What is the last date to bid for this tender?

Bids must be submitted on the Odisha eProcurement portal (tendersodisha.gov.in) by 05 Nov 2026, 05:00 PM. Bids are scheduled to open on 06 Nov 2026, 11:00 AM.

What is the estimated value of this tender?

The estimated tender value is ₹54.97 L (₹54,97,084).

How much EMD is required?

The EMD (bid security) is ₹55.0K (₹55,000). The portal lists EMD exemption as available for eligible bidders — check the DTCN for who qualifies.

Who can bid for this tender?

The DTCN states: Contractors must be registered with Odisha State Government or equivalent grade/class registered with Central Government/any other State Government/MES/Railways; Contractors must possess up-to-date compatible Digital Signature Certificate.

What work experience is required?

As extracted from the DTCN: Contractors must have successfully completed similar type of work(s) in any one year during the last 7 years, meeting one of the following criteria: three completed works each costing not less than 40% of the estimated cost, or two completed works each costing not less than 50% of the estimated cost, or one completed work costing not less than 80% of the estimated cost; Similar type of work must cover construction of Road/Drain/Culvert/Bridge/Building work(s) for State Government/Central Government/PSUs/ULBs/Municipal Corporation.

What is the completion period?

The period of work is 180 days, and bids must remain valid for 120 days.

Which department issued this tender?

This tender was issued by Municipal Bodies, Bhubaneswar Municipal Corporation; the tender inviting authority is the Executive Engineer (Central Tender Cell).

What documents are required to submit a bid?

The DTCN lists 18 documents, including Cost of Bid Document (Online remittance), Earnest Money Deposit (EMD) @ 1% of Estimated Cost (Online remittance), Valid Registration Certificate, Valid GST Registration Certificate & GSTIN, PAN Card, No Relationship Certificate (Non-Judicial Stamp Paper), and 12 more.

RoadLive

Construction and Development of Internal roads at Sishu Vihar near Koel Campus and Dr. Bishoyi s House and Bajarang Vihar in Ward No. 06

BMC AREA, Khordha Municipal BodiesBhubaneswar Municipal Corporation

Tender ID 2026_ORULB_143526_2Ref BMC-EE-Tender Cell-81/2026-27 dt. 13.10.2026

Estimated value: ₹54.97 L
EMD: ₹55.0K; Exemption available
Tender fee: ₹10.0K
Work period: 180 days

Closing in

3 days left

05 Nov 2026, 05:00 PM

About this tender

Municipal Bodies has invited bids for “Construction and Development of Internal roads at Sishu Vihar near Koel Campus and Dr. Bishoyi s House and Bajarang Vihar in Ward No. 06” in BMC AREA, Khordha district, Odisha. The estimated tender value is ₹54.97 lakh and the completion period is 180 days. Bids must be submitted by 05 Nov 2026, 05:00 PM.

Bid readiness

Based on the tender, not your profile

Done: Tender is currently open
Done: BOQ available · 17 items
Done: DTCN analysed · 41 requirements extracted
Done: 18 required documents identified
Needs review: Experience requirement needs review
Needs review: Financial requirements need review

Review requirements

Important dates

All times IST, as published on the portal

Published17 Oct 2026, 11:00 AM
Document downloadUntil 05 Nov 2026
Submission deadline· 3 days left05 Nov 2026, 05:00 PM
Bid opening06 Nov 2026, 11:00 AM

Tender intelligence

Eligibility & bid requirements

DTCN analysed41 requirements extracted18 documents identifiedExtracted from the official tender document

Bhubaneswar Municipal Corporation invites Percentage Rate Bids for 12 civil construction works, with estimated costs ranging from Rs. 50.79 Lakhs to Rs. 2.66 Crores. The works involve construction and improvement of roads, drains, and a community center. Contractors of "B" Class or "A" Class are eligible, with completion periods varying from 180 to 365 calendar days. Bidders must submit bids online through www.tendersodisha.gov.in.

Eligibility

2 items

Contractors must be registered with Odisha State Government or equivalent grade/class registered with Central Government/any other State Government/MES/Railways.
Contractors must possess up-to-date compatible Digital Signature Certificate.

Source: Original DTCNView source document

Experience

5 items

Contractors must have successfully completed similar type of work(s) in any one year during the last 7 years, meeting one of the following criteria: three completed works each costing not less than 40% of the estimated cost, or two completed works each costing not less than 50% of the estimated cost, or one completed work costing not less than 80% of the estimated cost.
Similar type of work must cover construction of Road/Drain/Culvert/Bridge/Building work(s) for State Government/Central Government/PSUs/ULBs/Municipal Corporation.
Average Annual Financial Turnover of not less than 30% of the estimated cost of the corresponding work during the last 3 financial years (FY 2023-24, 2024-25, and FY 2025-26), certified by a registered Chartered Accountant.

Show 2 more

Unless a Civil Engineer Contractor, the successful bidder must deploy at least one experienced Civil Engineer at the work site with a Diploma or Degree in Civil Engineering from an AICTE recognized institute and at least two years of post-qualification experience.
Bidders who have applied for/are undergoing Corporate Debt Restructuring (CDR)/Strategic Debt Restructuring (SDR) or facing recovery proceedings from Financial Institutions or declared 'Sick' by BIFR in the last three financial years are not eligible.

Source: Original DTCNView source document

Financial

11 items

Each intending bidder must furnish EMD @ 1% of the Estimated Cost.
The successful bidder must furnish Initial Security Deposit (ISD) amounting to not less than 2% of the accepted value of the tender within 7 days from the date of issue of Letter of Acceptance (LoA).
Additional Performance Security (APS) will be obtained on an incremental basis if the accepted bid price is lower than the Cost Put to Tender, calculated based on the Rounding Off of Percentage Less (ROPL).

Show 8 more

If the accepted bid price is such that the ROPL is up to (-)10%, no APS is required.
If the accepted bid price is such that the ROPL is below (-)10% but not below (-)20%, APS is incremented by 0.2% for every percentage of ROPL below (-)10%.
If the accepted bid price is such that the ROPL is below (-)20% but not below (-)30%, APS is incremented by 0.3% for every percentage of ROPL below (-)20% in addition to 2% of the accepted bid price.
If the accepted bid price is such that the ROPL is below (-)30% or more, APS is incremented by 0.5% for every percentage of ROPL below (-)30% in addition to 5% of the accepted bid price.
The successful bidder must deposit the APS amount within 7 days from the date of communication.
The contractor shall not sub-contract/sublet the work; violation leads to rescission of contract and forfeiture of EMD/ISD.
8% of each bill amount will be withheld by BMC towards performance security, treated as Security Deposit (SD) with EMD and ISD.
If the contractor fails to rectify bad/sub-standard work, no payment will be made for that work, and the contract may be rescinded with forfeiture of ISD and SD.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

11 items

Bidders must be in possession of or under lease/hire agreement for tools, plants, equipment, and machineries as per Schedule-‘D’.
Bidders must secure a minimum qualifying mark of 80 in the evaluation of tools, plants, machineries, and equipment.
Deployment of specific tools, plants, machineries, and equipment as per Schedule-D, including Truck/Tipper (1 No.), Hydraulic Excavator (1 No.), Mechanical concrete mixture machine (1 No.), Vibratory Tandem Roller Compactor (1 No.), Plate/Skid Vibrator (1 No.), Needle Vibrator (1 No.), Vehicle Mounted/Driven Water Tank (1 No.), Survey Instrument (1 No.), and Steel Shuttering and Centring material (500 Sqm).

Show 8 more

Successful bidders (unless Civil Engineer Contractors) must deploy an experienced Civil Engineer with a Diploma or Degree in Civil Engineering from an AICTE recognized institute and at least two years of post-qualification experience in Civil Engineering survey, monitoring, quality control, or construction works.
Quality certificates for paver blocks/kerb stones from the manufacturer for each consignment.
For concrete roads, tests include slump cone test, compressive strength test (7 & 28 days), core cutting test, and sieve analysis of coarse aggregates for PCC.
For Ready Mix Concrete, a test certificate detailing mix proportions, cement type, plasticizer/admixture, and concrete grade is required.
For asphalt roads, tests include quality and grade of bitumen, bitumen content, temperature of bitumen mixed aggregate, and core test for density and thickness.
For sub-base, tests include compaction/density test, sieve analysis of coarse aggregate, and CBR or Los Angeles Abrasion Test.
The contractor shall provide all materials conforming to relevant latest editions of BIS specifications and Codes of Practices.
The contractor must facilitate quality testing of materials through Government or Government authorized laboratories as directed by the authority.

Source: Original DTCNView source document

Contract conditions

12 items

Each bid must be submitted online through www.tendersodisha.gov.in.
Bids must be submitted by 05:00 P.M. of 05.11.2026.
Technical Bids will be opened on 06.11.2026 (11:00 A.M. onwards).

Show 9 more

The bid shall remain valid for a period of 120 days from the date of opening.
If the % rate quoted by any bidder is lower than or equal to 15% less (-), such bid shall be rejected.
If more than one bid is quoted at 14.99% less, the tender will be finalized through a transparent lottery system.
The completion period for works ranges from 180 to 365 Calendar Days.
Statutory withhold/deduction of taxes, SD, MSD as applicable, shall be done by BMC from each running account bill.
A compensation for delay in completion of work will be computed @1.50% per month, not exceeding 10% of the Tendered Value of work.
The contractor may be blacklisted for reasons such as misbehavior, tender fixing, non-achievement of milestones, violation of contract conditions, security considerations, or submission of false documents.
The contractor must submit a work program and sign the agreement within 7 days from the date of issue of LoA.
For legal disputes, the jurisdiction will be within the State of Odisha.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Bill of quantities

17 priced items · ₹54.97 L (₹54,97,084)

Download BOQ file

Major components

Share of BOQ amount, grouped by item description

Road & bituminous work53%₹29.08 L
Concrete & RCC45%₹24.51 L
Earthwork & excavation3%₹1.38 L

Largest items

By amount

Providing and laying "BITUMINOUS MACADAM" with hot mix plant using crushed aggregates of specified grading pr…Item 10 · 137.29 Cum₹14.24 L
Providing and laying semi dense bituminous concrete with batch type hot mix plant using crushed aggregates of…Item 11 · 68.64 Cum₹9.72 L
Cement concrete in prop. (1:4:8) in foundation using 4 cm size HGCB metal of quality from approved quarry was…Item 7 · 125.1 Cum₹7.33 L
R.C.C. work of M20 grade with 20 mm down graded chips (C.B.) including hoisting & laying etc compete of all m…Item 12 · 105.9 Cum₹6.57 L
Providing laying, spreading and compacting graded stone aggregate to "WET MIX MACADAM" specification includin…Item 5 · 252.75 Cum₹6.12 L

Tender details

Tender reference: BMC-EE-Tender Cell-81/2026-27 dt. 13.10.2026
Tender ID: 2026_ORULB_143526_2
District: Khordha
Location: BMC AREA
Tender type: Open Tender
Tender category: Works
Period of work: 180 days

Show all 9 fields

Product category: Civil Works - Others
Pincode: 751022

Authority

State
Government of Odisha
Department
Municipal Bodies
Body
Bhubaneswar Municipal Corporation
Inviting authority
Executive Engineer (Central Tender Cell)

All Municipal Bodies tenders in Khordha →

Costs

Estimated value: ₹54,97,084; ₹54.97 lakh
EMD / bid security: ₹55,000; Exemption available for eligible bidders
Tender fee: ₹10,000; Cost of bid document

Bid validity: 120 days

Security & deductions from the DTCN (11)

Each intending bidder must furnish EMD @ 1% of the Estimated Cost.
The successful bidder must furnish Initial Security Deposit (ISD) amounting to not less than 2% of the accepted value of the tender within 7 days from the date of issue of Letter of Acceptance (LoA).
Additional Performance Security (APS) will be obtained on an incremental basis if the accepted bid price is lower than the Cost Put to Tender, calculated based on the Rounding Off of Percentage Less (ROPL).
If the accepted bid price is such that the ROPL is up to (-)10%, no APS is required.
If the accepted bid price is such that the ROPL is below (-)10% but not below (-)20%, APS is incremented by 0.2% for every percentage of ROPL below (-)10%.
If the accepted bid price is such that the ROPL is below (-)20% but not below (-)30%, APS is incremented by 0.3% for every percentage of ROPL below (-)20% in addition to 2% of the accepted bid price.
If the accepted bid price is such that the ROPL is below (-)30% or more, APS is incremented by 0.5% for every percentage of ROPL below (-)30% in addition to 5% of the accepted bid price.
The successful bidder must deposit the APS amount within 7 days from the date of communication.
The contractor shall not sub-contract/sublet the work; violation leads to rescission of contract and forfeiture of EMD/ISD.
8% of each bill amount will be withheld by BMC towards performance security, treated as Security Deposit (SD) with EMD and ISD.
If the contractor fails to rectify bad/sub-standard work, no payment will be made for that work, and the contract may be rescinded with forfeiture of ISD and SD.

Source: Original DTCN

Frequently asked questions

About this tender

Eligibility & bid requirements

DTCN analysed41 requirements extracted18 documents identifiedExtracted from the official tender document

Eligibility

2 items

Contractors must be registered with Odisha State Government or equivalent grade/class registered with Central Government/any other State Government/MES/Railways.
Contractors must possess up-to-date compatible Digital Signature Certificate.

Source: Original DTCNView source document

Experience

5 items

Contractors must have successfully completed similar type of work(s) in any one year during the last 7 years, meeting one of the following criteria: three completed works each costing not less than 40% of the estimated cost, or two completed works each costing not less than 50% of the estimated cost, or one completed work costing not less than 80% of the estimated cost.
Similar type of work must cover construction of Road/Drain/Culvert/Bridge/Building work(s) for State Government/Central Government/PSUs/ULBs/Municipal Corporation.
Average Annual Financial Turnover of not less than 30% of the estimated cost of the corresponding work during the last 3 financial years (FY 2023-24, 2024-25, and FY 2025-26), certified by a registered Chartered Accountant.

Show 2 more

Unless a Civil Engineer Contractor, the successful bidder must deploy at least one experienced Civil Engineer at the work site with a Diploma or Degree in Civil Engineering from an AICTE recognized institute and at least two years of post-qualification experience.
Bidders who have applied for/are undergoing Corporate Debt Restructuring (CDR)/Strategic Debt Restructuring (SDR) or facing recovery proceedings from Financial Institutions or declared 'Sick' by BIFR in the last three financial years are not eligible.

Source: Original DTCNView source document

Financial

11 items

Each intending bidder must furnish EMD @ 1% of the Estimated Cost.
The successful bidder must furnish Initial Security Deposit (ISD) amounting to not less than 2% of the accepted value of the tender within 7 days from the date of issue of Letter of Acceptance (LoA).
Additional Performance Security (APS) will be obtained on an incremental basis if the accepted bid price is lower than the Cost Put to Tender, calculated based on the Rounding Off of Percentage Less (ROPL).

Show 8 more

If the accepted bid price is such that the ROPL is up to (-)10%, no APS is required.
If the accepted bid price is such that the ROPL is below (-)10% but not below (-)20%, APS is incremented by 0.2% for every percentage of ROPL below (-)10%.
If the accepted bid price is such that the ROPL is below (-)20% but not below (-)30%, APS is incremented by 0.3% for every percentage of ROPL below (-)20% in addition to 2% of the accepted bid price.
If the accepted bid price is such that the ROPL is below (-)30% or more, APS is incremented by 0.5% for every percentage of ROPL below (-)30% in addition to 5% of the accepted bid price.
The successful bidder must deposit the APS amount within 7 days from the date of communication.
The contractor shall not sub-contract/sublet the work; violation leads to rescission of contract and forfeiture of EMD/ISD.
8% of each bill amount will be withheld by BMC towards performance security, treated as Security Deposit (SD) with EMD and ISD.
If the contractor fails to rectify bad/sub-standard work, no payment will be made for that work, and the contract may be rescinded with forfeiture of ISD and SD.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

11 items

Bidders must be in possession of or under lease/hire agreement for tools, plants, equipment, and machineries as per Schedule-‘D’.
Bidders must secure a minimum qualifying mark of 80 in the evaluation of tools, plants, machineries, and equipment.
Deployment of specific tools, plants, machineries, and equipment as per Schedule-D, including Truck/Tipper (1 No.), Hydraulic Excavator (1 No.), Mechanical concrete mixture machine (1 No.), Vibratory Tandem Roller Compactor (1 No.), Plate/Skid Vibrator (1 No.), Needle Vibrator (1 No.), Vehicle Mounted/Driven Water Tank (1 No.), Survey Instrument (1 No.), and Steel Shuttering and Centring material (500 Sqm).

Show 8 more

Successful bidders (unless Civil Engineer Contractors) must deploy an experienced Civil Engineer with a Diploma or Degree in Civil Engineering from an AICTE recognized institute and at least two years of post-qualification experience in Civil Engineering survey, monitoring, quality control, or construction works.
Quality certificates for paver blocks/kerb stones from the manufacturer for each consignment.
For concrete roads, tests include slump cone test, compressive strength test (7 & 28 days), core cutting test, and sieve analysis of coarse aggregates for PCC.
For Ready Mix Concrete, a test certificate detailing mix proportions, cement type, plasticizer/admixture, and concrete grade is required.
For asphalt roads, tests include quality and grade of bitumen, bitumen content, temperature of bitumen mixed aggregate, and core test for density and thickness.
For sub-base, tests include compaction/density test, sieve analysis of coarse aggregate, and CBR or Los Angeles Abrasion Test.
The contractor shall provide all materials conforming to relevant latest editions of BIS specifications and Codes of Practices.
The contractor must facilitate quality testing of materials through Government or Government authorized laboratories as directed by the authority.

Source: Original DTCNView source document

Contract conditions

12 items

Each bid must be submitted online through www.tendersodisha.gov.in.
Bids must be submitted by 05:00 P.M. of 05.11.2026.
Technical Bids will be opened on 06.11.2026 (11:00 A.M. onwards).

Show 9 more

The bid shall remain valid for a period of 120 days from the date of opening.
If the % rate quoted by any bidder is lower than or equal to 15% less (-), such bid shall be rejected.
If more than one bid is quoted at 14.99% less, the tender will be finalized through a transparent lottery system.
The completion period for works ranges from 180 to 365 Calendar Days.
Statutory withhold/deduction of taxes, SD, MSD as applicable, shall be done by BMC from each running account bill.
A compensation for delay in completion of work will be computed @1.50% per month, not exceeding 10% of the Tendered Value of work.
The contractor may be blacklisted for reasons such as misbehavior, tender fixing, non-achievement of milestones, violation of contract conditions, security considerations, or submission of false documents.
The contractor must submit a work program and sign the agreement within 7 days from the date of issue of LoA.
For legal disputes, the jurisdiction will be within the State of Odisha.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Costs

Estimated value

₹54,97,084

₹54.97 lakh

EMD / bid security

₹55,000

Exemption available for eligible bidders

Tender fee

₹10,000

Cost of bid document

Bid validity: 120 days

Security & deductions from the DTCN (11)

Each intending bidder must furnish EMD @ 1% of the Estimated Cost.
The successful bidder must furnish Initial Security Deposit (ISD) amounting to not less than 2% of the accepted value of the tender within 7 days from the date of issue of Letter of Acceptance (LoA).
Additional Performance Security (APS) will be obtained on an incremental basis if the accepted bid price is lower than the Cost Put to Tender, calculated based on the Rounding Off of Percentage Less (ROPL).
If the accepted bid price is such that the ROPL is up to (-)10%, no APS is required.
If the accepted bid price is such that the ROPL is below (-)10% but not below (-)20%, APS is incremented by 0.2% for every percentage of ROPL below (-)10%.
If the accepted bid price is such that the ROPL is below (-)20% but not below (-)30%, APS is incremented by 0.3% for every percentage of ROPL below (-)20% in addition to 2% of the accepted bid price.
If the accepted bid price is such that the ROPL is below (-)30% or more, APS is incremented by 0.5% for every percentage of ROPL below (-)30% in addition to 5% of the accepted bid price.
The successful bidder must deposit the APS amount within 7 days from the date of communication.
The contractor shall not sub-contract/sublet the work; violation leads to rescission of contract and forfeiture of EMD/ISD.
8% of each bill amount will be withheld by BMC towards performance security, treated as Security Deposit (SD) with EMD and ISD.
If the contractor fails to rectify bad/sub-standard work, no payment will be made for that work, and the contract may be rescinded with forfeiture of ISD and SD.

Source: Original DTCN

Frequently asked questions

Construction and Development of Internal roads at Sishu Vihar near Koel Campus and Dr. Bishoyi s House and Bajarang Vihar in Ward No. 06

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

Construction and Development of Internal roads at Sishu Vihar near Koel Campus and Dr. Bishoyi s House and Bajarang Vihar in Ward No. 06

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more