What is the last date to bid for this tender?

Bids must be submitted on the Odisha eProcurement portal (tendersodisha.gov.in) by 11 Nov 2026, 05:00 PM. Bids are scheduled to open on 12 Nov 2026, 11:00 AM.

What is the estimated value of this tender?

The estimated tender value is ₹7.97 Cr (₹7,96,85,000).

How much EMD is required?

The EMD (bid security) is ₹7.97 L (₹7,96,850). The portal lists EMD exemption as available for eligible bidders — check the DTCN for who qualifies.

Who can bid for this tender?

The DTCN states: Contractors must not have abandoned any work of similar nature or had their contract rescinded during the last five years; Contractors must not be related to any officer in the rank of Assistant Engineer & above in the state R.D. Department or Assistant/Under Secretary & above in the R.D. Department.

What work experience is required?

As extracted from the DTCN: For works value exceeding Rs. 5.00 crores, bidders must demonstrate annual turnover, bid capacity, and works experience as per clauses 1(g), (f)(ii) & (i) in aggregate; Intending tenderers should have executed works (Buildings/Bridges/Major Irrigation Structures) worth 50% of the estimated cost put to tender during any 3 financial years taken together of the last preceding 8 years, certified by an officer not below the rank of Superintending Engineer or equivalent.

What is the completion period?

The period of work is 365 days, and bids must remain valid for 90 days.

Which department issued this tender?

This tender was issued by CE RW I, RWCIRCLE-BALANGIR; the tender inviting authority is the Chief Construction Engineer, R.W.Circle, Bolangir.

What documents are required to submit a bid?

The DTCN lists 13 documents, including Scanned copies of documents in PDF format, Online transfer receipt for tender paper cost, Online transfer receipt for EMD, GSTIN, PAN Card, Registration Certificate, and 7 more.

BuildingLive

Construction and Renovation of DIET Building at Sonepur in the district of Subarnapur for the year 2026-27

Sonepur CE RW IRWCIRCLE-BALANGIR

Tender ID 2026_CERWI_144697_1Ref BLGR-Online 26/2026-27

Estimated value: ₹7.97 Cr
EMD: ₹7.97 L; Exemption available
Tender fee: ₹10.0K
Work period: 365 days

Closing in

9 days left

11 Nov 2026, 05:00 PM

About this tender

CE RW I has invited bids for “Construction and Renovation of DIET Building at Sonepur in the district of Subarnapur for the year 2026-27” in Sonepur district, Odisha. The estimated tender value is ₹7.97 crore and the completion period is 365 days. Bids must be submitted by 11 Nov 2026, 05:00 PM.

Bid readiness

Based on the tender, not your profile

Done: Tender is currently open
Done: BOQ available · 336 items
Done: DTCN analysed · 64 requirements extracted
Done: 13 required documents identified
Needs review: Experience requirement needs review
Needs review: Financial requirements need review

Review requirements

Important dates

All times IST, as published on the portal

Published30 Oct 2026, 01:00 PM
Document downloadUntil 11 Nov 2026
Submission deadline· 9 days left11 Nov 2026, 05:00 PM
Bid opening12 Nov 2026, 11:00 AM

Tender intelligence

Eligibility & bid requirements

DTCN analysed64 requirements extracted13 documents identifiedExtracted from the official tender document

This tender from the Rural Development Department, Rural Works Organisation, Bolangir, Odisha, invites bids for three composite building works (Civil, E.I. & P.H.) in the Subarnapur district for the year 2026-27. The estimated costs range from Rs. 125.35 lakhs to Rs. 872.03 lakhs, with completion periods varying from 9 to 12 calendar months. Contractors must be registered with the Government of Odisha or equivalent, and bids are submitted online via www.tendersorissa.gov.in.

Eligibility

10 items

Contractors must not have abandoned any work of similar nature or had their contract rescinded during the last five years.
Contractors must not be related to any officer in the rank of Assistant Engineer & above in the state R.D. Department or Assistant/Under Secretary & above in the R.D. Department.
Contractors must possess a valid Registration Certificate of the required class as mentioned in the TCN.

Show 7 more

Contractors must upload PAN card and up-to-date GSTIN.
Civil Contractors must upload a notarized agreement with a registered Electrical Contractor along with their valid license, GSTIN & PAN.
For works value up to Rs. 5.00 crores, no qualifying criteria except clauses 1(a), (b), (c), (d) & (e) are required.
Registered bidders from outside Odisha can participate after Portal Enrolment but must register with the appropriate authority of the State Government before work award.
Joint Venture/Consortium agreements/M.O.Us are not allowed to participate.
Bidders from outside the state can participate without a GSTIN clearance certificate if they submit an affidavit stating they are not registered under the GSTIN Act and have no liability, but must produce the certificate before final contract award.
Bidders registered under other State Governments/MES/Railways/CPWD in equivalent rank may participate, but the successful bidder must register under the state PWD before signing the Agreement.

Source: Original DTCNView source document

Experience

2 items

For works value exceeding Rs. 5.00 crores, bidders must demonstrate annual turnover, bid capacity, and works experience as per clauses 1(g), (f)(ii) & (i) in aggregate.
Intending tenderers should have executed works (Buildings/Bridges/Major Irrigation Structures) worth 50% of the estimated cost put to tender during any 3 financial years taken together of the last preceding 8 years, certified by an officer not below the rank of Superintending Engineer or equivalent.

Source: Original DTCNView source document

Financial

8 items

The total financial turnover in respect of Civil Engineering works must be not less than the amount put to tender during any 3 financial years taken together of the last preceding five financial years, certified by a Chartered Accountant.
If any Bidder/Tenderer withdraws their bid before the said period or makes any modification, the earnest money shall be forfeited.
EMD required is 1% of the estimated cost, to be transferred online.

Show 5 more

Upon acceptance, the successful tenderer must deposit an initial security amount to make 2% of the accepted tender cost (including EMD) within 10 days and sign the agreement in PWD form-2.
Failure to deposit the initial security or sign the contract within the stipulated time will result in forfeiture of EMD and withdrawal of tender acceptance.
Additional Performance Security (APS) will be obtained from the successful bidder if the bid amount is less than the estimated cost, in shape of Term Deposit Receipt or Bank Guarantee, within seven days of LoA.
Failure to submit APS will lead to cancellation of bid, debarment for 180 days, and blacklisting proceedings.
The Earnest Money of unsuccessful tenderers will be credited after the tender is awarded to the successful tenderer and will not carry any interest.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

27 items

Special class contractors shall employ one Graduate Engineer and two Diploma Holders belonging to the state of Odisha.
A class contractors shall employ one Graduate Engineer or two Diploma Holders belonging to the State of Odisha.
Bidders must possess compatible Digital Signature Certificates (DSC) of the required Class.

Show 24 more

Tenderers are required to submit a detailed program of work along with the tender.
Contractor must arrange all materials, machinery, and T&P at site, including carriage and storing.
Cement to be used must be from approved types (Ordinary Portland, High strength ordinary Portland, Portland Slag) with prior Engineer approval.
Reinforcement/Tensioned steel must conform to specified IS standards (Fe 250, Fe 415, Fe 500).
Contractor must arrange cement (IDCOL, OCL L&T & SAIL, TISCO) and steel from approved manufacturers and get it tested and approved by the department before use.
All required machineries (Concrete Mixers, Vibrators, Road Rollers, Sheep foot rollers etc.) must be arranged by the contractor at their own cost.
All reinforced cement concrete work should conform to Odisha Detailed Standard Specification & should be of M. 150 and M. 200 equivalent to nominal proportion (1:2:4) (1:1/2:3).
Shuttering and centering shall be with seasoned sal wood planks lined with suitable setting or steel shuttering.
Cement concrete in roof slab, beams etc., must be machine mixed and vibrated.
Contractor must arrange for water supply for all works and make sanitary arrangements for labour camps at their own cost.
Contractor must arrange adequate lighting arrangement for night work whenever necessary at their own cost.
Contractor must arrange all requisite equipment for testing Building if found necessary and bear the entire cost.
Contractor must submit a list of works in hand, a list of T&P, and a list of works executed along with the tender.
Contractor must employ one or more Engineering Graduates or Diploma Engineers as apprentices for works costing Rs. 2.5 Lakhs or more, paying them not less than Rs. 2000/month (Graduate) and Rs. 1600/month (Diploma).
The names of employed engineering personnel must be intimated to the tender receiving authority along with the tender.
Each bill of Special 'A' class contractor shall be accompanied by an Employment Role of the Engineering personal together with a certificate from the Graduate Engineer or Diploma Holder.
Materials for PH portion (Sanitary fixtures, C.I. High Level Flushing Cisterns, H.C.I. Soil Waste Pipes, C.P. Bath Room Fittings, Brass Fittings, Gunmetal Valves, G.I. Pipes, Galvanised Iron fittings, Paints, Cast Iron Manhole cover frame, Stone Ware Pipes & Fittings, P.V.C. (S.W.R.) & P.V.C (Rigid.) Pipe/Fittings) must be of specified brands and conform to ISI standards.
Building materials (Bricks, Cement Mortar, Cement, Sand, Coarse Aggregates, Reinforcements) must meet specified quality and IS standards.
For piling work, concrete must be as per specifications for cement concrete and of grade specified on drawings, with minimum cement quantity as per IS 2911 (Part-III).
Reinforcement for piling work must be as per specifications for cement concrete and of grade specified on drawings.
Bentonite used for piling must meet specified properties and be certified by the manufacturer.
The contractor must submit a description of the equipment and boring method for piling for approval.
The contractor must submit a description of their procedure for carrying out load tests for piling.
For sports-related items, specific brands and technical specifications are required for Vinyl Flooring, Sports PVC Flooring, BWF Certified PVC Badminton Court, Cushioning System, Football Goal post, Volleyball Post, Kho Kho Pole, Table Tennis Table, Badminton Pole, Badminton Net, Badminton Rackets, Nylon Shuttlecock, Roofing System, Aluminium Flashing, Gutters, Geo textile sheet, Sub-angular Sand, Angular Sand, Rounded Sand, and Double Wall Corrugated (DWC) HDPE perforated pipe, all conforming to relevant standards and specifications.

Source: Original DTCNView source document

Contract conditions

17 items

The bid for the work shall remain open for acceptance for a period of ninety days from the last date of receipt of bids.
The amount put to tender is exclusive of GST; bidders should offer rates excluding GST, which will be paid over the work bill amount.
The contractor will be responsible for payment of all royalties, other charges for quarrying materials, local taxes (including state GST & income Tax), Ferry and Tollage charges, and Octroi Taxes, Cess.

Show 14 more

The work must be completed within the stipulated period as mentioned in the NIT, commencing from the date of issue of work order.
The Chief Engineer, (Buildings & Bridges), Rural Works, Bhubaneswar, reserves the right to reject any or all tenders without assigning any reasons.
The contractor will be responsible for the loss or damage of any departmental materials/equipment supplied to him and the cost will be recovered at prevailing stock issue rate plus storage charges or market rates, whichever is higher.
No part of the contract shall be sub-let without written permission of the Superintending Engineer/Executive Engineer or transfer made by power of attorney.
No claim for monetary compensation will be entertained for delays due to the Department if a no-claim undertaking is furnished with the extension of time application.
All tenders received will remain valid for a period of ninety days from the date of receipt of tenders.
The contractor shall abide by the fair wage clause and latest revised labour rates; no claim for compensation will be entertained for statutory increases.
The contractor will not claim anything if the work is curtailed or stopped at any stage either for want of funds or due to any other reasons.
If the tenderer backs out before acceptance, E.M.D. will be forfeited.
Writing anything on unnumbered/blank pages of the schedule will make the tender liable for rejection.
All statutory deductions will be made as per current Govt. Guidelines.
The date of issue of the notice to the contractor to attend Division office for signing the agreement shall be treated as the date of commencement of work.
The contractor shall pay royalties of all materials as per the rate prescribed by State Govt. and produce receipts; otherwise, costs will be recovered from bills.
Testing charges for materials and construction (IRC/MOST/I.S.I. specifications) will be borne by the contractor.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Bill of quantities

336 priced items · ₹7.96 Cr (₹7,96,06,048)

Download BOQ file

Major components

Share of BOQ amount, grouped by item description

Reinforcement steel14%₹1.12 Cr
Concrete & RCC10%₹80.14 L
Masonry9%₹73.07 L
Electrical8%₹61.66 L
Plumbing & water supply5%₹42.97 L
Plaster, paint & finishing5%₹41.47 L

Largest items

By amount

Straightening, cutting, bending bent up or coiled rods, including cranking, hooking, welding or jointing the…Item 40 · 1,123.38 qtl₹1.03 Cr
Roof SlabItem 16 · 253.61 cum₹35.80 L
Brick work with Flyash Bricks 25cm x 12cm x 8cm size having crushing strength not less than 75Kg/cm2 with dim…Item 44 · 639.6 cum₹35.16 L
R.C.C. work M-25grade with 20mm and down grade black hard granite crusher broken stone chips including hoisti…Item 10 · 375.51 cum₹28.81 L
First floorItem 41 · 309.95 qtl₹28.58 L

Tender details

Tender reference: BLGR-Online 26/2026-27
Tender ID: 2026_CERWI_144697_1
District: Sonepur
Location: Sonepur
Tender type: National Competitive Bid
Tender category: Works
Period of work: 365 days

Show all 9 fields

Product category: Civil Works - Buildings
Pincode: 767017

Authority

State
Government of Odisha
Department
CE RW I
Organisation
RWCIRCLE-BALANGIR
Inviting authority
Chief Construction Engineer, R.W.Circle, Bolangir

All CE RW I tenders in Sonepur →

Costs

Estimated value: ₹7,96,85,000; ₹7.97 crore
EMD / bid security: ₹7,96,850; Exemption available for eligible bidders
Tender fee: ₹10,000; Cost of bid document

Bid validity: 90 days

Security & deductions from the DTCN (5)

EMD required is 1% of the estimated cost, to be transferred online.
Upon acceptance, the successful tenderer must deposit an initial security amount to make 2% of the accepted tender cost (including EMD) within 10 days and sign the agreement in PWD form-2.
Failure to deposit the initial security or sign the contract within the stipulated time will result in forfeiture of EMD and withdrawal of tender acceptance.
Additional Performance Security (APS) will be obtained from the successful bidder if the bid amount is less than the estimated cost, in shape of Term Deposit Receipt or Bank Guarantee, within seven days of LoA.
Failure to submit APS will lead to cancellation of bid, debarment for 180 days, and blacklisting proceedings.

Source: Original DTCN

Frequently asked questions

About this tender

Eligibility & bid requirements

DTCN analysed64 requirements extracted13 documents identifiedExtracted from the official tender document

Eligibility

10 items

Contractors must not have abandoned any work of similar nature or had their contract rescinded during the last five years.
Contractors must not be related to any officer in the rank of Assistant Engineer & above in the state R.D. Department or Assistant/Under Secretary & above in the R.D. Department.
Contractors must possess a valid Registration Certificate of the required class as mentioned in the TCN.

Show 7 more

Contractors must upload PAN card and up-to-date GSTIN.
Civil Contractors must upload a notarized agreement with a registered Electrical Contractor along with their valid license, GSTIN & PAN.
For works value up to Rs. 5.00 crores, no qualifying criteria except clauses 1(a), (b), (c), (d) & (e) are required.
Registered bidders from outside Odisha can participate after Portal Enrolment but must register with the appropriate authority of the State Government before work award.
Joint Venture/Consortium agreements/M.O.Us are not allowed to participate.
Bidders from outside the state can participate without a GSTIN clearance certificate if they submit an affidavit stating they are not registered under the GSTIN Act and have no liability, but must produce the certificate before final contract award.
Bidders registered under other State Governments/MES/Railways/CPWD in equivalent rank may participate, but the successful bidder must register under the state PWD before signing the Agreement.

Source: Original DTCNView source document

Experience

2 items

For works value exceeding Rs. 5.00 crores, bidders must demonstrate annual turnover, bid capacity, and works experience as per clauses 1(g), (f)(ii) & (i) in aggregate.
Intending tenderers should have executed works (Buildings/Bridges/Major Irrigation Structures) worth 50% of the estimated cost put to tender during any 3 financial years taken together of the last preceding 8 years, certified by an officer not below the rank of Superintending Engineer or equivalent.

Source: Original DTCNView source document

Financial

8 items

The total financial turnover in respect of Civil Engineering works must be not less than the amount put to tender during any 3 financial years taken together of the last preceding five financial years, certified by a Chartered Accountant.
If any Bidder/Tenderer withdraws their bid before the said period or makes any modification, the earnest money shall be forfeited.
EMD required is 1% of the estimated cost, to be transferred online.

Show 5 more

Upon acceptance, the successful tenderer must deposit an initial security amount to make 2% of the accepted tender cost (including EMD) within 10 days and sign the agreement in PWD form-2.
Failure to deposit the initial security or sign the contract within the stipulated time will result in forfeiture of EMD and withdrawal of tender acceptance.
Additional Performance Security (APS) will be obtained from the successful bidder if the bid amount is less than the estimated cost, in shape of Term Deposit Receipt or Bank Guarantee, within seven days of LoA.
Failure to submit APS will lead to cancellation of bid, debarment for 180 days, and blacklisting proceedings.
The Earnest Money of unsuccessful tenderers will be credited after the tender is awarded to the successful tenderer and will not carry any interest.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

27 items

Special class contractors shall employ one Graduate Engineer and two Diploma Holders belonging to the state of Odisha.
A class contractors shall employ one Graduate Engineer or two Diploma Holders belonging to the State of Odisha.
Bidders must possess compatible Digital Signature Certificates (DSC) of the required Class.

Show 24 more

Tenderers are required to submit a detailed program of work along with the tender.
Contractor must arrange all materials, machinery, and T&P at site, including carriage and storing.
Cement to be used must be from approved types (Ordinary Portland, High strength ordinary Portland, Portland Slag) with prior Engineer approval.
Reinforcement/Tensioned steel must conform to specified IS standards (Fe 250, Fe 415, Fe 500).
Contractor must arrange cement (IDCOL, OCL L&T & SAIL, TISCO) and steel from approved manufacturers and get it tested and approved by the department before use.
All required machineries (Concrete Mixers, Vibrators, Road Rollers, Sheep foot rollers etc.) must be arranged by the contractor at their own cost.
All reinforced cement concrete work should conform to Odisha Detailed Standard Specification & should be of M. 150 and M. 200 equivalent to nominal proportion (1:2:4) (1:1/2:3).
Shuttering and centering shall be with seasoned sal wood planks lined with suitable setting or steel shuttering.
Cement concrete in roof slab, beams etc., must be machine mixed and vibrated.
Contractor must arrange for water supply for all works and make sanitary arrangements for labour camps at their own cost.
Contractor must arrange adequate lighting arrangement for night work whenever necessary at their own cost.
Contractor must arrange all requisite equipment for testing Building if found necessary and bear the entire cost.
Contractor must submit a list of works in hand, a list of T&P, and a list of works executed along with the tender.
Contractor must employ one or more Engineering Graduates or Diploma Engineers as apprentices for works costing Rs. 2.5 Lakhs or more, paying them not less than Rs. 2000/month (Graduate) and Rs. 1600/month (Diploma).
The names of employed engineering personnel must be intimated to the tender receiving authority along with the tender.
Each bill of Special 'A' class contractor shall be accompanied by an Employment Role of the Engineering personal together with a certificate from the Graduate Engineer or Diploma Holder.
Materials for PH portion (Sanitary fixtures, C.I. High Level Flushing Cisterns, H.C.I. Soil Waste Pipes, C.P. Bath Room Fittings, Brass Fittings, Gunmetal Valves, G.I. Pipes, Galvanised Iron fittings, Paints, Cast Iron Manhole cover frame, Stone Ware Pipes & Fittings, P.V.C. (S.W.R.) & P.V.C (Rigid.) Pipe/Fittings) must be of specified brands and conform to ISI standards.
Building materials (Bricks, Cement Mortar, Cement, Sand, Coarse Aggregates, Reinforcements) must meet specified quality and IS standards.
For piling work, concrete must be as per specifications for cement concrete and of grade specified on drawings, with minimum cement quantity as per IS 2911 (Part-III).
Reinforcement for piling work must be as per specifications for cement concrete and of grade specified on drawings.
Bentonite used for piling must meet specified properties and be certified by the manufacturer.
The contractor must submit a description of the equipment and boring method for piling for approval.
The contractor must submit a description of their procedure for carrying out load tests for piling.
For sports-related items, specific brands and technical specifications are required for Vinyl Flooring, Sports PVC Flooring, BWF Certified PVC Badminton Court, Cushioning System, Football Goal post, Volleyball Post, Kho Kho Pole, Table Tennis Table, Badminton Pole, Badminton Net, Badminton Rackets, Nylon Shuttlecock, Roofing System, Aluminium Flashing, Gutters, Geo textile sheet, Sub-angular Sand, Angular Sand, Rounded Sand, and Double Wall Corrugated (DWC) HDPE perforated pipe, all conforming to relevant standards and specifications.

Source: Original DTCNView source document

Contract conditions

17 items

The bid for the work shall remain open for acceptance for a period of ninety days from the last date of receipt of bids.
The amount put to tender is exclusive of GST; bidders should offer rates excluding GST, which will be paid over the work bill amount.
The contractor will be responsible for payment of all royalties, other charges for quarrying materials, local taxes (including state GST & income Tax), Ferry and Tollage charges, and Octroi Taxes, Cess.

Show 14 more

The work must be completed within the stipulated period as mentioned in the NIT, commencing from the date of issue of work order.
The Chief Engineer, (Buildings & Bridges), Rural Works, Bhubaneswar, reserves the right to reject any or all tenders without assigning any reasons.
The contractor will be responsible for the loss or damage of any departmental materials/equipment supplied to him and the cost will be recovered at prevailing stock issue rate plus storage charges or market rates, whichever is higher.
No part of the contract shall be sub-let without written permission of the Superintending Engineer/Executive Engineer or transfer made by power of attorney.
No claim for monetary compensation will be entertained for delays due to the Department if a no-claim undertaking is furnished with the extension of time application.
All tenders received will remain valid for a period of ninety days from the date of receipt of tenders.
The contractor shall abide by the fair wage clause and latest revised labour rates; no claim for compensation will be entertained for statutory increases.
The contractor will not claim anything if the work is curtailed or stopped at any stage either for want of funds or due to any other reasons.
If the tenderer backs out before acceptance, E.M.D. will be forfeited.
Writing anything on unnumbered/blank pages of the schedule will make the tender liable for rejection.
All statutory deductions will be made as per current Govt. Guidelines.
The date of issue of the notice to the contractor to attend Division office for signing the agreement shall be treated as the date of commencement of work.
The contractor shall pay royalties of all materials as per the rate prescribed by State Govt. and produce receipts; otherwise, costs will be recovered from bills.
Testing charges for materials and construction (IRC/MOST/I.S.I. specifications) will be borne by the contractor.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Costs

Estimated value

₹7,96,85,000

₹7.97 crore

EMD / bid security

₹7,96,850

Exemption available for eligible bidders

Tender fee

₹10,000

Cost of bid document

Bid validity: 90 days

Security & deductions from the DTCN (5)

EMD required is 1% of the estimated cost, to be transferred online.
Upon acceptance, the successful tenderer must deposit an initial security amount to make 2% of the accepted tender cost (including EMD) within 10 days and sign the agreement in PWD form-2.
Failure to deposit the initial security or sign the contract within the stipulated time will result in forfeiture of EMD and withdrawal of tender acceptance.
Additional Performance Security (APS) will be obtained from the successful bidder if the bid amount is less than the estimated cost, in shape of Term Deposit Receipt or Bank Guarantee, within seven days of LoA.
Failure to submit APS will lead to cancellation of bid, debarment for 180 days, and blacklisting proceedings.

Source: Original DTCN

Frequently asked questions

Construction and Renovation of DIET Building at Sonepur in the district of Subarnapur for the year 2026-27

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

Construction and Renovation of DIET Building at Sonepur in the district of Subarnapur for the year 2026-27

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more