What is the last date to bid for this tender?

Bids must be submitted on the Odisha eProcurement portal (tendersodisha.gov.in) by 31 Oct 2026, 05:00 PM. Bids are scheduled to open on 02 Nov 2026, 11:00 AM.

What is the estimated value of this tender?

The estimated tender value is ₹21.47 L (₹21,47,000).

How much EMD is required?

The EMD (bid security) is ₹21.5K (₹21,470). The portal lists EMD exemption as available for eligible bidders — check the DTCN for who qualifies.

Who can bid for this tender?

The DTCN states: Contractors must have a valid Civil license of requisite class (B, C, or D as per tender) registered with State RWSS/PHED/Irrigation/Minor Irrigations/RW/PWD; Contractors must have a valid H.T. License issued by ELBO.

What work experience is required?

As extracted from the DTCN: For Tube Well projects, bidders/contractors who do not own a DTH/Mud rotary Rig must submit a joint venture agreement with Rig owners/Contractors having ownership, executed in the court of the First-Class Magistrate/Executive Magistrate; Bidders must have satisfactorily completed (not less than 80% of the original contract value) as prime contractor at least one similar work of not less than 40% of the proposed contract value at the FY of invitation of tender price level in the last 5 years.

What is the completion period?

The period of work is 180 days, and bids must remain valid for 365 days.

Which department issued this tender?

This tender was issued by Orissa Lift Irrigation Corporation, LI Southern Circle Berhampur, LI Division Berhampur; the tender inviting authority is the Executive Engineer, L.I. Division, Berhampur.

What documents are required to submit a bid?

The DTCN lists 11 documents, including Online/Over the counter generated Paper cost & EMD challan, Valid Civil License (B, C, or D grade as per Tender), Valid Electrical (H.T) License issued by ELBO, Valid GSTIN certificate, Valid PAN issued by I.T. department, Valid joint venture agreement (Registered), and 5 more.

OtherClosed

Mulakumari-V T/W

OdishaOrissa Lift Irrigation CorporationLI Division Berhampur

Tender ID 2026_OLIC_143574_7Ref OLIC/BRAHMAPUR/02-2026-27

Estimated value: ₹21.47 L
EMD: ₹21.5K; Exemption available
Tender fee: ₹7.1K
Work period: 180 days

Bid submission

Closed

Closed on 31 Oct 2026, 05:00 PM

Bid submission for this tender has closed. Browse closed tenders in the archive →

About this tender

Orissa Lift Irrigation Corporation has invited bids for “Mulakumari-V T/W” in Mulakumari under Purusottampur Block, Odisha. The estimated tender value is ₹21.47 lakh and the completion period is 180 days. Bids must be submitted by 31 Oct 2026, 05:00 PM.

Bid readiness

Based on the tender, not your profile

Not available: Bid submission has closed
Done: BOQ available · 68 items
Done: DTCN analysed · 61 requirements extracted
Done: 11 required documents identified
Needs review: Experience requirement needs review
Needs review: Financial requirements need review

Review requirements

Important dates

All times IST, as published on the portal

Published21 Oct 2026, 11:00 AM
Document downloadUntil 31 Oct 2026
Submission deadline31 Oct 2026, 05:00 PM
Bid opening02 Nov 2026, 11:00 AM

Tender intelligence

Eligibility & bid requirements

DTCN analysed61 requirements extracted11 documents identifiedExtracted from the official tender document

The Odisha Lift Irrigation Corporation Ltd. (OLIC) invites bids for the installation and energization of 50 new Tube Well Lift Irrigation Projects across various blocks in Ganjam District. The estimated cost for each project ranges from Rs. 18.31 Lakhs to Rs. 30.15 Lakhs. Contractors registered with the State Government or equivalent central government bodies, holding valid Civil and HT Licenses, are eligible to bid. The work is to be completed within 90 days from the work order issuance.

Eligibility

6 items

Contractors must have a valid Civil license of requisite class (B, C, or D as per tender) registered with State RWSS/PHED/Irrigation/Minor Irrigations/RW/PWD.
Contractors must have a valid H.T. License issued by ELBO.
Both Civil and HT Licenses must be valid for at least 1 month from the date of tender opening.

Show 3 more

Contractors must have a valid GST Registration certificate and PAN issued by I.T. Department.
The joint venture agreement must be registered at the Sub-Register/District Registration Office as per the Registration Act 1908 and have an agreement period of not less than 18 months.
If the drilling contractor/owner of Rig and Electrical contractors make joint venture agreements with more than one Civil contractor in a single package, bids under the same package will not be considered and will be rejected.

Source: Original DTCNView source document

Experience

7 items

For Tube Well projects, bidders/contractors who do not own a DTH/Mud rotary Rig must submit a joint venture agreement with Rig owners/Contractors having ownership, executed in the court of the First-Class Magistrate/Executive Magistrate.
Bidders must have satisfactorily completed (not less than 80% of the original contract value) as prime contractor at least one similar work of not less than 40% of the proposed contract value at the FY of invitation of tender price level in the last 5 years.
A weightage of 10% per year shall be given to the cost of satisfactorily completed works of previous years to bring them to the current price level.

Show 4 more

Bidders who have been awarded similar works in the past but have shown unsatisfactory progress, or who have been declared as defaulter contractors, are not eligible.
In River Lift Projects, Civil and Electrical contractors with appropriate class and experience can participate through a joint venture agreement.
In Tube Well Projects, Rig owners/Contractors having ownership of Mud Rotary Rig/DTH Rig and a minimum of 3 years' experience in successful drilling works are eligible to participate in a joint venture agreement with appropriate class Civil and Electrical contractors.
The experience certificate of the drilling contractor must be issued by a competent authority not below the rank of Divisional Officer.

Source: Original DTCNView source document

Financial

10 items

EMD @ 1% must be deposited by the Bidder in Online Mode through the e_portal.
If a bidder withdraws or modifies their bid before the validity period, the EMD/ISD deposited shall be forfeited.
The successful tenderer shall deposit 1% of the accepted tendered amount towards Initial Security Deposit (ISD) within 7 days from the date of issue of the letter of intent.

Show 7 more

Additional Performance Security (APS) will be calculated incrementally based on the Rounding Off of Percentage Less (ROPL) of the accepted Bid Price compared to the Cost Put to Tender.
APS is not required if ROPL is up to (-)10%.
APS is 0.2% for every percentage of ROPL below (-)10% but not below (-)20%.
APS is 2% plus 0.3% for every percentage of ROPL below (-)20% but not below (-)30%.
APS is 5% plus 0.5% for every percentage of ROPL below (-)30% or more.
The additional performance security shall be treated as part of the performance security and refunded upon successful completion of work within 7 days of completion certificate issuance.
During the guarantee period, the contractor must rectify defects within 15 days, or the cost will be deducted from the security money.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

20 items

The work involves installation and energization of 50 new Tube Well Lift Irrigation Projects, including supply of materials and labor.
Contractors must erect HT, LT lines, commission Sub-Stations with all required materials, and hand over to TPSODL Electrical Division, Brahmapur after inspection by the Electrical Inspector.
Power supply work must adhere to REC specifications and sanctioned estimates provided by TPSODL, Electrical Division, Brahmapur.

Show 17 more

The project must be handed over to the concerned Pani Panchayat after completion of all works and a successful trial run in the presence of beneficiaries and the Engineer-in-Charge.
All construction works (Pump Chamber, Fixed foundation, Distribution Tank, ARV Tank, Butterfly Valve Tank, Supporting Pillar, HDPE Pipe Line, Road Crossing, Drilling of Bore) must be executed as per enclosed specifications (Annexure-II) and Engineer-in-Charge's direction.
Materials supplied must conform to specifications in Annexure-III for Civil works, and purchase bills must be submitted.
HDPE pipes must conform to IS-4985/2000 of BIS-Amendment-2, bear ISI Mark, and have pre-delivery and post-delivery test reports by CIPET, Odisha.
GI pipes must conform to IS-1239 (Pt 1/2004) and bear ISI certification mark.
Pumps must be 3 Phase Mono Block squirrel cage induction and centrifugal pump sets (with bronze impeller) having discharge 28 LPS at various heads, with BEE specification and energy efficiency.
Control Panel Starters must be Auto-Star delta type suitable for 10 HP to 15 HP squirrel cage induction motors, with overloaded and single phasing preventer, Volt Meter, Amper Meter & MCB.
Cables must be PVC insulated (heavy duty) armored aluminum cable conforming to IS-1554(Part 1)/1988.
PVC copper wire must conform to IS 694, be multi-strand of 4 mm2 size, and have an operating voltage of 1100 Volt.
Electrical consumable materials (PVC tape, black tape, fuse wire) should have ISI marked or be of good quality.
Main switches must conform to IS-4064/Part I & II with ISI Mark, be Triple pole & neutral, of voltage range 440 Volt, with Re-Wire able fuse of 63 AMP or 100 AMP.
GI Fittings, CI Foot Valve/NR Valve/Sluice Valve, CI Air Release Valve, and HDPE Fittings must conform to their respective IS standards and bear ISI Mark where applicable.
Electrical construction works must be executed as per REC standard and specification as per TPSODL, BOED, Brahmapur sanctioned estimate.
The contractor must arrange for testing of the transformer by an approved authority before commissioning and submit a successful test report and manufacturer's test certificate.
The contractor must arrange for inspection by the Electrical Inspector/Deputy Electrical Inspector/competent authority of TPSODL, Electrical Division, Brahmapur upon completion of electrical work and obtain approval for charging the Sub-Station.
The contractor must liaise with TPSODL, Electrical Division, Brahmapur for execution of agreement of Pani Panchayat, shut down, connection, charging of S/S, and handing over.
The contractor is responsible for all formalities needed for charging of S/S, including collection and submission of test reports, preparation of checklists, and liaison for installation of a 3 phase sub-station energy meter.

Source: Original DTCNView source document

Contract conditions

18 items

The approximate estimated cost for each project ranges from Rs. 18.31 Lakhs to Rs. 30.15 Lakhs.
The period of completion is 90 days for all projects from the date of issue of the work order.
The bid must be submitted online in a single cover system.

Show 15 more

The bids shall remain open for acceptance for a period of 365 days from the last date of receipt of bids.
The contractor has to quote the Percentage Rate excess or less up to two digits only after the decimal point.
If the contractor fails to produce original documents after being the successful lowest bidder, they shall be debarred for three years and blacklisted.
The successful tenderer must execute agreements with the Executive Engineer, L.I. Division, Brahmapur within 7 days from the date of issue of the letter of intent.
The agreement should be on an approved PWD Form.
If more than one bidder is L1, the tender will be decided through a transparent lottery system.
Not more than 7 packages shall ordinarily be awarded to a single contractor; the authority reserves the right to reject excess packages.
Payment to the contractor shall be made on a "First & Final bill" basis after successful trial and handing over of the project.
The contractor shall furnish a guarantee that all work items are free from defects for a period of not less than 18 months from the date of handing over.
Compensation for delay will be ½ percent on the estimated cost for every day the work remains uncompleted, up to a maximum of 10 percent of the estimated cost.
The contractor must complete one-fourth of the work before one-fourth of the time, one-half before one-half, and three-fourths before three-fourths of the time, or pay compensation of one-third percent on the estimated cost for each day of incomplete work.
The contractor shall bear all taxes including GST, Income Tax, Royalty, fair weather charges, and Labour cess.
The cost of water supply for works and bailing out water from foundations is to be borne by the contractor.
The contractor must obtain formal approval from the Electrical Inspector for energization of the sub-station, and inspection fees will be reimbursed by OLIC upon documentary evidence.
No payment will be made for partially completed power supply work; a completion certificate is issued only after full erection, inspection report, Pani Panchayat agreement, charging of Sub-Station, and handing over to TPSODL.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Bill of quantities

68 priced items · ₹21.09 L (₹21,09,304)

Download BOQ file

Major components

Share of BOQ amount, grouped by item description

Plumbing & water supply50%₹10.63 L
Electrical21%₹4.46 L
Earthwork & excavation20%₹4.13 L
Plaster, paint & finishing4%₹82.7K
Concrete & RCC2%₹43.4K
Masonry2%₹37.0K

Largest items

By amount

Cost, Supplying of ISI marked High Density Polythelene (HDPE) Pipes for water supply as per IS 4984/2016 in t…Item 1.37 · 970 M₹5.27 L
Construction erection of 11/0.416 KV, 25 KVA (BIS level-II star 2) D.P mounted Sub-Station including transfor…Item 1.53 · 1 NO₹3.67 L
Fitting of 160 mm outer dia High Density Polythylene Pipes of specified material grade pressure rating by but…Item 1.14 · 970 M₹3.46 L
Construction of outlet at TankItem 1.17 · 19 NO₹1.69 L
Earthwork in excavation of foundation in hard soil such as Hard stiff clay,stiff black cotton,hard red earth,…Item 1.45 · 727.5 NO₹80.5K

Tender details

Tender reference: OLIC/BRAHMAPUR/02-2026-27
Tender ID: 2026_OLIC_143574_7
Location: Mulakumari under Purusottampur Block
Tender type: Open Tender
Tender category: Works
Period of work: 180 days

Show all 8 fields

Product category: Civil Works - Lift Irrigation Schemes
Pincode: 760006

Authority

State
Government of Odisha
Department
Orissa Lift Irrigation Corporation
Organisation
LI Southern Circle Berhampur
Office
LI Division Berhampur
Inviting authority
Executive Engineer, L.I. Division, Berhampur

Costs

Estimated value: ₹21,47,000; ₹21.47 lakh
EMD / bid security: ₹21,470; Exemption available for eligible bidders
Tender fee: ₹7,080; Cost of bid document

Bid validity: 365 days

Security & deductions from the DTCN (10)

EMD @ 1% must be deposited by the Bidder in Online Mode through the e_portal.
If a bidder withdraws or modifies their bid before the validity period, the EMD/ISD deposited shall be forfeited.
The successful tenderer shall deposit 1% of the accepted tendered amount towards Initial Security Deposit (ISD) within 7 days from the date of issue of the letter of intent.
Additional Performance Security (APS) will be calculated incrementally based on the Rounding Off of Percentage Less (ROPL) of the accepted Bid Price compared to the Cost Put to Tender.
APS is not required if ROPL is up to (-)10%.
APS is 0.2% for every percentage of ROPL below (-)10% but not below (-)20%.
APS is 2% plus 0.3% for every percentage of ROPL below (-)20% but not below (-)30%.
APS is 5% plus 0.5% for every percentage of ROPL below (-)30% or more.
The additional performance security shall be treated as part of the performance security and refunded upon successful completion of work within 7 days of completion certificate issuance.
During the guarantee period, the contractor must rectify defects within 15 days, or the cost will be deducted from the security money.

Source: Original DTCN

Frequently asked questions

Eligibility & bid requirements

DTCN analysed61 requirements extracted11 documents identifiedExtracted from the official tender document

Eligibility

6 items

Contractors must have a valid Civil license of requisite class (B, C, or D as per tender) registered with State RWSS/PHED/Irrigation/Minor Irrigations/RW/PWD.
Contractors must have a valid H.T. License issued by ELBO.
Both Civil and HT Licenses must be valid for at least 1 month from the date of tender opening.

Show 3 more

Contractors must have a valid GST Registration certificate and PAN issued by I.T. Department.
The joint venture agreement must be registered at the Sub-Register/District Registration Office as per the Registration Act 1908 and have an agreement period of not less than 18 months.
If the drilling contractor/owner of Rig and Electrical contractors make joint venture agreements with more than one Civil contractor in a single package, bids under the same package will not be considered and will be rejected.

Source: Original DTCNView source document

Experience

7 items

For Tube Well projects, bidders/contractors who do not own a DTH/Mud rotary Rig must submit a joint venture agreement with Rig owners/Contractors having ownership, executed in the court of the First-Class Magistrate/Executive Magistrate.
Bidders must have satisfactorily completed (not less than 80% of the original contract value) as prime contractor at least one similar work of not less than 40% of the proposed contract value at the FY of invitation of tender price level in the last 5 years.
A weightage of 10% per year shall be given to the cost of satisfactorily completed works of previous years to bring them to the current price level.

Show 4 more

Bidders who have been awarded similar works in the past but have shown unsatisfactory progress, or who have been declared as defaulter contractors, are not eligible.
In River Lift Projects, Civil and Electrical contractors with appropriate class and experience can participate through a joint venture agreement.
In Tube Well Projects, Rig owners/Contractors having ownership of Mud Rotary Rig/DTH Rig and a minimum of 3 years' experience in successful drilling works are eligible to participate in a joint venture agreement with appropriate class Civil and Electrical contractors.
The experience certificate of the drilling contractor must be issued by a competent authority not below the rank of Divisional Officer.

Source: Original DTCNView source document

Financial

10 items

EMD @ 1% must be deposited by the Bidder in Online Mode through the e_portal.
If a bidder withdraws or modifies their bid before the validity period, the EMD/ISD deposited shall be forfeited.
The successful tenderer shall deposit 1% of the accepted tendered amount towards Initial Security Deposit (ISD) within 7 days from the date of issue of the letter of intent.

Show 7 more

Additional Performance Security (APS) will be calculated incrementally based on the Rounding Off of Percentage Less (ROPL) of the accepted Bid Price compared to the Cost Put to Tender.
APS is not required if ROPL is up to (-)10%.
APS is 0.2% for every percentage of ROPL below (-)10% but not below (-)20%.
APS is 2% plus 0.3% for every percentage of ROPL below (-)20% but not below (-)30%.
APS is 5% plus 0.5% for every percentage of ROPL below (-)30% or more.
The additional performance security shall be treated as part of the performance security and refunded upon successful completion of work within 7 days of completion certificate issuance.
During the guarantee period, the contractor must rectify defects within 15 days, or the cost will be deducted from the security money.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

20 items

The work involves installation and energization of 50 new Tube Well Lift Irrigation Projects, including supply of materials and labor.
Contractors must erect HT, LT lines, commission Sub-Stations with all required materials, and hand over to TPSODL Electrical Division, Brahmapur after inspection by the Electrical Inspector.
Power supply work must adhere to REC specifications and sanctioned estimates provided by TPSODL, Electrical Division, Brahmapur.

Show 17 more

The project must be handed over to the concerned Pani Panchayat after completion of all works and a successful trial run in the presence of beneficiaries and the Engineer-in-Charge.
All construction works (Pump Chamber, Fixed foundation, Distribution Tank, ARV Tank, Butterfly Valve Tank, Supporting Pillar, HDPE Pipe Line, Road Crossing, Drilling of Bore) must be executed as per enclosed specifications (Annexure-II) and Engineer-in-Charge's direction.
Materials supplied must conform to specifications in Annexure-III for Civil works, and purchase bills must be submitted.
HDPE pipes must conform to IS-4985/2000 of BIS-Amendment-2, bear ISI Mark, and have pre-delivery and post-delivery test reports by CIPET, Odisha.
GI pipes must conform to IS-1239 (Pt 1/2004) and bear ISI certification mark.
Pumps must be 3 Phase Mono Block squirrel cage induction and centrifugal pump sets (with bronze impeller) having discharge 28 LPS at various heads, with BEE specification and energy efficiency.
Control Panel Starters must be Auto-Star delta type suitable for 10 HP to 15 HP squirrel cage induction motors, with overloaded and single phasing preventer, Volt Meter, Amper Meter & MCB.
Cables must be PVC insulated (heavy duty) armored aluminum cable conforming to IS-1554(Part 1)/1988.
PVC copper wire must conform to IS 694, be multi-strand of 4 mm2 size, and have an operating voltage of 1100 Volt.
Electrical consumable materials (PVC tape, black tape, fuse wire) should have ISI marked or be of good quality.
Main switches must conform to IS-4064/Part I & II with ISI Mark, be Triple pole & neutral, of voltage range 440 Volt, with Re-Wire able fuse of 63 AMP or 100 AMP.
GI Fittings, CI Foot Valve/NR Valve/Sluice Valve, CI Air Release Valve, and HDPE Fittings must conform to their respective IS standards and bear ISI Mark where applicable.
Electrical construction works must be executed as per REC standard and specification as per TPSODL, BOED, Brahmapur sanctioned estimate.
The contractor must arrange for testing of the transformer by an approved authority before commissioning and submit a successful test report and manufacturer's test certificate.
The contractor must arrange for inspection by the Electrical Inspector/Deputy Electrical Inspector/competent authority of TPSODL, Electrical Division, Brahmapur upon completion of electrical work and obtain approval for charging the Sub-Station.
The contractor must liaise with TPSODL, Electrical Division, Brahmapur for execution of agreement of Pani Panchayat, shut down, connection, charging of S/S, and handing over.
The contractor is responsible for all formalities needed for charging of S/S, including collection and submission of test reports, preparation of checklists, and liaison for installation of a 3 phase sub-station energy meter.

Source: Original DTCNView source document

Contract conditions

18 items

The approximate estimated cost for each project ranges from Rs. 18.31 Lakhs to Rs. 30.15 Lakhs.
The period of completion is 90 days for all projects from the date of issue of the work order.
The bid must be submitted online in a single cover system.

Show 15 more

The bids shall remain open for acceptance for a period of 365 days from the last date of receipt of bids.
The contractor has to quote the Percentage Rate excess or less up to two digits only after the decimal point.
If the contractor fails to produce original documents after being the successful lowest bidder, they shall be debarred for three years and blacklisted.
The successful tenderer must execute agreements with the Executive Engineer, L.I. Division, Brahmapur within 7 days from the date of issue of the letter of intent.
The agreement should be on an approved PWD Form.
If more than one bidder is L1, the tender will be decided through a transparent lottery system.
Not more than 7 packages shall ordinarily be awarded to a single contractor; the authority reserves the right to reject excess packages.
Payment to the contractor shall be made on a "First & Final bill" basis after successful trial and handing over of the project.
The contractor shall furnish a guarantee that all work items are free from defects for a period of not less than 18 months from the date of handing over.
Compensation for delay will be ½ percent on the estimated cost for every day the work remains uncompleted, up to a maximum of 10 percent of the estimated cost.
The contractor must complete one-fourth of the work before one-fourth of the time, one-half before one-half, and three-fourths before three-fourths of the time, or pay compensation of one-third percent on the estimated cost for each day of incomplete work.
The contractor shall bear all taxes including GST, Income Tax, Royalty, fair weather charges, and Labour cess.
The cost of water supply for works and bailing out water from foundations is to be borne by the contractor.
The contractor must obtain formal approval from the Electrical Inspector for energization of the sub-station, and inspection fees will be reimbursed by OLIC upon documentary evidence.
No payment will be made for partially completed power supply work; a completion certificate is issued only after full erection, inspection report, Pani Panchayat agreement, charging of Sub-Station, and handing over to TPSODL.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Costs

Estimated value

₹21,47,000

₹21.47 lakh

EMD / bid security

₹21,470

Exemption available for eligible bidders

Tender fee

₹7,080

Cost of bid document

Bid validity: 365 days

Security & deductions from the DTCN (10)

EMD @ 1% must be deposited by the Bidder in Online Mode through the e_portal.
If a bidder withdraws or modifies their bid before the validity period, the EMD/ISD deposited shall be forfeited.
The successful tenderer shall deposit 1% of the accepted tendered amount towards Initial Security Deposit (ISD) within 7 days from the date of issue of the letter of intent.
Additional Performance Security (APS) will be calculated incrementally based on the Rounding Off of Percentage Less (ROPL) of the accepted Bid Price compared to the Cost Put to Tender.
APS is not required if ROPL is up to (-)10%.
APS is 0.2% for every percentage of ROPL below (-)10% but not below (-)20%.
APS is 2% plus 0.3% for every percentage of ROPL below (-)20% but not below (-)30%.
APS is 5% plus 0.5% for every percentage of ROPL below (-)30% or more.
The additional performance security shall be treated as part of the performance security and refunded upon successful completion of work within 7 days of completion certificate issuance.
During the guarantee period, the contractor must rectify defects within 15 days, or the cost will be deducted from the security money.

Source: Original DTCN

Frequently asked questions

Mulakumari-V T/W

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

Mulakumari-V T/W

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more