What is the last date to bid for this tender?

Bids must be submitted on the Odisha eProcurement portal (tendersodisha.gov.in) by 30 Oct 2026, 05:00 PM. Bids are scheduled to open on 31 Oct 2026, 11:00 AM.

What is the estimated value of this tender?

The estimated tender value is ₹33.89 L (₹33,88,951).

How much EMD is required?

The EMD (bid security) is ₹33.9K (₹33,900). The portal lists EMD exemption as available for eligible bidders — check the DTCN for who qualifies.

Who can bid for this tender?

The DTCN states: Contractors must be registered as 'D', 'C', or 'B' Class (as specified for each work) with the Odisha State Government, or equivalent grade/class with Central Government/any other State Government/MES/Railways; Contractors registered elsewhere must register with the appropriate registering authority of the State Government before award of work/signing of the Agreement.

What work experience is required?

As extracted from the DTCN: Non-Civil Engineer Contractors must deploy at least one experienced Civil Engineer at the work site with a Diploma or Degree in Civil Engineering from an AICTE recognized institute and at least two years of post-qualification experience.

What is the completion period?

The period of work is 90 days, and bids must remain valid for 120 days.

Which department issued this tender?

This tender was issued by Municipal Bodies, Bhubaneswar Municipal Corporation; the tender inviting authority is the Executive Engineer (Central Tender Cell).

What documents are required to submit a bid?

The DTCN lists 14 documents, including Cost of Bid Document (Online remittance), Earnest Money Deposit (EMD) (Online remittance), Valid Registration Certificate, Valid GST Registration Certificate & GSTIN, PAN Card, No Relationship Certificate (Non-Judicial Stamp Paper), and 8 more.

RoadClosed

Improvement of road from Colony School to Kandha Sahi in Ward No. 48

BMC AREA, Khordha Municipal BodiesBhubaneswar Municipal Corporation

Tender ID 2026_ORULB_143600_16Ref BMC-EE-Tender Cell-82/2026-27 dt. 13.10.2026

Estimated value: ₹33.89 L
EMD: ₹33.9K; Exemption available
Tender fee: ₹6.0K
Work period: 90 days

Bid submission

Closed

Closed on 30 Oct 2026, 05:00 PM

Bid submission for this tender has closed. Browse closed tenders in the archive →

About this tender

Municipal Bodies has invited bids for “Improvement of road from Colony School to Kandha Sahi in Ward No. 48” in BMC AREA, Khordha district, Odisha. The estimated tender value is ₹33.89 lakh and the completion period is 90 days. Bids must be submitted by 30 Oct 2026, 05:00 PM.

Bid readiness

Based on the tender, not your profile

Not available: Bid submission has closed
Done: BOQ available · 9 items
Done: DTCN analysed · 47 requirements extracted
Done: 14 required documents identified
Needs review: Experience requirement needs review
Needs review: Financial requirements need review

Review requirements

Important dates

All times IST, as published on the portal

Published17 Oct 2026, 10:30 AM
Document downloadUntil 30 Oct 2026
Submission deadline30 Oct 2026, 05:00 PM
Bid opening31 Oct 2026, 11:00 AM

Tender intelligence

Eligibility & bid requirements

DTCN analysed47 requirements extracted14 documents identifiedExtracted from the official tender document

The Bhubaneswar Municipal Corporation invites bids for 28 civil construction and repair works, with estimated costs ranging from Rs. 8.47 Lakhs to Rs. 46.60 Lakhs. The works have completion periods between 60 and 180 calendar days. Eligible contractors must be registered as 'D', 'C', or 'B' Class with the Odisha State Government or equivalent, and must submit an Earnest Money Deposit (EMD) of 1% of the estimated cost.

Eligibility

5 items

Contractors must be registered as 'D', 'C', or 'B' Class (as specified for each work) with the Odisha State Government, or equivalent grade/class with Central Government/any other State Government/MES/Railways.
Contractors registered elsewhere must register with the appropriate registering authority of the State Government before award of work/signing of the Agreement.
Bidders must possess an up-to-date compatible Digital Signature Certificate.

Show 2 more

Bidders must not be undergoing Corporate Debt Restructuring (CDR)/Strategic Debt Restructuring (SDR), facing recovery proceedings from Financial Institutions, or declared 'Sick' by BIFR.
Bidders must submit self-attested copies of valid GST Clearance Certificates.

Source: Original DTCNView source document

Experience

1 item

Non-Civil Engineer Contractors must deploy at least one experienced Civil Engineer at the work site with a Diploma or Degree in Civil Engineering from an AICTE recognized institute and at least two years of post-qualification experience.

Source: Original DTCNView source document

Financial

8 items

SC/ST contractors up to 'B' Class are eligible for 50% concession on registration fees and 50% concession on Security Deposit (EMD, Initial Security, Performance Security).
Each intending bidder is required to furnish EMD @ 1% of the Estimated Cost.
The successful bidder must furnish an Initial Security Deposit (ISD) of not less than 2% of the accepted value within 7 days from the Letter of Acceptance (LoA) date.

Show 5 more

Additional Performance Security (APS) is required if the accepted bid price is lower than the Cost Put to Tender, calculated incrementally based on the percentage difference.
The APS must be deposited within 7 days from the date of communication to the bidder.
The EMD of unsuccessful bidders (except the 2nd lowest) will be refunded within 30 days after opening of Financial Bids.
5% of each bill amount will be withheld by BMC towards performance security.
BMC reserves the right to rescind the contract and forfeit ISD, SD, and APS, and realize 20% of the value of the leftover work as penalty for various breaches, including non-compliance with rectification notices or suspension of work.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

16 items

Bidders must be in possession of or have a lease/hire agreement for tools, plants, equipment, and machineries as per Schedule-A.
Successful bidders (unless a Civil Engineer Contractor) must deploy at least one experienced Civil Engineer at the work site for the full time during layout and execution of the work.
The Civil Engineer must hold a Diploma or Degree in Civil Engineering from an AICTE recognized institute.

Show 13 more

The Civil Engineer must have at least two years of post-qualification experience in Civil Engineering survey, monitoring and quality control, or construction works with quantity measurements, or a combination thereof.
Bidders must ensure they have or can acquire the tools, plants, equipment, and machineries listed in Schedule-A.
For paver blocks/kerb stones, quality certificates from the manufacturer for each consignment are required.
For concrete roads, slump cone test, compressive strength test (7 & 28 days), core cutting test, and sieve analysis of coarse aggregates (for PCC) are required.
For Ready Mix Concrete, a test certificate detailing mix proportions, cement type, admixture details, and concrete grade is required for each project.
For asphalt roads, quality and grade of bitumen certificate, bitumen content test, temperature test of bitumen mixed aggregate, and core test for density and thickness are required.
For sub-base, compaction/density test, sieve analysis of coarse aggregate, and CBR or Los Angeles Abrasion Test are required.
The contractor shall provide all materials required for the work, conforming to relevant latest BIS specifications and Codes of Practices.
The contractor must provide suitable scaffolding, working platforms, gangways, and stairways for safe working conditions.
The contractor must take adequate precautions against electrical equipment and fire.
The contractor must provide all necessary fencing and light to protect the public from accident.
The contractor must make adequately available all personal safety equipment for workers.
The contractor shall engage qualified and experienced Resident Engineer(s) and Assistant(s) to the satisfaction of BMC.

Source: Original DTCNView source document

Contract conditions

17 items

The period of completion ranges from 60 to 180 Calendar Days.
The bid document cost is Rs. 4000/- or Rs. 6000/- depending on the work.
The last date/time for submission of bids is 05:00 P.M. of 30.10.2026.

Show 14 more

Technical and Financial Bids will be opened on 31.10.2026 (11:00 A.M. onwards).
If the accepted bid price is lower than or equal to 15% less than the estimated cost, the bid shall be rejected.
If more than one bid is quoted at 14.99% less, the tender will be finalized through a transparent lottery system.
The successful bidder must submit a work program and sign the agreement within 7 days from the LoA date.
The bid shall remain valid for a period of 120 days from the date of opening.
The contractor shall bear all Taxes, Duties, Levies, Cess, Entry Tax, Income Tax, Royalties, Fair Weather Charges, and Tollages.
Penalty for delay in execution is 1.50% per month on a per-day basis, not exceeding 10% of the Tendered Value of work.
Contractors may be blacklisted for misbehavior, tender fixing, non-achievement of milestones, persistent violation of contract conditions, jeopardizing state security, or submitting false documents.
The contractor shall not subcontract/sublet the work.
No payment will be made for preparatory/facilitating works.
The contractor is responsible for safe custody of materials at work sites.
BMC has the right to test the quality of materials at any time at the contractor's cost.
The contractor is primarily liable for all payments to be made under and for the observance of labor regulations, including fair wages and workman compensation.
For legal disputes, the jurisdiction will be within the State of Odisha.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Bill of quantities

9 priced items · ₹33.89 L (₹33,88,951)

Download BOQ file

Major components

Share of BOQ amount, grouped by item description

Road & bituminous work58%₹19.64 L
Concrete & RCC36%₹12.06 L
Plaster, paint & finishing6%₹2.15 L
Earthwork & excavation0%₹1.7K
Other items0%₹3.0K

Largest items

By amount

Providind and laying "BITUMINOUS MACADAM" with hot mix plant using crushed aggregates of specified grading pr…Item 6 · 170.33 cum₹17.67 L
Providing and laying semi dense bituminous concrete with batch type hot mix plant using crushed aggregates of…Item 7 · 85.16 cum₹12.06 L
Labour for applying primer coatItem 5 · 3,406.5 sqm₹2.15 L
Labour for scrapping, cleaning the road surface applying tack coat using 3.00 Kg of bitumen for 10M2 and layi…Item 4 · 124.9 sqm₹95.2K
Road Marking with hot applied thermoplastic compound with refleat rising glass beads on bituminious surface e…Item 8 · 227.1 cum₹82.4K

Tender details

Tender reference: BMC-EE-Tender Cell-82/2026-27 dt. 13.10.2026
Tender ID: 2026_ORULB_143600_16
District: Khordha
Location: BMC AREA
Tender type: Open Tender
Tender category: Works
Period of work: 90 days

Show all 9 fields

Product category: Civil Works - Roads
Pincode: 751022

Authority

State
Government of Odisha
Department
Municipal Bodies
Body
Bhubaneswar Municipal Corporation
Inviting authority
Executive Engineer (Central Tender Cell)

All Municipal Bodies tenders in Khordha →

Costs

Estimated value: ₹33,88,951; ₹33.89 lakh
EMD / bid security: ₹33,900; Exemption available for eligible bidders
Tender fee: ₹6,000; Cost of bid document

Bid validity: 120 days

Security & deductions from the DTCN (8)

SC/ST contractors up to 'B' Class are eligible for 50% concession on registration fees and 50% concession on Security Deposit (EMD, Initial Security, Performance Security).
Each intending bidder is required to furnish EMD @ 1% of the Estimated Cost.
The successful bidder must furnish an Initial Security Deposit (ISD) of not less than 2% of the accepted value within 7 days from the Letter of Acceptance (LoA) date.
Additional Performance Security (APS) is required if the accepted bid price is lower than the Cost Put to Tender, calculated incrementally based on the percentage difference.
The APS must be deposited within 7 days from the date of communication to the bidder.
The EMD of unsuccessful bidders (except the 2nd lowest) will be refunded within 30 days after opening of Financial Bids.
5% of each bill amount will be withheld by BMC towards performance security.
BMC reserves the right to rescind the contract and forfeit ISD, SD, and APS, and realize 20% of the value of the leftover work as penalty for various breaches, including non-compliance with rectification notices or suspension of work.

Source: Original DTCN

Frequently asked questions

Eligibility & bid requirements

DTCN analysed47 requirements extracted14 documents identifiedExtracted from the official tender document

Eligibility

5 items

Contractors must be registered as 'D', 'C', or 'B' Class (as specified for each work) with the Odisha State Government, or equivalent grade/class with Central Government/any other State Government/MES/Railways.
Contractors registered elsewhere must register with the appropriate registering authority of the State Government before award of work/signing of the Agreement.
Bidders must possess an up-to-date compatible Digital Signature Certificate.

Show 2 more

Bidders must not be undergoing Corporate Debt Restructuring (CDR)/Strategic Debt Restructuring (SDR), facing recovery proceedings from Financial Institutions, or declared 'Sick' by BIFR.
Bidders must submit self-attested copies of valid GST Clearance Certificates.

Source: Original DTCNView source document

Experience

1 item

Non-Civil Engineer Contractors must deploy at least one experienced Civil Engineer at the work site with a Diploma or Degree in Civil Engineering from an AICTE recognized institute and at least two years of post-qualification experience.

Source: Original DTCNView source document

Financial

8 items

SC/ST contractors up to 'B' Class are eligible for 50% concession on registration fees and 50% concession on Security Deposit (EMD, Initial Security, Performance Security).
Each intending bidder is required to furnish EMD @ 1% of the Estimated Cost.
The successful bidder must furnish an Initial Security Deposit (ISD) of not less than 2% of the accepted value within 7 days from the Letter of Acceptance (LoA) date.

Show 5 more

Additional Performance Security (APS) is required if the accepted bid price is lower than the Cost Put to Tender, calculated incrementally based on the percentage difference.
The APS must be deposited within 7 days from the date of communication to the bidder.
The EMD of unsuccessful bidders (except the 2nd lowest) will be refunded within 30 days after opening of Financial Bids.
5% of each bill amount will be withheld by BMC towards performance security.
BMC reserves the right to rescind the contract and forfeit ISD, SD, and APS, and realize 20% of the value of the leftover work as penalty for various breaches, including non-compliance with rectification notices or suspension of work.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

16 items

Bidders must be in possession of or have a lease/hire agreement for tools, plants, equipment, and machineries as per Schedule-A.
Successful bidders (unless a Civil Engineer Contractor) must deploy at least one experienced Civil Engineer at the work site for the full time during layout and execution of the work.
The Civil Engineer must hold a Diploma or Degree in Civil Engineering from an AICTE recognized institute.

Show 13 more

The Civil Engineer must have at least two years of post-qualification experience in Civil Engineering survey, monitoring and quality control, or construction works with quantity measurements, or a combination thereof.
Bidders must ensure they have or can acquire the tools, plants, equipment, and machineries listed in Schedule-A.
For paver blocks/kerb stones, quality certificates from the manufacturer for each consignment are required.
For concrete roads, slump cone test, compressive strength test (7 & 28 days), core cutting test, and sieve analysis of coarse aggregates (for PCC) are required.
For Ready Mix Concrete, a test certificate detailing mix proportions, cement type, admixture details, and concrete grade is required for each project.
For asphalt roads, quality and grade of bitumen certificate, bitumen content test, temperature test of bitumen mixed aggregate, and core test for density and thickness are required.
For sub-base, compaction/density test, sieve analysis of coarse aggregate, and CBR or Los Angeles Abrasion Test are required.
The contractor shall provide all materials required for the work, conforming to relevant latest BIS specifications and Codes of Practices.
The contractor must provide suitable scaffolding, working platforms, gangways, and stairways for safe working conditions.
The contractor must take adequate precautions against electrical equipment and fire.
The contractor must provide all necessary fencing and light to protect the public from accident.
The contractor must make adequately available all personal safety equipment for workers.
The contractor shall engage qualified and experienced Resident Engineer(s) and Assistant(s) to the satisfaction of BMC.

Source: Original DTCNView source document

Contract conditions

17 items

The period of completion ranges from 60 to 180 Calendar Days.
The bid document cost is Rs. 4000/- or Rs. 6000/- depending on the work.
The last date/time for submission of bids is 05:00 P.M. of 30.10.2026.

Show 14 more

Technical and Financial Bids will be opened on 31.10.2026 (11:00 A.M. onwards).
If the accepted bid price is lower than or equal to 15% less than the estimated cost, the bid shall be rejected.
If more than one bid is quoted at 14.99% less, the tender will be finalized through a transparent lottery system.
The successful bidder must submit a work program and sign the agreement within 7 days from the LoA date.
The bid shall remain valid for a period of 120 days from the date of opening.
The contractor shall bear all Taxes, Duties, Levies, Cess, Entry Tax, Income Tax, Royalties, Fair Weather Charges, and Tollages.
Penalty for delay in execution is 1.50% per month on a per-day basis, not exceeding 10% of the Tendered Value of work.
Contractors may be blacklisted for misbehavior, tender fixing, non-achievement of milestones, persistent violation of contract conditions, jeopardizing state security, or submitting false documents.
The contractor shall not subcontract/sublet the work.
No payment will be made for preparatory/facilitating works.
The contractor is responsible for safe custody of materials at work sites.
BMC has the right to test the quality of materials at any time at the contractor's cost.
The contractor is primarily liable for all payments to be made under and for the observance of labor regulations, including fair wages and workman compensation.
For legal disputes, the jurisdiction will be within the State of Odisha.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Costs

Estimated value

₹33,88,951

₹33.89 lakh

EMD / bid security

₹33,900

Exemption available for eligible bidders

Tender fee

₹6,000

Cost of bid document

Bid validity: 120 days

Security & deductions from the DTCN (8)

SC/ST contractors up to 'B' Class are eligible for 50% concession on registration fees and 50% concession on Security Deposit (EMD, Initial Security, Performance Security).
Each intending bidder is required to furnish EMD @ 1% of the Estimated Cost.
The successful bidder must furnish an Initial Security Deposit (ISD) of not less than 2% of the accepted value within 7 days from the Letter of Acceptance (LoA) date.
Additional Performance Security (APS) is required if the accepted bid price is lower than the Cost Put to Tender, calculated incrementally based on the percentage difference.
The APS must be deposited within 7 days from the date of communication to the bidder.
The EMD of unsuccessful bidders (except the 2nd lowest) will be refunded within 30 days after opening of Financial Bids.
5% of each bill amount will be withheld by BMC towards performance security.
BMC reserves the right to rescind the contract and forfeit ISD, SD, and APS, and realize 20% of the value of the leftover work as penalty for various breaches, including non-compliance with rectification notices or suspension of work.

Source: Original DTCN

Frequently asked questions

Improvement of road from Colony School to Kandha Sahi in Ward No. 48

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

Improvement of road from Colony School to Kandha Sahi in Ward No. 48

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more