What is the last date to bid for this tender?

Bids must be submitted on the Odisha eProcurement portal (tendersodisha.gov.in) by 10 Nov 2026, 05:00 PM. Bids are scheduled to open on 11 Nov 2026, 11:00 AM.

What is the estimated value of this tender?

The estimated tender value is ₹33.90 L (₹33,89,761).

How much EMD is required?

The EMD (bid security) is ₹33.9K (₹33,900). The portal lists EMD exemption as available for eligible bidders — check the DTCN for who qualifies.

Who can bid for this tender?

The DTCN states: Contractors must be of 'D', 'C', or 'B' Class as indicated against each work in the DTCN; Contractors must be registered with Odisha State Government or equivalent grade/class registered with Central Government/any other State Government/MES/Railways.

What work experience is required?

As extracted from the DTCN: Successful bidders (unless a Civil Engineer Contractor) must deploy at least one experienced Civil Engineer at the work site with a Diploma or Degree in Civil Engineering from an AICTE recognized institute and at least two years of post-qualification experience; Bidders who have applied for/are undergoing Corporate Debt Restructuring (CDR)/Strategic Debt Restructuring (SDR), facing recovery proceedings from Financial Institutions, or declared 'Sick' by BIFR in the last three financial years are not eligible.

What is the completion period?

The period of work is 90 days, and bids must remain valid for 120 days.

Which department issued this tender?

This tender was issued by Municipal Bodies, Bhubaneswar Municipal Corporation; the tender inviting authority is the Executive Engineer (Central Tender Cell).

What documents are required to submit a bid?

The DTCN lists 14 documents, including Cost of Bid Document (online remittance), Earnest Money Deposit (EMD) @ 1% of Estimated Cost (online remittance), Valid Registration Certificate, Valid GST Registration Certificate & GSTIN, PAN Card, No Relationship Certificate (Non-Judicial Stamp Paper), and 8 more.

RoadLive

Construction of Road and Drain at Nehru Slum Unit-8, Development of E Colony Field with Approach Road and Repairing of all Internal Roads of Nilapani Tanki Slum, Narayani Slum, Jogi Slum, OCC Basti and A-Type Slum in Ward No. 47

BMC AREA, Khordha Municipal BodiesBhubaneswar Municipal Corporation

Tender ID 2026_ORULB_144315_13Ref BMC-EE-Tender Cell-85/2026-27 dt. 23.10.2026

Estimated value: ₹33.90 L
EMD: ₹33.9K; Exemption available
Tender fee: ₹6.0K
Work period: 90 days

Closing in

8 days left

10 Nov 2026, 05:00 PM

About this tender

Municipal Bodies has invited bids for “Construction of Road and Drain at Nehru Slum Unit-8, Development of E Colony Field with Approach Road and Repairing of all Internal Roads of Nilapani Tanki Slum, Narayani Slum, Jogi Slum, OCC Basti and A-Type Slum in Ward No. 47” in BMC AREA, Khordha district, Odisha. The estimated tender value is ₹33.90 lakh and the completion period is 90 days. Bids must be submitted by 10 Nov 2026, 05:00 PM.

Bid readiness

Based on the tender, not your profile

Done: Tender is currently open
Done: BOQ available · 22 items
Done: DTCN analysed · 38 requirements extracted
Done: 14 required documents identified
Needs review: Experience requirement needs review
Needs review: Financial requirements need review

Review requirements

Important dates

All times IST, as published on the portal

Published29 Oct 2026, 10:30 AM
Document downloadUntil 10 Nov 2026
Submission deadline· 8 days left10 Nov 2026, 05:00 PM
Bid opening11 Nov 2026, 11:00 AM

Tender intelligence

Eligibility & bid requirements

DTCN analysed38 requirements extracted14 documents identifiedExtracted from the official tender document

Bhubaneswar Municipal Corporation invites percentage rate bids for 34 civil construction and repair works across various wards in Bhubaneswar. The estimated costs range from Rs. 3.38 Lakhs to Rs. 42.37 Lakhs, with completion periods between 45 and 150 calendar days. Contractors of 'D', 'C', or 'B' class, as specified for each work, are eligible to bid through the e-Procurement portal.

Eligibility

4 items

Contractors must be of 'D', 'C', or 'B' Class as indicated against each work in the DTCN.
Contractors must be registered with Odisha State Government or equivalent grade/class registered with Central Government/any other State Government/MES/Railways.
Bidders must possess an up-to-date compatible Digital Signature Certificate.

Show 1 more

Contractors registered elsewhere but not with the Government of Odisha must register with the appropriate registering authority of the State Government before award of work/signing of the Agreement.

Source: Original DTCNView source document

Experience

2 items

Successful bidders (unless a Civil Engineer Contractor) must deploy at least one experienced Civil Engineer at the work site with a Diploma or Degree in Civil Engineering from an AICTE recognized institute and at least two years of post-qualification experience.
Bidders who have applied for/are undergoing Corporate Debt Restructuring (CDR)/Strategic Debt Restructuring (SDR), facing recovery proceedings from Financial Institutions, or declared 'Sick' by BIFR in the last three financial years are not eligible.

Source: Original DTCNView source document

Financial

7 items

SC/ST contractors up to 'B' Class are eligible for Security Deposit (EMD, Initial Security, Performance Security) at half the usual rate.
Each intending bidder must furnish EMD @ 1% of the Estimated Cost put to tender, payable online.
Initial Security Deposit (ISD) of not less than 2% of the accepted tender value must be furnished within 7 days of Letter of Acceptance (LoA) in specified forms (NSC/Postal Saving Pass Book/Post Office Time Deposit/Kishan Vikash Patra/Deposit Receipt in Schedule Bank or Bank Guarantee).

Show 4 more

Additional Performance Security (APS) will be obtained on an incremental basis if the accepted bid price is lower than the Cost Put to Tender, calculated based on the 'Rounding Off of Percentage Less (ROPL)'.
APS must be deposited within 7 days from communication in the form of Insurance Surety Bond, Account Payee Demand Draft, Fixed Deposit Receipt, Bank Guarantee, or Online Payment.
5% of each bill amount payable to the contractor will be withheld towards performance security.
The contractor shall not subcontract/sublet the work; violation will lead to rescission of contract, forfeiture of EMD/ISD, and penalty.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

13 items

Bidders must be in possession of or have a lease/hire agreement for tools, plants, equipment, and machineries as per Schedule- 'A'.
Successful bidders (unless a Civil Engineer Contractor) must deploy at least one experienced Civil Engineer at the work site for the full time during layout and execution.
The deployed Civil Engineer must hold a Diploma or Degree in Civil Engineering from an AICTE recognized institute.

Show 10 more

The deployed Civil Engineer must have at least two years of post-qualification experience in Civil Engineering survey, monitoring and quality control, construction works with quantity measurements, or a combination thereof.
Bidders must ensure possession or lease/hire agreement for tools, plants, equipment, and machineries as per Schedule- 'A' of the DTCN.
The contractor shall conduct all required tests on materials as directed by the Engineer-in-Charge, including specific tests for paver blocks, concrete roads, asphalt roads, and sub-base materials.
Quality certificates from manufacturers are required for paver blocks/kerb stones for each consignment.
For concrete roads, slump cone tests, compressive strength tests (7 & 28 days), core cutting tests, and sieve analysis of coarse aggregates for PCC are required.
For Ready Mix Concrete, a test certificate detailing mix proportions, cement type, admixtures, and concrete grade is required for each project.
For asphalt roads, quality and grade certificates for bitumen, bitumen content tests, temperature tests of bitumen mixed aggregate, and core tests for density and thickness are required.
For sub-base, compaction/density tests, sieve analysis of coarse aggregate, and CBR or Los Angeles Abrasion Tests are required.
The contractor shall provide all materials required for the work, conforming to relevant latest BIS specifications and Codes of Practices.
The contractor shall engage qualified and experienced Resident Engineer(s) and Assistant(s) to the satisfaction of BMC.

Source: Original DTCNView source document

Contract conditions

12 items

The period of completion for works ranges from 45 to 150 Calendar Days.
Bids must be submitted online through www.tendersodisha.gov.in by 05:00 P.M. of 10.11.2026.
Technical and Financial Bids will be opened on 11.11.2026 from 11:00 A.M. onwards.

Show 9 more

The bid document cost ranges from Rs. 2000/- to Rs. 6000/- depending on the estimated cost of the work.
If the % rate quoted by any bidder is lower than or equal to 15% less (-), such bid shall be rejected.
Each received bid shall remain valid for a period of 120 days from the date of opening.
A penalty for delay in execution will be computed @1.50% per month on a per-day basis, not exceeding 10% of the Tendered Value of work.
The contractor shall bear all Taxes, Duties, Levies, Cess, Entry Tax, Income Tax, Royalties, Fair Weather Charges, and Tollages.
The contractor must submit a work program and sign the agreement within 7 days from the date of issue of LoA.
If the L1 bidder does not turn up for agreement, they will be debarred for at least three years in BMC and blacklisted.
The total amount of compensation for delay shall not exceed 10% of the Tendered Value of work.
For legal disputes, the place of occurrence shall be treated as the present jurisdiction of BMC.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Bill of quantities

22 priced items · ₹33.90 L (₹33,89,761)

Download BOQ file

Major components

Share of BOQ amount, grouped by item description

Concrete & RCC29%₹9.95 L
Earthwork & excavation4%₹1.31 L
Reinforcement steel3%₹1.00 L
Doors, windows & steelwork3%₹89.9K
Road & bituminous work2%₹70.2K
Plaster, paint & finishing0%₹3.2K

Largest items

By amount

P:C:C: (1:4:8) using 4 cm. size H.G. (C.B) metal including the cost of all materials, labour carriage, royalt…Item 6 · 182.76 cum₹10.70 L
C:C: (1:2:4) using 12 mm to 20 mm size H.G. stone chips including the cost of all materials labour carriage,…Item 9 · 103.06 cum₹7.98 L
Providing and Laying Factory made Chamfered edge Cement Concrete Paver Bliocks of required strength, thicknes…Item 7 · 821.61 Sqm₹5.00 L
Providing and laying at or near ground level factory made kerb stone of M-30 grade cement concrete in positio…Item 14 · 760 nos₹1.24 L
Supplying fitting & placing uncoated HYSD reinforcement including cutting, bendind,binding & placing the stee…Item 12 · 10.47 qntl₹1.00 L

Tender details

Tender reference: BMC-EE-Tender Cell-85/2026-27 dt. 23.10.2026
Tender ID: 2026_ORULB_144315_13
District: Khordha
Location: BMC AREA
Tender type: Open Tender
Tender category: Works
Period of work: 90 days

Show all 9 fields

Product category: Civil Works - Others
Pincode: 751022

Authority

State
Government of Odisha
Department
Municipal Bodies
Body
Bhubaneswar Municipal Corporation
Inviting authority
Executive Engineer (Central Tender Cell)

All Municipal Bodies tenders in Khordha →

Costs

Estimated value: ₹33,89,761; ₹33.90 lakh
EMD / bid security: ₹33,900; Exemption available for eligible bidders
Tender fee: ₹6,000; Cost of bid document

Bid validity: 120 days

Security & deductions from the DTCN (7)

SC/ST contractors up to 'B' Class are eligible for Security Deposit (EMD, Initial Security, Performance Security) at half the usual rate.
Each intending bidder must furnish EMD @ 1% of the Estimated Cost put to tender, payable online.
Initial Security Deposit (ISD) of not less than 2% of the accepted tender value must be furnished within 7 days of Letter of Acceptance (LoA) in specified forms (NSC/Postal Saving Pass Book/Post Office Time Deposit/Kishan Vikash Patra/Deposit Receipt in Schedule Bank or Bank Guarantee).
Additional Performance Security (APS) will be obtained on an incremental basis if the accepted bid price is lower than the Cost Put to Tender, calculated based on the 'Rounding Off of Percentage Less (ROPL)'.
APS must be deposited within 7 days from communication in the form of Insurance Surety Bond, Account Payee Demand Draft, Fixed Deposit Receipt, Bank Guarantee, or Online Payment.
5% of each bill amount payable to the contractor will be withheld towards performance security.
The contractor shall not subcontract/sublet the work; violation will lead to rescission of contract, forfeiture of EMD/ISD, and penalty.

Source: Original DTCN

Frequently asked questions

About this tender

Eligibility & bid requirements

DTCN analysed38 requirements extracted14 documents identifiedExtracted from the official tender document

Eligibility

4 items

Contractors must be of 'D', 'C', or 'B' Class as indicated against each work in the DTCN.
Contractors must be registered with Odisha State Government or equivalent grade/class registered with Central Government/any other State Government/MES/Railways.
Bidders must possess an up-to-date compatible Digital Signature Certificate.

Show 1 more

Contractors registered elsewhere but not with the Government of Odisha must register with the appropriate registering authority of the State Government before award of work/signing of the Agreement.

Source: Original DTCNView source document

Experience

2 items

Successful bidders (unless a Civil Engineer Contractor) must deploy at least one experienced Civil Engineer at the work site with a Diploma or Degree in Civil Engineering from an AICTE recognized institute and at least two years of post-qualification experience.
Bidders who have applied for/are undergoing Corporate Debt Restructuring (CDR)/Strategic Debt Restructuring (SDR), facing recovery proceedings from Financial Institutions, or declared 'Sick' by BIFR in the last three financial years are not eligible.

Source: Original DTCNView source document

Financial

7 items

SC/ST contractors up to 'B' Class are eligible for Security Deposit (EMD, Initial Security, Performance Security) at half the usual rate.
Each intending bidder must furnish EMD @ 1% of the Estimated Cost put to tender, payable online.
Initial Security Deposit (ISD) of not less than 2% of the accepted tender value must be furnished within 7 days of Letter of Acceptance (LoA) in specified forms (NSC/Postal Saving Pass Book/Post Office Time Deposit/Kishan Vikash Patra/Deposit Receipt in Schedule Bank or Bank Guarantee).

Show 4 more

Additional Performance Security (APS) will be obtained on an incremental basis if the accepted bid price is lower than the Cost Put to Tender, calculated based on the 'Rounding Off of Percentage Less (ROPL)'.
APS must be deposited within 7 days from communication in the form of Insurance Surety Bond, Account Payee Demand Draft, Fixed Deposit Receipt, Bank Guarantee, or Online Payment.
5% of each bill amount payable to the contractor will be withheld towards performance security.
The contractor shall not subcontract/sublet the work; violation will lead to rescission of contract, forfeiture of EMD/ISD, and penalty.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

13 items

Bidders must be in possession of or have a lease/hire agreement for tools, plants, equipment, and machineries as per Schedule- 'A'.
Successful bidders (unless a Civil Engineer Contractor) must deploy at least one experienced Civil Engineer at the work site for the full time during layout and execution.
The deployed Civil Engineer must hold a Diploma or Degree in Civil Engineering from an AICTE recognized institute.

Show 10 more

The deployed Civil Engineer must have at least two years of post-qualification experience in Civil Engineering survey, monitoring and quality control, construction works with quantity measurements, or a combination thereof.
Bidders must ensure possession or lease/hire agreement for tools, plants, equipment, and machineries as per Schedule- 'A' of the DTCN.
The contractor shall conduct all required tests on materials as directed by the Engineer-in-Charge, including specific tests for paver blocks, concrete roads, asphalt roads, and sub-base materials.
Quality certificates from manufacturers are required for paver blocks/kerb stones for each consignment.
For concrete roads, slump cone tests, compressive strength tests (7 & 28 days), core cutting tests, and sieve analysis of coarse aggregates for PCC are required.
For Ready Mix Concrete, a test certificate detailing mix proportions, cement type, admixtures, and concrete grade is required for each project.
For asphalt roads, quality and grade certificates for bitumen, bitumen content tests, temperature tests of bitumen mixed aggregate, and core tests for density and thickness are required.
For sub-base, compaction/density tests, sieve analysis of coarse aggregate, and CBR or Los Angeles Abrasion Tests are required.
The contractor shall provide all materials required for the work, conforming to relevant latest BIS specifications and Codes of Practices.
The contractor shall engage qualified and experienced Resident Engineer(s) and Assistant(s) to the satisfaction of BMC.

Source: Original DTCNView source document

Contract conditions

12 items

The period of completion for works ranges from 45 to 150 Calendar Days.
Bids must be submitted online through www.tendersodisha.gov.in by 05:00 P.M. of 10.11.2026.
Technical and Financial Bids will be opened on 11.11.2026 from 11:00 A.M. onwards.

Show 9 more

The bid document cost ranges from Rs. 2000/- to Rs. 6000/- depending on the estimated cost of the work.
If the % rate quoted by any bidder is lower than or equal to 15% less (-), such bid shall be rejected.
Each received bid shall remain valid for a period of 120 days from the date of opening.
A penalty for delay in execution will be computed @1.50% per month on a per-day basis, not exceeding 10% of the Tendered Value of work.
The contractor shall bear all Taxes, Duties, Levies, Cess, Entry Tax, Income Tax, Royalties, Fair Weather Charges, and Tollages.
The contractor must submit a work program and sign the agreement within 7 days from the date of issue of LoA.
If the L1 bidder does not turn up for agreement, they will be debarred for at least three years in BMC and blacklisted.
The total amount of compensation for delay shall not exceed 10% of the Tendered Value of work.
For legal disputes, the place of occurrence shall be treated as the present jurisdiction of BMC.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Costs

Estimated value

₹33,89,761

₹33.90 lakh

EMD / bid security

₹33,900

Exemption available for eligible bidders

Tender fee

₹6,000

Cost of bid document

Bid validity: 120 days

Security & deductions from the DTCN (7)

SC/ST contractors up to 'B' Class are eligible for Security Deposit (EMD, Initial Security, Performance Security) at half the usual rate.
Each intending bidder must furnish EMD @ 1% of the Estimated Cost put to tender, payable online.
Initial Security Deposit (ISD) of not less than 2% of the accepted tender value must be furnished within 7 days of Letter of Acceptance (LoA) in specified forms (NSC/Postal Saving Pass Book/Post Office Time Deposit/Kishan Vikash Patra/Deposit Receipt in Schedule Bank or Bank Guarantee).
Additional Performance Security (APS) will be obtained on an incremental basis if the accepted bid price is lower than the Cost Put to Tender, calculated based on the 'Rounding Off of Percentage Less (ROPL)'.
APS must be deposited within 7 days from communication in the form of Insurance Surety Bond, Account Payee Demand Draft, Fixed Deposit Receipt, Bank Guarantee, or Online Payment.
5% of each bill amount payable to the contractor will be withheld towards performance security.
The contractor shall not subcontract/sublet the work; violation will lead to rescission of contract, forfeiture of EMD/ISD, and penalty.

Source: Original DTCN

Frequently asked questions

Construction of Road and Drain at Nehru Slum Unit-8, Development of E Colony Field with Approach Road and Repairing of all Internal Roads of Nilapani Tanki Slum, Narayani Slum, Jogi Slum, OCC Basti and A-Type Slum in Ward No. 47

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

Construction of Road and Drain at Nehru Slum Unit-8, Development of E Colony Field with Approach Road and Repairing of all Internal Roads of Nilapani Tanki Slum, Narayani Slum, Jogi Slum, OCC Basti and A-Type Slum in Ward No. 47

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more