What is the last date to bid for this tender?

Bids must be submitted on the Odisha eProcurement portal (tendersodisha.gov.in) by 05 Nov 2026, 05:00 PM. Bids are scheduled to open on 06 Nov 2026, 11:00 AM.

What is the estimated value of this tender?

The estimated tender value is ₹59.32 L (₹59,32,197).

How much EMD is required?

The EMD (bid security) is ₹59.4K (₹59,400). The portal lists EMD exemption as available for eligible bidders — check the DTCN for who qualifies.

Who can bid for this tender?

The DTCN states: Bidders must possess an up-to-date compatible Digital Signature Certificate; Contractors must be registered with Odisha State Government or equivalent grade/class with Central Government/any other State Government/MES/Railways.

What work experience is required?

As extracted from the DTCN: Bidders must have successfully completed similar type of work(s) in any one year during the last 7 years, meeting one of the following: three completed works each costing not less than 40% of the estimated cost, or two completed works each costing not less than 50% of the estimated cost, or one completed work costing not less than 80% of the estimated cost; Similar type of work must cover construction of Road/Drain/Culvert/Bridge/Building work(s) for State Government/Central Government/PSUs/ULBs/Municipal Corporation.

What is the completion period?

The period of work is 240 days, and bids must remain valid for 120 days.

Which department issued this tender?

This tender was issued by Municipal Bodies, Bhubaneswar Municipal Corporation; the tender inviting authority is the Executive Engineer (Central Tender Cell).

What documents are required to submit a bid?

The DTCN lists 17 documents, including Online Generated Bid-Submission Confirmation Sheet, Original Affidavit(s) sworn before Notary Public or Executive Magistrate, Valid Registration Certificate, GST Registration Certificate & GSTIN, PAN Card, No Relationship Certificate (Non-Judicial Stamp Paper), and 11 more.

RoadLive

Construction of Roads in front of EWS Block-3 and other locations in ward No. 13

BMC AREA, Khordha Municipal BodiesBhubaneswar Municipal Corporation

Tender ID 2026_ORULB_143526_3Ref BMC-EE-Tender Cell-81/2026-27 dt. 13.10.2026

Estimated value: ₹59.32 L
EMD: ₹59.4K; Exemption available
Tender fee: ₹10.0K
Work period: 240 days

Closing soon

2 days left

05 Nov 2026, 05:00 PM

About this tender

Municipal Bodies has invited bids for “Construction of Roads in front of EWS Block-3 and other locations in ward No. 13” in BMC AREA, Khordha district, Odisha. The estimated tender value is ₹59.32 lakh and the completion period is 240 days. Bids must be submitted by 05 Nov 2026, 05:00 PM.

Bid readiness

Based on the tender, not your profile

Needs review: Tender is open — only 2 days left
Done: BOQ available · 12 items
Done: DTCN analysed · 32 requirements extracted
Done: 17 required documents identified
Needs review: Experience requirement needs review
Needs review: Financial requirements need review

Review requirements

Important dates

All times IST, as published on the portal

Published17 Oct 2026, 11:00 AM
Document downloadUntil 05 Nov 2026
Submission deadline· 2 days left05 Nov 2026, 05:00 PM
Bid opening06 Nov 2026, 11:00 AM

Tender intelligence

Eligibility & bid requirements

DTCN analysed32 requirements extracted17 documents identifiedExtracted from the official tender document

Bhubaneswar Municipal Corporation invites Percentage Rate Bids for 12 civil construction works, with estimated costs ranging from Rs. 50.79 Lakhs to Rs. 2.66 Crores. The works involve construction and improvement of roads, drains, and a community center, with completion periods between 180 and 365 calendar days. Bidders must be "B" Class or "A" Class contractors, depending on the specific work, and fulfill detailed eligibility criteria including prior experience and financial turnover.

Eligibility

3 items

Bidders must possess an up-to-date compatible Digital Signature Certificate.
Contractors must be registered with Odisha State Government or equivalent grade/class with Central Government/any other State Government/MES/Railways.
Contractors registered elsewhere but not with Government of Odisha must register with the appropriate registering authority of the State Government before award of work.

Source: Original DTCNView source document

Experience

5 items

Bidders must have successfully completed similar type of work(s) in any one year during the last 7 years, meeting one of the following: three completed works each costing not less than 40% of the estimated cost, or two completed works each costing not less than 50% of the estimated cost, or one completed work costing not less than 80% of the estimated cost.
Similar type of work must cover construction of Road/Drain/Culvert/Bridge/Building work(s) for State Government/Central Government/PSUs/ULBs/Municipal Corporation.
Bidders must have an Average Annual Financial Turnover of not less than 30% of the estimated cost of the corresponding work during the last 3 financial years (FY 2023-24, 2024-25, 2025-26), certified by a registered Chartered Accountant.

Show 2 more

Unless a Civil Engineer Contractor, the successful bidder must deploy at least one experienced Civil Engineer at the work site with a Diploma or Degree in Civil Engineering from an AICTE recognized institute and at least two years of post-qualification experience.
Bidders who have applied for/are undergoing Corporate Debt Restructuring (CDR)/Strategic Debt Restructuring (SDR) or facing recovery proceedings from Financial Institutions or declared 'Sick' by BIFR in the last three financial years are not eligible.

Source: Original DTCNView source document

Financial

6 items

Each intending bidder must furnish EMD @ 1% of the Estimated Cost put to tender, submitted online.
The successful bidder must furnish Initial Security Deposit (ISD) amounting to not less than 2% of the accepted value of the tender within 7 days from the date of issue of Letter of Acceptance (LoA).
Additional Performance Security (APS) will be required if the accepted bid price is lower than the Cost Put to Tender, calculated incrementally based on the percentage difference.

Show 3 more

The APS must be deposited within 7 days from the date of communication to the bidder.
The contractor shall not subcontract/sublet the work; doing so will result in rescission of the contract and forfeiture of EMD, ISD, and penalties.
8% of each bill amount will be withheld by BMC towards performance security.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

8 items

Bidders must be in possession of or under lease/hire agreement for tools, plants, equipment, and machineries as per Schedule-‘D’.
Bidders must secure a minimum qualifying mark of 80 in the evaluation of tools, plants, machineries, and equipment.
Deployment of at least one experienced Civil Engineer at the work site for the full time during layout and execution of the work, with a Diploma or Degree in Civil Engineering from an AICTE recognized institute and at least two years of post-qualification experience.

Show 5 more

Possession or lease/hire agreement for specific tools, plants, machineries, and equipment including Truck/Tipper (1 No.), Hydraulic Excavator (1 No.), Mechanical concrete mixture machine (1 No.), Vibratory Tandem Roller Compactor of about 9 Ton Weight (1 No.), Plate/Skid Vibrator (1 No.), Needle Vibrator (1 No), Vehicle Mounted/Driven Water Tank of 3000L capacity or more (1 No.), Survey Instrument (Auto Level/Total Station) (1 No.), and Steel Shuttering and Centring material (500 Sqm).
Successful bidders must achieve a minimum qualifying mark of 80 for the listed tools, plants, machineries, and equipment.
The contractor shall provide all materials required for the work at their own expense, conforming to relevant latest editions of BIS specifications and Codes of Practices.
The contractor must facilitate quality testing of materials through Government or Government authorized laboratories as directed by the authority, covering tests for paver blocks/kerb stones, concrete roads, asphalt roads, and sub-base materials.
The contractor shall engage qualified and experienced Resident Engineer(s) and Assistant(s) to the satisfaction of BMC.

Source: Original DTCNView source document

Contract conditions

10 items

The bid validity period is 120 days from the date of technical bid opening.
If the percentage rate quoted by any bidder is lower than or equal to 15% less than the estimated cost, such bid shall be rejected.
The successful bidder must submit a work programme and sign the agreement within 7 days from the date of issue of LoA.

Show 7 more

The defect liability period is three years from the date of completion of the original work.
A penalty for delay in execution will be computed at 1.50% per month on a per-day basis, not exceeding 10% of the Tendered Value of work.
The contractor is responsible for safe custody of materials at work sites.
The contractor shall bear all Taxes, Duties, Levies, Cess, Entry Tax, Income Tax, Royalties, Fair Weather Charges, and Tollages.
The contractor must comply with all regulations regarding payment of fair wages to laborers.
BMC reserves the right to rescind the contract for various reasons including failure to rectify defective work, suspension of work, or failure to comply with DTCN provisions, with a penalty of 20% of the value of the left-over work and potential blacklisting.
The jurisdiction for legal disputes will be within the State of Odisha.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Bill of quantities

12 priced items · ₹59.32 L (₹59,32,197)

Download BOQ file

Major components

Share of BOQ amount, grouped by item description

Concrete & RCC57%₹33.72 L
Road & bituminous work41%₹24.03 L
Earthwork & excavation2%₹95.5K
Other items1%₹61.8K

Largest items

By amount

Providind and laying "BITUMINOUS MACADAM" with hot mix plant using crushed aggregates of specified grading pr…Item 3 · 213.53 cum₹22.15 L
Providing and laying semi dense bituminous concrete with batch type hot mix plant using crushed aggregates of…Item 4 · 140.51 cum₹19.89 L
CC M-25 with 20mm size downgraded CBHG chips including all cost, conveyance, royalty and taxes etc. complete…Item 9 · 141.9 cum₹9.29 L
PCC in prop. (1:3:6) in foundation and bed using 4 cm size h.g C.B metal of approved quality and approved qua…Item 8 · 66.82 cum₹4.15 L
Labour for applying primer coat / tack coat, Using materials (Tack coat) for Bituminous surface for nominal b…Item 2 · 5,080.55 sqm₹1.54 L

Tender details

Tender reference: BMC-EE-Tender Cell-81/2026-27 dt. 13.10.2026
Tender ID: 2026_ORULB_143526_3
District: Khordha
Location: BMC AREA
Tender type: Open Tender
Tender category: Works
Period of work: 240 days

Show all 9 fields

Product category: Civil Works - Roads
Pincode: 751022

Authority

State
Government of Odisha
Department
Municipal Bodies
Body
Bhubaneswar Municipal Corporation
Inviting authority
Executive Engineer (Central Tender Cell)

All Municipal Bodies tenders in Khordha →

Costs

Estimated value: ₹59,32,197; ₹59.32 lakh
EMD / bid security: ₹59,400; Exemption available for eligible bidders
Tender fee: ₹10,000; Cost of bid document

Bid validity: 120 days

Security & deductions from the DTCN (6)

Each intending bidder must furnish EMD @ 1% of the Estimated Cost put to tender, submitted online.
The successful bidder must furnish Initial Security Deposit (ISD) amounting to not less than 2% of the accepted value of the tender within 7 days from the date of issue of Letter of Acceptance (LoA).
Additional Performance Security (APS) will be required if the accepted bid price is lower than the Cost Put to Tender, calculated incrementally based on the percentage difference.
The APS must be deposited within 7 days from the date of communication to the bidder.
The contractor shall not subcontract/sublet the work; doing so will result in rescission of the contract and forfeiture of EMD, ISD, and penalties.
8% of each bill amount will be withheld by BMC towards performance security.

Source: Original DTCN

Frequently asked questions

Eligibility & bid requirements

DTCN analysed32 requirements extracted17 documents identifiedExtracted from the official tender document

Eligibility

3 items

Bidders must possess an up-to-date compatible Digital Signature Certificate.
Contractors must be registered with Odisha State Government or equivalent grade/class with Central Government/any other State Government/MES/Railways.
Contractors registered elsewhere but not with Government of Odisha must register with the appropriate registering authority of the State Government before award of work.

Source: Original DTCNView source document

Experience

5 items

Bidders must have successfully completed similar type of work(s) in any one year during the last 7 years, meeting one of the following: three completed works each costing not less than 40% of the estimated cost, or two completed works each costing not less than 50% of the estimated cost, or one completed work costing not less than 80% of the estimated cost.
Similar type of work must cover construction of Road/Drain/Culvert/Bridge/Building work(s) for State Government/Central Government/PSUs/ULBs/Municipal Corporation.
Bidders must have an Average Annual Financial Turnover of not less than 30% of the estimated cost of the corresponding work during the last 3 financial years (FY 2023-24, 2024-25, 2025-26), certified by a registered Chartered Accountant.

Show 2 more

Unless a Civil Engineer Contractor, the successful bidder must deploy at least one experienced Civil Engineer at the work site with a Diploma or Degree in Civil Engineering from an AICTE recognized institute and at least two years of post-qualification experience.
Bidders who have applied for/are undergoing Corporate Debt Restructuring (CDR)/Strategic Debt Restructuring (SDR) or facing recovery proceedings from Financial Institutions or declared 'Sick' by BIFR in the last three financial years are not eligible.

Source: Original DTCNView source document

Financial

6 items

Each intending bidder must furnish EMD @ 1% of the Estimated Cost put to tender, submitted online.
The successful bidder must furnish Initial Security Deposit (ISD) amounting to not less than 2% of the accepted value of the tender within 7 days from the date of issue of Letter of Acceptance (LoA).
Additional Performance Security (APS) will be required if the accepted bid price is lower than the Cost Put to Tender, calculated incrementally based on the percentage difference.

Show 3 more

The APS must be deposited within 7 days from the date of communication to the bidder.
The contractor shall not subcontract/sublet the work; doing so will result in rescission of the contract and forfeiture of EMD, ISD, and penalties.
8% of each bill amount will be withheld by BMC towards performance security.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

8 items

Bidders must be in possession of or under lease/hire agreement for tools, plants, equipment, and machineries as per Schedule-‘D’.
Bidders must secure a minimum qualifying mark of 80 in the evaluation of tools, plants, machineries, and equipment.
Deployment of at least one experienced Civil Engineer at the work site for the full time during layout and execution of the work, with a Diploma or Degree in Civil Engineering from an AICTE recognized institute and at least two years of post-qualification experience.

Show 5 more

Possession or lease/hire agreement for specific tools, plants, machineries, and equipment including Truck/Tipper (1 No.), Hydraulic Excavator (1 No.), Mechanical concrete mixture machine (1 No.), Vibratory Tandem Roller Compactor of about 9 Ton Weight (1 No.), Plate/Skid Vibrator (1 No.), Needle Vibrator (1 No), Vehicle Mounted/Driven Water Tank of 3000L capacity or more (1 No.), Survey Instrument (Auto Level/Total Station) (1 No.), and Steel Shuttering and Centring material (500 Sqm).
Successful bidders must achieve a minimum qualifying mark of 80 for the listed tools, plants, machineries, and equipment.
The contractor shall provide all materials required for the work at their own expense, conforming to relevant latest editions of BIS specifications and Codes of Practices.
The contractor must facilitate quality testing of materials through Government or Government authorized laboratories as directed by the authority, covering tests for paver blocks/kerb stones, concrete roads, asphalt roads, and sub-base materials.
The contractor shall engage qualified and experienced Resident Engineer(s) and Assistant(s) to the satisfaction of BMC.

Source: Original DTCNView source document

Contract conditions

10 items

The bid validity period is 120 days from the date of technical bid opening.
If the percentage rate quoted by any bidder is lower than or equal to 15% less than the estimated cost, such bid shall be rejected.
The successful bidder must submit a work programme and sign the agreement within 7 days from the date of issue of LoA.

Show 7 more

The defect liability period is three years from the date of completion of the original work.
A penalty for delay in execution will be computed at 1.50% per month on a per-day basis, not exceeding 10% of the Tendered Value of work.
The contractor is responsible for safe custody of materials at work sites.
The contractor shall bear all Taxes, Duties, Levies, Cess, Entry Tax, Income Tax, Royalties, Fair Weather Charges, and Tollages.
The contractor must comply with all regulations regarding payment of fair wages to laborers.
BMC reserves the right to rescind the contract for various reasons including failure to rectify defective work, suspension of work, or failure to comply with DTCN provisions, with a penalty of 20% of the value of the left-over work and potential blacklisting.
The jurisdiction for legal disputes will be within the State of Odisha.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Costs

Estimated value

₹59,32,197

₹59.32 lakh

EMD / bid security

₹59,400

Exemption available for eligible bidders

Tender fee

₹10,000

Cost of bid document

Bid validity: 120 days

Security & deductions from the DTCN (6)

Each intending bidder must furnish EMD @ 1% of the Estimated Cost put to tender, submitted online.
The successful bidder must furnish Initial Security Deposit (ISD) amounting to not less than 2% of the accepted value of the tender within 7 days from the date of issue of Letter of Acceptance (LoA).
Additional Performance Security (APS) will be required if the accepted bid price is lower than the Cost Put to Tender, calculated incrementally based on the percentage difference.
The APS must be deposited within 7 days from the date of communication to the bidder.
The contractor shall not subcontract/sublet the work; doing so will result in rescission of the contract and forfeiture of EMD, ISD, and penalties.
8% of each bill amount will be withheld by BMC towards performance security.

Source: Original DTCN

Frequently asked questions

Construction of Roads in front of EWS Block-3 and other locations in ward No. 13

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

Construction of Roads in front of EWS Block-3 and other locations in ward No. 13

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more