What is the last date to bid for this tender?

Bids must be submitted on the Odisha eProcurement portal (tendersodisha.gov.in) by 30 Oct 2026, 05:00 PM. Bids are scheduled to open on 31 Oct 2026, 11:00 AM.

What is the estimated value of this tender?

The estimated tender value is ₹46.60 L (₹46,60,427).

How much EMD is required?

The EMD (bid security) is ₹46.7K (₹46,700). The portal lists EMD exemption as available for eligible bidders — check the DTCN for who qualifies.

Who can bid for this tender?

The DTCN states: Bidders must be registered with the Odisha State Government or of equivalent grade/class registered with Central Government/ any other State Government/ MES/Railways; Bidders must possess an up-to-date compatible Digital Signature Certificate.

What work experience is required?

As extracted from the DTCN: Each intending bidder (unless a Civil Engineer Contractor) must deploy at least one experienced Civil Engineer at the work site for the full time during layout and execution; The Civil Engineer must have a Diploma or Degree in Civil Engineering from an AICTE-recognized institute and at least two years of post-qualification experience in civil engineering survey, monitoring, quality control, or construction.

What is the completion period?

The period of work is 150 days, and bids must remain valid for 120 days.

Which department issued this tender?

This tender was issued by Municipal Bodies, Bhubaneswar Municipal Corporation; the tender inviting authority is the Executive Engineer (Central Tender Cell).

What documents are required to submit a bid?

The DTCN lists 17 documents, including Cost of Bid Document (Online remittance), Earnest Money Deposit (EMD) @ 1% of Estimated Cost (Online remittance), Valid Registration Certificate, Valid GST Registration Certificate & GSTIN, PAN Card, No Relationship Certificate (Non-Judicial Stamp Paper), and 11 more.

RoadClosed

Development of Roads and drains at various locations in Ward No. 50

BMC AREA, Khordha Municipal BodiesBhubaneswar Municipal Corporation

Tender ID 2026_ORULB_143600_25Ref BMC-EE-Tender Cell-82/2026-27 dt. 13.10.2026

Estimated value: ₹46.60 L
EMD: ₹46.7K; Exemption available
Tender fee: ₹6.0K
Work period: 150 days

Bid submission

Closed

Closed on 30 Oct 2026, 05:00 PM

Bid submission for this tender has closed. Browse closed tenders in the archive →

About this tender

Municipal Bodies has invited bids for “Development of Roads and drains at various locations in Ward No. 50” in BMC AREA, Khordha district, Odisha. The estimated tender value is ₹46.60 lakh and the completion period is 150 days. Bids must be submitted by 30 Oct 2026, 05:00 PM.

Bid readiness

Based on the tender, not your profile

Not available: Bid submission has closed
Done: BOQ available · 12 items
Done: DTCN analysed · 45 requirements extracted
Done: 17 required documents identified
Needs review: Experience requirement needs review
Needs review: Financial requirements need review

Review requirements

Important dates

All times IST, as published on the portal

Published17 Oct 2026, 10:30 AM
Document downloadUntil 30 Oct 2026
Submission deadline30 Oct 2026, 05:00 PM
Bid opening31 Oct 2026, 11:00 AM

Tender intelligence

Eligibility & bid requirements

DTCN analysed45 requirements extracted17 documents identifiedExtracted from the official tender document

The Bhubaneswar Municipal Corporation invites bids for 28 civil construction and repair works, with estimated costs ranging from Rs. 8.47 Lakhs to Rs. 46.60 Lakhs. The projects require contractors of Class "D", "C", or "B" depending on the specific work, and completion periods vary from 60 to 180 calendar days. Bidders must submit online through www.tendersodisha.gov.in and fulfill specific eligibility criteria, including possessing a Digital Signature Certificate and submitting an Earnest Money Deposit (EMD) of 1% of the estimated cost.

Eligibility

5 items

Bidders must be registered with the Odisha State Government or of equivalent grade/class registered with Central Government/ any other State Government/ MES/Railways.
Bidders must possess an up-to-date compatible Digital Signature Certificate.
Contractors registered elsewhere but not with the Government of Odisha must register with the appropriate state authority before work award/agreement signing.

Show 2 more

Bidders undergoing Corporate Debt Restructuring (CDR)/Strategic Debt Restructuring (SDR), facing recovery proceedings from Financial Institutions, or declared 'Sick' by BIFR are not eligible.
SC and ST Category Contractors may avail 10% price preference as per Works Department Resolution No. 16262 dated 30.10.2018.

Source: Original DTCNView source document

Experience

2 items

Each intending bidder (unless a Civil Engineer Contractor) must deploy at least one experienced Civil Engineer at the work site for the full time during layout and execution.
The Civil Engineer must have a Diploma or Degree in Civil Engineering from an AICTE-recognized institute and at least two years of post-qualification experience in civil engineering survey, monitoring, quality control, or construction.

Source: Original DTCNView source document

Financial

11 items

SC/ST contractors up to 'B' Class may deposit Security Deposit (EMD, initial security, and Performance Security) at half the usual rate.
Each intending bidder must furnish EMD @ 1% of the Estimated Cost.
If the accepted bid price is lower than the Cost Put to Tender, Additional Performance Security (APS) will be required on an incremental basis.

Show 8 more

The successful bidder must deposit Initial Security Deposit (ISD) of not less than 2% of the accepted value within 7 days of the Letter of Acceptance (LoA).
The successful bidder must submit the APS amount within 7 days from the date of communication.
The BG for APS should remain valid at least till one month after expiry of the stipulated date of completion and Defect Liability Period.
The BG for Performance Security should remain valid till three years after expiry of the duration for completion of the work.
Failure to submit APS, Performance Security, and sign the agreement within the prescribed time will lead to cancellation of LoA and other actions.
5% of each bill amount will be withheld by BMC towards performance security.
In case of contract rescission, ISD, SD, and APS will be forfeited, and 20% of the value of the leftover work will be realized as penalty.
The contractor shall not subcontract/sublet the work; doing so will result in rescission of the contract and forfeiture of EMD, ISD, and penalty.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

10 items

Bidders must be in possession of or have a lease/hire agreement for tools, plants, equipment, and machinery as per Schedule-A.
The successful bidder must deploy at least one experienced Civil Engineer at the work site with a Diploma or Degree in Civil Engineering and at least two years of post-qualification experience.
Bidders must possess or have lease/hire agreements for tools, plants, equipment, and machinery as per Schedule-A.

Show 7 more

The contractor shall provide all materials required for the work, conforming to relevant latest editions of BIS specifications and Codes of Practices.
The contractor must facilitate quality tests through Government or Government authorized laboratories, coordinating sample collection, preservation, and testing.
Specific tests are required for paver blocks/kerb stones, concrete roads (slump cone, compressive strength, core cutting, sieve analysis), asphalt roads (bitumen quality/grade, bitumen content, temperature, core test), and sub-base (compaction, sieve analysis, CBR/Los Angeles Abrasion Test).
The contractor must provide suitable scaffolding, working platforms, gangways, stairways, safe means of access, and take precautions against electrical equipment and fire.
The contractor must provide all necessary fencing and light to protect the public from accident.
All personal safety equipment must be adequately available and maintained for workers.
The contractor shall engage qualified and experienced Resident Engineer(s) and Assistant(s) to the satisfaction of BMC.

Source: Original DTCNView source document

Contract conditions

17 items

The period of completion ranges from 60 to 180 calendar days.
The accepted bid price, if lower than 15% less than the estimated cost, will result in rejection of the bid.
The successful bidder must submit a work programme and sign the agreement within 7 days of the LoA.

Show 14 more

The bid shall remain valid for a period of 120 days from the date of opening.
The contractor shall bear all Taxes, Duties, Levies, Cess, Entry Tax, Income Tax, Royalties, Fair Weather Charges, and Tollages.
The total amount of compensation for delay in completion shall not exceed 10% of the Tendered Value of work, computed @1.50% per month on a per-day basis.
Unilateral stoppage of work without prior written permission of BMC will be considered a breach of contract.
The contract may be rescinded if the contractor fails to rectify defective work, suspends work, or fails to complete the work within the stipulated date.
Contractors may be blacklisted for misbehavior, tender fixing, non-achievement of milestones, violation of contract conditions, jeopardizing state security, or submitting false documents.
No payment will be made for preparatory/facilitating works.
The contractor is responsible for the safe custody of materials at work sites.
The contractor must pay fair wages to all laborers as per State Public Works Department rates or Minimum Wages Act 1948, whichever is higher.
BMC has the right to deduct from the contractor's money to compensate workers for non-payment of wages or unauthorized deductions.
The contractor is primarily liable for all payments and observance of labor regulations.
The contractor must provide workman's compensation for any injury/loss sustained by workers.
The contractor shall indemnify BMC against all claims for injuries or damages to any person/property arising from negligence or fault.
For legal disputes, the jurisdiction shall be within the State of Odisha.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Bill of quantities

12 priced items · ₹46.60 L (₹46,60,427)

Download BOQ file

Major components

Share of BOQ amount, grouped by item description

Concrete & RCC60%₹27.97 L
Reinforcement steel3%₹1.34 L
Earthwork & excavation1%₹44.5K
Other items36%₹16.84 L

Largest items

By amount

Providing and Laying Factory made Chamfered edge Cement Concrete Paver Bliocks of required strength, thicknes…Item 10 · 4,100 Sqm₹24.94 L
C:C: (1:2:4) using 12 mm to 20 mm size H.G. stone chips including the cost of all materials labour carriage,…Item 11 · 154.2 cum₹11.95 L
6mm thick C:P (1:4) finished smoothItem 8 · 1,394 Sqm₹2.50 L
Dismantlling and removing cement concrete including stacking the useful materials for re-use and removing the…Item 1 · 211.15 cum₹1.85 L
P:C:C: (1:4:8) using 4 cm. size H.G. (C.B) metal including the cost of all materials, labour carriage, royalt…Item 4 · 24.6 cum₹1.44 L

Tender details

Tender reference: BMC-EE-Tender Cell-82/2026-27 dt. 13.10.2026
Tender ID: 2026_ORULB_143600_25
District: Khordha
Location: BMC AREA
Tender type: Open Tender
Tender category: Works
Period of work: 150 days

Show all 9 fields

Product category: Civil Works - Others
Pincode: 751022

Authority

State
Government of Odisha
Department
Municipal Bodies
Body
Bhubaneswar Municipal Corporation
Inviting authority
Executive Engineer (Central Tender Cell)

All Municipal Bodies tenders in Khordha →

Costs

Estimated value: ₹46,60,427; ₹46.60 lakh
EMD / bid security: ₹46,700; Exemption available for eligible bidders
Tender fee: ₹6,000; Cost of bid document

Bid validity: 120 days

Security & deductions from the DTCN (11)

SC/ST contractors up to 'B' Class may deposit Security Deposit (EMD, initial security, and Performance Security) at half the usual rate.
Each intending bidder must furnish EMD @ 1% of the Estimated Cost.
If the accepted bid price is lower than the Cost Put to Tender, Additional Performance Security (APS) will be required on an incremental basis.
The successful bidder must deposit Initial Security Deposit (ISD) of not less than 2% of the accepted value within 7 days of the Letter of Acceptance (LoA).
The successful bidder must submit the APS amount within 7 days from the date of communication.
The BG for APS should remain valid at least till one month after expiry of the stipulated date of completion and Defect Liability Period.
The BG for Performance Security should remain valid till three years after expiry of the duration for completion of the work.
Failure to submit APS, Performance Security, and sign the agreement within the prescribed time will lead to cancellation of LoA and other actions.
5% of each bill amount will be withheld by BMC towards performance security.
In case of contract rescission, ISD, SD, and APS will be forfeited, and 20% of the value of the leftover work will be realized as penalty.
The contractor shall not subcontract/sublet the work; doing so will result in rescission of the contract and forfeiture of EMD, ISD, and penalty.

Source: Original DTCN

Frequently asked questions

Eligibility & bid requirements

DTCN analysed45 requirements extracted17 documents identifiedExtracted from the official tender document

Eligibility

5 items

Bidders must be registered with the Odisha State Government or of equivalent grade/class registered with Central Government/ any other State Government/ MES/Railways.
Bidders must possess an up-to-date compatible Digital Signature Certificate.
Contractors registered elsewhere but not with the Government of Odisha must register with the appropriate state authority before work award/agreement signing.

Show 2 more

Bidders undergoing Corporate Debt Restructuring (CDR)/Strategic Debt Restructuring (SDR), facing recovery proceedings from Financial Institutions, or declared 'Sick' by BIFR are not eligible.
SC and ST Category Contractors may avail 10% price preference as per Works Department Resolution No. 16262 dated 30.10.2018.

Source: Original DTCNView source document

Experience

2 items

Each intending bidder (unless a Civil Engineer Contractor) must deploy at least one experienced Civil Engineer at the work site for the full time during layout and execution.
The Civil Engineer must have a Diploma or Degree in Civil Engineering from an AICTE-recognized institute and at least two years of post-qualification experience in civil engineering survey, monitoring, quality control, or construction.

Source: Original DTCNView source document

Financial

11 items

SC/ST contractors up to 'B' Class may deposit Security Deposit (EMD, initial security, and Performance Security) at half the usual rate.
Each intending bidder must furnish EMD @ 1% of the Estimated Cost.
If the accepted bid price is lower than the Cost Put to Tender, Additional Performance Security (APS) will be required on an incremental basis.

Show 8 more

The successful bidder must deposit Initial Security Deposit (ISD) of not less than 2% of the accepted value within 7 days of the Letter of Acceptance (LoA).
The successful bidder must submit the APS amount within 7 days from the date of communication.
The BG for APS should remain valid at least till one month after expiry of the stipulated date of completion and Defect Liability Period.
The BG for Performance Security should remain valid till three years after expiry of the duration for completion of the work.
Failure to submit APS, Performance Security, and sign the agreement within the prescribed time will lead to cancellation of LoA and other actions.
5% of each bill amount will be withheld by BMC towards performance security.
In case of contract rescission, ISD, SD, and APS will be forfeited, and 20% of the value of the leftover work will be realized as penalty.
The contractor shall not subcontract/sublet the work; doing so will result in rescission of the contract and forfeiture of EMD, ISD, and penalty.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

10 items

Bidders must be in possession of or have a lease/hire agreement for tools, plants, equipment, and machinery as per Schedule-A.
The successful bidder must deploy at least one experienced Civil Engineer at the work site with a Diploma or Degree in Civil Engineering and at least two years of post-qualification experience.
Bidders must possess or have lease/hire agreements for tools, plants, equipment, and machinery as per Schedule-A.

Show 7 more

The contractor shall provide all materials required for the work, conforming to relevant latest editions of BIS specifications and Codes of Practices.
The contractor must facilitate quality tests through Government or Government authorized laboratories, coordinating sample collection, preservation, and testing.
Specific tests are required for paver blocks/kerb stones, concrete roads (slump cone, compressive strength, core cutting, sieve analysis), asphalt roads (bitumen quality/grade, bitumen content, temperature, core test), and sub-base (compaction, sieve analysis, CBR/Los Angeles Abrasion Test).
The contractor must provide suitable scaffolding, working platforms, gangways, stairways, safe means of access, and take precautions against electrical equipment and fire.
The contractor must provide all necessary fencing and light to protect the public from accident.
All personal safety equipment must be adequately available and maintained for workers.
The contractor shall engage qualified and experienced Resident Engineer(s) and Assistant(s) to the satisfaction of BMC.

Source: Original DTCNView source document

Contract conditions

17 items

The period of completion ranges from 60 to 180 calendar days.
The accepted bid price, if lower than 15% less than the estimated cost, will result in rejection of the bid.
The successful bidder must submit a work programme and sign the agreement within 7 days of the LoA.

Show 14 more

The bid shall remain valid for a period of 120 days from the date of opening.
The contractor shall bear all Taxes, Duties, Levies, Cess, Entry Tax, Income Tax, Royalties, Fair Weather Charges, and Tollages.
The total amount of compensation for delay in completion shall not exceed 10% of the Tendered Value of work, computed @1.50% per month on a per-day basis.
Unilateral stoppage of work without prior written permission of BMC will be considered a breach of contract.
The contract may be rescinded if the contractor fails to rectify defective work, suspends work, or fails to complete the work within the stipulated date.
Contractors may be blacklisted for misbehavior, tender fixing, non-achievement of milestones, violation of contract conditions, jeopardizing state security, or submitting false documents.
No payment will be made for preparatory/facilitating works.
The contractor is responsible for the safe custody of materials at work sites.
The contractor must pay fair wages to all laborers as per State Public Works Department rates or Minimum Wages Act 1948, whichever is higher.
BMC has the right to deduct from the contractor's money to compensate workers for non-payment of wages or unauthorized deductions.
The contractor is primarily liable for all payments and observance of labor regulations.
The contractor must provide workman's compensation for any injury/loss sustained by workers.
The contractor shall indemnify BMC against all claims for injuries or damages to any person/property arising from negligence or fault.
For legal disputes, the jurisdiction shall be within the State of Odisha.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Costs

Estimated value

₹46,60,427

₹46.60 lakh

EMD / bid security

₹46,700

Exemption available for eligible bidders

Tender fee

₹6,000

Cost of bid document

Bid validity: 120 days

Security & deductions from the DTCN (11)

SC/ST contractors up to 'B' Class may deposit Security Deposit (EMD, initial security, and Performance Security) at half the usual rate.
Each intending bidder must furnish EMD @ 1% of the Estimated Cost.
If the accepted bid price is lower than the Cost Put to Tender, Additional Performance Security (APS) will be required on an incremental basis.
The successful bidder must deposit Initial Security Deposit (ISD) of not less than 2% of the accepted value within 7 days of the Letter of Acceptance (LoA).
The successful bidder must submit the APS amount within 7 days from the date of communication.
The BG for APS should remain valid at least till one month after expiry of the stipulated date of completion and Defect Liability Period.
The BG for Performance Security should remain valid till three years after expiry of the duration for completion of the work.
Failure to submit APS, Performance Security, and sign the agreement within the prescribed time will lead to cancellation of LoA and other actions.
5% of each bill amount will be withheld by BMC towards performance security.
In case of contract rescission, ISD, SD, and APS will be forfeited, and 20% of the value of the leftover work will be realized as penalty.
The contractor shall not subcontract/sublet the work; doing so will result in rescission of the contract and forfeiture of EMD, ISD, and penalty.

Source: Original DTCN

Frequently asked questions

Development of Roads and drains at various locations in Ward No. 50

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

Development of Roads and drains at various locations in Ward No. 50

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more