What is the last date to bid for this tender?

Bids must be submitted on the Odisha eProcurement portal (tendersodisha.gov.in) by 30 Oct 2026, 05:00 PM. Bids are scheduled to open on 31 Oct 2026, 11:00 AM.

What is the estimated value of this tender?

The estimated tender value is ₹11.01 L (₹11,01,319).

How much EMD is required?

The EMD (bid security) is ₹11.1K (₹11,100). The portal lists EMD exemption as available for eligible bidders — check the DTCN for who qualifies.

Who can bid for this tender?

The DTCN states: Contractors must be registered as 'D', 'C', or 'B' Class as indicated for each work in the DTCN; Contractors registered with the Odisha State Government or equivalent grade/class registered with Central Government/any other State Government/MES/Railways are eligible.

What work experience is required?

As extracted from the DTCN: Non-Civil Engineer contractors must deploy at least one experienced Civil Engineer at the work site full-time, holding a Diploma or Degree in Civil Engineering from an AICTE-recognized institute with at least two years of post-qualification experience.

What is the completion period?

The period of work is 60 days, and bids must remain valid for 120 days.

Which department issued this tender?

This tender was issued by Municipal Bodies, Bhubaneswar Municipal Corporation; the tender inviting authority is the Executive Engineer (Central Tender Cell).

What documents are required to submit a bid?

The DTCN lists 14 documents, including Cost of Bid Document (Online remittance), Earnest Money Deposit (EMD) (Online remittance), Valid Registration Certificate, Valid GST Registration Certificate & GSTIN, PAN Card, No Relationship Certificate (Non-Judicial Stamp Paper), and 8 more.

RoadClosed

Improvement of Road inside the Bayababa Basti in Ward No. 35

BMC AREA, Khordha Municipal BodiesBhubaneswar Municipal Corporation

Tender ID 2026_ORULB_143600_8Ref BMC-EE-Tender Cell-82/2026-27 dt. 13.10.2026

Estimated value: ₹11.01 L
EMD: ₹11.1K; Exemption available
Tender fee: ₹6.0K
Work period: 60 days

Bid submission

Closed

Closed on 30 Oct 2026, 05:00 PM

Bid submission for this tender has closed. Browse closed tenders in the archive →

About this tender

Municipal Bodies has invited bids for “Improvement of Road inside the Bayababa Basti in Ward No. 35” in BMC AREA, Khordha district, Odisha. The estimated tender value is ₹11.01 lakh and the completion period is 60 days. Bids must be submitted by 30 Oct 2026, 05:00 PM.

Bid readiness

Based on the tender, not your profile

Not available: Bid submission has closed
Done: BOQ available · 7 items
Done: DTCN analysed · 45 requirements extracted
Done: 14 required documents identified
Needs review: Experience requirement needs review
Needs review: Financial requirements need review

Review requirements

Important dates

All times IST, as published on the portal

Published17 Oct 2026, 10:30 AM
Document downloadUntil 30 Oct 2026
Submission deadline30 Oct 2026, 05:00 PM
Bid opening31 Oct 2026, 11:00 AM

Tender intelligence

Eligibility & bid requirements

DTCN analysed45 requirements extracted14 documents identifiedExtracted from the official tender document

The Bhubaneswar Municipal Corporation invites bids for 28 civil construction and repair works, with estimated costs ranging from Rs. 8.47 Lakhs to Rs. 46.60 Lakhs. The works have completion periods between 60 and 180 calendar days. Eligible contractors must be registered as 'D', 'C', or 'B' class with the Odisha State Government or equivalent, and bids are submitted online through the e-Procurement portal.

Eligibility

5 items

Contractors must be registered as 'D', 'C', or 'B' Class as indicated for each work in the DTCN.
Contractors registered with the Odisha State Government or equivalent grade/class registered with Central Government/any other State Government/MES/Railways are eligible.
Contractors registered elsewhere but not with the Government of Odisha must register with the appropriate state authority before work award/agreement signing.

Show 2 more

Bidders must possess an up-to-date compatible Digital Signature Certificate.
Bidders undergoing Corporate Debt Restructuring (CDR)/Strategic Debt Restructuring (SDR), facing recovery proceedings from Financial Institutions, or declared 'Sick' by BIFR are not eligible.

Source: Original DTCNView source document

Experience

1 item

Non-Civil Engineer contractors must deploy at least one experienced Civil Engineer at the work site full-time, holding a Diploma or Degree in Civil Engineering from an AICTE-recognized institute with at least two years of post-qualification experience.

Source: Original DTCNView source document

Financial

12 items

SC/ST contractors up to 'B' Class may deposit Security Deposit (EMD, initial security, and Performance Security) at half the usual rate.
Bidders claiming full or partial exemption for ISD must submit necessary documentary evidence with their online bid.
Each intending bidder must furnish EMD at 1% of the Estimated Cost, submitted online.

Show 9 more

The successful bidder must furnish Initial Security Deposit (ISD) of not less than 2% of the accepted tender value within 7 days of the Letter of Acceptance (LoA).
Additional Performance Security (APS) is required if the accepted bid price is lower than the Cost Put to Tender, calculated incrementally based on the percentage difference.
The APS must be deposited within 7 days from the date of communication to the bidder.
If the accepted bid price is such that the ROPL is up to (-)10%, no APS is required.
If the accepted bid price is such that the ROPL is below (-)10% but not below (-)20%, APS is incremented by 0.2% for every percentage of ROPL below (-)10%.
If the accepted bid price is such that the ROPL is below (-)20% but not below (-)30%, APS is incremented by 0.3% for every percentage of ROPL below (-)20% plus 2% of the accepted bid price.
If the accepted bid price is such that the ROPL is below (-)30% or more, APS is incremented by 0.5% for every percentage of ROPL below (-)30% plus 5% of the accepted bid price.
5% of each bill amount will be withheld by BMC towards performance security.
The EMD and ISD (as applicable) with withheld performance security will be treated as Security Deposit (SD) and retained until agreement conditions are fulfilled.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

12 items

Bidders must ensure they have or have a lease/hire agreement for tools, plants, equipment, and machinery as per Schedule-A.
Successful bidders (unless Civil Engineer contractors) must deploy at least one experienced Civil Engineer at the work site for the full duration of layout and execution.
The deployed Civil Engineer must hold a Diploma or Degree in Civil Engineering from an AICTE-recognized institute.

Show 9 more

The Civil Engineer must have at least two years of post-qualification experience in Civil Engineering survey, monitoring and quality control, or civil engineering construction works with quantity measurements, or a combination.
Bidders must possess or have a lease/hire agreement for tools, plants, equipment, and machinery as per Schedule-A.
The contractor shall provide all materials required for the work, conforming to relevant latest editions of BIS specifications and Codes of Practices.
The contractor must facilitate quality tests through Government or Government authorized laboratories, coordinating sample collection, preservation, handling, and testing.
For paver blocks/kerb stones, quality certificates from the manufacturer for each consignment are required.
For concrete roads, slump cone tests, compressive strength tests (7 & 28 days), core cutting tests, and sieve analysis of coarse aggregates (for PCC) are required.
For Ready Mix Concrete, a test certificate detailing mix proportions, cement type/make, plasticizer/admixture details, and concrete grade is required for each project.
For asphalt roads, quality and grade of bitumen certificates, bitumen content tests, temperature tests of bitumen mixed aggregate, and core tests for density and thickness are required.
For sub-base, compaction/density tests, sieve analysis of coarse aggregate, and CBR or Los Angeles Abrasion Tests are required.

Source: Original DTCNView source document

Contract conditions

15 items

The period of completion for works ranges from 60 to 180 Calendar Days.
The bid document is available from 10:30 A.M. on 17.10.2026 to 05:00 P.M. on 30.10.2026.
The last date/time for submission of bids is 05:00 P.M. on 30.10.2026.

Show 12 more

Technical and Financial Bids will be opened from 11:00 A.M. onwards on 31.10.2026.
The successful bidder must submit a work program and sign the agreement within 7 days from the date of issue of LoA.
Bids where the percentage rate quoted is lower than or equal to 15% less than the estimated cost will be rejected.
Each received bid, if not rejected, shall remain valid for a period of 120 days from the date of opening.
The contractor shall bear all Taxes, Duties, Levies, Cess, Entry Tax, Income Tax, Royalties, Fair Weather Charges, and Tollages.
No payment will be made for preparatory/facilitating works.
The contractor is responsible for the safe custody of materials at work sites.
The contractor shall not subcontract/sublet the work.
Penalty for delay in execution is 1.50% per month on a per-day basis, not exceeding 10% of the Tendered Value of work.
If the work is executed with unsound, imperfect, or unskilful workmanship, the contractor must rectify/remove/dismantle and rebuild/reconstruct it at no extra cost.
Blacklisting may occur for misbehavior, tender fixing, non-achievement of milestones, persistent contract violations, jeopardizing state security, or submitting false documents.
For legal disputes, the jurisdiction will be within the State of Odisha.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Bill of quantities

7 priced items · ₹11.01 L (₹11,01,319)

Download BOQ file

Major components

Share of BOQ amount, grouped by item description

Concrete & RCC94%₹10.38 L
Reinforcement steel6%₹63.0K

Largest items

By amount

R.C.C M-25 with 20mm size Crusher broken chips including all cost, conveyance, royalty & taxes etc.compete of…Item 2 · 136.5 Cum₹8.94 L
Supplying fitting & placing uncoated HYSD reinforcement including cutting, bendind,binding & placing the stee…Item 3 · 6.6 Qntl₹63.0K
Rigid Smooth centerinmg and Shuttering including false work and removing the same after casting etc.complete.…Item 4 · 56 sqm₹60.9K
Supplying all materials, labour, T&P and providing Cement Concrete (1:4:8) using 4 cm size CBHG metal etc. co…Item 1 · 9.2 Cum₹53.9K
B. SlabItem 4.01 · 75 sqm₹18.9K

Tender details

Tender reference: BMC-EE-Tender Cell-82/2026-27 dt. 13.10.2026
Tender ID: 2026_ORULB_143600_8
District: Khordha
Location: BMC AREA
Tender type: Open Tender
Tender category: Works
Period of work: 60 days

Show all 9 fields

Product category: Civil Works - Roads
Pincode: 751022

Authority

State
Government of Odisha
Department
Municipal Bodies
Body
Bhubaneswar Municipal Corporation
Inviting authority
Executive Engineer (Central Tender Cell)

All Municipal Bodies tenders in Khordha →

Costs

Estimated value: ₹11,01,319; ₹11.01 lakh
EMD / bid security: ₹11,100; Exemption available for eligible bidders
Tender fee: ₹6,000; Cost of bid document

Bid validity: 120 days

Security & deductions from the DTCN (12)

SC/ST contractors up to 'B' Class may deposit Security Deposit (EMD, initial security, and Performance Security) at half the usual rate.
Bidders claiming full or partial exemption for ISD must submit necessary documentary evidence with their online bid.
Each intending bidder must furnish EMD at 1% of the Estimated Cost, submitted online.
The successful bidder must furnish Initial Security Deposit (ISD) of not less than 2% of the accepted tender value within 7 days of the Letter of Acceptance (LoA).
Additional Performance Security (APS) is required if the accepted bid price is lower than the Cost Put to Tender, calculated incrementally based on the percentage difference.
The APS must be deposited within 7 days from the date of communication to the bidder.
If the accepted bid price is such that the ROPL is up to (-)10%, no APS is required.
If the accepted bid price is such that the ROPL is below (-)10% but not below (-)20%, APS is incremented by 0.2% for every percentage of ROPL below (-)10%.
If the accepted bid price is such that the ROPL is below (-)20% but not below (-)30%, APS is incremented by 0.3% for every percentage of ROPL below (-)20% plus 2% of the accepted bid price.
If the accepted bid price is such that the ROPL is below (-)30% or more, APS is incremented by 0.5% for every percentage of ROPL below (-)30% plus 5% of the accepted bid price.
5% of each bill amount will be withheld by BMC towards performance security.
The EMD and ISD (as applicable) with withheld performance security will be treated as Security Deposit (SD) and retained until agreement conditions are fulfilled.

Source: Original DTCN

Frequently asked questions

Eligibility & bid requirements

DTCN analysed45 requirements extracted14 documents identifiedExtracted from the official tender document

Eligibility

5 items

Contractors must be registered as 'D', 'C', or 'B' Class as indicated for each work in the DTCN.
Contractors registered with the Odisha State Government or equivalent grade/class registered with Central Government/any other State Government/MES/Railways are eligible.
Contractors registered elsewhere but not with the Government of Odisha must register with the appropriate state authority before work award/agreement signing.

Show 2 more

Bidders must possess an up-to-date compatible Digital Signature Certificate.
Bidders undergoing Corporate Debt Restructuring (CDR)/Strategic Debt Restructuring (SDR), facing recovery proceedings from Financial Institutions, or declared 'Sick' by BIFR are not eligible.

Source: Original DTCNView source document

Experience

1 item

Non-Civil Engineer contractors must deploy at least one experienced Civil Engineer at the work site full-time, holding a Diploma or Degree in Civil Engineering from an AICTE-recognized institute with at least two years of post-qualification experience.

Source: Original DTCNView source document

Financial

12 items

SC/ST contractors up to 'B' Class may deposit Security Deposit (EMD, initial security, and Performance Security) at half the usual rate.
Bidders claiming full or partial exemption for ISD must submit necessary documentary evidence with their online bid.
Each intending bidder must furnish EMD at 1% of the Estimated Cost, submitted online.

Show 9 more

The successful bidder must furnish Initial Security Deposit (ISD) of not less than 2% of the accepted tender value within 7 days of the Letter of Acceptance (LoA).
Additional Performance Security (APS) is required if the accepted bid price is lower than the Cost Put to Tender, calculated incrementally based on the percentage difference.
The APS must be deposited within 7 days from the date of communication to the bidder.
If the accepted bid price is such that the ROPL is up to (-)10%, no APS is required.
If the accepted bid price is such that the ROPL is below (-)10% but not below (-)20%, APS is incremented by 0.2% for every percentage of ROPL below (-)10%.
If the accepted bid price is such that the ROPL is below (-)20% but not below (-)30%, APS is incremented by 0.3% for every percentage of ROPL below (-)20% plus 2% of the accepted bid price.
If the accepted bid price is such that the ROPL is below (-)30% or more, APS is incremented by 0.5% for every percentage of ROPL below (-)30% plus 5% of the accepted bid price.
5% of each bill amount will be withheld by BMC towards performance security.
The EMD and ISD (as applicable) with withheld performance security will be treated as Security Deposit (SD) and retained until agreement conditions are fulfilled.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

12 items

Bidders must ensure they have or have a lease/hire agreement for tools, plants, equipment, and machinery as per Schedule-A.
Successful bidders (unless Civil Engineer contractors) must deploy at least one experienced Civil Engineer at the work site for the full duration of layout and execution.
The deployed Civil Engineer must hold a Diploma or Degree in Civil Engineering from an AICTE-recognized institute.

Show 9 more

The Civil Engineer must have at least two years of post-qualification experience in Civil Engineering survey, monitoring and quality control, or civil engineering construction works with quantity measurements, or a combination.
Bidders must possess or have a lease/hire agreement for tools, plants, equipment, and machinery as per Schedule-A.
The contractor shall provide all materials required for the work, conforming to relevant latest editions of BIS specifications and Codes of Practices.
The contractor must facilitate quality tests through Government or Government authorized laboratories, coordinating sample collection, preservation, handling, and testing.
For paver blocks/kerb stones, quality certificates from the manufacturer for each consignment are required.
For concrete roads, slump cone tests, compressive strength tests (7 & 28 days), core cutting tests, and sieve analysis of coarse aggregates (for PCC) are required.
For Ready Mix Concrete, a test certificate detailing mix proportions, cement type/make, plasticizer/admixture details, and concrete grade is required for each project.
For asphalt roads, quality and grade of bitumen certificates, bitumen content tests, temperature tests of bitumen mixed aggregate, and core tests for density and thickness are required.
For sub-base, compaction/density tests, sieve analysis of coarse aggregate, and CBR or Los Angeles Abrasion Tests are required.

Source: Original DTCNView source document

Contract conditions

15 items

The period of completion for works ranges from 60 to 180 Calendar Days.
The bid document is available from 10:30 A.M. on 17.10.2026 to 05:00 P.M. on 30.10.2026.
The last date/time for submission of bids is 05:00 P.M. on 30.10.2026.

Show 12 more

Technical and Financial Bids will be opened from 11:00 A.M. onwards on 31.10.2026.
The successful bidder must submit a work program and sign the agreement within 7 days from the date of issue of LoA.
Bids where the percentage rate quoted is lower than or equal to 15% less than the estimated cost will be rejected.
Each received bid, if not rejected, shall remain valid for a period of 120 days from the date of opening.
The contractor shall bear all Taxes, Duties, Levies, Cess, Entry Tax, Income Tax, Royalties, Fair Weather Charges, and Tollages.
No payment will be made for preparatory/facilitating works.
The contractor is responsible for the safe custody of materials at work sites.
The contractor shall not subcontract/sublet the work.
Penalty for delay in execution is 1.50% per month on a per-day basis, not exceeding 10% of the Tendered Value of work.
If the work is executed with unsound, imperfect, or unskilful workmanship, the contractor must rectify/remove/dismantle and rebuild/reconstruct it at no extra cost.
Blacklisting may occur for misbehavior, tender fixing, non-achievement of milestones, persistent contract violations, jeopardizing state security, or submitting false documents.
For legal disputes, the jurisdiction will be within the State of Odisha.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Costs

Estimated value

₹11,01,319

₹11.01 lakh

EMD / bid security

₹11,100

Exemption available for eligible bidders

Tender fee

₹6,000

Cost of bid document

Bid validity: 120 days

Security & deductions from the DTCN (12)

SC/ST contractors up to 'B' Class may deposit Security Deposit (EMD, initial security, and Performance Security) at half the usual rate.
Bidders claiming full or partial exemption for ISD must submit necessary documentary evidence with their online bid.
Each intending bidder must furnish EMD at 1% of the Estimated Cost, submitted online.
The successful bidder must furnish Initial Security Deposit (ISD) of not less than 2% of the accepted tender value within 7 days of the Letter of Acceptance (LoA).
Additional Performance Security (APS) is required if the accepted bid price is lower than the Cost Put to Tender, calculated incrementally based on the percentage difference.
The APS must be deposited within 7 days from the date of communication to the bidder.
If the accepted bid price is such that the ROPL is up to (-)10%, no APS is required.
If the accepted bid price is such that the ROPL is below (-)10% but not below (-)20%, APS is incremented by 0.2% for every percentage of ROPL below (-)10%.
If the accepted bid price is such that the ROPL is below (-)20% but not below (-)30%, APS is incremented by 0.3% for every percentage of ROPL below (-)20% plus 2% of the accepted bid price.
If the accepted bid price is such that the ROPL is below (-)30% or more, APS is incremented by 0.5% for every percentage of ROPL below (-)30% plus 5% of the accepted bid price.
5% of each bill amount will be withheld by BMC towards performance security.
The EMD and ISD (as applicable) with withheld performance security will be treated as Security Deposit (SD) and retained until agreement conditions are fulfilled.

Source: Original DTCN

Frequently asked questions

Improvement of Road inside the Bayababa Basti in Ward No. 35

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

Improvement of Road inside the Bayababa Basti in Ward No. 35

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more