What is the last date to bid for this tender?

Bids must be submitted on the Odisha eProcurement portal (tendersodisha.gov.in) by 16 Nov 2026, 05:00 PM. Bids are scheduled to open on 17 Nov 2026, 11:00 AM.

What is the estimated value of this tender?

The estimated tender value is ₹7.03 Cr (₹7,03,06,000).

How much EMD is required?

The EMD (bid security) is ₹7.04 L (₹7,04,000). The portal lists EMD exemption as available for eligible bidders — check the DTCN for who qualifies.

Who can bid for this tender?

The DTCN states: Contractors registered with State Governments (as per Contract Data Sl 7.A), Joint Ventures, or contractors of equivalent Grade/class registered with Central Government/MES/Railways are eligible; The intending tenderer(s) should not have abandoned any work of similar nature, nor should their contract have been rescinded during the last five years.

What work experience is required?

As extracted from the DTCN: For works valued more than Rs 5.00 crores, the intending tenderer(s) should have executed similar nature of work worth 75% of the estimated cost put to tender during any three financial years taken together of the last preceding five years (2021-22 to 2025-26), excluding the current financial year 2026-27.

What is the completion period?

The period of work is 330 days, and bids must remain valid for 90 days.

Which department issued this tender?

This tender was issued by CE RW I, RWCIRCLE-SUNABEDA; the tender inviting authority is the Chief Construction Engineer.

What documents are required to submit a bid?

The DTCN lists 17 documents, including Cost of Tender Paper (online receipt), EMD (online receipt), Valid Registration Certificate, GSTIN, No Relationship Certificate (Schedule-A), Works Experience (Schedule-D1, D2), and 11 more.

RoadLive

Construction of H.L Bridge over Local Nallah on Sekram to Putkivalsa (PS Road) in the district of Koraput under SBY for the year 2025-26.

SUNABEDA, Koraput CE RW IRWCIRCLE-SUNABEDA

Tender ID 2026_CERWI_144669_1Ref CCERWCSBD-ONLINE-33/2026-27

Estimated value: ₹7.03 Cr
EMD: ₹7.04 L; Exemption available
Tender fee: ₹10.0K
Work period: 330 days

Closing in

13 days left

16 Nov 2026, 05:00 PM

About this tender

CE RW I has invited bids for “Construction of H.L Bridge over Local Nallah on Sekram to Putkivalsa (PS Road) in the district of Koraput under SBY for the year 2025-26.” in SUNABEDA, Koraput district, Odisha. The estimated tender value is ₹7.03 crore and the completion period is 330 days. Bids must be submitted by 16 Nov 2026, 05:00 PM.

Bid readiness

Based on the tender, not your profile

Done: Tender is currently open
Done: BOQ available · 47 items
Done: DTCN analysed · 46 requirements extracted
Done: 17 required documents identified
Needs review: Experience requirement needs review
Needs review: Financial requirements need review

Review requirements

Important dates

All times IST, as published on the portal

Published30 Oct 2026, 11:00 AM
Document downloadUntil 16 Nov 2026
Submission deadline· 13 days left16 Nov 2026, 05:00 PM
Bid opening17 Nov 2026, 11:00 AM

Tender intelligence

Eligibility & bid requirements

DTCN analysed46 requirements extracted17 documents identifiedExtracted from the official tender document

This tender is for bridge construction works in Odisha, invited by the Chief Construction Engineer, Rural Works Circle, Sunabeda. It uses a percentage rate bid system and requires online submission. Contractors need to meet specific eligibility criteria including work experience, annual turnover, and possession of key machinery, with a bid validity period of 90 days. The tender involves a two-cover system for technical and financial bids.

Eligibility

6 items

Contractors registered with State Governments (as per Contract Data Sl 7.A), Joint Ventures, or contractors of equivalent Grade/class registered with Central Government/MES/Railways are eligible.
The intending tenderer(s) should not have abandoned any work of similar nature, nor should their contract have been rescinded during the last five years.
Tenderer(s) must have a valid Registration Certificate of the required class as mentioned in Col-6 of the Table in NIT.

Show 3 more

Tenderer(s) must have an up-to-date GSTIN Certificate and possess a PAN CARD.
Joint Ventures are allowed for works value exceeding Rs 10.00 crore, with not more than three constituents, and the lead partner must be a registered Contractor of appropriate class of the State.
Individual registered Contractors belonging to Schedule Caste and Schedule Tribe having Registration Certificate up to 'B' Class are eligible for 10% price preference.

Source: Original DTCNView source document

Experience

1 item

For works valued more than Rs 5.00 crores, the intending tenderer(s) should have executed similar nature of work worth 75% of the estimated cost put to tender during any three financial years taken together of the last preceding five years (2021-22 to 2025-26), excluding the current financial year 2026-27.

Source: Original DTCNView source document

Financial

8 items

For works valued more than Rs 5.00 crores, the intending tenderer(s) should have a total financial turnover in respect of Civil Engineering works of an amount not less than the amount put to tender during any 3 financial years taken together of the last preceding five financial years (2021-22 to 2025-26), excluding the current financial year 2026-27.
The available bid capacity at the expected time of bidding must be more than the total estimated cost of the works.
EMD is 1% of the estimated cost, to be remitted online; failure to do so will result in bid rejection.

Show 5 more

Additional Performance Security will be required from the successful bidder if the bid amount is less than the estimated cost put to tender, with varying percentages based on the bid price deviation.
The prevailing percentage of I.T. Department towards income tax will be deducted from the contractor’s bill.
Prevailing rate of TDS on GST will be deducted from the contractor’s bill.
CESS @ 1% of the amount of each bill shall be proportionately deducted from the Contractor’s bill.
The security deposit will be refunded after two years of completion of the work and payment of the final bill and will not carry any interest.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

20 items

Contractors must furnish a certificate stating no relation to any officer in the rank of Assistant Engineer & above in the state R.D. Deptt. or Assistant/Under Secretary & above in the R.D. Department.
Contractors must possess specific machineries (Hydraulic Excavator, Vibratory Roller, Self-loading Concrete Mixer with batch mix arrangement, Generator – 33 KVA) for Open foundation bridges.
For Well foundation bridges, additional machinery includes a Crawler Crane.

Show 17 more

For Pile foundation bridges, additional machinery includes a Piling Rig with Bentonite Pump.
Proof of ownership or lease for required tools and plants and machineries must be furnished.
If machinery is deployed on other works, a time schedule for movement and a certificate from the Executive Engineer (not more than 90 days old) are required.
Hired/leased equipment must have proof of ownership from the provider and contracts/agreements/lease deeds on a long-term basis for a minimum period equal to the completion period plus 90 days.
Super class contractors shall employ two Graduate Engineers and two Diploma holders from Odisha.
Special class contractors shall employ one Graduate Engineer and two Diploma holders from Odisha.
'A' class contractors shall employ one Graduate Engineer or two Diploma holders from Odisha.
The contractor must arrange adequate lighting arrangement for the work wherever necessary at his own cost.
Steel shuttering & centering shall be used, lined with suitable sheeting, and made leak-proof and watertight.
Concrete should be machine mixed unless otherwise ordered, and the contractor must arrange their own concrete mixer, vibrator, and pumps.
Cement shall be used by bags, with one bag weighing 50 Kg.
The contractor must arrange materials like Steel, Cement, paint, and bitumen of approved quality and specification at their own cost.
The contractor must procure and store explosives required for blasting operations.
The contractor has to conduct their own boring before starting the work and get samples tested at their own cost to ascertain SBC and credibility of strata at founding level.
Concrete test specimens (150mm × 150mm × 150mm) must be taken for each structural member and tested in Departmental Quality Control and Research Laboratory at Cuttack or Bhubaneswar.
The construction of well steining by injecting cement or grout in coarse aggregate placed in position shall not be permitted.
For concreting bottom plugs of wells, concrete should be provided with tremie or other approved methods, using 10% extra cement for underwater concreting without extra cost.

Source: Original DTCNView source document

Contract conditions

11 items

The work is to be completed within the time period specified in Sl.8 of the Contract Data.
All bids received will remain valid for a period of 90 days after the deadline date for submission of bids.
If the L1 bidder does not turn up for agreement after finalization, they shall be debarred from participation in bidding for three years and blacklisted.

Show 8 more

The minimum period of blocking of Portal Registration for non-compliance shall be no less than 180 days.
GST as applicable on works contract shall be paid over the bill amount at the time of payment.
The contractor is required to pay royalty, EMF, DMF & additional charges as applicable to Govt. towards use of minor minerals.
No interest is chargeable for the dues or additional dues payable for the work.
The defect liability period for the work is 24 calendar months from the date of successful completion of the work.
Price adjustment for increase or decrease in rates and price of labour, materials, fuels, and lubricants will apply for work done from the start date up to the initial intended completion date or approved extensions.
The contractor is responsible for making good all injuries, damages, and repairs occasioned by fire or other causes and holds the Govt. of Odisha harmless for claims for injuries or structural damage due to neglect or misconduct.
No claim shall be entertained for loss due to earthquake, flood, cyclone, epidemic, riot, or any other calamity; such damages must be made good by the contractor at their own cost.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Bill of quantities

47 priced items · ₹7.03 Cr (₹7,03,05,857)

Download BOQ file

Major components

Share of BOQ amount, grouped by item description

Reinforcement steel29%₹2.02 Cr
Concrete & RCC20%₹1.39 Cr
Doors, windows & steelwork14%₹95.04 L
Road & bituminous work9%₹64.31 L
Flooring & tiling2%₹11.57 L
Earthwork & excavation1%₹3.78 L

Largest items

By amount

Supply of HYSD bars confirming to grade S-415 cutting bending, binding, lapping, splicing, welding etc. (conf…Item 24 · 1,782.07 qtl₹1.61 Cr
Super structureItem 21 · 333.32 cum₹99.11 L
Plain Cement Concrete M 20 Grade using 20mm down graded chips in superstructure WELL STEININGItem 12 · 451.9 cum₹44.55 L
Supplying & fitting fixing in position steel cutting edge as per approved design & drawing weighing not less…Item 2 · 383.04 mtr₹43.49 L
Providing, laying, spreading & compacting graded stone aggregate to Wet Mix Macadam specification including p…Item 43 · 1,260 cum₹38.93 L

Tender details

Tender reference: CCERWCSBD-ONLINE-33/2026-27
Tender ID: 2026_CERWI_144669_1
District: Koraput
Location: SUNABEDA
Tender type: National Competitive Bid
Tender category: Works
Period of work: 330 days

Show all 9 fields

Product category: Civil Works - Bridges
Pincode: 763001

Authority

State
Government of Odisha
Department
CE RW I
Organisation
RWCIRCLE-SUNABEDA
Inviting authority
Chief Construction Engineer

All CE RW I tenders in Koraput →

Costs

Estimated value: ₹7,03,06,000; ₹7.03 crore
EMD / bid security: ₹7,04,000; Exemption available for eligible bidders
Tender fee: ₹10,000; Cost of bid document

Bid validity: 90 days

Security & deductions from the DTCN (6)

EMD is 1% of the estimated cost, to be remitted online; failure to do so will result in bid rejection.
Additional Performance Security will be required from the successful bidder if the bid amount is less than the estimated cost put to tender, with varying percentages based on the bid price deviation.
The prevailing percentage of I.T. Department towards income tax will be deducted from the contractor’s bill.
Prevailing rate of TDS on GST will be deducted from the contractor’s bill.
CESS @ 1% of the amount of each bill shall be proportionately deducted from the Contractor’s bill.
The security deposit will be refunded after two years of completion of the work and payment of the final bill and will not carry any interest.

Source: Original DTCN

Frequently asked questions

About this tender

Eligibility & bid requirements

DTCN analysed46 requirements extracted17 documents identifiedExtracted from the official tender document

Eligibility

6 items

Contractors registered with State Governments (as per Contract Data Sl 7.A), Joint Ventures, or contractors of equivalent Grade/class registered with Central Government/MES/Railways are eligible.
The intending tenderer(s) should not have abandoned any work of similar nature, nor should their contract have been rescinded during the last five years.
Tenderer(s) must have a valid Registration Certificate of the required class as mentioned in Col-6 of the Table in NIT.

Show 3 more

Tenderer(s) must have an up-to-date GSTIN Certificate and possess a PAN CARD.
Joint Ventures are allowed for works value exceeding Rs 10.00 crore, with not more than three constituents, and the lead partner must be a registered Contractor of appropriate class of the State.
Individual registered Contractors belonging to Schedule Caste and Schedule Tribe having Registration Certificate up to 'B' Class are eligible for 10% price preference.

Source: Original DTCNView source document

Experience

1 item

For works valued more than Rs 5.00 crores, the intending tenderer(s) should have executed similar nature of work worth 75% of the estimated cost put to tender during any three financial years taken together of the last preceding five years (2021-22 to 2025-26), excluding the current financial year 2026-27.

Source: Original DTCNView source document

Financial

8 items

For works valued more than Rs 5.00 crores, the intending tenderer(s) should have a total financial turnover in respect of Civil Engineering works of an amount not less than the amount put to tender during any 3 financial years taken together of the last preceding five financial years (2021-22 to 2025-26), excluding the current financial year 2026-27.
The available bid capacity at the expected time of bidding must be more than the total estimated cost of the works.
EMD is 1% of the estimated cost, to be remitted online; failure to do so will result in bid rejection.

Show 5 more

Additional Performance Security will be required from the successful bidder if the bid amount is less than the estimated cost put to tender, with varying percentages based on the bid price deviation.
The prevailing percentage of I.T. Department towards income tax will be deducted from the contractor’s bill.
Prevailing rate of TDS on GST will be deducted from the contractor’s bill.
CESS @ 1% of the amount of each bill shall be proportionately deducted from the Contractor’s bill.
The security deposit will be refunded after two years of completion of the work and payment of the final bill and will not carry any interest.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

20 items

Contractors must furnish a certificate stating no relation to any officer in the rank of Assistant Engineer & above in the state R.D. Deptt. or Assistant/Under Secretary & above in the R.D. Department.
Contractors must possess specific machineries (Hydraulic Excavator, Vibratory Roller, Self-loading Concrete Mixer with batch mix arrangement, Generator – 33 KVA) for Open foundation bridges.
For Well foundation bridges, additional machinery includes a Crawler Crane.

Show 17 more

For Pile foundation bridges, additional machinery includes a Piling Rig with Bentonite Pump.
Proof of ownership or lease for required tools and plants and machineries must be furnished.
If machinery is deployed on other works, a time schedule for movement and a certificate from the Executive Engineer (not more than 90 days old) are required.
Hired/leased equipment must have proof of ownership from the provider and contracts/agreements/lease deeds on a long-term basis for a minimum period equal to the completion period plus 90 days.
Super class contractors shall employ two Graduate Engineers and two Diploma holders from Odisha.
Special class contractors shall employ one Graduate Engineer and two Diploma holders from Odisha.
'A' class contractors shall employ one Graduate Engineer or two Diploma holders from Odisha.
The contractor must arrange adequate lighting arrangement for the work wherever necessary at his own cost.
Steel shuttering & centering shall be used, lined with suitable sheeting, and made leak-proof and watertight.
Concrete should be machine mixed unless otherwise ordered, and the contractor must arrange their own concrete mixer, vibrator, and pumps.
Cement shall be used by bags, with one bag weighing 50 Kg.
The contractor must arrange materials like Steel, Cement, paint, and bitumen of approved quality and specification at their own cost.
The contractor must procure and store explosives required for blasting operations.
The contractor has to conduct their own boring before starting the work and get samples tested at their own cost to ascertain SBC and credibility of strata at founding level.
Concrete test specimens (150mm × 150mm × 150mm) must be taken for each structural member and tested in Departmental Quality Control and Research Laboratory at Cuttack or Bhubaneswar.
The construction of well steining by injecting cement or grout in coarse aggregate placed in position shall not be permitted.
For concreting bottom plugs of wells, concrete should be provided with tremie or other approved methods, using 10% extra cement for underwater concreting without extra cost.

Source: Original DTCNView source document

Contract conditions

11 items

The work is to be completed within the time period specified in Sl.8 of the Contract Data.
All bids received will remain valid for a period of 90 days after the deadline date for submission of bids.
If the L1 bidder does not turn up for agreement after finalization, they shall be debarred from participation in bidding for three years and blacklisted.

Show 8 more

The minimum period of blocking of Portal Registration for non-compliance shall be no less than 180 days.
GST as applicable on works contract shall be paid over the bill amount at the time of payment.
The contractor is required to pay royalty, EMF, DMF & additional charges as applicable to Govt. towards use of minor minerals.
No interest is chargeable for the dues or additional dues payable for the work.
The defect liability period for the work is 24 calendar months from the date of successful completion of the work.
Price adjustment for increase or decrease in rates and price of labour, materials, fuels, and lubricants will apply for work done from the start date up to the initial intended completion date or approved extensions.
The contractor is responsible for making good all injuries, damages, and repairs occasioned by fire or other causes and holds the Govt. of Odisha harmless for claims for injuries or structural damage due to neglect or misconduct.
No claim shall be entertained for loss due to earthquake, flood, cyclone, epidemic, riot, or any other calamity; such damages must be made good by the contractor at their own cost.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Costs

Estimated value

₹7,03,06,000

₹7.03 crore

EMD / bid security

₹7,04,000

Exemption available for eligible bidders

Tender fee

₹10,000

Cost of bid document

Bid validity: 90 days

Security & deductions from the DTCN (6)

EMD is 1% of the estimated cost, to be remitted online; failure to do so will result in bid rejection.
Additional Performance Security will be required from the successful bidder if the bid amount is less than the estimated cost put to tender, with varying percentages based on the bid price deviation.
The prevailing percentage of I.T. Department towards income tax will be deducted from the contractor’s bill.
Prevailing rate of TDS on GST will be deducted from the contractor’s bill.
CESS @ 1% of the amount of each bill shall be proportionately deducted from the Contractor’s bill.
The security deposit will be refunded after two years of completion of the work and payment of the final bill and will not carry any interest.

Source: Original DTCN

Frequently asked questions

Construction of H.L Bridge over Local Nallah on Sekram to Putkivalsa (PS Road) in the district of Koraput under SBY for the year 2025-26.

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

Construction of H.L Bridge over Local Nallah on Sekram to Putkivalsa (PS Road) in the district of Koraput under SBY for the year 2025-26.

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more