What is the last date to bid for this tender?

Bids must be submitted on the Odisha eProcurement portal (tendersodisha.gov.in) by 12 Nov 2026, 05:00 PM. Bids are scheduled to open on 13 Nov 2026, 01:00 PM.

What is the estimated value of this tender?

The estimated tender value is ₹16.37 L (₹16,37,478).

How much EMD is required?

The EMD (bid security) is ₹17.0K (₹17,000). The portal lists EMD exemption as available for eligible bidders — check the DTCN for who qualifies.

Who can bid for this tender?

The DTCN states: Contractors registered with the State Government or equivalent grade/class registered with Central Government/MES/Railways for civil works are eligible; Bidders must be an empanelled fire licensed agency of Class D or above authorized by Odisha Fire & Emergency Service.

What work experience is required?

As extracted from the DTCN: Bidders must have executed at least one similar nature of work (Construction/AMC of Fire Fighting System installation such as hydrants, sprinklers, pump and other related accessories, fire detection in a single/multistoried building under Government/undertaking organizations).

What is the completion period?

The period of work is 60 days, and bids must remain valid for 90 days.

Which department issued this tender?

This tender was issued by EIC-CIVIL, SERNB-CIRCLE-DHENKANAL, EERNB-DIVN-DHENKANAL; the tender inviting authority is the Divisional Officer.

What documents are required to submit a bid?

The DTCN lists 18 documents, including Cost of Tender Paper (online payment receipt), EMD/Bid Security (online payment receipt), Additional Performance Security (if applicable), Valid Registration Certificate, GST Registration Number, PAN Card, and 12 more.

BuildingLive

Provision of fire down comer system booster pump fire detection and alarm system fire extinguishers and signage at CHC building at belatikiri health instituation of dhenkanal district Buildings.

Dhenkanal EIC-CIVILEERNB-DIVN-DHENKANAL

Tender ID 2026_EICCL_144687_1Ref SE DKL R AND B 27/2026-2027

Estimated value: ₹16.37 L
EMD: ₹17.0K; Exemption available
Tender fee: ₹6.0K
Work period: 60 days

Closing in

9 days left

12 Nov 2026, 05:00 PM

About this tender

EIC-CIVIL has invited bids for “Provision of fire down comer system booster pump fire detection and alarm system fire extinguishers and signage at CHC building at belatikiri health instituation of dhenkanal district Buildings.” in Dhenkanal district, Odisha. The estimated tender value is ₹16.37 lakh and the completion period is 60 days. Bids must be submitted by 12 Nov 2026, 05:00 PM.

Bid readiness

Based on the tender, not your profile

Done: Tender is currently open
Done: BOQ available · 54 items
Done: DTCN analysed · 63 requirements extracted
Done: 18 required documents identified
Needs review: Experience requirement needs review
Needs review: Financial requirements need review

Review requirements

Important dates

All times IST, as published on the portal

Published30 Oct 2026, 01:00 PM
Document downloadUntil 12 Nov 2026
Submission deadline· 9 days left12 Nov 2026, 05:00 PM
Bid opening13 Nov 2026, 01:00 PM

Tender intelligence

Eligibility & bid requirements

DTCN analysed63 requirements extracted18 documents identifiedExtracted from the official tender document

This tender from the Government of Odisha, Works Department, invites bids for the provision of fire downcomer systems, booster pumps, fire detection and alarm systems, fire extinguishers, and signage at various Health Institutions in Dhenkanal District. The work involves electrical installation (E.I. Work) with an estimated cost of Rs. 16,37,478.00 for the CHC Building at Beltikiri Health Institution. Bidders must be empanelled fire licensed agencies of Class D or above, authorized by Odisha Fire & Emergency Service, and have a Memorandum of Understanding (MoU) with an associate electrical contractor (MV/HT or above) holding a valid license from ELBO.

Eligibility

7 items

Contractors registered with the State Government or equivalent grade/class registered with Central Government/MES/Railways for civil works are eligible.
Bidders must be an empanelled fire licensed agency of Class D or above authorized by Odisha Fire & Emergency Service.
Bidders must have a Memorandum of Understanding (MoU) with an associate electrical contractor (MV/HT or above) having a valid license from ELBO.

Show 4 more

The Court Affidavit for the MoU must specifically mention names, addresses, license numbers, validity dates, issuing authorities of both parties, and the name of the work.
Contractors not registered under the State Government must register under the appropriate authority of the State Government of Odisha in the appropriate class of eligibility before the award of work.
Bidders must not be associated, directly or indirectly, with the Consultant or any other entity that prepared the design, specifications, or other documents for the Project or is proposed as Project Manager.
Bidders will be disqualified if they have made misleading or false representations, have a record of poor performance, indulged in unlawful/corrupt means, or are blacklisted/had their registrations suspended.

Source: Original DTCNView source document

Experience

1 item

Bidders must have executed at least one similar nature of work (Construction/AMC of Fire Fighting System installation such as hydrants, sprinklers, pump and other related accessories, fire detection in a single/multistoried building under Government/undertaking organizations).

Source: Original DTCNView source document

Financial

11 items

SC/ST contractors may claim a 10% price preference by submitting valid caste certificates and specifically claiming it in an affidavit, along with Additional Performance Security exclusively for price preference.
Contractors exempted from EMD payment must submit scanned copies of documentary evidence for exemption.
The bid security amount for the work at CHC Building at Beltikiri Health Institution is Rs. 17,000.00.

Show 8 more

Bidders desirous of hiring machinery or equipment from outside the State or owned but deployed outside the State must furnish 2% of the amount put to tender as Bid Security.
Contractors exempted from EMD must submit a scanned copy of an affidavit stating how many times such facility has been availed during the current financial year.
Non-submission of bid security within the designated period will debar the bidder from participating and lead to cancellation of portal registration.
Additional Performance Security (APS) is required if the bid amount is less than the estimated cost, to be furnished within seven days of the Letter of Acceptance (LOA).
APS calculation: 0% for bids below 0% but not below 10% of project cost; 0.1% increment for every percentage below 10% (starting at 11%) for bids below 10% but not below 20%; 0.2% increment for every percentage below 20% plus 1% for bids 20% or more below project cost.
The APS shall be treated as part of the performance security.
Penalty for delay in supply, erection, testing, and commissioning is 0.5% of the order value per month, up to a maximum of 5%, along with EMD forfeiture.
The contractor must rectify any work recommended by the Electrical Inspector at their own cost; non-compliance will lead to forfeiture of security deposit.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

28 items

A firm engaged by the Engineer-in-Charge to provide consulting services for the preparation or supervision of the works, and its affiliates, are ineligible to bid.
The work involves the provision of fire downcomer systems, booster pumps, fire detection and alarm systems, fire extinguishers, and signage.
Earthing shall be carried out according to Indian Electricity Rules, relevant electrical supply authority regulations, and Indian Standard Specification No. IS:732 and IS-3043, ensuring adequate mechanical strength.

Show 25 more

The earthing work includes non-current carrying metallic parts of all equipment, conduit pipes, cables, cable supports, and earth strips.
The supplier is responsible for installation, testing, and commissioning of all supplied equipment and materials, including miscellaneous wiring, supports, and earthing, to the satisfaction of the Government Electrical Inspector.
The supplier must submit samples of each equipment and material for final approval immediately after offer acceptance.
The supplier must assist in obtaining approval from the Government Electrical Inspector prior to energization and supply necessary drawings, test certificates, and test results.
Any additions or alterations required by the Government Electrical Inspector/Local Authorities must be carried out by the supplier at their own expense.
All equipment and materials must comply with the Factories Act, Fire Regulations, local Laws/Bye-Laws, and be of well-tried design and high quality.
Materials supplied are subject to inspection and approval by the officer or representative, with rejected materials to be removed at the contractor's cost.
The supplier must furnish a complete list of tools, appliances, and accessories required for installation.
All drawings, test certificates, and manuals must be in English and use metric units.
The tenderer must submit general arrangement drawings for installation work with the tender.
The contractor must submit layout and general arrangement drawings, and typical details of all installation work in three sets for approval before commencing manufacturing and site installation.
Technical literature, operating instructions, and maintenance manuals must be supplied in triplicate after installation.
Manufacturer's standard tests in accordance with Indian standards must be carried out on all equipment and accessories.
All equipment must be tested at site before commissioning according to adopted standards and Indian Electricity Rules; voltage tests must be carried out on each circuit.
The contractor must abide by CPWD code rules, Indian Electricity rules 1956, BIS, CEA regulations, NEC, NBC, and other relevant codes and standards.
Samples of materials may be collected and sent for testing; unsatisfactory materials must be replaced free of cost.
The contractor must use approved and tested materials as per PWD/CPWD/BIS/NEC/NBC specifications.
Dewatering, if necessary, is included in the quoted rates.
The contractor must arrange materials, borrow areas, and hutments at their own cost.
The contractor must ensure mechanical execution for all cement concrete works, using concrete mixers, vibrators, pumps, etc.
Shuttering and centering must be with steel plate or seasoned hardwood planks, lined with suitable sheeting to be leak-proof and watertight.
The contractor must arrange necessary tools and plants at their own cost, with rates inclusive of running charges and transportation.
The contractor must clear the site of all surplus materials and equipment after work completion.
The Electrical supervisor and linemen mentioned on the license must supervise the work at the site.
The contractor must submit detailed drawings and designs for approval before agreement and work order.

Source: Original DTCNView source document

Contract conditions

16 items

The bid identification number is SE-DKL(R&B)–27/2026-27.
The period of completion for the work is 2 (Two) Calendar Months.
Bid documents are available on www.tendersodisha.gov.in from 10:00 AM on 29.10.2026 to 5:00 PM on 12.11.2026.

Show 13 more

Bids must be received online on or before 12.11.2026 up to 5:00 PM.
Bids will be opened at 11:00 AM on 13.11.2026.
Bids shall remain valid for a period not less than 90 days after the deadline for submission.
The successful lowest bidder must produce original documents within 5 days of price bid opening; failure to do so will result in debarment for 3 years and blacklisting.
If the L1 bidder fails to turn up for agreement, they will be debarred for three years and blacklisted; the L2 bidder may be called if they negotiate at par with the L1 bid.
The authority reserves the right to reject any or all tenders without assigning any reason.
The defect liability period is 42 months for LED fitting and 18 months for other parts of the work from the date of completion, or 36 months for LED fitting and 12 months for other parts of the work after commissioning, whichever is earlier.
The contractor is responsible for rectifying defects during the defect liability period; failure to do so will result in departmental execution at the contractor's cost, with compensation at 1% of the estimate per day for up to ten days.
No advance payment will be made.
Part/full payment will be made after completion of supply, erection, testing, commissioning, inspection by Electrical Inspector, charging of the line, and satisfactory operation.
The amount quoted price shall remain firm and fixed until completion of the project.
The contractor must liaison with CESU DISCOM authority and the Electrical Inspector for permission and inspection, depositing required charges on behalf of the Superintending Engineer.
The actual layout drawing must be approved by the concerned electrical inspector before starting work.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Bill of quantities

54 priced items · ₹16.37 L (₹16,37,478)

Download BOQ file

Major components

Share of BOQ amount, grouped by item description

Electrical32%₹5.17 L
Plumbing & water supply19%₹3.08 L
Concrete & RCC18%₹2.88 L
Plaster, paint & finishing9%₹1.53 L
Doors, windows & steelwork3%₹51.7K
Other items20%₹3.21 L

Largest items

By amount

Fire detection and alarm system Supply, Installation,Testing & Commisioning of Microprocessor based Addresabl…Item 23 · 1 each₹2.59 L
PIPE & VALVES ETC. Supplying, installation testing and commissioning of the following-: C class MS Pipe as pe…Item 5 · 85 mtr₹2.09 L
EXTINGUISHER SYSTEM Providing and fixing carbon-di-oxide type fire extinguishers consisting of welded M.S cyl…Item 34 · 16 nos₹1.23 L
Supply and Fixing of Structural steel like MS Beam (ISMB) 200 X 100, MS Channel (ISMC) 100 X 50 X 5, MS Angle…Item 49 · 750 kg₹97.5K
Supplying, installing, testing and commissioning of photo electric (optical) smoke detector with base, juncti…Item 26 · 26 nos₹87.1K

Tender details

Tender reference: SE DKL R AND B 27/2026-2027
Tender ID: 2026_EICCL_144687_1
District: Dhenkanal
Location: Dhenkanal
Tender type: Open Tender
Tender category: Works
Period of work: 60 days

Show all 9 fields

Product category: Electrical Works
Pincode: 759001

Authority

State
Government of Odisha
Department
EIC-CIVIL
Organisation
SERNB-CIRCLE-DHENKANAL
Office
EERNB-DIVN-DHENKANAL
Inviting authority
Divisional Officer

All EIC-CIVIL tenders in Dhenkanal →

Costs

Estimated value: ₹16,37,478; ₹16.37 lakh
EMD / bid security: ₹17,000; Exemption available for eligible bidders
Tender fee: ₹6,000; Cost of bid document

Bid validity: 90 days

Security & deductions from the DTCN (11)

SC/ST contractors may claim a 10% price preference by submitting valid caste certificates and specifically claiming it in an affidavit, along with Additional Performance Security exclusively for price preference.
Contractors exempted from EMD payment must submit scanned copies of documentary evidence for exemption.
The bid security amount for the work at CHC Building at Beltikiri Health Institution is Rs. 17,000.00.
Bidders desirous of hiring machinery or equipment from outside the State or owned but deployed outside the State must furnish 2% of the amount put to tender as Bid Security.
Contractors exempted from EMD must submit a scanned copy of an affidavit stating how many times such facility has been availed during the current financial year.
Non-submission of bid security within the designated period will debar the bidder from participating and lead to cancellation of portal registration.
Additional Performance Security (APS) is required if the bid amount is less than the estimated cost, to be furnished within seven days of the Letter of Acceptance (LOA).
APS calculation: 0% for bids below 0% but not below 10% of project cost; 0.1% increment for every percentage below 10% (starting at 11%) for bids below 10% but not below 20%; 0.2% increment for every percentage below 20% plus 1% for bids 20% or more below project cost.
The APS shall be treated as part of the performance security.
Penalty for delay in supply, erection, testing, and commissioning is 0.5% of the order value per month, up to a maximum of 5%, along with EMD forfeiture.
The contractor must rectify any work recommended by the Electrical Inspector at their own cost; non-compliance will lead to forfeiture of security deposit.

Source: Original DTCN

Frequently asked questions

About this tender

Eligibility & bid requirements

DTCN analysed63 requirements extracted18 documents identifiedExtracted from the official tender document

Eligibility

7 items

Contractors registered with the State Government or equivalent grade/class registered with Central Government/MES/Railways for civil works are eligible.
Bidders must be an empanelled fire licensed agency of Class D or above authorized by Odisha Fire & Emergency Service.
Bidders must have a Memorandum of Understanding (MoU) with an associate electrical contractor (MV/HT or above) having a valid license from ELBO.

Show 4 more

The Court Affidavit for the MoU must specifically mention names, addresses, license numbers, validity dates, issuing authorities of both parties, and the name of the work.
Contractors not registered under the State Government must register under the appropriate authority of the State Government of Odisha in the appropriate class of eligibility before the award of work.
Bidders must not be associated, directly or indirectly, with the Consultant or any other entity that prepared the design, specifications, or other documents for the Project or is proposed as Project Manager.
Bidders will be disqualified if they have made misleading or false representations, have a record of poor performance, indulged in unlawful/corrupt means, or are blacklisted/had their registrations suspended.

Source: Original DTCNView source document

Experience

1 item

Bidders must have executed at least one similar nature of work (Construction/AMC of Fire Fighting System installation such as hydrants, sprinklers, pump and other related accessories, fire detection in a single/multistoried building under Government/undertaking organizations).

Source: Original DTCNView source document

Financial

11 items

SC/ST contractors may claim a 10% price preference by submitting valid caste certificates and specifically claiming it in an affidavit, along with Additional Performance Security exclusively for price preference.
Contractors exempted from EMD payment must submit scanned copies of documentary evidence for exemption.
The bid security amount for the work at CHC Building at Beltikiri Health Institution is Rs. 17,000.00.

Show 8 more

Bidders desirous of hiring machinery or equipment from outside the State or owned but deployed outside the State must furnish 2% of the amount put to tender as Bid Security.
Contractors exempted from EMD must submit a scanned copy of an affidavit stating how many times such facility has been availed during the current financial year.
Non-submission of bid security within the designated period will debar the bidder from participating and lead to cancellation of portal registration.
Additional Performance Security (APS) is required if the bid amount is less than the estimated cost, to be furnished within seven days of the Letter of Acceptance (LOA).
APS calculation: 0% for bids below 0% but not below 10% of project cost; 0.1% increment for every percentage below 10% (starting at 11%) for bids below 10% but not below 20%; 0.2% increment for every percentage below 20% plus 1% for bids 20% or more below project cost.
The APS shall be treated as part of the performance security.
Penalty for delay in supply, erection, testing, and commissioning is 0.5% of the order value per month, up to a maximum of 5%, along with EMD forfeiture.
The contractor must rectify any work recommended by the Electrical Inspector at their own cost; non-compliance will lead to forfeiture of security deposit.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

28 items

A firm engaged by the Engineer-in-Charge to provide consulting services for the preparation or supervision of the works, and its affiliates, are ineligible to bid.
The work involves the provision of fire downcomer systems, booster pumps, fire detection and alarm systems, fire extinguishers, and signage.
Earthing shall be carried out according to Indian Electricity Rules, relevant electrical supply authority regulations, and Indian Standard Specification No. IS:732 and IS-3043, ensuring adequate mechanical strength.

Show 25 more

The earthing work includes non-current carrying metallic parts of all equipment, conduit pipes, cables, cable supports, and earth strips.
The supplier is responsible for installation, testing, and commissioning of all supplied equipment and materials, including miscellaneous wiring, supports, and earthing, to the satisfaction of the Government Electrical Inspector.
The supplier must submit samples of each equipment and material for final approval immediately after offer acceptance.
The supplier must assist in obtaining approval from the Government Electrical Inspector prior to energization and supply necessary drawings, test certificates, and test results.
Any additions or alterations required by the Government Electrical Inspector/Local Authorities must be carried out by the supplier at their own expense.
All equipment and materials must comply with the Factories Act, Fire Regulations, local Laws/Bye-Laws, and be of well-tried design and high quality.
Materials supplied are subject to inspection and approval by the officer or representative, with rejected materials to be removed at the contractor's cost.
The supplier must furnish a complete list of tools, appliances, and accessories required for installation.
All drawings, test certificates, and manuals must be in English and use metric units.
The tenderer must submit general arrangement drawings for installation work with the tender.
The contractor must submit layout and general arrangement drawings, and typical details of all installation work in three sets for approval before commencing manufacturing and site installation.
Technical literature, operating instructions, and maintenance manuals must be supplied in triplicate after installation.
Manufacturer's standard tests in accordance with Indian standards must be carried out on all equipment and accessories.
All equipment must be tested at site before commissioning according to adopted standards and Indian Electricity Rules; voltage tests must be carried out on each circuit.
The contractor must abide by CPWD code rules, Indian Electricity rules 1956, BIS, CEA regulations, NEC, NBC, and other relevant codes and standards.
Samples of materials may be collected and sent for testing; unsatisfactory materials must be replaced free of cost.
The contractor must use approved and tested materials as per PWD/CPWD/BIS/NEC/NBC specifications.
Dewatering, if necessary, is included in the quoted rates.
The contractor must arrange materials, borrow areas, and hutments at their own cost.
The contractor must ensure mechanical execution for all cement concrete works, using concrete mixers, vibrators, pumps, etc.
Shuttering and centering must be with steel plate or seasoned hardwood planks, lined with suitable sheeting to be leak-proof and watertight.
The contractor must arrange necessary tools and plants at their own cost, with rates inclusive of running charges and transportation.
The contractor must clear the site of all surplus materials and equipment after work completion.
The Electrical supervisor and linemen mentioned on the license must supervise the work at the site.
The contractor must submit detailed drawings and designs for approval before agreement and work order.

Source: Original DTCNView source document

Contract conditions

16 items

The bid identification number is SE-DKL(R&B)–27/2026-27.
The period of completion for the work is 2 (Two) Calendar Months.
Bid documents are available on www.tendersodisha.gov.in from 10:00 AM on 29.10.2026 to 5:00 PM on 12.11.2026.

Show 13 more

Bids must be received online on or before 12.11.2026 up to 5:00 PM.
Bids will be opened at 11:00 AM on 13.11.2026.
Bids shall remain valid for a period not less than 90 days after the deadline for submission.
The successful lowest bidder must produce original documents within 5 days of price bid opening; failure to do so will result in debarment for 3 years and blacklisting.
If the L1 bidder fails to turn up for agreement, they will be debarred for three years and blacklisted; the L2 bidder may be called if they negotiate at par with the L1 bid.
The authority reserves the right to reject any or all tenders without assigning any reason.
The defect liability period is 42 months for LED fitting and 18 months for other parts of the work from the date of completion, or 36 months for LED fitting and 12 months for other parts of the work after commissioning, whichever is earlier.
The contractor is responsible for rectifying defects during the defect liability period; failure to do so will result in departmental execution at the contractor's cost, with compensation at 1% of the estimate per day for up to ten days.
No advance payment will be made.
Part/full payment will be made after completion of supply, erection, testing, commissioning, inspection by Electrical Inspector, charging of the line, and satisfactory operation.
The amount quoted price shall remain firm and fixed until completion of the project.
The contractor must liaison with CESU DISCOM authority and the Electrical Inspector for permission and inspection, depositing required charges on behalf of the Superintending Engineer.
The actual layout drawing must be approved by the concerned electrical inspector before starting work.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Costs

Estimated value

₹16,37,478

₹16.37 lakh

EMD / bid security

₹17,000

Exemption available for eligible bidders

Tender fee

₹6,000

Cost of bid document

Bid validity: 90 days

Security & deductions from the DTCN (11)

SC/ST contractors may claim a 10% price preference by submitting valid caste certificates and specifically claiming it in an affidavit, along with Additional Performance Security exclusively for price preference.
Contractors exempted from EMD payment must submit scanned copies of documentary evidence for exemption.
The bid security amount for the work at CHC Building at Beltikiri Health Institution is Rs. 17,000.00.
Bidders desirous of hiring machinery or equipment from outside the State or owned but deployed outside the State must furnish 2% of the amount put to tender as Bid Security.
Contractors exempted from EMD must submit a scanned copy of an affidavit stating how many times such facility has been availed during the current financial year.
Non-submission of bid security within the designated period will debar the bidder from participating and lead to cancellation of portal registration.
Additional Performance Security (APS) is required if the bid amount is less than the estimated cost, to be furnished within seven days of the Letter of Acceptance (LOA).
APS calculation: 0% for bids below 0% but not below 10% of project cost; 0.1% increment for every percentage below 10% (starting at 11%) for bids below 10% but not below 20%; 0.2% increment for every percentage below 20% plus 1% for bids 20% or more below project cost.
The APS shall be treated as part of the performance security.
Penalty for delay in supply, erection, testing, and commissioning is 0.5% of the order value per month, up to a maximum of 5%, along with EMD forfeiture.
The contractor must rectify any work recommended by the Electrical Inspector at their own cost; non-compliance will lead to forfeiture of security deposit.

Source: Original DTCN

Frequently asked questions

Provision of fire down comer system booster pump fire detection and alarm system fire extinguishers and signage at CHC building at belatikiri health instituation of dhenkanal district Buildings.

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

Provision of fire down comer system booster pump fire detection and alarm system fire extinguishers and signage at CHC building at belatikiri health instituation of dhenkanal district Buildings.

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more