What is the last date to bid for this tender?

Bids must be submitted on the Odisha eProcurement portal (tendersodisha.gov.in) by 30 Oct 2026, 05:00 PM. Bids are scheduled to open on 31 Oct 2026, 11:00 AM.

What is the estimated value of this tender?

The estimated tender value is ₹21.18 L (₹21,18,386).

How much EMD is required?

The EMD (bid security) is ₹21.2K (₹21,200). The portal lists EMD exemption as available for eligible bidders — check the DTCN for who qualifies.

Who can bid for this tender?

The DTCN states: Contractor must be of 'D', 'C', or 'B' Class as indicated against each work in the DTCN; Contractor must be registered with Odisha State Government or equivalent grade/class registered with Central Government/any other State Government/MES/Railways.

What work experience is required?

As extracted from the DTCN: Each intending bidder (unless a Civil Engineer Contractor) must deploy at least one experienced Civil Engineer at the work site for the full time during layout and execution of the work; The Civil Engineer must have a Diploma or Degree in Civil Engineering from an AICTE recognized institute and at least two years of post-qualification experience in civil engineering survey, monitoring/quality control, or construction works.

What is the completion period?

The period of work is 75 days, and bids must remain valid for 120 days.

Which department issued this tender?

This tender was issued by Municipal Bodies, Bhubaneswar Municipal Corporation; the tender inviting authority is the Executive Engineer (Central Tender Cell).

What documents are required to submit a bid?

The DTCN lists 20 documents, including Cost of Bid Document (Online remittance), Earnest Money Deposit (EMD) @ 1% of Estimated Cost (Online remittance), Valid Registration Certificate (License), Valid GST Registration Certificate & GSTIN, PAN Card, No Relationship Certificate (Non-Judicial Stamp Paper), and 14 more.

RoadClosed

Improvement of Road from Konark Tailor Road to Plot No. 131 in Ward No. 34

BMC AREA, Khordha Municipal BodiesBhubaneswar Municipal Corporation

Tender ID 2026_ORULB_143600_6Ref BMC-EE-Tender Cell-82/2026-27 dt. 13.10.2026

Estimated value: ₹21.18 L
EMD: ₹21.2K; Exemption available
Tender fee: ₹6.0K
Work period: 75 days

Bid submission

Closed

Closed on 30 Oct 2026, 05:00 PM

Bid submission for this tender has closed. Browse closed tenders in the archive →

About this tender

Municipal Bodies has invited bids for “Improvement of Road from Konark Tailor Road to Plot No. 131 in Ward No. 34” in BMC AREA, Khordha district, Odisha. The estimated tender value is ₹21.18 lakh and the completion period is 75 days. Bids must be submitted by 30 Oct 2026, 05:00 PM.

Bid readiness

Based on the tender, not your profile

Not available: Bid submission has closed
Done: BOQ available · 7 items
Done: DTCN analysed · 46 requirements extracted
Done: 20 required documents identified
Needs review: Experience requirement needs review
Needs review: Financial requirements need review

Review requirements

Important dates

All times IST, as published on the portal

Published17 Oct 2026, 10:30 AM
Document downloadUntil 30 Oct 2026
Submission deadline30 Oct 2026, 05:00 PM
Bid opening31 Oct 2026, 11:00 AM

Tender intelligence

Eligibility & bid requirements

DTCN analysed46 requirements extracted20 documents identifiedExtracted from the official tender document

Bhubaneswar Municipal Corporation invites percentage rate bids for 28 civil construction/repair works, with estimated costs ranging from Rs. 8.47 Lakhs to Rs. 46.60 Lakhs. The works are open to 'D', 'C', and 'B' class contractors registered with the Odisha State Government or equivalent. Bidders must submit their bids online via www.tendersodisha.gov.in by October 30, 2026, at 5:00 P.M.

Eligibility

5 items

Contractor must be of 'D', 'C', or 'B' Class as indicated against each work in the DTCN.
Contractor must be registered with Odisha State Government or equivalent grade/class registered with Central Government/any other State Government/MES/Railways.
Contractors registered elsewhere but not with Government of Odisha must register with the appropriate registering authority of the State Government before award of work/signing of the Agreement.

Show 2 more

Bidders must possess an up-to-date compatible Digital Signature Certificate.
Bidders must not be undergoing Corporate Debt Restructuring (CDR)/Strategic Debt Restructuring (SDR), facing recovery proceedings from Financial Institutions, or declared 'Sick' by BIFR.

Source: Original DTCNView source document

Experience

2 items

Each intending bidder (unless a Civil Engineer Contractor) must deploy at least one experienced Civil Engineer at the work site for the full time during layout and execution of the work.
The Civil Engineer must have a Diploma or Degree in Civil Engineering from an AICTE recognized institute and at least two years of post-qualification experience in civil engineering survey, monitoring/quality control, or construction works.

Source: Original DTCNView source document

Financial

7 items

SC and ST Category Contractors up to 'B' Class may deposit Security Deposit (EMD, initial security, and Performance Security) at half the usual rate.
Each intending bidder must furnish EMD @ 1% of the Estimated Cost, submitted online.
The successful bidder must furnish Initial Security Deposit (ISD) amounting to not less than 2% of the accepted value of the tender within 7 days from the date of issue of Letter of Acceptance (LoA).

Show 4 more

Additional Performance Security (APS) is required if the accepted bid price is lower than the Cost Put to Tender, calculated incrementally based on the percentage difference.
The successful bidder must deposit the APS amount within 7 days from the date of communication.
Failure to submit APS, Performance Security, and sign the agreement within the prescribed time will lead to cancellation of LoA and other actions.
5% of each bill amount will be withheld by BMC towards performance security.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

17 items

Bidders must possess or have a lease/hire agreement for tools, plants, equipment, and machinery as per Schedule-A of the DTCN.
Deployment of at least one experienced Civil Engineer at the work site for the full time during the course of lay out and execution of the work (for non-Civil Engineer Contractors).
The deployed Civil Engineer must have a Diploma or Degree in Civil Engineering from an AICTE recognized institute.

Show 14 more

The deployed Civil Engineer must have at least two years of post-qualification experience in Civil Engineering survey, monitoring and quality control of Civil Engineering works, or civil engineering construction works with quantity measurements, or a combination thereof.
Possession or lease/hire agreement for tools, plants, equipment, and machineries as per Schedule-A of the DTCN.
Quality certificates for paver blocks/kerb stones/blocks must be provided by the manufacturer for each consignment.
For concrete roads, slump cone test, compressive strength test (7 & 28 days), core cutting test, and sieve analysis of coarse aggregates (for PCC) are required.
For Ready Mix Concrete, a test certificate featuring mix proportions, cement type/make, plasticizer/admixture details, and concrete grade is required for each project.
For asphalt roads, quality and grade of Bitumen certificate from Hot Mix Plant, bitumen content test, temperature test of bitumen mixed aggregate, and core test for density and thickness are required.
For Sub-base, compaction/density test, sieve analysis of coarse aggregate, and CBR or Los Angeles Abrasion Test are required.
The contractor shall conduct all required tests on materials as directed by the Engineer-in-Charge.
The contractor shall provide all materials required for the work, conforming to relevant latest editions of BIS specifications and Codes of Practices.
The contractor must provide suitable scaffolding, working platforms, gangways, and stairways for workmen, ensuring safety and proper guarding where height exceeds 3.25 meters.
Adequate precautions must be taken against electrical equipment and fire.
The contractor must provide all necessary fencing and light to protect the public from accident.
All personal safety equipment must be adequately available and maintained for use by persons employed at the work site.
The contractor shall engage qualified and experienced Resident Engineer(s) and Assistant(s) to the satisfaction of BMC.

Source: Original DTCNView source document

Contract conditions

15 items

The period of completion ranges from 60 to 180 Calendar Days.
The last date for online bid submission is October 30, 2026, at 05:00 P.M.
The bid shall remain valid for a period of 120 days from the date of opening.

Show 12 more

If the percentage rate quoted by any bidder is lower than or equal to 15% less than the estimated cost, such bid shall be rejected.
The successful bidder must submit a work programme and sign the agreement within 7 days from the date of issue of LoA.
The contractor shall bear all Taxes, Duties, Levies, Cess, Entry Tax, Income Tax, Royalties, Fair Weather Charges, and Tollages.
No payment shall be made for preparatory/facilitating works.
The contractor shall be responsible for safe custody of materials at work sites.
The contractor shall not subcontract/sublet the work.
Penalty for delay in execution is 1.50% per month on a per-day basis, not exceeding 10% of the Tendered Value of work.
If any work is executed with unsound, imperfect, or unskilful workmanship or inferior materials, the contractor must rectify/remove/dismantle and rebuild/reconstruct it.
A contractor may be blacklisted for misbehavior, tender fixing, non-achievement of milestones, violation of contract conditions, jeopardizing state security, or submitting false documents.
The jurisdiction for legal disputes shall be within the State of Odisha.
The contractor must apply for extension of time within 30 days of the hindrance.
BMC reserves the right to reject any or all bids without assigning reasons, subject to CVC and State Regulatory Authorities limitations.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Bill of quantities

7 priced items · ₹21.18 L (₹21,18,386)

Download BOQ file

Major components

Share of BOQ amount, grouped by item description

Concrete & RCC87%₹18.49 L
Earthwork & excavation2%₹33.4K
Other items11%₹2.36 L

Largest items

By amount

R.C.C work of M25 Grade with 25mm size and down graded black hard granite crusher broken chips including cost…Item 6 · 155.4 Cum₹9.64 L
P.C.C (1:4:8) using 40mm size black hard crusher broken metals with all cost, convency, royalty etc and compl…Item 4 · 155.4 Cum₹8.74 L
Removing and dismentlling cementCement concret includingstacking in the Useful materals Etc Comp.Item 1 · 217.56 Cum₹1.87 L
Supplying and filling of sand to the foundation bed of column pit, wall foundation and inside the filling wit…Item 3 · 77.7 Cum₹45.8K
Earth work excavation in Hard soil using one cum Bucket Hydraulic Excavator with all leads and lifts and tran…Item 2 · 159.1 Cum₹33.4K

Tender details

Tender reference: BMC-EE-Tender Cell-82/2026-27 dt. 13.10.2026
Tender ID: 2026_ORULB_143600_6
District: Khordha
Location: BMC AREA
Tender type: Open Tender
Tender category: Works
Period of work: 75 days

Show all 9 fields

Product category: Civil Works - Roads
Pincode: 751022

Authority

State
Government of Odisha
Department
Municipal Bodies
Body
Bhubaneswar Municipal Corporation
Inviting authority
Executive Engineer (Central Tender Cell)

All Municipal Bodies tenders in Khordha →

Costs

Estimated value: ₹21,18,386; ₹21.18 lakh
EMD / bid security: ₹21,200; Exemption available for eligible bidders
Tender fee: ₹6,000; Cost of bid document

Bid validity: 120 days

Security & deductions from the DTCN (7)

SC and ST Category Contractors up to 'B' Class may deposit Security Deposit (EMD, initial security, and Performance Security) at half the usual rate.
Each intending bidder must furnish EMD @ 1% of the Estimated Cost, submitted online.
The successful bidder must furnish Initial Security Deposit (ISD) amounting to not less than 2% of the accepted value of the tender within 7 days from the date of issue of Letter of Acceptance (LoA).
Additional Performance Security (APS) is required if the accepted bid price is lower than the Cost Put to Tender, calculated incrementally based on the percentage difference.
The successful bidder must deposit the APS amount within 7 days from the date of communication.
Failure to submit APS, Performance Security, and sign the agreement within the prescribed time will lead to cancellation of LoA and other actions.
5% of each bill amount will be withheld by BMC towards performance security.

Source: Original DTCN

Frequently asked questions

Eligibility & bid requirements

DTCN analysed46 requirements extracted20 documents identifiedExtracted from the official tender document

Eligibility

5 items

Contractor must be of 'D', 'C', or 'B' Class as indicated against each work in the DTCN.
Contractor must be registered with Odisha State Government or equivalent grade/class registered with Central Government/any other State Government/MES/Railways.
Contractors registered elsewhere but not with Government of Odisha must register with the appropriate registering authority of the State Government before award of work/signing of the Agreement.

Show 2 more

Bidders must possess an up-to-date compatible Digital Signature Certificate.
Bidders must not be undergoing Corporate Debt Restructuring (CDR)/Strategic Debt Restructuring (SDR), facing recovery proceedings from Financial Institutions, or declared 'Sick' by BIFR.

Source: Original DTCNView source document

Experience

2 items

Each intending bidder (unless a Civil Engineer Contractor) must deploy at least one experienced Civil Engineer at the work site for the full time during layout and execution of the work.
The Civil Engineer must have a Diploma or Degree in Civil Engineering from an AICTE recognized institute and at least two years of post-qualification experience in civil engineering survey, monitoring/quality control, or construction works.

Source: Original DTCNView source document

Financial

7 items

SC and ST Category Contractors up to 'B' Class may deposit Security Deposit (EMD, initial security, and Performance Security) at half the usual rate.
Each intending bidder must furnish EMD @ 1% of the Estimated Cost, submitted online.
The successful bidder must furnish Initial Security Deposit (ISD) amounting to not less than 2% of the accepted value of the tender within 7 days from the date of issue of Letter of Acceptance (LoA).

Show 4 more

Additional Performance Security (APS) is required if the accepted bid price is lower than the Cost Put to Tender, calculated incrementally based on the percentage difference.
The successful bidder must deposit the APS amount within 7 days from the date of communication.
Failure to submit APS, Performance Security, and sign the agreement within the prescribed time will lead to cancellation of LoA and other actions.
5% of each bill amount will be withheld by BMC towards performance security.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

17 items

Bidders must possess or have a lease/hire agreement for tools, plants, equipment, and machinery as per Schedule-A of the DTCN.
Deployment of at least one experienced Civil Engineer at the work site for the full time during the course of lay out and execution of the work (for non-Civil Engineer Contractors).
The deployed Civil Engineer must have a Diploma or Degree in Civil Engineering from an AICTE recognized institute.

Show 14 more

The deployed Civil Engineer must have at least two years of post-qualification experience in Civil Engineering survey, monitoring and quality control of Civil Engineering works, or civil engineering construction works with quantity measurements, or a combination thereof.
Possession or lease/hire agreement for tools, plants, equipment, and machineries as per Schedule-A of the DTCN.
Quality certificates for paver blocks/kerb stones/blocks must be provided by the manufacturer for each consignment.
For concrete roads, slump cone test, compressive strength test (7 & 28 days), core cutting test, and sieve analysis of coarse aggregates (for PCC) are required.
For Ready Mix Concrete, a test certificate featuring mix proportions, cement type/make, plasticizer/admixture details, and concrete grade is required for each project.
For asphalt roads, quality and grade of Bitumen certificate from Hot Mix Plant, bitumen content test, temperature test of bitumen mixed aggregate, and core test for density and thickness are required.
For Sub-base, compaction/density test, sieve analysis of coarse aggregate, and CBR or Los Angeles Abrasion Test are required.
The contractor shall conduct all required tests on materials as directed by the Engineer-in-Charge.
The contractor shall provide all materials required for the work, conforming to relevant latest editions of BIS specifications and Codes of Practices.
The contractor must provide suitable scaffolding, working platforms, gangways, and stairways for workmen, ensuring safety and proper guarding where height exceeds 3.25 meters.
Adequate precautions must be taken against electrical equipment and fire.
The contractor must provide all necessary fencing and light to protect the public from accident.
All personal safety equipment must be adequately available and maintained for use by persons employed at the work site.
The contractor shall engage qualified and experienced Resident Engineer(s) and Assistant(s) to the satisfaction of BMC.

Source: Original DTCNView source document

Contract conditions

15 items

The period of completion ranges from 60 to 180 Calendar Days.
The last date for online bid submission is October 30, 2026, at 05:00 P.M.
The bid shall remain valid for a period of 120 days from the date of opening.

Show 12 more

If the percentage rate quoted by any bidder is lower than or equal to 15% less than the estimated cost, such bid shall be rejected.
The successful bidder must submit a work programme and sign the agreement within 7 days from the date of issue of LoA.
The contractor shall bear all Taxes, Duties, Levies, Cess, Entry Tax, Income Tax, Royalties, Fair Weather Charges, and Tollages.
No payment shall be made for preparatory/facilitating works.
The contractor shall be responsible for safe custody of materials at work sites.
The contractor shall not subcontract/sublet the work.
Penalty for delay in execution is 1.50% per month on a per-day basis, not exceeding 10% of the Tendered Value of work.
If any work is executed with unsound, imperfect, or unskilful workmanship or inferior materials, the contractor must rectify/remove/dismantle and rebuild/reconstruct it.
A contractor may be blacklisted for misbehavior, tender fixing, non-achievement of milestones, violation of contract conditions, jeopardizing state security, or submitting false documents.
The jurisdiction for legal disputes shall be within the State of Odisha.
The contractor must apply for extension of time within 30 days of the hindrance.
BMC reserves the right to reject any or all bids without assigning reasons, subject to CVC and State Regulatory Authorities limitations.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Costs

Estimated value

₹21,18,386

₹21.18 lakh

EMD / bid security

₹21,200

Exemption available for eligible bidders

Tender fee

₹6,000

Cost of bid document

Bid validity: 120 days

Security & deductions from the DTCN (7)

SC and ST Category Contractors up to 'B' Class may deposit Security Deposit (EMD, initial security, and Performance Security) at half the usual rate.
Each intending bidder must furnish EMD @ 1% of the Estimated Cost, submitted online.
The successful bidder must furnish Initial Security Deposit (ISD) amounting to not less than 2% of the accepted value of the tender within 7 days from the date of issue of Letter of Acceptance (LoA).
Additional Performance Security (APS) is required if the accepted bid price is lower than the Cost Put to Tender, calculated incrementally based on the percentage difference.
The successful bidder must deposit the APS amount within 7 days from the date of communication.
Failure to submit APS, Performance Security, and sign the agreement within the prescribed time will lead to cancellation of LoA and other actions.
5% of each bill amount will be withheld by BMC towards performance security.

Source: Original DTCN

Frequently asked questions

Improvement of Road from Konark Tailor Road to Plot No. 131 in Ward No. 34

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

Improvement of Road from Konark Tailor Road to Plot No. 131 in Ward No. 34

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more