What is the last date to bid for this tender?

Bids must be submitted on the Odisha eProcurement portal (tendersodisha.gov.in) by 17 Nov 2026, 05:00 PM. Bids are scheduled to open on 18 Nov 2026, 11:00 AM.

What is the estimated value of this tender?

The estimated tender value is ₹34.30 L (₹34,30,085).

How much EMD is required?

The EMD (bid security) is ₹34.3K (₹34,301). The portal lists EMD exemption as available for eligible bidders — check the DTCN for who qualifies.

Who can bid for this tender?

The DTCN states: The contractor must have a valid Civil license of requisite class ("B" & "C" as per tender) registered with State RWSS/PHED/Irrigation/Minor Irrigations/RW/PWD; The contractor must have a valid H.T. license issued by ELBO with Employees validity.

What work experience is required?

As extracted from the DTCN: The bidder must have experience in successful completion of similar type of works (both Civil & Elect.), with certificates issued by an officer not below the rank of Executive Engineer.

What is the completion period?

The period of work is 120 days, and bids must remain valid for 90 days.

Which department issued this tender?

This tender was issued by Orissa Lift Irrigation Corporation, LI Western Circle Bhawanipatna, LI Division Subarnapur; the tender inviting authority is the E.E. L.I.Division, Subarnapur..

What documents are required to submit a bid?

The DTCN lists 13 documents, including Online payment transaction receipts/over the counter receipts for bid cost and EMD, Valid Registration Certificate (Civil and HT Electrical), GSTIN Certificate, PAN Card, No Relation Certificate, Section-I of the DTCN downloaded and filled up, and 7 more.

OtherLive

Installation and energisation of PATHARAKHANDI-X L.I.P. under BINIKA Block (BKVY RIDF-2026-27)

Sonepur Orissa Lift Irrigation CorporationLI Division Subarnapur

Tender ID 2026_OLIC_144836_7Ref OLIC-SNP-01/2026-27

Estimated value: ₹34.30 L
EMD: ₹34.3K; Exemption available
Tender fee: ₹7.1K
Work period: 120 days

Closing in

14 days left

17 Nov 2026, 05:00 PM

About this tender

Orissa Lift Irrigation Corporation has invited bids for “Installation and energisation of PATHARAKHANDI-X L.I.P. under BINIKA Block (BKVY RIDF-2026-27)” in Sonepur district, Odisha. The estimated tender value is ₹34.30 lakh and the completion period is 120 days. Bids must be submitted by 17 Nov 2026, 05:00 PM.

Bid readiness

Based on the tender, not your profile

Done: Tender is currently open
Done: BOQ available · 58 items
Done: DTCN analysed · 40 requirements extracted
Done: 13 required documents identified
Needs review: Experience requirement needs review
Needs review: Financial requirements need review

Review requirements

Important dates

All times IST, as published on the portal

Published02 Nov 2026, 11:00 AM
Document downloadUntil 17 Nov 2026
Submission deadline· 14 days left17 Nov 2026, 05:00 PM
Bid opening18 Nov 2026, 11:00 AM

Tender intelligence

Eligibility & bid requirements

DTCN analysed40 requirements extracted13 documents identifiedExtracted from the official tender document

This tender from the Government of Odisha, Department of Water Resources, is for the installation and energization of new River Lift Irrigation Projects in Binika & Dunguripali Blocks of Subarnapur District. The work involves both civil and electrical components, including supply of materials, erection of HT/LT lines, commissioning of substations, and construction of various civil structures. Contractors must hold valid Civil and HT electrical licenses and have experience in similar integrated civil and electrical works. The project has a completion period of 120 days.

Eligibility

5 items

The contractor must have a valid Civil license of requisite class ("B" & "C" as per tender) registered with State RWSS/PHED/Irrigation/Minor Irrigations/RW/PWD.
The contractor must have a valid H.T. license issued by ELBO with Employees validity.
The validity of both Civil and H.T. licenses must be for a period of at least 1 month from the date of opening of the tender.

Show 2 more

In case of joint venture, the Civil Contractor must be the 1st party with more than 51% share and be the prime contractor.
The contractor must have a valid GST Registration certificate and PAN issued by I.T. Department.

Source: Original DTCNView source document

Experience

1 item

The bidder must have experience in successful completion of similar type of works (both Civil & Elect.), with certificates issued by an officer not below the rank of Executive Engineer.

Source: Original DTCNView source document

Financial

4 items

Bid cost and EMD must be deposited through the payment gateway of the designated Bank.
Additional Performance Security (APS) is required if the bid amount is less than the estimated cost, with varying percentages based on the difference.
The successful tenderer must deposit 2% of the accepted tendered amount as Initial Security Deposit (ISD) within 10 days of the letter of intent.

Show 1 more

The security deposit will be released only after completion of the guarantee period (18 months) to the full satisfaction of the Executive Engineer.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

17 items

All construction works (Pump Chamber, Fixed foundation, Distribution Tank, ARV Tank, pipe laying) must be executed as per enclosed specifications and Engineer-in-Charge's direction.
Materials supplied must conform to relevant latest editions of BIS/REC specifications and codes of practices.
The contractor must submit purchase bills of all materials with the bill of works.

Show 14 more

HDPE pipes must conform to IS-4984/2016 (PE 80-PN4/PE 100-PN6) with ISI Mark, and both pre-delivery and post-delivery test reports by CIPET, Odisha, are required.
G.I. pipes must conform to IS-1239 (Pt 1/2004) with ISI certification mark.
Pumps must be 3 Phase Mono Block squirrel cage induction and centrifugal type (with bronze impeller), BEE 3-Star rated, and conform to IS-9079/2002.
Starters must be Auto-Star delta type suitable for 10-15 HP squirrel cage induction motors, with overload and single phasing preventer, Volt Meter, Amper Meter & MCB.
Cables must be PVC insulated (heavy duty) armored aluminum, conforming to IS-7098(Pt -II) for 1100 Volts at 50Hz.
PVC Copper Wire must be multi-strand 4 mm2 size, conforming to IS 694 for 1100 Volt operation.
Main Switch must conform to IS-4064/Part I & II with ISI Mark (Triple pole & neutral, 440 Volt, 63 AMP or 100 AMP re-wireable fuse).
G.I. Fittings must conform to respective IS standards.
C.I. Foot Valve/NR Valve/Sluice Valve must conform to IS4038/1979, IS-5312(part-I-2004 & IS-14846-2000 respectively with ISI mark.
C.I. Air Release Valve must conform to IS 14845 with ISI mark.
HDPE fittings must conform to IS 4984/2016 with ISI Mark.
Electrical construction works must be executed as per REC standard and specification as per TPWODL sanctioned estimate.
The contractor must arrange for testing of the transformer by an approved authority before commissioning and submit the test report.
The contractor must arrange for inspection by the Electrical Inspector/Deputy Electrical Inspector/competent authority of TPWODL and obtain approval for charging the Sub-Station.

Source: Original DTCNView source document

Contract conditions

13 items

The offer must remain open for acceptance for a period of 365 days from the date fixed for opening the tender.
18% GST (CGST 9% & SGST 9%) on the paper cost must be deposited.
The successful lowest bidder must submit the originals of all scanned documents within 5 days from the date of bid opening for verification.

Show 10 more

If more than one bidder is L1 quoting less than or equal to the estimated cost, the tender will be decided through a transparent lottery system.
The successful tenderer must execute agreements within 10 days from the date of issue of the letter of intent.
The contractor must quote the Percentage Rate excess or less up to two digits only after the decimal point.
The completion period for the entire work is 120 days from the date of issue of the Work Order, with specific phased completion targets.
The contractor must furnish a guarantee for 24 months from the date of handing over the project, covering defects in materials and workmanship.
Payment to the contractor will be made on a "First & Final bill" basis after successful trial and handing over of the project.
Compensation for delay will be 0.5% of the estimated cost per day, not exceeding 10% of the estimated cost.
The contractor is responsible for all taxes including GST, Income Tax, Royalty, fair weather charges, and Labour cess.
The contractor shall not sublet the work without the written approval of the Executive Engineer.
Unilateral stoppage of work by the contractor without prior written permission will be considered a breach of contract.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Bill of quantities

58 priced items · ₹33.74 L (₹33,73,550)

Download BOQ file

Major components

Share of BOQ amount, grouped by item description

Plumbing & water supply57%₹19.39 L
Electrical12%₹4.20 L
Plaster, paint & finishing8%₹2.64 L
Earthwork & excavation7%₹2.40 L
Concrete & RCC5%₹1.84 L
Masonry5%₹1.65 L

Largest items

By amount

Cost of 200 mm ØHDPE PE 80-PN-4, Supplying of ISI marked High Density Polythelene (HDPE) Pipes for water supp…Item 28 · 822 Mtr₹6.89 L
Cost of 160 mm Ø HDPE Pipe PE -80 PN-4,Supplying of ISI marked High Density Polythelene (HDPE) Pipes for wate…Item 26 · 942 Mtr₹5.12 L
Labour charges for laying , fitting , Jointing & testing of 200 mm Ø dia HDPE pipe PE-80,PN4 etc.as direction…Item 29 · 822 Mtr₹3.62 L
Construction and erection of 11 /0.4 KV, 63 KVA Double Pole mounted Substation Flat with Polymer insulator ,L…Item 57 · 1 No₹3.26 L
Labour charges for laying , fitting , Jointing & testing of 160 mm Ø HDPE pipe PE-80,PN4 etc.as direction of…Item 27 · 942 Mtr₹3.03 L

Tender details

Tender reference: OLIC-SNP-01/2026-27
Tender ID: 2026_OLIC_144836_7
District: Sonepur
Location: Sonepur
Tender type: Open Tender
Tender category: Works
Period of work: 120 days

Show all 9 fields

Product category: Civil Works - Lift Irrigation Schemes
Pincode: 767017

Authority

State
Government of Odisha
Department
Orissa Lift Irrigation Corporation
Organisation
LI Western Circle Bhawanipatna
Office
LI Division Subarnapur
Inviting authority
E.E. L.I.Division, Subarnapur.

All Orissa Lift Irrigation Corporation tenders in Sonepur →

Costs

Estimated value: ₹34,30,085; ₹34.30 lakh
EMD / bid security: ₹34,301; Exemption available for eligible bidders
Tender fee: ₹7,080; Cost of bid document

Bid validity: 90 days

Security & deductions from the DTCN (4)

Bid cost and EMD must be deposited through the payment gateway of the designated Bank.
Additional Performance Security (APS) is required if the bid amount is less than the estimated cost, with varying percentages based on the difference.
The successful tenderer must deposit 2% of the accepted tendered amount as Initial Security Deposit (ISD) within 10 days of the letter of intent.
The security deposit will be released only after completion of the guarantee period (18 months) to the full satisfaction of the Executive Engineer.

Source: Original DTCN

Frequently asked questions

About this tender

Eligibility & bid requirements

DTCN analysed40 requirements extracted13 documents identifiedExtracted from the official tender document

Eligibility

5 items

The contractor must have a valid Civil license of requisite class ("B" & "C" as per tender) registered with State RWSS/PHED/Irrigation/Minor Irrigations/RW/PWD.
The contractor must have a valid H.T. license issued by ELBO with Employees validity.
The validity of both Civil and H.T. licenses must be for a period of at least 1 month from the date of opening of the tender.

Show 2 more

In case of joint venture, the Civil Contractor must be the 1st party with more than 51% share and be the prime contractor.
The contractor must have a valid GST Registration certificate and PAN issued by I.T. Department.

Source: Original DTCNView source document

Experience

1 item

The bidder must have experience in successful completion of similar type of works (both Civil & Elect.), with certificates issued by an officer not below the rank of Executive Engineer.

Source: Original DTCNView source document

Financial

4 items

Bid cost and EMD must be deposited through the payment gateway of the designated Bank.
Additional Performance Security (APS) is required if the bid amount is less than the estimated cost, with varying percentages based on the difference.
The successful tenderer must deposit 2% of the accepted tendered amount as Initial Security Deposit (ISD) within 10 days of the letter of intent.

Show 1 more

The security deposit will be released only after completion of the guarantee period (18 months) to the full satisfaction of the Executive Engineer.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

17 items

All construction works (Pump Chamber, Fixed foundation, Distribution Tank, ARV Tank, pipe laying) must be executed as per enclosed specifications and Engineer-in-Charge's direction.
Materials supplied must conform to relevant latest editions of BIS/REC specifications and codes of practices.
The contractor must submit purchase bills of all materials with the bill of works.

Show 14 more

HDPE pipes must conform to IS-4984/2016 (PE 80-PN4/PE 100-PN6) with ISI Mark, and both pre-delivery and post-delivery test reports by CIPET, Odisha, are required.
G.I. pipes must conform to IS-1239 (Pt 1/2004) with ISI certification mark.
Pumps must be 3 Phase Mono Block squirrel cage induction and centrifugal type (with bronze impeller), BEE 3-Star rated, and conform to IS-9079/2002.
Starters must be Auto-Star delta type suitable for 10-15 HP squirrel cage induction motors, with overload and single phasing preventer, Volt Meter, Amper Meter & MCB.
Cables must be PVC insulated (heavy duty) armored aluminum, conforming to IS-7098(Pt -II) for 1100 Volts at 50Hz.
PVC Copper Wire must be multi-strand 4 mm2 size, conforming to IS 694 for 1100 Volt operation.
Main Switch must conform to IS-4064/Part I & II with ISI Mark (Triple pole & neutral, 440 Volt, 63 AMP or 100 AMP re-wireable fuse).
G.I. Fittings must conform to respective IS standards.
C.I. Foot Valve/NR Valve/Sluice Valve must conform to IS4038/1979, IS-5312(part-I-2004 & IS-14846-2000 respectively with ISI mark.
C.I. Air Release Valve must conform to IS 14845 with ISI mark.
HDPE fittings must conform to IS 4984/2016 with ISI Mark.
Electrical construction works must be executed as per REC standard and specification as per TPWODL sanctioned estimate.
The contractor must arrange for testing of the transformer by an approved authority before commissioning and submit the test report.
The contractor must arrange for inspection by the Electrical Inspector/Deputy Electrical Inspector/competent authority of TPWODL and obtain approval for charging the Sub-Station.

Source: Original DTCNView source document

Contract conditions

13 items

The offer must remain open for acceptance for a period of 365 days from the date fixed for opening the tender.
18% GST (CGST 9% & SGST 9%) on the paper cost must be deposited.
The successful lowest bidder must submit the originals of all scanned documents within 5 days from the date of bid opening for verification.

Show 10 more

If more than one bidder is L1 quoting less than or equal to the estimated cost, the tender will be decided through a transparent lottery system.
The successful tenderer must execute agreements within 10 days from the date of issue of the letter of intent.
The contractor must quote the Percentage Rate excess or less up to two digits only after the decimal point.
The completion period for the entire work is 120 days from the date of issue of the Work Order, with specific phased completion targets.
The contractor must furnish a guarantee for 24 months from the date of handing over the project, covering defects in materials and workmanship.
Payment to the contractor will be made on a "First & Final bill" basis after successful trial and handing over of the project.
Compensation for delay will be 0.5% of the estimated cost per day, not exceeding 10% of the estimated cost.
The contractor is responsible for all taxes including GST, Income Tax, Royalty, fair weather charges, and Labour cess.
The contractor shall not sublet the work without the written approval of the Executive Engineer.
Unilateral stoppage of work by the contractor without prior written permission will be considered a breach of contract.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Costs

Estimated value

₹34,30,085

₹34.30 lakh

EMD / bid security

₹34,301

Exemption available for eligible bidders

Tender fee

₹7,080

Cost of bid document

Bid validity: 90 days

Security & deductions from the DTCN (4)

Bid cost and EMD must be deposited through the payment gateway of the designated Bank.
Additional Performance Security (APS) is required if the bid amount is less than the estimated cost, with varying percentages based on the difference.
The successful tenderer must deposit 2% of the accepted tendered amount as Initial Security Deposit (ISD) within 10 days of the letter of intent.
The security deposit will be released only after completion of the guarantee period (18 months) to the full satisfaction of the Executive Engineer.

Source: Original DTCN

Frequently asked questions

Installation and energisation of PATHARAKHANDI-X L.I.P. under BINIKA Block (BKVY RIDF-2026-27)

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

Installation and energisation of PATHARAKHANDI-X L.I.P. under BINIKA Block (BKVY RIDF-2026-27)

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more