What is the last date to bid for this tender?

Bids must be submitted on the Odisha eProcurement portal (tendersodisha.gov.in) by 17 Nov 2026, 05:00 PM. Bids are scheduled to open on 18 Nov 2026, 11:00 AM.

What is the estimated value of this tender?

The estimated tender value is ₹34.30 L (₹34,30,140).

How much EMD is required?

The EMD (bid security) is ₹34.3K (₹34,301). The portal lists EMD exemption as available for eligible bidders — check the DTCN for who qualifies.

Who can bid for this tender?

The DTCN states: The contractor should have a valid Civil license of 'B' & 'C' class registered with State RWSS/PHED/Irrigation/Minor Irrigations/RW/PWD; The contractor should have a valid H.T. license issued by ELBO with Employees validity.

What work experience is required?

As extracted from the DTCN: The bidder must have experience in successful completion of similar type of works (both Civil & Elect.), with certificates issued by an officer not below the rank of Executive Engineer.

What is the completion period?

The period of work is 120 days, and bids must remain valid for 90 days.

Which department issued this tender?

This tender was issued by Orissa Lift Irrigation Corporation, LI Western Circle Bhawanipatna, LI Division Subarnapur; the tender inviting authority is the E.E. L.I.Division, Subarnapur..

What documents are required to submit a bid?

The DTCN lists 19 documents, including Online payment transaction receipts for bid cost and EMD, Valid Registration Certificate, GSTIN Certificate, PAN Card, No Relation Certificate, Section-I of the DTCN (downloaded and filled), and 13 more.

OtherLive

Installation and energisation of SELEDI-XIII L.I.P. under BINIKA Block (BKVY RIDF-2026-27)

Sonepur Orissa Lift Irrigation CorporationLI Division Subarnapur

Tender ID 2026_OLIC_144836_14Ref OLIC-SNP-01/2026-27

Estimated value: ₹34.30 L
EMD: ₹34.3K; Exemption available
Tender fee: ₹7.1K
Work period: 120 days

Closing in

14 days left

17 Nov 2026, 05:00 PM

About this tender

Orissa Lift Irrigation Corporation has invited bids for “Installation and energisation of SELEDI-XIII L.I.P. under BINIKA Block (BKVY RIDF-2026-27)” in Sonepur district, Odisha. The estimated tender value is ₹34.30 lakh and the completion period is 120 days. Bids must be submitted by 17 Nov 2026, 05:00 PM.

Bid readiness

Based on the tender, not your profile

Done: Tender is currently open
Done: BOQ available · 49 items
Done: DTCN analysed · 51 requirements extracted
Done: 19 required documents identified
Needs review: Experience requirement needs review
Needs review: Financial requirements need review

Review requirements

Important dates

All times IST, as published on the portal

Published02 Nov 2026, 11:00 AM
Document downloadUntil 17 Nov 2026
Submission deadline· 14 days left17 Nov 2026, 05:00 PM
Bid opening18 Nov 2026, 11:00 AM

Tender intelligence

Eligibility & bid requirements

DTCN analysed51 requirements extracted19 documents identifiedExtracted from the official tender document

This tender from the Odisha Department of Water Resources is for the installation and energization of new River Lift Irrigation Projects in the Binika and Dunguripali Blocks of Subarnapur District. The work involves both civil and electrical components, including supply of materials, erection of HT/LT lines, commissioning of substations, and construction of various civil structures. Contractors must hold valid Civil and HT electrical licenses and have experience in similar integrated civil and electrical works. The project has a completion period of 120 days.

Eligibility

5 items

The contractor should have a valid Civil license of 'B' & 'C' class registered with State RWSS/PHED/Irrigation/Minor Irrigations/RW/PWD.
The contractor should have a valid H.T. license issued by ELBO with Employees validity.
The validity of both Civil and H.T. licenses should be for a period of at least 1 month from the date of the opening of the tender.

Show 2 more

In case the Contractor has only a Civil or Electrical license, a registered joint venture agreement with the respective other contractor is required, with the Civil Contractor as the 1st party having more than 51% share and acting as the prime contractor.
The contractor should have a valid GST Registration certificate and PAN issued by I.T. Department.

Source: Original DTCNView source document

Experience

1 item

The bidder must have experience in successful completion of similar type of works (both Civil & Elect.), with certificates issued by an officer not below the rank of Executive Engineer.

Source: Original DTCNView source document

Financial

6 items

Bid cost and EMD must be deposited through the payment gateway of the designated Bank.
Additional Performance Security (APS) is required if the bid amount is less than the estimated cost, with varying percentages based on the difference.
APS must be furnished within 7 days of the letter of intent, otherwise the bid will be cancelled and security deposit forfeited, with blacklisting proceedings initiated.

Show 3 more

Affidavit and supporting documents for EMD exemption claims must be uploaded with the tender.
Initial Security Deposit (ISD) of 2% of the accepted tendered amount must be deposited within 10 days from the date of issue of the letter of intent.
The security deposit will be released only after the completion of the guarantee period (18 months) to the satisfaction of the Executive Engineer.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

24 items

All construction works (Pump Chamber, Fixed foundation, Distribution Tank, ARV Tank, pipe laying) are to be executed as per enclosed specifications and Engineer-in-Charge's direction.
Materials supplied must conform to relevant latest editions of BIS/REC specifications and codes of practices.
Electrical construction works must be executed as per REC standard and specification per TPWODL sanctioned estimate.

Show 21 more

The contractor must supply all materials for erection of 3 Phase 11 KV HT line and erect it as per REC specifications.
The contractor must supply all materials for commissioning of 1 No. 11/0.4 KV 25 KVA / 63 KVA / 100 KVA Sub-Station as per REC standard and specification.
The contractor must supply all materials for erection of LT line with A.B. Cable / AAA Conductor as per REC standard.
Materials for erection of 1 No. 11 KV 3 Phase line D.P. must be as per REC standard and specification.
Brick masonry fencing for the Sub-Station must be as per TPWODL sanctioned estimate.
The transformer to be installed must be tested by an approved authority before commissioning, and a successful test report must be submitted.
The contractor must arrange for inspection by the Electrical Inspector/Deputy Electrical Inspector/competent authority of TPWODL and obtain approval for charging the Sub-Station.
The contractor must liaise with TPWODL for execution of agreement of Pani Panchayat with TPWODL, shut down, connection, charging of S/S, and handing over.
The contractor must handle formalities for charging of S/S, including test report submission, checklist preparation, and liaison for 3 phase sub-station energy meter installation.
HDPE pipes must conform to IS-4984/2016, be ISI Marked, and have pre-delivery and post-delivery test reports by CIPET, Odisha.
G.I. pipes must conform to IS-1239 (Pt 1/2004) and bear ISI certification mark.
Pumps must be 3 Phase Mono Block squirrel cage induction and centrifugal type (with bronze impeller), having BEE specification, 3-Star rated, and IS-9079/2002 compliant.
Starters must be Auto-Star delta type suitable for 10 HP to 15 HP squirrel cage induction motors, with overload and single phasing preventer, Volt Meter, Amper Meter & MCB.
PVC insulated (heavy duty) armored aluminum cable must conform to IS-7098(Pt -II) for 1100 Volts at 50Hz.
PVC copper wire for connecting pump to starter and starter to main switch must conform to IS 694, be multi-strand 4 mm2 size, and for 1100 Volt operation.
Main switch must conform to IS-4064/Part I & II with ISI Mark, be Triple pole & neutral, and for 440 Volt of 63 AMP or 100 AMP.
G.I. Fittings must conform to respective IS standards.
C.I. Foot Valve must be swing type with single disc conforming to IS4038/1979.
C.I. NR Valve must have bypass arrangement and Sluice Valve must conform to respective IS-5312(part-I-2004 & IS-14846-2000 Standard with ISI mark.
C.I. Air Release Valve must conform to IS 14845 with ISI mark.
HDPE fittings (Tee, bend, saddle, reducing sockets, FTA, tail piece, flange) must conform to IS 4984/2016 with ISI Mark.

Source: Original DTCNView source document

Contract conditions

15 items

The offer must remain open for acceptance for a period of 365 days from the date fixed for opening the tender.
18% GST (CGST 9% & SGST 9%) on the paper cost must be deposited.
The bid must be submitted online with scanned copies of all required documents; hard copies are not required.

Show 12 more

The successful lowest bidder must submit the originals of all scanned documents within 5 days from the bid opening date for verification.
If multiple bidders are L1, a transparent lottery system will decide the tender.
The completion period for the entire work is 120 days from the date of issue of the Work Order, with specific phased completion targets.
The contractor must furnish a guarantee against defects in materials and workmanship for 24 months from the date of handing over the project.
Payment will be made on a "First & Final bill" basis after successful trial, project handover to Pani Panchayat/TPWODL, and receipt of a completion certificate.
Compensation for delay is 0.5% of the estimated cost per day, not exceeding 10% of the estimated cost.
The contractor is responsible for all taxes, including GST, Income Tax, Royalty, fair weather charges, and Labour cess.
The contractor must make arrangements for water supply and bailing out water from foundations at their own cost.
The contractor shall not employ any person below 18 years of age and must pay wages not less than those prescribed by the Government of Odisha.
The contractor shall not sublet the work without the written approval of the Executive Engineer.
Any change in the constitution of the firm must be notified to the Engineer-in-Charge within fifteen days.
The contractor must quote the Percentage Rate excess or less up to two digits only after the decimal point; only the first two digits will be considered without rounding if more are quoted.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Bill of quantities

49 priced items · ₹33.74 L (₹33,73,605)

Download BOQ file

Major components

Share of BOQ amount, grouped by item description

Plumbing & water supply67%₹22.61 L
Electrical12%₹4.19 L
Earthwork & excavation9%₹3.04 L
Plaster, paint & finishing4%₹1.19 L
Masonry3%₹1.06 L
Concrete & RCC3%₹88.0K

Largest items

By amount

Cost of 160 mm Ø HDPE Pipe PE -80 PN-4,Supplying of ISI marked High Density Polythelene (HDPE) Pipes for wate…Item 17 · 2,094 Mtr₹11.37 L
Labour charges for laying , fitting , Jointing & testing of 160 mm Ø HDPE pipe PE-80,PN4 etc.as direction of…Item 18 · 2,094 Mtr₹6.73 L
Construction and erection of 11 /0.4 KV, 63 KVA Double Pole mounted Substation Flat with Polymer insulator ,L…Item 48 · 1 No₹3.26 L
Cost of 200 mm ØHDPE PE 80-PN-4, Supplying of ISI marked High Density Polythelene (HDPE) Pipes for water supp…Item 19 · 300 Mtr₹2.52 L
Earthwork in excavation of foundation in hard soil such as Hard stiff clay, stiff black cotton, hard red eart…Item 1 · 1,445.4 cum₹1.84 L

Tender details

Tender reference: OLIC-SNP-01/2026-27
Tender ID: 2026_OLIC_144836_14
District: Sonepur
Location: Sonepur
Tender type: Open Tender
Tender category: Works
Period of work: 120 days

Show all 9 fields

Product category: Civil Works - Lift Irrigation Schemes
Pincode: 767017

Authority

State
Government of Odisha
Department
Orissa Lift Irrigation Corporation
Organisation
LI Western Circle Bhawanipatna
Office
LI Division Subarnapur
Inviting authority
E.E. L.I.Division, Subarnapur.

All Orissa Lift Irrigation Corporation tenders in Sonepur →

Costs

Estimated value: ₹34,30,140; ₹34.30 lakh
EMD / bid security: ₹34,301; Exemption available for eligible bidders
Tender fee: ₹7,080; Cost of bid document

Bid validity: 90 days

Security & deductions from the DTCN (6)

Bid cost and EMD must be deposited through the payment gateway of the designated Bank.
Additional Performance Security (APS) is required if the bid amount is less than the estimated cost, with varying percentages based on the difference.
APS must be furnished within 7 days of the letter of intent, otherwise the bid will be cancelled and security deposit forfeited, with blacklisting proceedings initiated.
Affidavit and supporting documents for EMD exemption claims must be uploaded with the tender.
Initial Security Deposit (ISD) of 2% of the accepted tendered amount must be deposited within 10 days from the date of issue of the letter of intent.
The security deposit will be released only after the completion of the guarantee period (18 months) to the satisfaction of the Executive Engineer.

Source: Original DTCN

Frequently asked questions

About this tender

Eligibility & bid requirements

DTCN analysed51 requirements extracted19 documents identifiedExtracted from the official tender document

Eligibility

5 items

The contractor should have a valid Civil license of 'B' & 'C' class registered with State RWSS/PHED/Irrigation/Minor Irrigations/RW/PWD.
The contractor should have a valid H.T. license issued by ELBO with Employees validity.
The validity of both Civil and H.T. licenses should be for a period of at least 1 month from the date of the opening of the tender.

Show 2 more

In case the Contractor has only a Civil or Electrical license, a registered joint venture agreement with the respective other contractor is required, with the Civil Contractor as the 1st party having more than 51% share and acting as the prime contractor.
The contractor should have a valid GST Registration certificate and PAN issued by I.T. Department.

Source: Original DTCNView source document

Experience

1 item

The bidder must have experience in successful completion of similar type of works (both Civil & Elect.), with certificates issued by an officer not below the rank of Executive Engineer.

Source: Original DTCNView source document

Financial

6 items

Bid cost and EMD must be deposited through the payment gateway of the designated Bank.
Additional Performance Security (APS) is required if the bid amount is less than the estimated cost, with varying percentages based on the difference.
APS must be furnished within 7 days of the letter of intent, otherwise the bid will be cancelled and security deposit forfeited, with blacklisting proceedings initiated.

Show 3 more

Affidavit and supporting documents for EMD exemption claims must be uploaded with the tender.
Initial Security Deposit (ISD) of 2% of the accepted tendered amount must be deposited within 10 days from the date of issue of the letter of intent.
The security deposit will be released only after the completion of the guarantee period (18 months) to the satisfaction of the Executive Engineer.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

24 items

All construction works (Pump Chamber, Fixed foundation, Distribution Tank, ARV Tank, pipe laying) are to be executed as per enclosed specifications and Engineer-in-Charge's direction.
Materials supplied must conform to relevant latest editions of BIS/REC specifications and codes of practices.
Electrical construction works must be executed as per REC standard and specification per TPWODL sanctioned estimate.

Show 21 more

The contractor must supply all materials for erection of 3 Phase 11 KV HT line and erect it as per REC specifications.
The contractor must supply all materials for commissioning of 1 No. 11/0.4 KV 25 KVA / 63 KVA / 100 KVA Sub-Station as per REC standard and specification.
The contractor must supply all materials for erection of LT line with A.B. Cable / AAA Conductor as per REC standard.
Materials for erection of 1 No. 11 KV 3 Phase line D.P. must be as per REC standard and specification.
Brick masonry fencing for the Sub-Station must be as per TPWODL sanctioned estimate.
The transformer to be installed must be tested by an approved authority before commissioning, and a successful test report must be submitted.
The contractor must arrange for inspection by the Electrical Inspector/Deputy Electrical Inspector/competent authority of TPWODL and obtain approval for charging the Sub-Station.
The contractor must liaise with TPWODL for execution of agreement of Pani Panchayat with TPWODL, shut down, connection, charging of S/S, and handing over.
The contractor must handle formalities for charging of S/S, including test report submission, checklist preparation, and liaison for 3 phase sub-station energy meter installation.
HDPE pipes must conform to IS-4984/2016, be ISI Marked, and have pre-delivery and post-delivery test reports by CIPET, Odisha.
G.I. pipes must conform to IS-1239 (Pt 1/2004) and bear ISI certification mark.
Pumps must be 3 Phase Mono Block squirrel cage induction and centrifugal type (with bronze impeller), having BEE specification, 3-Star rated, and IS-9079/2002 compliant.
Starters must be Auto-Star delta type suitable for 10 HP to 15 HP squirrel cage induction motors, with overload and single phasing preventer, Volt Meter, Amper Meter & MCB.
PVC insulated (heavy duty) armored aluminum cable must conform to IS-7098(Pt -II) for 1100 Volts at 50Hz.
PVC copper wire for connecting pump to starter and starter to main switch must conform to IS 694, be multi-strand 4 mm2 size, and for 1100 Volt operation.
Main switch must conform to IS-4064/Part I & II with ISI Mark, be Triple pole & neutral, and for 440 Volt of 63 AMP or 100 AMP.
G.I. Fittings must conform to respective IS standards.
C.I. Foot Valve must be swing type with single disc conforming to IS4038/1979.
C.I. NR Valve must have bypass arrangement and Sluice Valve must conform to respective IS-5312(part-I-2004 & IS-14846-2000 Standard with ISI mark.
C.I. Air Release Valve must conform to IS 14845 with ISI mark.
HDPE fittings (Tee, bend, saddle, reducing sockets, FTA, tail piece, flange) must conform to IS 4984/2016 with ISI Mark.

Source: Original DTCNView source document

Contract conditions

15 items

The offer must remain open for acceptance for a period of 365 days from the date fixed for opening the tender.
18% GST (CGST 9% & SGST 9%) on the paper cost must be deposited.
The bid must be submitted online with scanned copies of all required documents; hard copies are not required.

Show 12 more

The successful lowest bidder must submit the originals of all scanned documents within 5 days from the bid opening date for verification.
If multiple bidders are L1, a transparent lottery system will decide the tender.
The completion period for the entire work is 120 days from the date of issue of the Work Order, with specific phased completion targets.
The contractor must furnish a guarantee against defects in materials and workmanship for 24 months from the date of handing over the project.
Payment will be made on a "First & Final bill" basis after successful trial, project handover to Pani Panchayat/TPWODL, and receipt of a completion certificate.
Compensation for delay is 0.5% of the estimated cost per day, not exceeding 10% of the estimated cost.
The contractor is responsible for all taxes, including GST, Income Tax, Royalty, fair weather charges, and Labour cess.
The contractor must make arrangements for water supply and bailing out water from foundations at their own cost.
The contractor shall not employ any person below 18 years of age and must pay wages not less than those prescribed by the Government of Odisha.
The contractor shall not sublet the work without the written approval of the Executive Engineer.
Any change in the constitution of the firm must be notified to the Engineer-in-Charge within fifteen days.
The contractor must quote the Percentage Rate excess or less up to two digits only after the decimal point; only the first two digits will be considered without rounding if more are quoted.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Costs

Estimated value

₹34,30,140

₹34.30 lakh

EMD / bid security

₹34,301

Exemption available for eligible bidders

Tender fee

₹7,080

Cost of bid document

Bid validity: 90 days

Security & deductions from the DTCN (6)

Bid cost and EMD must be deposited through the payment gateway of the designated Bank.
Additional Performance Security (APS) is required if the bid amount is less than the estimated cost, with varying percentages based on the difference.
APS must be furnished within 7 days of the letter of intent, otherwise the bid will be cancelled and security deposit forfeited, with blacklisting proceedings initiated.
Affidavit and supporting documents for EMD exemption claims must be uploaded with the tender.
Initial Security Deposit (ISD) of 2% of the accepted tendered amount must be deposited within 10 days from the date of issue of the letter of intent.
The security deposit will be released only after the completion of the guarantee period (18 months) to the satisfaction of the Executive Engineer.

Source: Original DTCN

Frequently asked questions

Installation and energisation of SELEDI-XIII L.I.P. under BINIKA Block (BKVY RIDF-2026-27)

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

Installation and energisation of SELEDI-XIII L.I.P. under BINIKA Block (BKVY RIDF-2026-27)

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more