What is the last date to bid for this tender?

Bids must be submitted on the Odisha eProcurement portal (tendersodisha.gov.in) by 17 Nov 2026, 05:00 PM. Bids are scheduled to open on 18 Nov 2026, 11:00 AM.

What is the estimated value of this tender?

The estimated tender value is ₹34.30 L (₹34,30,140).

How much EMD is required?

The EMD (bid security) is ₹34.3K (₹34,301). The portal lists EMD exemption as available for eligible bidders — check the DTCN for who qualifies.

Who can bid for this tender?

The DTCN states: The contractor should have a valid Civil license of 'B' & 'C' class registered with State RWSS/PHED/Irrigation/Minor Irrigations/RW/PWD; The contractor should have a valid H.T. license issued by ELBO with Employees validity.

What work experience is required?

As extracted from the DTCN: The bidder must have experience in successful completion of similar type of works (both Civil & Elect.), with certificates issued by an officer not below the rank of Executive Engineer.

What is the completion period?

The period of work is 120 days, and bids must remain valid for 90 days.

Which department issued this tender?

This tender was issued by Orissa Lift Irrigation Corporation, LI Western Circle Bhawanipatna, LI Division Subarnapur; the tender inviting authority is the E.E. L.I.Division, Subarnapur..

What documents are required to submit a bid?

The DTCN lists 18 documents, including Online payment transaction receipts for bid cost and EMD, Valid Registration Certificate, GSTIN Certificate, PAN Card, No Relation Certificate, Section-I of the DTCN downloaded and filled up, and 12 more.

OtherLive

Installation and energisation of SELEDI-XIV L.I.P. under BINIKA Block (BKVY RIDF-2026-27)

Sonepur Orissa Lift Irrigation CorporationLI Division Subarnapur

Tender ID 2026_OLIC_144836_16Ref OLIC-SNP-01/2026-27

Estimated value: ₹34.30 L
EMD: ₹34.3K; Exemption available
Tender fee: ₹7.1K
Work period: 120 days

Closing in

14 days left

17 Nov 2026, 05:00 PM

About this tender

Orissa Lift Irrigation Corporation has invited bids for “Installation and energisation of SELEDI-XIV L.I.P. under BINIKA Block (BKVY RIDF-2026-27)” in Sonepur district, Odisha. The estimated tender value is ₹34.30 lakh and the completion period is 120 days. Bids must be submitted by 17 Nov 2026, 05:00 PM.

Bid readiness

Based on the tender, not your profile

Done: Tender is currently open
Done: BOQ available · 49 items
Done: DTCN analysed · 51 requirements extracted
Done: 18 required documents identified
Needs review: Experience requirement needs review
Needs review: Financial requirements need review

Review requirements

Important dates

All times IST, as published on the portal

Published02 Nov 2026, 11:00 AM
Document downloadUntil 17 Nov 2026
Submission deadline· 14 days left17 Nov 2026, 05:00 PM
Bid opening18 Nov 2026, 11:00 AM

Tender intelligence

Eligibility & bid requirements

DTCN analysed51 requirements extracted18 documents identifiedExtracted from the official tender document

This tender from the Government of Odisha, Department of Water Resources, is for the installation and energization of new River Lift Irrigation Projects in Binika & Dunguripali Blocks of Subarnapur District. The work involves both civil and electrical components, including supply of materials, erection of HT/LT lines, commissioning of substations, and construction of various civil structures. Contractors need to have valid Civil and HT electrical licenses and experience in similar works. The project has a completion period of 120 days.

Eligibility

5 items

The contractor should have a valid Civil license of 'B' & 'C' class registered with State RWSS/PHED/Irrigation/Minor Irrigations/RW/PWD.
The contractor should have a valid H.T. license issued by ELBO with Employees validity.
Both Civil and HT licenses must be valid for at least 1 month from the date of tender opening.

Show 2 more

In case of joint venture, the Civil Contractor must be the 1st party with more than 51% share and be the prime contractor.
The contractor should have a valid GST Registration certificate and PAN issued by I.T. Department.

Source: Original DTCNView source document

Experience

1 item

The bidder must have experience in successful completion of similar type of works (both Civil & Elect.), with certificates issued by an officer not below the rank of Executive Engineer.

Source: Original DTCNView source document

Financial

7 items

Bid cost and EMD must be deposited through the payment gateway of the designated Bank.
Additional Performance Security is required if the bid amount is less than the estimated cost, with varying percentages based on the difference.
Affidavit and supporting documents for EMD exemption must be uploaded with the tender.

Show 4 more

Bidders withdrawing their bid or modifying terms before the validity period will forfeit their EMD.
If the bidder backs out before tender acceptance, the EMD will be forfeited.
The successful tenderer must deposit 2% of the accepted tendered amount as Initial Security Deposit (ISD) within 10 days of the letter of intent.
The security deposit will be released only after the completion of the guarantee period (18 months) to the satisfaction of the Executive Engineer.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

19 items

Construction works (Pump Chamber, Fixed foundation, Distribution Tank, ARV Tank, pipe laying) must be executed as per enclosed specifications and Engineer-in-Charge's direction.
Materials supplied must conform to relevant latest editions of BIS/REC specifications and codes of practices.
Electrical construction works (11 KV HT Line, 25/63/100 KVA Sub-Station, LT line, 11 KV Line D.P., Fencing of S/S) must be executed as per REC standard and specification and TPWODL sanctioned estimate.

Show 16 more

HDPE pipe (160mm/200mm/250mm/315mm dia, PE 80-PN4/PE 100-PN6) must conform to IS-4984/2016 with ISI Mark.
GI pipe must conform to IS-1239 (Pt 1/2004) and be ISI certified.
Pump sets must be 3 Phase Mono Block squirrel cage induction and centrifugal type (with bronze impeller) with BEE 3-Star rating and IS-9079/2002 compliance.
Starters must be Auto-Star delta type suitable for 10-15 HP motors with overload and single phasing preventer, Volt Meter, Amper Meter & MCB.
Cables must be PVC insulated (heavy duty) armored aluminum, conforming to IS-7098(Pt -II) for 1100 Volts at 50Hz.
PVC Copper Wire must be multi-strand 4 mm2 size, conforming to IS 694 for 1100 Volt operation.
Main switch must conform to IS-4064/Part I & II with ISI Mark, Triple pole & neutral, 440 Volt, 63 AMP or 100 AMP.
GI Fittings must conform to respective IS standards.
CI Foot Valve must be swing type, single disc, conforming to IS4038/1979.
CI NR Valve must have bypass arrangement and CI Sluice Valve must conform to IS-5312(part-I-2004 & IS-14846-2000 with ISI mark.
CI Air Release Valve must conform to IS 14845 with ISI mark.
HDPE fittings (Tee, bend, saddle, reducing sockets, FTA, tail piece, flange) must conform to IS 4984/2016 with ISI Mark.
The contractor must arrange for pre-delivery and post-delivery testing of HDPE pipes by CIPET, Odisha.
The contractor must arrange for inspection by the Electrical Inspector/Deputy Electrical Inspector/competent authority of TPWODL and obtain approval for charging the Sub-Station.
The contractor must liaison with TPWODL for agreement of Pani Panchayat, shut down, connection, charging of S/S, and handing over to TPWODL.
The contractor must submit the original bill of procured materials to TPWODL authority for verification and approval if required.

Source: Original DTCNView source document

Contract conditions

19 items

The offer must be open for acceptance for a period of 365 days from the date fixed for opening.
18% GST (CGST 9% & SGST 9%) on the paper cost must be deposited.
The bid must be submitted online with scanned copies of all required documents; hard copies are not required.

Show 16 more

The successful lowest bidder must submit originals of all scanned documents within 5 days from the bid opening date for verification.
If more than one bidder is L1 (quoting less than or equal to estimated cost), the tender will be decided through a transparent lottery system.
The contractor must quote the Percentage Rate excess or less up to two digits only after the decimal point.
Failure to produce original documents by the lowest successful bidder will result in debarment for three years and blacklisting.
The successful tenderer must execute agreements within 10 days from the date of issue of the letter of intent.
The completion period for the entire work is 120 days from the date of issue of the Work Order, with specific phased completion targets.
The contractor must furnish a guarantee against defects in materials and workmanship for 24 months from the date of handing over the project.
Payment will be made on a "First & Final bill" basis after successful trial and handing over of the project.
Compensation for delay is 0.5% of the estimated cost per day, not exceeding 10% of the estimated cost.
The contractor is liable for compensation if work is executed with unsound/imperfect workmanship or inferior materials, at 1% of the estimate per day for up to 10 days.
The contractor must give at least five days' written notice before covering up any work for measurement.
The contractor is responsible for damages to persons and property and must indemnify OLIC against claims.
The contractor must make arrangements for water supply and bailing out water at their own cost.
The contractor shall bear all taxes including GST, Income Tax, Royalty, fair weather charges, and Labour cess.
The contractor shall not sublet the work without the written approval of the Executive Engineer.
No claim shall be entertained for expenses made for tender submission in case of cancellation, rejection, or withdrawal of the tender.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Bill of quantities

49 priced items · ₹33.74 L (₹33,73,605)

Download BOQ file

Major components

Share of BOQ amount, grouped by item description

Plumbing & water supply67%₹22.61 L
Electrical12%₹4.19 L
Earthwork & excavation9%₹3.04 L
Plaster, paint & finishing4%₹1.19 L
Masonry3%₹1.06 L
Concrete & RCC3%₹88.0K

Largest items

By amount

Cost of 160 mm Ø HDPE Pipe PE -80 PN-4,Supplying of ISI marked High Density Polythelene (HDPE) Pipes for wate…Item 17 · 2,094 Mtr₹11.37 L
Labour charges for laying , fitting , Jointing & testing of 160 mm Ø HDPE pipe PE-80,PN4 etc.as direction of…Item 18 · 2,094 Mtr₹6.73 L
Construction and erection of 11 /0.4 KV, 63 KVA Double Pole mounted Substation Flat with Polymer insulator ,L…Item 48 · 1 No₹3.26 L
Cost of 200 mm ØHDPE PE 80-PN-4, Supplying of ISI marked High Density Polythelene (HDPE) Pipes for water supp…Item 19 · 300 Mtr₹2.52 L
Earthwork in excavation of foundation in hard soil such as Hard stiff clay, stiff black cotton, hard red eart…Item 1 · 1,445.4 cum₹1.84 L

Tender details

Tender reference: OLIC-SNP-01/2026-27
Tender ID: 2026_OLIC_144836_16
District: Sonepur
Location: Sonepur
Tender type: Open Tender
Tender category: Works
Period of work: 120 days

Show all 9 fields

Product category: Civil Works - Lift Irrigation Schemes
Pincode: 767017

Authority

State
Government of Odisha
Department
Orissa Lift Irrigation Corporation
Organisation
LI Western Circle Bhawanipatna
Office
LI Division Subarnapur
Inviting authority
E.E. L.I.Division, Subarnapur.

All Orissa Lift Irrigation Corporation tenders in Sonepur →

Costs

Estimated value: ₹34,30,140; ₹34.30 lakh
EMD / bid security: ₹34,301; Exemption available for eligible bidders
Tender fee: ₹7,080; Cost of bid document

Bid validity: 90 days

Security & deductions from the DTCN (7)

Bid cost and EMD must be deposited through the payment gateway of the designated Bank.
Additional Performance Security is required if the bid amount is less than the estimated cost, with varying percentages based on the difference.
Affidavit and supporting documents for EMD exemption must be uploaded with the tender.
Bidders withdrawing their bid or modifying terms before the validity period will forfeit their EMD.
If the bidder backs out before tender acceptance, the EMD will be forfeited.
The successful tenderer must deposit 2% of the accepted tendered amount as Initial Security Deposit (ISD) within 10 days of the letter of intent.
The security deposit will be released only after the completion of the guarantee period (18 months) to the satisfaction of the Executive Engineer.

Source: Original DTCN

Frequently asked questions

About this tender

Eligibility & bid requirements

DTCN analysed51 requirements extracted18 documents identifiedExtracted from the official tender document

Eligibility

5 items

The contractor should have a valid Civil license of 'B' & 'C' class registered with State RWSS/PHED/Irrigation/Minor Irrigations/RW/PWD.
The contractor should have a valid H.T. license issued by ELBO with Employees validity.
Both Civil and HT licenses must be valid for at least 1 month from the date of tender opening.

Show 2 more

In case of joint venture, the Civil Contractor must be the 1st party with more than 51% share and be the prime contractor.
The contractor should have a valid GST Registration certificate and PAN issued by I.T. Department.

Source: Original DTCNView source document

Experience

1 item

The bidder must have experience in successful completion of similar type of works (both Civil & Elect.), with certificates issued by an officer not below the rank of Executive Engineer.

Source: Original DTCNView source document

Financial

7 items

Bid cost and EMD must be deposited through the payment gateway of the designated Bank.
Additional Performance Security is required if the bid amount is less than the estimated cost, with varying percentages based on the difference.
Affidavit and supporting documents for EMD exemption must be uploaded with the tender.

Show 4 more

Bidders withdrawing their bid or modifying terms before the validity period will forfeit their EMD.
If the bidder backs out before tender acceptance, the EMD will be forfeited.
The successful tenderer must deposit 2% of the accepted tendered amount as Initial Security Deposit (ISD) within 10 days of the letter of intent.
The security deposit will be released only after the completion of the guarantee period (18 months) to the satisfaction of the Executive Engineer.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

19 items

Construction works (Pump Chamber, Fixed foundation, Distribution Tank, ARV Tank, pipe laying) must be executed as per enclosed specifications and Engineer-in-Charge's direction.
Materials supplied must conform to relevant latest editions of BIS/REC specifications and codes of practices.
Electrical construction works (11 KV HT Line, 25/63/100 KVA Sub-Station, LT line, 11 KV Line D.P., Fencing of S/S) must be executed as per REC standard and specification and TPWODL sanctioned estimate.

Show 16 more

HDPE pipe (160mm/200mm/250mm/315mm dia, PE 80-PN4/PE 100-PN6) must conform to IS-4984/2016 with ISI Mark.
GI pipe must conform to IS-1239 (Pt 1/2004) and be ISI certified.
Pump sets must be 3 Phase Mono Block squirrel cage induction and centrifugal type (with bronze impeller) with BEE 3-Star rating and IS-9079/2002 compliance.
Starters must be Auto-Star delta type suitable for 10-15 HP motors with overload and single phasing preventer, Volt Meter, Amper Meter & MCB.
Cables must be PVC insulated (heavy duty) armored aluminum, conforming to IS-7098(Pt -II) for 1100 Volts at 50Hz.
PVC Copper Wire must be multi-strand 4 mm2 size, conforming to IS 694 for 1100 Volt operation.
Main switch must conform to IS-4064/Part I & II with ISI Mark, Triple pole & neutral, 440 Volt, 63 AMP or 100 AMP.
GI Fittings must conform to respective IS standards.
CI Foot Valve must be swing type, single disc, conforming to IS4038/1979.
CI NR Valve must have bypass arrangement and CI Sluice Valve must conform to IS-5312(part-I-2004 & IS-14846-2000 with ISI mark.
CI Air Release Valve must conform to IS 14845 with ISI mark.
HDPE fittings (Tee, bend, saddle, reducing sockets, FTA, tail piece, flange) must conform to IS 4984/2016 with ISI Mark.
The contractor must arrange for pre-delivery and post-delivery testing of HDPE pipes by CIPET, Odisha.
The contractor must arrange for inspection by the Electrical Inspector/Deputy Electrical Inspector/competent authority of TPWODL and obtain approval for charging the Sub-Station.
The contractor must liaison with TPWODL for agreement of Pani Panchayat, shut down, connection, charging of S/S, and handing over to TPWODL.
The contractor must submit the original bill of procured materials to TPWODL authority for verification and approval if required.

Source: Original DTCNView source document

Contract conditions

19 items

The offer must be open for acceptance for a period of 365 days from the date fixed for opening.
18% GST (CGST 9% & SGST 9%) on the paper cost must be deposited.
The bid must be submitted online with scanned copies of all required documents; hard copies are not required.

Show 16 more

The successful lowest bidder must submit originals of all scanned documents within 5 days from the bid opening date for verification.
If more than one bidder is L1 (quoting less than or equal to estimated cost), the tender will be decided through a transparent lottery system.
The contractor must quote the Percentage Rate excess or less up to two digits only after the decimal point.
Failure to produce original documents by the lowest successful bidder will result in debarment for three years and blacklisting.
The successful tenderer must execute agreements within 10 days from the date of issue of the letter of intent.
The completion period for the entire work is 120 days from the date of issue of the Work Order, with specific phased completion targets.
The contractor must furnish a guarantee against defects in materials and workmanship for 24 months from the date of handing over the project.
Payment will be made on a "First & Final bill" basis after successful trial and handing over of the project.
Compensation for delay is 0.5% of the estimated cost per day, not exceeding 10% of the estimated cost.
The contractor is liable for compensation if work is executed with unsound/imperfect workmanship or inferior materials, at 1% of the estimate per day for up to 10 days.
The contractor must give at least five days' written notice before covering up any work for measurement.
The contractor is responsible for damages to persons and property and must indemnify OLIC against claims.
The contractor must make arrangements for water supply and bailing out water at their own cost.
The contractor shall bear all taxes including GST, Income Tax, Royalty, fair weather charges, and Labour cess.
The contractor shall not sublet the work without the written approval of the Executive Engineer.
No claim shall be entertained for expenses made for tender submission in case of cancellation, rejection, or withdrawal of the tender.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Costs

Estimated value

₹34,30,140

₹34.30 lakh

EMD / bid security

₹34,301

Exemption available for eligible bidders

Tender fee

₹7,080

Cost of bid document

Bid validity: 90 days

Security & deductions from the DTCN (7)

Bid cost and EMD must be deposited through the payment gateway of the designated Bank.
Additional Performance Security is required if the bid amount is less than the estimated cost, with varying percentages based on the difference.
Affidavit and supporting documents for EMD exemption must be uploaded with the tender.
Bidders withdrawing their bid or modifying terms before the validity period will forfeit their EMD.
If the bidder backs out before tender acceptance, the EMD will be forfeited.
The successful tenderer must deposit 2% of the accepted tendered amount as Initial Security Deposit (ISD) within 10 days of the letter of intent.
The security deposit will be released only after the completion of the guarantee period (18 months) to the satisfaction of the Executive Engineer.

Source: Original DTCN

Frequently asked questions

Installation and energisation of SELEDI-XIV L.I.P. under BINIKA Block (BKVY RIDF-2026-27)

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

Installation and energisation of SELEDI-XIV L.I.P. under BINIKA Block (BKVY RIDF-2026-27)

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more