What is the last date to bid for this tender?

Bids must be submitted on the Odisha eProcurement portal (tendersodisha.gov.in) by 10 Nov 2026, 05:00 PM. Bids are scheduled to open on 11 Nov 2026, 11:00 AM.

What is the estimated value of this tender?

The estimated tender value is ₹38.12 L (₹38,12,473).

How much EMD is required?

The EMD (bid security) is ₹38.2K (₹38,200). The portal lists EMD exemption as available for eligible bidders — check the DTCN for who qualifies.

Who can bid for this tender?

The DTCN states: Contractors must be registered with Odisha State Government or equivalent grade/class registered with Central Government/any other State Government/MES/Railways; Bidders must possess an up-to-date compatible Digital Signature Certificate.

What work experience is required?

As extracted from the DTCN: Each intending bidder (unless a Civil Engineer Contractor) declared as a successful bidder must deploy at least one experienced Civil Engineer at the work site for the full time during execution; The deployed Civil Engineer must have a Diploma or Degree in Civil Engineering from an AICTE recognized institute and at least two years of post-qualification experience in civil engineering survey, monitoring, quality control, or construction works.

What is the completion period?

The period of work is 75 days, and bids must remain valid for 120 days.

Which department issued this tender?

This tender was issued by Municipal Bodies, Bhubaneswar Municipal Corporation; the tender inviting authority is the Executive Engineer (Central Tender Cell).

What documents are required to submit a bid?

The DTCN lists 14 documents, including Cost of Bid Document (Online remittance), Earnest Money Deposit (EMD) (Online remittance), Valid Registration Certificate, Valid GST Registration Certificate & GSTIN, PAN Card, No Relationship Certificate (Non-Judicial Stamp Paper), and 8 more.

RoadLive

Improvement of Road from Plot No. 687 to Plot No. 128, Plot No. 13 to 8(C) Jayadurga Nagar in Ward No. 33

BMC AREA, Khordha Municipal BodiesBhubaneswar Municipal Corporation

Tender ID 2026_ORULB_144315_3Ref BMC-EE-Tender Cell-85/2026-27 dt. 23.10.2026

Estimated value: ₹38.12 L
EMD: ₹38.2K; Exemption available
Tender fee: ₹6.0K
Work period: 75 days

Closing in

7 days left

10 Nov 2026, 05:00 PM

About this tender

Municipal Bodies has invited bids for “Improvement of Road from Plot No. 687 to Plot No. 128, Plot No. 13 to 8(C) Jayadurga Nagar in Ward No. 33” in BMC AREA, Khordha district, Odisha. The estimated tender value is ₹38.12 lakh and the completion period is 75 days. Bids must be submitted by 10 Nov 2026, 05:00 PM.

Bid readiness

Based on the tender, not your profile

Done: Tender is currently open
Done: BOQ available · 9 items
Done: DTCN analysed · 38 requirements extracted
Done: 14 required documents identified
Needs review: Experience requirement needs review
Needs review: Financial requirements need review

Review requirements

Important dates

All times IST, as published on the portal

Published29 Oct 2026, 10:30 AM
Document downloadUntil 10 Nov 2026
Submission deadline· 7 days left10 Nov 2026, 05:00 PM
Bid opening11 Nov 2026, 11:00 AM

Tender intelligence

Eligibility & bid requirements

DTCN analysed38 requirements extracted14 documents identifiedExtracted from the official tender document

Bhubaneswar Municipal Corporation invites percentage rate bids for 34 civil construction and repair works across various wards in Bhubaneswar. The estimated costs range from Rs. 3.38 Lakhs to Rs. 42.37 Lakhs. Contractors of 'D', 'C', or 'B' class, as specified for each work, are eligible to bid through the e-Procurement portal.

Eligibility

4 items

Contractors must be registered with Odisha State Government or equivalent grade/class registered with Central Government/any other State Government/MES/Railways.
Bidders must possess an up-to-date compatible Digital Signature Certificate.
Contractors registered elsewhere but not with Government of Odisha must register with the appropriate State Government authority before award of work/signing of agreement.

Show 1 more

Bidders must not have applied for/be undergoing Corporate Debt Restructuring (CDR)/Strategic Debt Restructuring (SDR), facing recovery proceedings from Financial Institutions, or declared 'Sick'/'under consideration as 'Sick' by BIFR.

Source: Original DTCNView source document

Experience

2 items

Each intending bidder (unless a Civil Engineer Contractor) declared as a successful bidder must deploy at least one experienced Civil Engineer at the work site for the full time during execution.
The deployed Civil Engineer must have a Diploma or Degree in Civil Engineering from an AICTE recognized institute and at least two years of post-qualification experience in civil engineering survey, monitoring, quality control, or construction works.

Source: Original DTCNView source document

Financial

7 items

SC/ST contractors up to 'B' Class are eligible for Security Deposit (EMD, Initial Security, Performance Security) at half the usual rate.
Each bidder must furnish EMD @ 1% of the Estimated Cost put to tender, submitted online.
Initial Security Deposit (ISD) of not less than 2% of the accepted tender value must be furnished within 7 days of Letter of Acceptance (LoA).

Show 4 more

Additional Performance Security (APS) will be obtained incrementally if the accepted bid price is lower than the Cost Put to Tender, calculated based on the 'Rounding Off of Percentage Less (ROPL)'.
APS must be deposited within 7 days from the date of communication to the bidder.
5% of each bill amount payable to the contractor will be withheld towards performance security.
The contractor shall not subcontract/sublet the work; violation will lead to rescission of contract and forfeiture of EMD, ISD, and penalty.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

14 items

Bidders must be in possession of or have a lease/hire agreement for tools, plants, equipment, and machineries as per Schedule-A of the DTCN.
Successful bidders (unless Civil Engineer Contractors) must deploy a Civil Engineer with a Diploma/Degree from an AICTE recognized institute and at least two years of post-qualification experience.
Bidders must ensure possession or lease/hire of tools, plants, equipment, and machineries as per Schedule-A.

Show 11 more

The contractor shall conduct all required tests on materials as directed by the Engineer-in-Charge, including specific tests for paver blocks, concrete roads, asphalt roads, and sub-base materials.
Quality certificates from manufacturers are required for paver blocks/kerb stones for each consignment.
For concrete roads, slump cone tests, compressive strength tests (7 & 28 days), core cutting tests, and sieve analysis of coarse aggregates (for PCC) are required.
For Ready Mix Concrete, a test certificate detailing mix proportions, cement type, admixtures, and concrete grade is required.
For asphalt roads, quality and grade certificates for bitumen, bitumen content tests, temperature tests of bitumen mixed aggregate, and core tests for density and thickness are required.
For sub-base, compaction/density tests, sieve analysis of coarse aggregate, and CBR or Los Angeles Abrasion Tests are required.
The contractor shall provide all materials required for the work, conforming to relevant latest BIS specifications and Codes of Practices.
The contractor shall provide suitable scaffolding, working platforms, gangways, stairways, and safe means of access for workmen.
Adequate precautions against electrical equipment and fire must be taken at the work site.
Personal safety equipment must be adequately available and properly used by persons employed at the site.
Qualified and experienced Resident Engineer(s) and Assistant(s) must be engaged for the work to the satisfaction of BMC.

Source: Original DTCNView source document

Contract conditions

11 items

The period of completion ranges from 45 to 150 Calendar Days.
Bids must be submitted online by 05:00 P.M. of 10.11.2026.
Technical and Financial Bids will be opened on 11.11.2026 (11:00 A.M. onwards).

Show 8 more

The successful bidder must submit a work programme and sign the agreement within 7 days from the date of LoA.
If the % rate quoted by any bidder is lower than or equal to 15% less (-), such bid shall be rejected.
Each received bid shall remain valid for a period of 120 days from the date of opening.
A penalty for delay in execution will be computed @1.50% per month on a per-day basis, not exceeding 10% of the Tendered Value of work.
The contractor shall bear all Taxes, Duties, Levies, Cess, Entry Tax, Income Tax, Royalties, Fair Weather Charges, and Tollages.
The contractor shall pay fair wages to all laborers as prescribed by the State Public Works Department or Minimum Wages Act 1948, whichever is higher.
The contractor shall indemnify BMC against all claims for injuries or damages to any person/property arising from negligence or fault of the contractor.
For legal disputes, the jurisdiction shall be within the State of Odisha.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Bill of quantities

9 priced items · ₹38.12 L (₹38,12,473)

Download BOQ file

Major components

Share of BOQ amount, grouped by item description

Road & bituminous work52%₹19.79 L
Concrete & RCC46%₹17.58 L
Earthwork & excavation0%₹1.4K
Other items2%₹74.5K

Largest items

By amount

Providind and laying "BITUMINOUS MACADAM" with hot mix plant using crushed aggregates of specified grading pr…Item 6 · 170.94 cum₹17.73 L
Providing and laying semi dense bituminous concrete with batch type hot mix plant using crushed aggregates of…Item 7 · 81.4 cum₹11.53 L
C.C. work of M25 grade with 20 mm down graded chips (C.B.) including hoisting & layingItem 4 · 91.35 cum₹5.98 L
Providing and applying primer coat with bitumen emulsion on prepared surface of granular base including clean…Item 5 · 3,256 sqm₹2.05 L
Providing and laying of hot applied thermoplastic compound 2.5mm thick including rafleat rising glass beads @…Item 8 · 110 sqm₹39.9K

Tender details

Tender reference: BMC-EE-Tender Cell-85/2026-27 dt. 23.10.2026
Tender ID: 2026_ORULB_144315_3
District: Khordha
Location: BMC AREA
Tender type: Open Tender
Tender category: Works
Period of work: 75 days

Show all 9 fields

Product category: Civil Works - Roads
Pincode: 751022

Authority

State
Government of Odisha
Department
Municipal Bodies
Body
Bhubaneswar Municipal Corporation
Inviting authority
Executive Engineer (Central Tender Cell)

All Municipal Bodies tenders in Khordha →

Costs

Estimated value: ₹38,12,473; ₹38.12 lakh
EMD / bid security: ₹38,200; Exemption available for eligible bidders
Tender fee: ₹6,000; Cost of bid document

Bid validity: 120 days

Security & deductions from the DTCN (7)

SC/ST contractors up to 'B' Class are eligible for Security Deposit (EMD, Initial Security, Performance Security) at half the usual rate.
Each bidder must furnish EMD @ 1% of the Estimated Cost put to tender, submitted online.
Initial Security Deposit (ISD) of not less than 2% of the accepted tender value must be furnished within 7 days of Letter of Acceptance (LoA).
Additional Performance Security (APS) will be obtained incrementally if the accepted bid price is lower than the Cost Put to Tender, calculated based on the 'Rounding Off of Percentage Less (ROPL)'.
APS must be deposited within 7 days from the date of communication to the bidder.
5% of each bill amount payable to the contractor will be withheld towards performance security.
The contractor shall not subcontract/sublet the work; violation will lead to rescission of contract and forfeiture of EMD, ISD, and penalty.

Source: Original DTCN

Frequently asked questions

About this tender

Eligibility & bid requirements

DTCN analysed38 requirements extracted14 documents identifiedExtracted from the official tender document

Eligibility

4 items

Contractors must be registered with Odisha State Government or equivalent grade/class registered with Central Government/any other State Government/MES/Railways.
Bidders must possess an up-to-date compatible Digital Signature Certificate.
Contractors registered elsewhere but not with Government of Odisha must register with the appropriate State Government authority before award of work/signing of agreement.

Show 1 more

Bidders must not have applied for/be undergoing Corporate Debt Restructuring (CDR)/Strategic Debt Restructuring (SDR), facing recovery proceedings from Financial Institutions, or declared 'Sick'/'under consideration as 'Sick' by BIFR.

Source: Original DTCNView source document

Experience

2 items

Each intending bidder (unless a Civil Engineer Contractor) declared as a successful bidder must deploy at least one experienced Civil Engineer at the work site for the full time during execution.
The deployed Civil Engineer must have a Diploma or Degree in Civil Engineering from an AICTE recognized institute and at least two years of post-qualification experience in civil engineering survey, monitoring, quality control, or construction works.

Source: Original DTCNView source document

Financial

7 items

SC/ST contractors up to 'B' Class are eligible for Security Deposit (EMD, Initial Security, Performance Security) at half the usual rate.
Each bidder must furnish EMD @ 1% of the Estimated Cost put to tender, submitted online.
Initial Security Deposit (ISD) of not less than 2% of the accepted tender value must be furnished within 7 days of Letter of Acceptance (LoA).

Show 4 more

Additional Performance Security (APS) will be obtained incrementally if the accepted bid price is lower than the Cost Put to Tender, calculated based on the 'Rounding Off of Percentage Less (ROPL)'.
APS must be deposited within 7 days from the date of communication to the bidder.
5% of each bill amount payable to the contractor will be withheld towards performance security.
The contractor shall not subcontract/sublet the work; violation will lead to rescission of contract and forfeiture of EMD, ISD, and penalty.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

14 items

Bidders must be in possession of or have a lease/hire agreement for tools, plants, equipment, and machineries as per Schedule-A of the DTCN.
Successful bidders (unless Civil Engineer Contractors) must deploy a Civil Engineer with a Diploma/Degree from an AICTE recognized institute and at least two years of post-qualification experience.
Bidders must ensure possession or lease/hire of tools, plants, equipment, and machineries as per Schedule-A.

Show 11 more

The contractor shall conduct all required tests on materials as directed by the Engineer-in-Charge, including specific tests for paver blocks, concrete roads, asphalt roads, and sub-base materials.
Quality certificates from manufacturers are required for paver blocks/kerb stones for each consignment.
For concrete roads, slump cone tests, compressive strength tests (7 & 28 days), core cutting tests, and sieve analysis of coarse aggregates (for PCC) are required.
For Ready Mix Concrete, a test certificate detailing mix proportions, cement type, admixtures, and concrete grade is required.
For asphalt roads, quality and grade certificates for bitumen, bitumen content tests, temperature tests of bitumen mixed aggregate, and core tests for density and thickness are required.
For sub-base, compaction/density tests, sieve analysis of coarse aggregate, and CBR or Los Angeles Abrasion Tests are required.
The contractor shall provide all materials required for the work, conforming to relevant latest BIS specifications and Codes of Practices.
The contractor shall provide suitable scaffolding, working platforms, gangways, stairways, and safe means of access for workmen.
Adequate precautions against electrical equipment and fire must be taken at the work site.
Personal safety equipment must be adequately available and properly used by persons employed at the site.
Qualified and experienced Resident Engineer(s) and Assistant(s) must be engaged for the work to the satisfaction of BMC.

Source: Original DTCNView source document

Contract conditions

11 items

The period of completion ranges from 45 to 150 Calendar Days.
Bids must be submitted online by 05:00 P.M. of 10.11.2026.
Technical and Financial Bids will be opened on 11.11.2026 (11:00 A.M. onwards).

Show 8 more

The successful bidder must submit a work programme and sign the agreement within 7 days from the date of LoA.
If the % rate quoted by any bidder is lower than or equal to 15% less (-), such bid shall be rejected.
Each received bid shall remain valid for a period of 120 days from the date of opening.
A penalty for delay in execution will be computed @1.50% per month on a per-day basis, not exceeding 10% of the Tendered Value of work.
The contractor shall bear all Taxes, Duties, Levies, Cess, Entry Tax, Income Tax, Royalties, Fair Weather Charges, and Tollages.
The contractor shall pay fair wages to all laborers as prescribed by the State Public Works Department or Minimum Wages Act 1948, whichever is higher.
The contractor shall indemnify BMC against all claims for injuries or damages to any person/property arising from negligence or fault of the contractor.
For legal disputes, the jurisdiction shall be within the State of Odisha.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Costs

Estimated value

₹38,12,473

₹38.12 lakh

EMD / bid security

₹38,200

Exemption available for eligible bidders

Tender fee

₹6,000

Cost of bid document

Bid validity: 120 days

Security & deductions from the DTCN (7)

SC/ST contractors up to 'B' Class are eligible for Security Deposit (EMD, Initial Security, Performance Security) at half the usual rate.
Each bidder must furnish EMD @ 1% of the Estimated Cost put to tender, submitted online.
Initial Security Deposit (ISD) of not less than 2% of the accepted tender value must be furnished within 7 days of Letter of Acceptance (LoA).
Additional Performance Security (APS) will be obtained incrementally if the accepted bid price is lower than the Cost Put to Tender, calculated based on the 'Rounding Off of Percentage Less (ROPL)'.
APS must be deposited within 7 days from the date of communication to the bidder.
5% of each bill amount payable to the contractor will be withheld towards performance security.
The contractor shall not subcontract/sublet the work; violation will lead to rescission of contract and forfeiture of EMD, ISD, and penalty.

Source: Original DTCN

Frequently asked questions

Improvement of Road from Plot No. 687 to Plot No. 128, Plot No. 13 to 8(C) Jayadurga Nagar in Ward No. 33

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

Improvement of Road from Plot No. 687 to Plot No. 128, Plot No. 13 to 8(C) Jayadurga Nagar in Ward No. 33

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more