/blocks from the manufacturer for each consignment.
For concrete roads, slump cone test, compressive strength test (7 & 28 days), core cutting test, and sieve analysis of coarse aggregates (for PCC) are required.
For Ready Mix Concrete, a test certificate featuring mix proportions, cement type, admixture details, and concrete grade is required for each project.
For asphalt roads, quality and grade of bitumen certificate, bitumen content test, temperature test of bitumen mixed aggregate, and core test for density and thickness are required.
For sub-base, compaction/density test, sieve analysis of coarse aggregate, and CBR or Los Angeles Abrasion Test are required.
All required tests on materials must be conducted as directed by the Engineer-in-Charge, adhering to IRC/MoSRT&H/ISI specifications.
The contractor must provide all materials required for the work, conforming to relevant latest editions of BIS specifications and Codes of Practices.
The contractor must provide suitable scaffolding, working platforms, gangways, and stairways for safe work.
Adequate precautions must be taken against electrical equipment and fire.
Personal safety equipment must be adequately available and maintained for all employed persons.
The contractor must engage qualified and experienced Resident Engineer(s) and Assistant(s) to the satisfaction of BMC.

Source: Original DTCNView source document

Contract conditions

18 items

The period of completion for works ranges from 60 to 180 calendar days.
Bids must be submitted online through www.tendersodisha.gov.in by 05:00 P.M. of October 30, 2026.
Technical and Financial Bids will be opened on October 31, 2026, from 11:00 A.M. onwards.

Show 15 more

If the accepted bid price is abnormally low (ROPL below -10%), the bidder may be debarred from participating in BMC tenders for one year.
The successful bidder must submit a work program and sign the agreement within 7 days of the LoA.
If the L1 bidder fails to sign the agreement, they will be debarred for at least three years, and the L2 bidder may be called if they match L1's rate and conditions.
The bid validity period is 120 days from the date of opening.
If the percentage rate quoted is lower than or equal to 15% less, the bid will be rejected, unless multiple bids are at 14.99% less, in which case a lottery system will be used.
A penalty for delay in execution will be computed at 1.50% per month on a per-day basis, not exceeding 10% of the Tendered Value of work.
The contractor shall bear all Taxes, Duties, Levies, Cess, Entry Tax, Income Tax, Royalties, Fair Weather Charges, and Tollages.
The contractor is responsible for safe custody of materials at work sites.
Contractors may be blacklisted for misbehavior, tender fixing, non-achievement of milestones, violation of contract conditions, jeopardizing state security, or submitting false documents.
The jurisdiction for legal disputes is within the State of Odisha.
Extension of time may be granted for unavoidable circumstances not attributable to the contractor, without monetary compensation or price escalation.
Deviation of quantity exceeding 10% of the contract value requires prior approval from the competent authority.
Bills must be submitted monthly, and measurements will be verified within 10 days.
All intermediate payments are advances against the final payment; defective work found later must be rectified by the contractor without additional payment.
The final bill must be submitted within two months of completion, and the contractor must sign the MB and Bill Form with a 'No Claim Certificate'.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Bill of quantities

8 priced items · ₹12.65 L (₹12,64,700)

Download BOQ file

Major components

Share of BOQ amount, grouped by item description

Concrete & RCC46%₹5.83 L
Earthwork & excavation5%₹62.0K
Other items49%₹6.19 L

Largest items

By amount

C:C: (1:4:8) using 4 cm. size H.G. metal (C.B) including the cost of all materials, labour etc complete.Item 4 · 105.24 cum₹6.16 L
Labour charge for Laying Factory made Chamfered edge Cement Concrete Paver Bliocks of required strength, thic…Item 5 · 947.16 sqm₹1.77 L
C.C. work of M20 grade with 20 mm down grade chips (C.B.) including Hoisting & layingItem 7 · 26.3 cum₹1.63 L
Dismantlling and removing cement concrete including stacking the useful materials for re-use and removing the…Item 2 · 105.24 cum₹92.3K
Labour for Removal of Cement Concrete Paver Blocks of different thickness & size/shape made by manualy over 5…Item 1 · 1,052.4 Sqm₹86.5K

Tender details

Tender reference: BMC-EE-Tender Cell-82/2026-27 dt. 13.10.2026
Tender ID: 2026_ORULB_143600_13
District: Khordha
Location: BMC AREA
Tender type: Open Tender
Tender category: Works
Period of work: 75 days

Show all 9 fields

Product category: Civil Works - Others
Pincode: 751022

Authority

State
Government of Odisha
Department
Municipal Bodies
Body
Bhubaneswar Municipal Corporation
Inviting authority
Executive Engineer (Central Tender Cell)

All Municipal Bodies tenders in Khordha →

Costs

Estimated value: ₹12,64,700; ₹12.65 lakh
EMD / bid security: ₹12,700; Exemption available for eligible bidders
Tender fee: ₹6,000; Cost of bid document

Bid validity: 120 days

Security & deductions from the DTCN (8)

SC/ST contractors up to 'B' Class are eligible for 50% reduction in security deposit (EMD, Initial Security, Performance Security) and 10% price preference.
Earnest Money Deposit (EMD) is 1% of the Estimated Cost for each work and must be remitted online.
Initial Security Deposit (ISD) of not less than 2% of the accepted tender value must be furnished within 7 days of Letter of Acceptance (LoA).
Additional Performance Security (APS) is required if the accepted bid price is lower than the Cost Put to Tender, calculated incrementally based on the percentage difference.
The APS must be deposited within 7 days from the date of communication.
5% of each bill amount will be withheld towards performance security, which along with EMD and ISD, forms the Security Deposit.
The contractor shall not subcontract/sublet the work; doing so will result in rescission of contract, forfeiture of EMD/ISD, and penalties.
BMC reserves the right to rescind the contract for various defaults, including defective work, suspension of progress, or failure to comply with DTCN, leading to forfeiture of ISD/SD/APS and a 20% penalty on the leftover work value.

Source: Original DTCN

Frequently asked questions

About this tender

Eligibility & bid requirements

DTCN analysed48 requirements extracted17 documents identifiedExtracted from the official tender document

Eligibility

5 items

Contractors must be registered with the Odisha State Government or equivalent grade/class with Central Government/any other State Government/MES/Railways.
Bidders must possess an up-to-date compatible Digital Signature Certificate.
Contractors registered elsewhere must register with the appropriate registering authority of the State Government before award of work/signing of the Agreement.

Show 2 more

Bidders must not be undergoing Corporate Debt Restructuring (CDR)/Strategic Debt Restructuring (SDR), facing recovery proceedings from Financial Institutions, or declared 'Sick' by BIFR.
The class of contractor ('D'/'C'/'B' Class) is specified against each work in the DTCN.

Source: Original DTCNView source document

Experience

2 items

Each intending bidder (unless a Civil Engineer Contractor) must deploy at least one experienced Civil Engineer at the work site for the full time during layout and execution.
The Civil Engineer must have at least two years of post-qualification experience in Civil Engineering survey, monitoring and quality control, or construction works with quantity measurements, or a combination.

Source: Original DTCNView source document

Financial

8 items

SC/ST contractors up to 'B' Class are eligible for 50% reduction in security deposit (EMD, Initial Security, Performance Security) and 10% price preference.
Earnest Money Deposit (EMD) is 1% of the Estimated Cost for each work and must be remitted online.
Initial Security Deposit (ISD) of not less than 2% of the accepted tender value must be furnished within 7 days of Letter of Acceptance (LoA).

Show 5 more

Additional Performance Security (APS) is required if the accepted bid price is lower than the Cost Put to Tender, calculated incrementally based on the percentage difference.
The APS must be deposited within 7 days from the date of communication.
5% of each bill amount will be withheld towards performance security, which along with EMD and ISD, forms the Security Deposit.
The contractor shall not subcontract/sublet the work; doing so will result in rescission of contract, forfeiture of EMD/ISD, and penalties.
BMC reserves the right to rescind the contract for various defaults, including defective work, suspension of progress, or failure to comply with DTCN, leading to forfeiture of ISD/SD/APS and a 20% penalty on the leftover work value.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

15 items

The Civil Engineer must have a Diploma or Degree in Civil Engineering from an AICTE recognized institute.
Bidders must be in possession of or have a lease/hire agreement for tools, plants, equipment, and machinery as per Schedule-A.
Deployment of at least one experienced Civil Engineer at the work site for the full time during layout and execution, with specific qualification and experience requirements.

Show 12 more

Possession or lease/hire agreement for tools, plants, equipment, and machinery as per Schedule-A.
Quality certificates for paver blocks/kerb stones/blocks from the manufacturer for each consignment.
For concrete roads, slump cone test, compressive strength test (7 & 28 days), core cutting test, and sieve analysis of coarse aggregates (for PCC) are required.
For Ready Mix Concrete, a test certificate featuring mix proportions, cement type, admixture details, and concrete grade is required for each project.
For asphalt roads, quality and grade of bitumen certificate, bitumen content test, temperature test of bitumen mixed aggregate, and core test for density and thickness are required.
For sub-base, compaction/density test, sieve analysis of coarse aggregate, and CBR or Los Angeles Abrasion Test are required.
All required tests on materials must be conducted as directed by the Engineer-in-Charge, adhering to IRC/MoSRT&H/ISI specifications.
The contractor must provide all materials required for the work, conforming to relevant latest editions of BIS specifications and Codes of Practices.
The contractor must provide suitable scaffolding, working platforms, gangways, and stairways for safe work.
Adequate precautions must be taken against electrical equipment and fire.
Personal safety equipment must be adequately available and maintained for all employed persons.
The contractor must engage qualified and experienced Resident Engineer(s) and Assistant(s) to the satisfaction of BMC.

Source: Original DTCNView source document

Contract conditions

18 items

The period of completion for works ranges from 60 to 180 calendar days.
Bids must be submitted online through www.tendersodisha.gov.in by 05:00 P.M. of October 30, 2026.
Technical and Financial Bids will be opened on October 31, 2026, from 11:00 A.M. onwards.

Show 15 more

If the accepted bid price is abnormally low (ROPL below -10%), the bidder may be debarred from participating in BMC tenders for one year.
The successful bidder must submit a work program and sign the agreement within 7 days of the LoA.
If the L1 bidder fails to sign the agreement, they will be debarred for at least three years, and the L2 bidder may be called if they match L1's rate and conditions.
The bid validity period is 120 days from the date of opening.
If the percentage rate quoted is lower than or equal to 15% less, the bid will be rejected, unless multiple bids are at 14.99% less, in which case a lottery system will be used.
A penalty for delay in execution will be computed at 1.50% per month on a per-day basis, not exceeding 10% of the Tendered Value of work.
The contractor shall bear all Taxes, Duties, Levies, Cess, Entry Tax, Income Tax, Royalties, Fair Weather Charges, and Tollages.
The contractor is responsible for safe custody of materials at work sites.
Contractors may be blacklisted for misbehavior, tender fixing, non-achievement of milestones, violation of contract conditions, jeopardizing state security, or submitting false documents.
The jurisdiction for legal disputes is within the State of Odisha.
Extension of time may be granted for unavoidable circumstances not attributable to the contractor, without monetary compensation or price escalation.
Deviation of quantity exceeding 10% of the contract value requires prior approval from the competent authority.
Bills must be submitted monthly, and measurements will be verified within 10 days.
All intermediate payments are advances against the final payment; defective work found later must be rectified by the contractor without additional payment.
The final bill must be submitted within two months of completion, and the contractor must sign the MB and Bill Form with a 'No Claim Certificate'.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Costs

Estimated value

₹12,64,700

₹12.65 lakh

EMD / bid security

₹12,700

Exemption available for eligible bidders

Tender fee

₹6,000

Cost of bid document

Bid validity: 120 days

Security & deductions from the DTCN (8)

SC/ST contractors up to 'B' Class are eligible for 50% reduction in security deposit (EMD, Initial Security, Performance Security) and 10% price preference.
Earnest Money Deposit (EMD) is 1% of the Estimated Cost for each work and must be remitted online.
Initial Security Deposit (ISD) of not less than 2% of the accepted tender value must be furnished within 7 days of Letter of Acceptance (LoA).
Additional Performance Security (APS) is required if the accepted bid price is lower than the Cost Put to Tender, calculated incrementally based on the percentage difference.
The APS must be deposited within 7 days from the date of communication.
5% of each bill amount will be withheld towards performance security, which along with EMD and ISD, forms the Security Deposit.
The contractor shall not subcontract/sublet the work; doing so will result in rescission of contract, forfeiture of EMD/ISD, and penalties.
BMC reserves the right to rescind the contract for various defaults, including defective work, suspension of progress, or failure to comply with DTCN, leading to forfeiture of ISD/SD/APS and a 20% penalty on the leftover work value.

Source: Original DTCN

Frequently asked questions

Repair of road at Radha Krushna Basti-A, B Harijan Sahi, Sadak Sahi, Durga Mandap Basti, PWD and Pichu Padia Basti at Unit-6 and 7 in Ward No. 46

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

Repair of road at Radha Krushna Basti-A, B Harijan Sahi, Sadak Sahi, Durga Mandap Basti, PWD and Pichu Padia Basti at Unit-6 and 7 in Ward No. 46

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more