What is the last date to bid for this tender?

Bids must be submitted on the Odisha eProcurement portal (tendersodisha.gov.in) by 17 Nov 2026, 05:00 PM. Bids are scheduled to open on 18 Nov 2026, 11:00 AM.

What is the estimated value of this tender?

The estimated tender value is ₹34.23 L (₹34,23,021).

How much EMD is required?

The EMD (bid security) is ₹34.2K (₹34,230). The portal lists EMD exemption as available for eligible bidders — check the DTCN for who qualifies.

Who can bid for this tender?

The DTCN states: Contractor must have a valid Civil license of 'B' & 'C' class registered with State RWSS/PHED/Irrigation/Minor Irrigations/RW/PWD, valid for at least 1 month from the tender opening date; Contractor must have a valid H.T. license issued by ELBO, valid for at least 1 month from the tender opening date.

What work experience is required?

As extracted from the DTCN: Bidder must have experience in successful completion of similar type of works (both Civil & Electrical), with certificates issued by an officer not below the rank of Executive Engineer.

What is the completion period?

The period of work is 120 days, and bids must remain valid for 90 days.

Which department issued this tender?

This tender was issued by Orissa Lift Irrigation Corporation, LI Western Circle Bhawanipatna, LI Division Subarnapur; the tender inviting authority is the E.E. L.I.Division, Subarnapur..

What documents are required to submit a bid?

The DTCN lists 19 documents, including Online payment transaction receipts for bid cost and EMD, Valid Registration Certificate, GSTIN Certificate, PAN Card, No Relation Certificate, Section-I of the DTCN downloaded and filled up, and 13 more.

OtherLive

Installation and energisation of PAPI-I L.I.P. under BINIKA Block (BKVY RIDF-2026-27)

Sonepur Orissa Lift Irrigation CorporationLI Division Subarnapur

Tender ID 2026_OLIC_144836_11Ref OLIC-SNP-01/2026-27

Estimated value: ₹34.23 L
EMD: ₹34.2K; Exemption available
Tender fee: ₹7.1K
Work period: 120 days

Closing in

14 days left

17 Nov 2026, 05:00 PM

About this tender

Orissa Lift Irrigation Corporation has invited bids for “Installation and energisation of PAPI-I L.I.P. under BINIKA Block (BKVY RIDF-2026-27)” in Sonepur district, Odisha. The estimated tender value is ₹34.23 lakh and the completion period is 120 days. Bids must be submitted by 17 Nov 2026, 05:00 PM.

Bid readiness

Based on the tender, not your profile

Done: Tender is currently open
Done: BOQ available · 59 items
Done: DTCN analysed · 44 requirements extracted
Done: 19 required documents identified
Needs review: Experience requirement needs review
Needs review: Financial requirements need review

Review requirements

Important dates

All times IST, as published on the portal

Published02 Nov 2026, 11:00 AM
Document downloadUntil 17 Nov 2026
Submission deadline· 14 days left17 Nov 2026, 05:00 PM
Bid opening18 Nov 2026, 11:00 AM

Tender intelligence

Eligibility & bid requirements

DTCN analysed44 requirements extracted19 documents identifiedExtracted from the official tender document

This tender from the Government of Odisha, Department of Water Resources, is for the installation and energization of new River Lift Irrigation Projects in Binika & Dunguripali Blocks of Subarnapur District. The work involves both civil and electrical components, including supply of materials, erection of HT/LT lines, commissioning of substations, and construction of various civil structures. Contractors must hold valid Civil and HT electrical licenses and have experience in similar works. The project has a completion period of 120 days.

Eligibility

4 items

Contractor must have a valid Civil license of 'B' & 'C' class registered with State RWSS/PHED/Irrigation/Minor Irrigations/RW/PWD, valid for at least 1 month from the tender opening date.
Contractor must have a valid H.T. license issued by ELBO, valid for at least 1 month from the tender opening date.
Contractor must have a valid GST Registration certificate and PAN issued by I.T. Department.

Show 1 more

In case of Joint Venture, the Civil Contractor must be the 1st party with more than 51% share and act as the prime contractor.

Source: Original DTCNView source document

Experience

1 item

Bidder must have experience in successful completion of similar type of works (both Civil & Electrical), with certificates issued by an officer not below the rank of Executive Engineer.

Source: Original DTCNView source document

Financial

7 items

Bid cost and EMD must be deposited through the payment gateway of the designated Bank.
Additional Performance Security will be obtained if the bid amount is less than the estimated cost, with varying percentages based on the difference.
The Additional Performance Security must be furnished within 7 days of the letter of intent, otherwise the bid will be cancelled and security deposit forfeited.

Show 4 more

If the bidder withdraws or modifies the bid before the validity period, the EMD/ISD will be forfeited.
Initial Security Deposit (ISD) of 2% of the accepted tendered amount must be deposited within 10 days from the date of issue of the letter of intent.
Security deposit will be refunded only after completion of the guarantee period (18 months) to the satisfaction of the Executive Engineer.
GST, Income Tax, and 1% Labour Cess will be deducted from the bill.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

18 items

All construction works (Pump Chamber, Fixed foundation, Distribution Tank, ARV Tank, pipe laying) to be executed as per enclosed specifications and Engineer-in-Charge's direction.
Materials supplied must conform to relevant latest editions of BIS/REC specifications and codes of practices.
Contractor must arrange for inspection by the Electrical Inspector and obtain formal approval for energization of the sub-station.

Show 15 more

HDPE pipes (160mm/200mm/250mm/315mm dia, PE 80-PN4/PE 100-PN6) must conform to IS-4984/2016 and bear ISI Mark.
Both pre-delivery and post-delivery test reports by CIPET, Odisha, are required for HDPE pipes.
G.I. pipes must conform to IS-1239 (Pt 1/2004) and bear ISI certification mark.
Pump sets must be 3 Phase Mono Block squirrel cage induction and centrifugal type (with bronze impeller), having BEE specification, energy efficient (3-Star rated) and conform to IS-9079/2002.
Starters must be Auto-Star delta type suitable for 10 HP to 15 HP squirrel cage induction motors, with overload and single phasing preventer, Volt Meter, Amper Meter & MCB.
PVC insulated (heavy duty) armored aluminum cables must conform to IS-7098(Pt -II) for 1100 Volts at 50Hz.
PVC copper wire for connecting pump to starter and starter to main switch must conform to IS 694, be multi-strand 4 mm2 size, for 1100 Volt operation.
Main switch must conform to IS-4064/Part I & II with ISI Mark, Triple pole & neutral, 440 Volt, 63 AMP or 100 AMP re-wireable fuse.
C.I. Foot Valve must be swing type with single disc conforming to IS4038/1979.
C.I. NR Valve must have bypass arrangement and Sluice Valve must conform to IS-5312(part-I-2004 & IS-14846-2000 Standard with ISI mark.
C.I. Air Release Valve must conform to IS 14845 with ISI mark.
HDPE fittings (Tee, bend, saddle, reducing sockets, FTA, tail piece, flange) must conform to IS 4984/2016 with ISI Mark.
Electrical construction works must be executed as per REC standard and specification as per TPWODL sanctioned estimate.
Transformer to be installed must be tested by approved authority before commissioning, and a successful test report must be enclosed with the bill of works.
Contractor must liaison with TPWODL for agreement of Pani Panchayat, shut down, connection, charging of S/S, and handing over to TPWODL.

Source: Original DTCNView source document

Contract conditions

14 items

The offer must remain open for acceptance for a period of 365 days from the date fixed for opening the tender.
18% GST (CGST 9% & SGST 9%) on the paper cost must be deposited.
If more than one bidder is L1 quoting less than or equal to estimated cost, the tender will be decided through a transparent lottery system.

Show 11 more

The contractor must quote the Percentage Rate excess or less up to two digits only after the decimal point.
Successful lowest bidder must submit original scanned documents within 5 days from the date of bid opening for verification.
Failure to produce original documents will result in debarment for three years and blacklisting.
The successful tenderer must execute agreements within 10 days from the date of issue of the letter of intent.
The completion period for the entire work is 120 days from the date of issue of the Work Order.
The contractor must furnish a guarantee against defects in materials and workmanship for 24 months from the date of handing over the project.
Payment to the contractor will be made on a "First & Final bill" basis after successful trial and handing over of the project.
Compensation for delay will be 0.5% of the estimated cost per day, not exceeding 10% of the estimated cost.
The contractor shall not sublet the work without the written approval of the Executive Engineer.
The contractor must pay all royalty, entry tax, and Municipality tax on materials.
The inspection fees for Electrical Inspector approval will be borne by the Contractor and reimbursed by OLIC upon documentary evidence.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Bill of quantities

59 priced items · ₹33.66 L (₹33,66,486)

Download BOQ file

Major components

Share of BOQ amount, grouped by item description

Plumbing & water supply38%₹12.91 L
Plaster, paint & finishing30%₹10.17 L
Electrical12%₹4.20 L
Earthwork & excavation5%₹1.61 L
Masonry5%₹1.60 L
Concrete & RCC4%₹1.50 L

Largest items

By amount

Construction of 3 phase 11 KV HT line as per REC standard confirming to IE Rules 1956 with 400 kg 10 M long P…Item 58 · 1.8 KM₹10.05 L
Cost of 200 mm ØHDPE PE 80-PN-4, Supplying of ISI marked High Density Polythelene (HDPE) Pipes for water supp…Item 28 · 600 Mtr₹5.03 L
Construction and erection of 11 /0.4 KV, 63 KVA Double Pole mounted Substation Flat with Polymer insulator ,L…Item 57 · 1 No₹3.26 L
Cost of 160 mm Ø HDPE Pipe PE -80 PN-4,Supplying of ISI marked High Density Polythelene (HDPE) Pipes for wate…Item 26 · 528 Mtr₹2.87 L
Labour charges for laying , fitting , Jointing & testing of 200 mm Ø dia HDPE pipe PE-80,PN4 etc.as direction…Item 29 · 600 Mtr₹2.64 L

Tender details

Tender reference: OLIC-SNP-01/2026-27
Tender ID: 2026_OLIC_144836_11
District: Sonepur
Location: Sonepur
Tender type: Open Tender
Tender category: Works
Period of work: 120 days

Show all 9 fields

Product category: Civil Works - Lift Irrigation Schemes
Pincode: 767017

Authority

State
Government of Odisha
Department
Orissa Lift Irrigation Corporation
Organisation
LI Western Circle Bhawanipatna
Office
LI Division Subarnapur
Inviting authority
E.E. L.I.Division, Subarnapur.

All Orissa Lift Irrigation Corporation tenders in Sonepur →

Costs

Estimated value: ₹34,23,021; ₹34.23 lakh
EMD / bid security: ₹34,230; Exemption available for eligible bidders
Tender fee: ₹7,080; Cost of bid document

Bid validity: 90 days

Security & deductions from the DTCN (7)

Bid cost and EMD must be deposited through the payment gateway of the designated Bank.
Additional Performance Security will be obtained if the bid amount is less than the estimated cost, with varying percentages based on the difference.
The Additional Performance Security must be furnished within 7 days of the letter of intent, otherwise the bid will be cancelled and security deposit forfeited.
If the bidder withdraws or modifies the bid before the validity period, the EMD/ISD will be forfeited.
Initial Security Deposit (ISD) of 2% of the accepted tendered amount must be deposited within 10 days from the date of issue of the letter of intent.
Security deposit will be refunded only after completion of the guarantee period (18 months) to the satisfaction of the Executive Engineer.
GST, Income Tax, and 1% Labour Cess will be deducted from the bill.

Source: Original DTCN

Frequently asked questions

About this tender

Eligibility & bid requirements

DTCN analysed44 requirements extracted19 documents identifiedExtracted from the official tender document

Eligibility

4 items

Contractor must have a valid Civil license of 'B' & 'C' class registered with State RWSS/PHED/Irrigation/Minor Irrigations/RW/PWD, valid for at least 1 month from the tender opening date.
Contractor must have a valid H.T. license issued by ELBO, valid for at least 1 month from the tender opening date.
Contractor must have a valid GST Registration certificate and PAN issued by I.T. Department.

Show 1 more

In case of Joint Venture, the Civil Contractor must be the 1st party with more than 51% share and act as the prime contractor.

Source: Original DTCNView source document

Experience

1 item

Bidder must have experience in successful completion of similar type of works (both Civil & Electrical), with certificates issued by an officer not below the rank of Executive Engineer.

Source: Original DTCNView source document

Financial

7 items

Bid cost and EMD must be deposited through the payment gateway of the designated Bank.
Additional Performance Security will be obtained if the bid amount is less than the estimated cost, with varying percentages based on the difference.
The Additional Performance Security must be furnished within 7 days of the letter of intent, otherwise the bid will be cancelled and security deposit forfeited.

Show 4 more

If the bidder withdraws or modifies the bid before the validity period, the EMD/ISD will be forfeited.
Initial Security Deposit (ISD) of 2% of the accepted tendered amount must be deposited within 10 days from the date of issue of the letter of intent.
Security deposit will be refunded only after completion of the guarantee period (18 months) to the satisfaction of the Executive Engineer.
GST, Income Tax, and 1% Labour Cess will be deducted from the bill.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

18 items

All construction works (Pump Chamber, Fixed foundation, Distribution Tank, ARV Tank, pipe laying) to be executed as per enclosed specifications and Engineer-in-Charge's direction.
Materials supplied must conform to relevant latest editions of BIS/REC specifications and codes of practices.
Contractor must arrange for inspection by the Electrical Inspector and obtain formal approval for energization of the sub-station.

Show 15 more

HDPE pipes (160mm/200mm/250mm/315mm dia, PE 80-PN4/PE 100-PN6) must conform to IS-4984/2016 and bear ISI Mark.
Both pre-delivery and post-delivery test reports by CIPET, Odisha, are required for HDPE pipes.
G.I. pipes must conform to IS-1239 (Pt 1/2004) and bear ISI certification mark.
Pump sets must be 3 Phase Mono Block squirrel cage induction and centrifugal type (with bronze impeller), having BEE specification, energy efficient (3-Star rated) and conform to IS-9079/2002.
Starters must be Auto-Star delta type suitable for 10 HP to 15 HP squirrel cage induction motors, with overload and single phasing preventer, Volt Meter, Amper Meter & MCB.
PVC insulated (heavy duty) armored aluminum cables must conform to IS-7098(Pt -II) for 1100 Volts at 50Hz.
PVC copper wire for connecting pump to starter and starter to main switch must conform to IS 694, be multi-strand 4 mm2 size, for 1100 Volt operation.
Main switch must conform to IS-4064/Part I & II with ISI Mark, Triple pole & neutral, 440 Volt, 63 AMP or 100 AMP re-wireable fuse.
C.I. Foot Valve must be swing type with single disc conforming to IS4038/1979.
C.I. NR Valve must have bypass arrangement and Sluice Valve must conform to IS-5312(part-I-2004 & IS-14846-2000 Standard with ISI mark.
C.I. Air Release Valve must conform to IS 14845 with ISI mark.
HDPE fittings (Tee, bend, saddle, reducing sockets, FTA, tail piece, flange) must conform to IS 4984/2016 with ISI Mark.
Electrical construction works must be executed as per REC standard and specification as per TPWODL sanctioned estimate.
Transformer to be installed must be tested by approved authority before commissioning, and a successful test report must be enclosed with the bill of works.
Contractor must liaison with TPWODL for agreement of Pani Panchayat, shut down, connection, charging of S/S, and handing over to TPWODL.

Source: Original DTCNView source document

Contract conditions

14 items

The offer must remain open for acceptance for a period of 365 days from the date fixed for opening the tender.
18% GST (CGST 9% & SGST 9%) on the paper cost must be deposited.
If more than one bidder is L1 quoting less than or equal to estimated cost, the tender will be decided through a transparent lottery system.

Show 11 more

The contractor must quote the Percentage Rate excess or less up to two digits only after the decimal point.
Successful lowest bidder must submit original scanned documents within 5 days from the date of bid opening for verification.
Failure to produce original documents will result in debarment for three years and blacklisting.
The successful tenderer must execute agreements within 10 days from the date of issue of the letter of intent.
The completion period for the entire work is 120 days from the date of issue of the Work Order.
The contractor must furnish a guarantee against defects in materials and workmanship for 24 months from the date of handing over the project.
Payment to the contractor will be made on a "First & Final bill" basis after successful trial and handing over of the project.
Compensation for delay will be 0.5% of the estimated cost per day, not exceeding 10% of the estimated cost.
The contractor shall not sublet the work without the written approval of the Executive Engineer.
The contractor must pay all royalty, entry tax, and Municipality tax on materials.
The inspection fees for Electrical Inspector approval will be borne by the Contractor and reimbursed by OLIC upon documentary evidence.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Costs

Estimated value

₹34,23,021

₹34.23 lakh

EMD / bid security

₹34,230

Exemption available for eligible bidders

Tender fee

₹7,080

Cost of bid document

Bid validity: 90 days

Security & deductions from the DTCN (7)

Bid cost and EMD must be deposited through the payment gateway of the designated Bank.
Additional Performance Security will be obtained if the bid amount is less than the estimated cost, with varying percentages based on the difference.
The Additional Performance Security must be furnished within 7 days of the letter of intent, otherwise the bid will be cancelled and security deposit forfeited.
If the bidder withdraws or modifies the bid before the validity period, the EMD/ISD will be forfeited.
Initial Security Deposit (ISD) of 2% of the accepted tendered amount must be deposited within 10 days from the date of issue of the letter of intent.
Security deposit will be refunded only after completion of the guarantee period (18 months) to the satisfaction of the Executive Engineer.
GST, Income Tax, and 1% Labour Cess will be deducted from the bill.

Source: Original DTCN

Frequently asked questions

Installation and energisation of PAPI-I L.I.P. under BINIKA Block (BKVY RIDF-2026-27)

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

Installation and energisation of PAPI-I L.I.P. under BINIKA Block (BKVY RIDF-2026-27)

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more