What is the last date to bid for this tender?

Bids must be submitted on the Odisha eProcurement portal (tendersodisha.gov.in) by 30 Oct 2026, 05:00 PM. Bids are scheduled to open on 31 Oct 2026, 11:00 AM.

What is the estimated value of this tender?

The estimated tender value is ₹14.40 L (₹14,40,316).

How much EMD is required?

The EMD (bid security) is ₹14.5K (₹14,500). The portal lists EMD exemption as available for eligible bidders — check the DTCN for who qualifies.

What work experience is required?

As extracted from the DTCN: Non-Civil Engineer contractors must deploy at least one experienced Civil Engineer with a Diploma or Degree from an AICTE-recognized institute and a minimum of two years post-qualification experience in civil engineering survey, monitoring, quality control, or construction.

What is the completion period?

The period of work is 75 days, and bids must remain valid for 120 days.

Which department issued this tender?

This tender was issued by Municipal Bodies, Bhubaneswar Municipal Corporation; the tender inviting authority is the Executive Engineer (Central Tender Cell).

What documents are required to submit a bid?

The DTCN lists 17 documents, including Cost of Bid Document (Online remittance), Earnest Money Deposit (EMD) (Online remittance), Valid Registration Certificate, Valid GST Registration Certificate & GSTIN, PAN Card, No Relationship Certificate (Non-Judicial Stamp Paper), and 11 more.

DrainageClosed

Construction of drain from BMC Kalyan Mandap to IVR-73, Unit-6 in Ward No. 46

Q: Who can bid for this tender?

The DTCN states: Contractors must be of "D", "C", or "B" Class as specified for each work; Contractors must be registered with the Odisha State Government or equivalent grade/class registered with Central Government/any other State Government/MES/Railways.

BMC AREA, Khordha Municipal BodiesBhubaneswar Municipal Corporation

Tender ID 2026_ORULB_143600_15Ref BMC-EE-Tender Cell-82/2026-27 dt. 13.10.2026

Estimated value: ₹14.40 L
EMD: ₹14.5K; Exemption available
Tender fee: ₹6.0K
Work period: 75 days

Bid submission

Closed

Closed on 30 Oct 2026, 05:00 PM

Bid submission for this tender has closed. Browse closed tenders in the archive →

About this tender

Municipal Bodies has invited bids for “Construction of drain from BMC Kalyan Mandap to IVR-73, Unit-6 in Ward No. 46” in BMC AREA, Khordha district, Odisha. The estimated tender value is ₹14.40 lakh and the completion period is 75 days. Bids must be submitted by 30 Oct 2026, 05:00 PM.

Bid readiness

Based on the tender, not your profile

Not available: Bid submission has closed
Done: BOQ available · 8 items
Done: DTCN analysed · 42 requirements extracted
Done: 17 required documents identified
Needs review: Experience requirement needs review
Needs review: Financial requirements need review

Review requirements

Important dates

All times IST, as published on the portal

Published17 Oct 2026, 10:30 AM
Document downloadUntil 30 Oct 2026
Submission deadline30 Oct 2026, 05:00 PM
Bid opening31 Oct 2026, 11:00 AM

Tender intelligence

Eligibility & bid requirements

DTCN analysed42 requirements extracted17 documents identifiedExtracted from the official tender document

Bhubaneswar Municipal Corporation invites percentage rate bids for 28 civil construction/repair works, with estimated costs ranging from Rs. 8.47 Lakhs to Rs. 46.60 Lakhs. The works are open to "D", "C", and "B" Class contractors registered with the Odisha State Government or equivalent. Bidders must submit an Earnest Money Deposit (EMD) of 1% of the estimated cost and complete works within 60 to 180 calendar days.

Eligibility

5 items

Contractors must be of "D", "C", or "B" Class as specified for each work.
Contractors must be registered with the Odisha State Government or equivalent grade/class registered with Central Government/any other State Government/MES/Railways.
Bidders must possess an up-to-date compatible Digital Signature Certificate.

Show 2 more

Contractors registered elsewhere but not with the Government of Odisha must register with the appropriate state authority before work award/agreement signing.
Bidders must not be undergoing Corporate Debt Restructuring (CDR)/Strategic Debt Restructuring (SDR), facing recovery proceedings from Financial Institutions, or declared 'Sick' by BIFR.

Source: Original DTCNView source document

Experience

1 item

Non-Civil Engineer contractors must deploy at least one experienced Civil Engineer with a Diploma or Degree from an AICTE-recognized institute and a minimum of two years post-qualification experience in civil engineering survey, monitoring, quality control, or construction.

Source: Original DTCNView source document

Financial

12 items

SC/ST contractors up to "B" Class may deposit Security Deposit (EMD, initial security, and Performance Security) at half the usual rate.
Bidders eligible for EMD exemption must submit documentary evidence with their online bid.
Each intending bidder must furnish EMD at 1% of the Estimated Cost.

Show 9 more

The successful bidder must furnish Initial Security Deposit (ISD) of not less than 2% of the accepted tender value within 7 days of the Letter of Acceptance (LoA).
ISD can be in the form of NSC/Postal Saving Pass Book/Post Office Time Deposit/Kishan Vikash Patra/Deposit Receipt in Schedule Bank or Bank Guarantee.
Additional Performance Security (APS) is required if the accepted bid price is lower than the Cost Put to Tender, calculated incrementally based on the percentage difference.
The APS must be deposited within 7 days from the date of communication to the bidder.
The APS can be in the form of Insurance Surety Bond, Account Payee Demand Draft, Fixed Deposit Receipt, Bank Guarantee, or Online Payment.
The Bank Guarantee for APS must remain valid at least one month after the expiry of the stipulated completion date and Defect Liability Period.
Failure to submit APS, Performance Security, and sign the agreement within the prescribed time will lead to LoA cancellation and other actions.
5% of each bill amount will be withheld by BMC towards performance security.
The contractor shall not subcontract/sublet the work; doing so will result in contract rescission and forfeiture of EMD, ISD, and penalties.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

13 items

Bidders must possess or have a lease/hire agreement for tools, plants, equipment, and machinery as per Schedule-A.
Successful bidders (unless Civil Engineer Contractors) must deploy at least one experienced Civil Engineer at the work site full-time.
The deployed Civil Engineer must hold a Diploma or Degree in Civil Engineering from an AICTE-recognized institute.

Show 10 more

The Civil Engineer must have at least two years of post-qualification experience in civil engineering survey, monitoring, quality control, or construction.
Bidders must ensure possession or lease/hire of tools, plants, equipment, and machinery as per Schedule-A.
The contractor shall provide all materials required for the work, conforming to relevant BIS specifications and Codes of Practices.
The contractor shall facilitate quality tests through Government or Government authorized laboratories, coordinating sample collection, preservation, handling, and testing.
For paver blocks/kerb stones, quality certificates from the manufacturer for each consignment are required.
For concrete roads, slump cone tests, compressive strength tests (7 & 28 days), core cutting tests, and sieve analysis of coarse aggregates (for PCC) are required.
For Ready Mix Concrete, a test certificate detailing mix proportions, cement type, admixtures, and concrete grade is required for each project.
For asphalt roads, quality and grade of bitumen certificates, bitumen content tests, temperature tests of bitumen mixed aggregate, and core tests for density and thickness are required.
For sub-base, compaction/density tests, sieve analysis of coarse aggregate, and CBR or Los Angeles Abrasion Tests are required.
The contractor shall engage qualified and experienced Resident Engineer(s) and Assistant(s) to the satisfaction of BMC.

Source: Original DTCNView source document

Contract conditions

11 items

The period of completion ranges from 60 to 180 calendar days.
The successful bidder must submit a work program and sign the agreement within 7 days of the LoA.
Bids where the percentage rate quoted is lower than or equal to 15% less than the estimated cost will be rejected.

Show 8 more

If more than one bid is quoted at 14.99% less, the tender will be finalized through a transparent lottery system.
The EMDs of unsuccessful bidders (except the 2nd lowest) will be refunded within 30 days of financial bid opening.
The contractor shall bear all Taxes, Duties, Levies, Cess, Entry Tax, Income Tax, Royalties, Fair Weather Charges, and Tollages.
The total amount of compensation for delay in completion shall not exceed 10% of the Tendered Value of work, computed at 1.50% per month on a per-day basis.
The contractor shall be liable for penalties for bad/sub-standard work, including rectification, removal, dismantling, and reconstruction at no extra cost.
Blacklisting may occur for misbehavior, tender fixing, non-achievement of milestones, violation of contract conditions, jeopardizing state security, or submitting false documents.
The contract validity period for each received bid is 120 days from the date of opening.
The jurisdiction for legal disputes is within the State of Odisha.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Bill of quantities

8 priced items · ₹14.40 L (₹14,40,316)

Download BOQ file

Major components

Share of BOQ amount, grouped by item description

Concrete & RCC89%₹12.87 L
Earthwork & excavation2%₹34.4K
Other items8%₹1.19 L

Largest items

By amount

R.C.C. work of M35 grade pre-cast concrete including Hoisting & layingItem 6 · 60.75 cum₹11.84 L
C:C: (1:4:8) using 4 cm. size H.G. metal (C.B) including the cost of all materials, labour etc complete.Item 5 · 19.85 cum₹1.16 L
R.C.C. work of M20 grade with 20 mm down grade chips (C.B.) including Hoisting & layingItem 7 · 8.46 cum₹52.5K
Dismantlling and removing cement concrete including stacking the useful materials for re-use and removing the…Item 1 · 57.38 cum₹50.3K
Carriage of Excavated earth by mechanical means with in 5km lead including loading and unloading with all cos…Item 3 · 87.8 cum₹14.1K

Tender details

Tender reference: BMC-EE-Tender Cell-82/2026-27 dt. 13.10.2026
Tender ID: 2026_ORULB_143600_15
District: Khordha
Location: BMC AREA
Tender type: Open Tender
Tender category: Works
Period of work: 75 days

Show all 9 fields

Product category: Civil Works - Others
Pincode: 751022

Authority

State
Government of Odisha
Department
Municipal Bodies
Body
Bhubaneswar Municipal Corporation
Inviting authority
Executive Engineer (Central Tender Cell)

All Municipal Bodies tenders in Khordha →

Costs

Estimated value: ₹14,40,316; ₹14.40 lakh
EMD / bid security: ₹14,500; Exemption available for eligible bidders
Tender fee: ₹6,000; Cost of bid document

Bid validity: 120 days

Security & deductions from the DTCN (12)

SC/ST contractors up to "B" Class may deposit Security Deposit (EMD, initial security, and Performance Security) at half the usual rate.
Bidders eligible for EMD exemption must submit documentary evidence with their online bid.
Each intending bidder must furnish EMD at 1% of the Estimated Cost.
The successful bidder must furnish Initial Security Deposit (ISD) of not less than 2% of the accepted tender value within 7 days of the Letter of Acceptance (LoA).
ISD can be in the form of NSC/Postal Saving Pass Book/Post Office Time Deposit/Kishan Vikash Patra/Deposit Receipt in Schedule Bank or Bank Guarantee.
Additional Performance Security (APS) is required if the accepted bid price is lower than the Cost Put to Tender, calculated incrementally based on the percentage difference.
The APS must be deposited within 7 days from the date of communication to the bidder.
The APS can be in the form of Insurance Surety Bond, Account Payee Demand Draft, Fixed Deposit Receipt, Bank Guarantee, or Online Payment.
The Bank Guarantee for APS must remain valid at least one month after the expiry of the stipulated completion date and Defect Liability Period.
Failure to submit APS, Performance Security, and sign the agreement within the prescribed time will lead to LoA cancellation and other actions.
5% of each bill amount will be withheld by BMC towards performance security.
The contractor shall not subcontract/sublet the work; doing so will result in contract rescission and forfeiture of EMD, ISD, and penalties.

Source: Original DTCN

Frequently asked questions

Eligibility & bid requirements

DTCN analysed42 requirements extracted17 documents identifiedExtracted from the official tender document

Eligibility

5 items

Contractors must be of "D", "C", or "B" Class as specified for each work.
Contractors must be registered with the Odisha State Government or equivalent grade/class registered with Central Government/any other State Government/MES/Railways.
Bidders must possess an up-to-date compatible Digital Signature Certificate.

Show 2 more

Contractors registered elsewhere but not with the Government of Odisha must register with the appropriate state authority before work award/agreement signing.
Bidders must not be undergoing Corporate Debt Restructuring (CDR)/Strategic Debt Restructuring (SDR), facing recovery proceedings from Financial Institutions, or declared 'Sick' by BIFR.

Source: Original DTCNView source document

Experience

1 item

Non-Civil Engineer contractors must deploy at least one experienced Civil Engineer with a Diploma or Degree from an AICTE-recognized institute and a minimum of two years post-qualification experience in civil engineering survey, monitoring, quality control, or construction.

Source: Original DTCNView source document

Financial

12 items

SC/ST contractors up to "B" Class may deposit Security Deposit (EMD, initial security, and Performance Security) at half the usual rate.
Bidders eligible for EMD exemption must submit documentary evidence with their online bid.
Each intending bidder must furnish EMD at 1% of the Estimated Cost.

Show 9 more

The successful bidder must furnish Initial Security Deposit (ISD) of not less than 2% of the accepted tender value within 7 days of the Letter of Acceptance (LoA).
ISD can be in the form of NSC/Postal Saving Pass Book/Post Office Time Deposit/Kishan Vikash Patra/Deposit Receipt in Schedule Bank or Bank Guarantee.
Additional Performance Security (APS) is required if the accepted bid price is lower than the Cost Put to Tender, calculated incrementally based on the percentage difference.
The APS must be deposited within 7 days from the date of communication to the bidder.
The APS can be in the form of Insurance Surety Bond, Account Payee Demand Draft, Fixed Deposit Receipt, Bank Guarantee, or Online Payment.
The Bank Guarantee for APS must remain valid at least one month after the expiry of the stipulated completion date and Defect Liability Period.
Failure to submit APS, Performance Security, and sign the agreement within the prescribed time will lead to LoA cancellation and other actions.
5% of each bill amount will be withheld by BMC towards performance security.
The contractor shall not subcontract/sublet the work; doing so will result in contract rescission and forfeiture of EMD, ISD, and penalties.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

13 items

Bidders must possess or have a lease/hire agreement for tools, plants, equipment, and machinery as per Schedule-A.
Successful bidders (unless Civil Engineer Contractors) must deploy at least one experienced Civil Engineer at the work site full-time.
The deployed Civil Engineer must hold a Diploma or Degree in Civil Engineering from an AICTE-recognized institute.

Show 10 more

The Civil Engineer must have at least two years of post-qualification experience in civil engineering survey, monitoring, quality control, or construction.
Bidders must ensure possession or lease/hire of tools, plants, equipment, and machinery as per Schedule-A.
The contractor shall provide all materials required for the work, conforming to relevant BIS specifications and Codes of Practices.
The contractor shall facilitate quality tests through Government or Government authorized laboratories, coordinating sample collection, preservation, handling, and testing.
For paver blocks/kerb stones, quality certificates from the manufacturer for each consignment are required.
For concrete roads, slump cone tests, compressive strength tests (7 & 28 days), core cutting tests, and sieve analysis of coarse aggregates (for PCC) are required.
For Ready Mix Concrete, a test certificate detailing mix proportions, cement type, admixtures, and concrete grade is required for each project.
For asphalt roads, quality and grade of bitumen certificates, bitumen content tests, temperature tests of bitumen mixed aggregate, and core tests for density and thickness are required.
For sub-base, compaction/density tests, sieve analysis of coarse aggregate, and CBR or Los Angeles Abrasion Tests are required.
The contractor shall engage qualified and experienced Resident Engineer(s) and Assistant(s) to the satisfaction of BMC.

Source: Original DTCNView source document

Contract conditions

11 items

The period of completion ranges from 60 to 180 calendar days.
The successful bidder must submit a work program and sign the agreement within 7 days of the LoA.
Bids where the percentage rate quoted is lower than or equal to 15% less than the estimated cost will be rejected.

Show 8 more

If more than one bid is quoted at 14.99% less, the tender will be finalized through a transparent lottery system.
The EMDs of unsuccessful bidders (except the 2nd lowest) will be refunded within 30 days of financial bid opening.
The contractor shall bear all Taxes, Duties, Levies, Cess, Entry Tax, Income Tax, Royalties, Fair Weather Charges, and Tollages.
The total amount of compensation for delay in completion shall not exceed 10% of the Tendered Value of work, computed at 1.50% per month on a per-day basis.
The contractor shall be liable for penalties for bad/sub-standard work, including rectification, removal, dismantling, and reconstruction at no extra cost.
Blacklisting may occur for misbehavior, tender fixing, non-achievement of milestones, violation of contract conditions, jeopardizing state security, or submitting false documents.
The contract validity period for each received bid is 120 days from the date of opening.
The jurisdiction for legal disputes is within the State of Odisha.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Costs

Estimated value

₹14,40,316

₹14.40 lakh

EMD / bid security

₹14,500

Exemption available for eligible bidders

Tender fee

₹6,000

Cost of bid document

Bid validity: 120 days

Security & deductions from the DTCN (12)

SC/ST contractors up to "B" Class may deposit Security Deposit (EMD, initial security, and Performance Security) at half the usual rate.
Bidders eligible for EMD exemption must submit documentary evidence with their online bid.
Each intending bidder must furnish EMD at 1% of the Estimated Cost.
The successful bidder must furnish Initial Security Deposit (ISD) of not less than 2% of the accepted tender value within 7 days of the Letter of Acceptance (LoA).
ISD can be in the form of NSC/Postal Saving Pass Book/Post Office Time Deposit/Kishan Vikash Patra/Deposit Receipt in Schedule Bank or Bank Guarantee.
Additional Performance Security (APS) is required if the accepted bid price is lower than the Cost Put to Tender, calculated incrementally based on the percentage difference.
The APS must be deposited within 7 days from the date of communication to the bidder.
The APS can be in the form of Insurance Surety Bond, Account Payee Demand Draft, Fixed Deposit Receipt, Bank Guarantee, or Online Payment.
The Bank Guarantee for APS must remain valid at least one month after the expiry of the stipulated completion date and Defect Liability Period.
Failure to submit APS, Performance Security, and sign the agreement within the prescribed time will lead to LoA cancellation and other actions.
5% of each bill amount will be withheld by BMC towards performance security.
The contractor shall not subcontract/sublet the work; doing so will result in contract rescission and forfeiture of EMD, ISD, and penalties.

Source: Original DTCN

Frequently asked questions

Construction of drain from BMC Kalyan Mandap to IVR-73, Unit-6 in Ward No. 46

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

Construction of drain from BMC Kalyan Mandap to IVR-73, Unit-6 in Ward No. 46

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more