What is the last date to bid for this tender?

Bids must be submitted on the Odisha eProcurement portal (tendersodisha.gov.in) by 02 Nov 2026, 05:00 PM. Bids are scheduled to open on 03 Nov 2026, 11:00 AM.

What is the estimated value of this tender?

The estimated tender value is ₹1.94 Cr (₹1,94,36,811).

How much EMD is required?

The EMD (bid security) is ₹1.94 L (₹1,94,368). The portal lists EMD exemption as available for eligible bidders — check the DTCN for who qualifies.

Who can bid for this tender?

The DTCN states: Tenderer must not have abandoned any work of similar nature or had their contract rescinded during the last five years; Tenderer must not be related to any officer in the rank of Assistant Engineer & above in the state R.D. Department or Assistant/Under Secretary & above in the R.D. Department.

What work experience is required?

As extracted from the DTCN: Tenderers for works value more than Rs. 5.00 crores must have executed works (Buildings/Bridges/Major Irrigation Structures) worth 50% of the estimated cost put to tender during any 3 financial years of the last preceding 8 years; In a Joint Venture, the execution of similar nature of works will be applied for the work executed by each partner taken together, being a minimum of 50% of the estimated cost put to tender during any three financial years of the last preceding eight years.

What is the completion period?

The period of work is 365 days, and bids must remain valid for 90 days.

Which department issued this tender?

This tender was issued by CE RW I, RW-CIRCLE-SUNDARGARH; the tender inviting authority is the Circle Officer.

What documents are required to submit a bid?

The DTCN lists 19 documents, including GSTIN, PAN Card, Registration Certificate, Affidavit regarding correctness of information/certificate, EPF registration (before agreement drawl), Work in hand (Format-II), and 13 more.

BuildingLive

Construction of Office building of Assistant Labour Officer at Koida Block

Bonai, Sundargarh CE RW IRW-CIRCLE-SUNDARGARH

Tender ID 2026_CERWI_143825_1Ref RWCCESNG-32 of 2026-27

Estimated value: ₹1.94 Cr
EMD: ₹1.94 L; Exemption available
Tender fee: ₹10.0K
Work period: 365 days

Closing soon

8h left

02 Nov 2026, 05:00 PM

About this tender

CE RW I has invited bids for “Construction of Office building of Assistant Labour Officer at Koida Block” in Bonai, Sundargarh district, Odisha. The estimated tender value is ₹1.94 crore and the completion period is 365 days. Bids must be submitted by 02 Nov 2026, 05:00 PM.

Bid readiness

Based on the tender, not your profile

Needs review: Tender is open — only 8h left
Done: BOQ available · 290 items
Done: DTCN analysed · 72 requirements extracted
Done: 19 required documents identified
Needs review: Experience requirement needs review
Needs review: Financial requirements need review

Review requirements

Important dates

All times IST, as published on the portal

Published16 Oct 2026, 03:00 PM
Document downloadUntil 02 Nov 2026
Submission deadline· 8h left02 Nov 2026, 05:00 PM
Bid opening03 Nov 2026, 11:00 AM

Tender intelligence

Eligibility & bid requirements

DTCN analysed72 requirements extracted19 documents identifiedExtracted from the official tender document

This tender from the Rural Development Department, Rural Works Organisation, Odisha, invites bids for Composite Building Works (Civil, E.I., and P.H.) in Sundargarh. Bidders must submit online through the e-procurement portal, and payment for tender paper cost and EMD is electronic. A key requirement is that Joint Ventures are only allowed for works exceeding Rs 10.00 crore, and contractors must meet specific experience and financial turnover criteria based on the work's estimated value.

Eligibility

8 items

Tenderer must not have abandoned any work of similar nature or had their contract rescinded during the last five years.
Tenderer must not be related to any officer in the rank of Assistant Engineer & above in the state R.D. Department or Assistant/Under Secretary & above in the R.D. Department.
Tenderer must upload a valid Registration Certificate of the required class as on date.

Show 5 more

Tenderers for works value up to Rs. 5.00 crores have no qualifying criteria beyond general clauses (a), (b), (c), (d), & (e).
Joint Ventures are allowed only for works value exceeding Rs 10.00 crore, with not more than three constituents.
The lead partner of a Joint Venture must be a registered Contractor of appropriate class of the State.
Bidders from outside the state can participate without a GSTIN clearance Certificate if they submit an affidavit undertaking that they are not registered under the GSTIN Act and have no liability, but must produce the certificate before contract award.
Bidders registered under other State Governments/MES/Railways/CPWD may participate, but successful bidders must register under the state PWD before signing the Agreement.

Source: Original DTCNView source document

Experience

2 items

Tenderers for works value more than Rs. 5.00 crores must have executed works (Buildings/Bridges/Major Irrigation Structures) worth 50% of the estimated cost put to tender during any 3 financial years of the last preceding 8 years.
In a Joint Venture, the execution of similar nature of works will be applied for the work executed by each partner taken together, being a minimum of 50% of the estimated cost put to tender during any three financial years of the last preceding eight years.

Source: Original DTCNView source document

Financial

12 items

The total financial turnover in respect of Civil Engineering works must be not less than the amount put to tender during any 3 financial years of the last preceding five financial years.
Applicant's available bid capacity at the expected time of bidding must be more than the total estimated cost of the works.
In a Joint Venture, the available bid capacity will be applied for each partner to the extent of his proposed participation.

Show 9 more

Works Department Office Memorandum No. 173 Dated- 03.01.2026 and Office Memorandum No. 632 Dated- 09.01.2026 shall prevail for Additional Performance Security, Negative Price Bid Cap, and price preference for SC & ST contractors.
Only bidders who successfully remit their Cost of Tender Paper and Earnest Money Deposit will be eligible to participate.
The successful bidder quoting less than the estimated cost must furnish additional performance security (APS) within 7 days, otherwise the bid will be cancelled and security deposit forfeited, with blacklisting initiated.
Additional Performance Security (APS) is required if the accepted bid price is below the estimated cost, with varying percentages based on the difference.
The EMD of unsuccessful tenderers will be credited after the tender is awarded to the successful tenderer.
Upon acceptance of the tender, the successful tenderer must deposit an initial security amount to make 2% of the work's cost (together with EMD) within 10 days and sign the agreement.
Failure to deposit the additional initial security or sign the contract within the stipulated time will lead to forfeiture of EMD and withdrawal of tender acceptance.
Security deposit will be deducted from bills at 5% of the gross amount for B class & above contractors, and 3% for C & D class contractors.
If the tenderer backs out before acceptance, EMD will be forfeited.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

28 items

Special class contractors must employ one Graduate Engineer and two Diploma Holders belonging to the state of Odisha.
A class contractors must employ one Graduate Engineer or two Diploma Holders belonging to the State of Odisha.
The Civil Contractor must have an agreement (Notarized) with a registered Electrical Contractor, along with their valid license, GSTIN, and PAN.

Show 25 more

Cement to be used must be Ordinary Portland cement (IS:269), High strength ordinary Portland cement (IS:8112), or Portland Slag Cement (IS:445).
Reinforcement/un-tensioned steel must conform to IS:432 (Part-1) for Fe 250, IS:1139 HYSD for Fe 415, or IS:1786 HYSD for Fe 500.
Contractor must arrange cement and steel from approved manufacturers and get them tested and approved by the department before use.
All required machinery for the work, such as Concrete Mixers, Vibrators, Road Rollers, Sheep foot rollers, must be arranged by the contractor at their own cost.
All reinforced cement concrete work must conform to Odisha Detailed Standard Specification and be of M.150 and M.200 equivalent nominal proportion.
Shuttering and centering must be with seasoned sal wood planks lined with suitable setting and made leak-proof, or alternatively, steel shuttering and centering may be used.
Cement concrete in roof slab, beams, etc., must be machine mixed and vibrated.
For piling work, concrete must be controlled as per specifications and of the grade specified on drawings, with minimum cement quantity as per IS 2911 (Part-III).
Reinforcement for piling work must be as per specifications and of the grade specified on drawings.
Bentonite used must meet specified properties and be mixed thoroughly with clean fresh water, with control tests carried out on the suspension.
Piling system must cover bored cast-in-situ under reamed piles, with termination levels as shown on drawings or decided by the engineer-in-charge.
The diameter of the under reamed bulb shall be 2.5 times the diameter of the pile stem.
The contractor must guarantee the safe bearing capacity of all piles.
Boreholes shall be made by any standard method, with equipment and method description submitted for approval.
Concrete for piles must be placed through a funnel to fill the entire volume of the borehole without void formation, and mechanical vibrators shall not be used.
Under water concreting shall be carried out by displacement method using a termite pipe of not less than 15 cm diameter.
The minimum pile stem diameter for under water concreting shall be 25 cm.
The top of the piles shall be brought up above the specified cut-off level by at least 30cm.
Errors in setting out piles shall not exceed 12mm, measured horizontally from the center.
The contractor must submit a description of the procedure for carrying out load tests.
Initial test piles and their testing will not be paid for separately; the cost must be included in the contractor's rate.
Routine load tests shall be conducted on 2% of the total number of piles.
The contractor shall provide all necessary equipment for applying specified vertical load and measuring settlement for load tests.
The maximum test load shall be twice the anticipated working load on the pile.
The contractor must submit a report of the load test including soil conditions, pile description, boring record, load and settlement readings, and time-load settlement curves.

Source: Original DTCNView source document

Contract conditions

22 items

Tenders will remain valid for a period of ninety days from the date of receipt.
The work must be completed within the stipulated period mentioned in the NIT, commencing from the date of issue of the work order.
Contractors must submit a detailed program of work along with the tender.

Show 19 more

If the contractor fails to maintain required progress or complete the work on time, compensation at 1.5% per month of the tendered value will be levied, not exceeding 10% of the tendered value.
Bonus for early completion is offered on a graduated scale of 1% to 5% of the contract value for building works/PH works with a minimum value of Rs. 40.00 lakhs.
In case of rescission of contract, 20% of the value of left-over work will be realized from the contractor as penalty.
The defect liability period is 3 years from the date of the final certificate of completion.
The contractor is responsible for payment of all royalties, local taxes (including state GST & Income Tax), ferry, tollage charges, Octroi Taxes, Cess, DMF (10% over Royalty), and EMF (5% over Royalty).
No extra payment will be made for removing surplus materials and debris, dismantling preliminary work, and cleaning/dressing the ground after work completion.
The contractor is fully liable to indemnify the department for any compensation under the 'Workmen' compensation Act VII to 1923.
No claim will be entertained for extra items of work or extra quantity without a written order from a responsible P.W.D./R.W.D. officer and settled rates.
The contractor must arrange for water supply and sanitary arrangements for labor camps at their own cost.
The contractor must arrange adequate lighting for night work whenever necessary at their own cost.
Taking out water from the foundation (rainwater or subsoil water) is the contractor's responsibility, with no extra payment.
No part of the contract shall be sub-let without written permission of the Superintending Engineer/Executive Engineer.
In the event of delay due to the Department in material supply or structural designs, reasonable extension of time will be granted, but no claim for monetary compensation will be entertained.
The contractor must furnish a 'no claim' undertaking along with the application for extension of time.
The contractor must pay royalties for all materials as per State Govt. rates and produce receipts; otherwise, costs will be recovered from bills.
Testing charges for materials, including collection and transportation of samples, will be borne by the contractor.
The contractor will not claim anything if the work is curtailed or stopped due to lack of funds or other reasons.
Price adjustment for increase or decrease in rates of labor, materials, fuels, and lubricants will apply for work done up to the initial intended completion date or granted extensions.
The price adjustment formula includes components for other materials, cement, steel, bitumen, pipes, labor, POL (fuel and lubricant), and plant and machinery spares.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Bill of quantities

290 priced items · ₹1.94 Cr (₹1,94,16,651)

Download BOQ file

Largest items

By amount

Ground FloorItem 80 · 177.42 qtl₹16.67 L
10 PASSENGER LIFT WITH WIRRING(1.1) Supply installation testing & commissioning of 10 passenger liftItem 364 · 1 nos₹15.53 L
First FloorItem 81 · 79.5 qtl₹7.50 L
Compound wallItem 31 · 101.94 cum₹6.99 L
Compound wallItem 83 · 69.43 qtl₹6.52 L

Tender details

Tender reference: RWCCESNG-32 of 2026-27
Tender ID: 2026_CERWI_143825_1
District: Sundargarh
Location: Bonai
Tender type: National Competitive Bid
Tender category: Works
Period of work: 365 days

Show all 9 fields

Product category: Civil Works - Buildings
Pincode: 770038

Authority

State
Government of Odisha
Department
CE RW I
Organisation
RW-CIRCLE-SUNDARGARH
Inviting authority
Circle Officer

All CE RW I tenders in Sundargarh →

Costs

Estimated value: ₹1,94,36,811; ₹1.94 crore
EMD / bid security: ₹1,94,368; Exemption available for eligible bidders
Tender fee: ₹10,000; Cost of bid document

Bid validity: 90 days

Security & deductions from the DTCN (8)

Works Department Office Memorandum No. 173 Dated- 03.01.2026 and Office Memorandum No. 632 Dated- 09.01.2026 shall prevail for Additional Performance Security, Negative Price Bid Cap, and price preference for SC & ST contractors.
The successful bidder quoting less than the estimated cost must furnish additional performance security (APS) within 7 days, otherwise the bid will be cancelled and security deposit forfeited, with blacklisting initiated.
Additional Performance Security (APS) is required if the accepted bid price is below the estimated cost, with varying percentages based on the difference.
The EMD of unsuccessful tenderers will be credited after the tender is awarded to the successful tenderer.
Upon acceptance of the tender, the successful tenderer must deposit an initial security amount to make 2% of the work's cost (together with EMD) within 10 days and sign the agreement.
Failure to deposit the additional initial security or sign the contract within the stipulated time will lead to forfeiture of EMD and withdrawal of tender acceptance.
Security deposit will be deducted from bills at 5% of the gross amount for B class & above contractors, and 3% for C & D class contractors.
If the tenderer backs out before acceptance, EMD will be forfeited.

Source: Original DTCN

Frequently asked questions

Eligibility & bid requirements

DTCN analysed72 requirements extracted19 documents identifiedExtracted from the official tender document

Eligibility

8 items

Tenderer must not have abandoned any work of similar nature or had their contract rescinded during the last five years.
Tenderer must not be related to any officer in the rank of Assistant Engineer & above in the state R.D. Department or Assistant/Under Secretary & above in the R.D. Department.
Tenderer must upload a valid Registration Certificate of the required class as on date.

Show 5 more

Tenderers for works value up to Rs. 5.00 crores have no qualifying criteria beyond general clauses (a), (b), (c), (d), & (e).
Joint Ventures are allowed only for works value exceeding Rs 10.00 crore, with not more than three constituents.
The lead partner of a Joint Venture must be a registered Contractor of appropriate class of the State.
Bidders from outside the state can participate without a GSTIN clearance Certificate if they submit an affidavit undertaking that they are not registered under the GSTIN Act and have no liability, but must produce the certificate before contract award.
Bidders registered under other State Governments/MES/Railways/CPWD may participate, but successful bidders must register under the state PWD before signing the Agreement.

Source: Original DTCNView source document

Experience

2 items

Tenderers for works value more than Rs. 5.00 crores must have executed works (Buildings/Bridges/Major Irrigation Structures) worth 50% of the estimated cost put to tender during any 3 financial years of the last preceding 8 years.
In a Joint Venture, the execution of similar nature of works will be applied for the work executed by each partner taken together, being a minimum of 50% of the estimated cost put to tender during any three financial years of the last preceding eight years.

Source: Original DTCNView source document

Financial

12 items

The total financial turnover in respect of Civil Engineering works must be not less than the amount put to tender during any 3 financial years of the last preceding five financial years.
Applicant's available bid capacity at the expected time of bidding must be more than the total estimated cost of the works.
In a Joint Venture, the available bid capacity will be applied for each partner to the extent of his proposed participation.

Show 9 more

Works Department Office Memorandum No. 173 Dated- 03.01.2026 and Office Memorandum No. 632 Dated- 09.01.2026 shall prevail for Additional Performance Security, Negative Price Bid Cap, and price preference for SC & ST contractors.
Only bidders who successfully remit their Cost of Tender Paper and Earnest Money Deposit will be eligible to participate.
The successful bidder quoting less than the estimated cost must furnish additional performance security (APS) within 7 days, otherwise the bid will be cancelled and security deposit forfeited, with blacklisting initiated.
Additional Performance Security (APS) is required if the accepted bid price is below the estimated cost, with varying percentages based on the difference.
The EMD of unsuccessful tenderers will be credited after the tender is awarded to the successful tenderer.
Upon acceptance of the tender, the successful tenderer must deposit an initial security amount to make 2% of the work's cost (together with EMD) within 10 days and sign the agreement.
Failure to deposit the additional initial security or sign the contract within the stipulated time will lead to forfeiture of EMD and withdrawal of tender acceptance.
Security deposit will be deducted from bills at 5% of the gross amount for B class & above contractors, and 3% for C & D class contractors.
If the tenderer backs out before acceptance, EMD will be forfeited.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

28 items

Special class contractors must employ one Graduate Engineer and two Diploma Holders belonging to the state of Odisha.
A class contractors must employ one Graduate Engineer or two Diploma Holders belonging to the State of Odisha.
The Civil Contractor must have an agreement (Notarized) with a registered Electrical Contractor, along with their valid license, GSTIN, and PAN.

Show 25 more

Cement to be used must be Ordinary Portland cement (IS:269), High strength ordinary Portland cement (IS:8112), or Portland Slag Cement (IS:445).
Reinforcement/un-tensioned steel must conform to IS:432 (Part-1) for Fe 250, IS:1139 HYSD for Fe 415, or IS:1786 HYSD for Fe 500.
Contractor must arrange cement and steel from approved manufacturers and get them tested and approved by the department before use.
All required machinery for the work, such as Concrete Mixers, Vibrators, Road Rollers, Sheep foot rollers, must be arranged by the contractor at their own cost.
All reinforced cement concrete work must conform to Odisha Detailed Standard Specification and be of M.150 and M.200 equivalent nominal proportion.
Shuttering and centering must be with seasoned sal wood planks lined with suitable setting and made leak-proof, or alternatively, steel shuttering and centering may be used.
Cement concrete in roof slab, beams, etc., must be machine mixed and vibrated.
For piling work, concrete must be controlled as per specifications and of the grade specified on drawings, with minimum cement quantity as per IS 2911 (Part-III).
Reinforcement for piling work must be as per specifications and of the grade specified on drawings.
Bentonite used must meet specified properties and be mixed thoroughly with clean fresh water, with control tests carried out on the suspension.
Piling system must cover bored cast-in-situ under reamed piles, with termination levels as shown on drawings or decided by the engineer-in-charge.
The diameter of the under reamed bulb shall be 2.5 times the diameter of the pile stem.
The contractor must guarantee the safe bearing capacity of all piles.
Boreholes shall be made by any standard method, with equipment and method description submitted for approval.
Concrete for piles must be placed through a funnel to fill the entire volume of the borehole without void formation, and mechanical vibrators shall not be used.
Under water concreting shall be carried out by displacement method using a termite pipe of not less than 15 cm diameter.
The minimum pile stem diameter for under water concreting shall be 25 cm.
The top of the piles shall be brought up above the specified cut-off level by at least 30cm.
Errors in setting out piles shall not exceed 12mm, measured horizontally from the center.
The contractor must submit a description of the procedure for carrying out load tests.
Initial test piles and their testing will not be paid for separately; the cost must be included in the contractor's rate.
Routine load tests shall be conducted on 2% of the total number of piles.
The contractor shall provide all necessary equipment for applying specified vertical load and measuring settlement for load tests.
The maximum test load shall be twice the anticipated working load on the pile.
The contractor must submit a report of the load test including soil conditions, pile description, boring record, load and settlement readings, and time-load settlement curves.

Source: Original DTCNView source document

Contract conditions

22 items

Tenders will remain valid for a period of ninety days from the date of receipt.
The work must be completed within the stipulated period mentioned in the NIT, commencing from the date of issue of the work order.
Contractors must submit a detailed program of work along with the tender.

Show 19 more

If the contractor fails to maintain required progress or complete the work on time, compensation at 1.5% per month of the tendered value will be levied, not exceeding 10% of the tendered value.
Bonus for early completion is offered on a graduated scale of 1% to 5% of the contract value for building works/PH works with a minimum value of Rs. 40.00 lakhs.
In case of rescission of contract, 20% of the value of left-over work will be realized from the contractor as penalty.
The defect liability period is 3 years from the date of the final certificate of completion.
The contractor is responsible for payment of all royalties, local taxes (including state GST & Income Tax), ferry, tollage charges, Octroi Taxes, Cess, DMF (10% over Royalty), and EMF (5% over Royalty).
No extra payment will be made for removing surplus materials and debris, dismantling preliminary work, and cleaning/dressing the ground after work completion.
The contractor is fully liable to indemnify the department for any compensation under the 'Workmen' compensation Act VII to 1923.
No claim will be entertained for extra items of work or extra quantity without a written order from a responsible P.W.D./R.W.D. officer and settled rates.
The contractor must arrange for water supply and sanitary arrangements for labor camps at their own cost.
The contractor must arrange adequate lighting for night work whenever necessary at their own cost.
Taking out water from the foundation (rainwater or subsoil water) is the contractor's responsibility, with no extra payment.
No part of the contract shall be sub-let without written permission of the Superintending Engineer/Executive Engineer.
In the event of delay due to the Department in material supply or structural designs, reasonable extension of time will be granted, but no claim for monetary compensation will be entertained.
The contractor must furnish a 'no claim' undertaking along with the application for extension of time.
The contractor must pay royalties for all materials as per State Govt. rates and produce receipts; otherwise, costs will be recovered from bills.
Testing charges for materials, including collection and transportation of samples, will be borne by the contractor.
The contractor will not claim anything if the work is curtailed or stopped due to lack of funds or other reasons.
Price adjustment for increase or decrease in rates of labor, materials, fuels, and lubricants will apply for work done up to the initial intended completion date or granted extensions.
The price adjustment formula includes components for other materials, cement, steel, bitumen, pipes, labor, POL (fuel and lubricant), and plant and machinery spares.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Costs

Estimated value

₹1,94,36,811

₹1.94 crore

EMD / bid security

₹1,94,368

Exemption available for eligible bidders

Tender fee

₹10,000

Cost of bid document

Bid validity: 90 days

Security & deductions from the DTCN (8)

Works Department Office Memorandum No. 173 Dated- 03.01.2026 and Office Memorandum No. 632 Dated- 09.01.2026 shall prevail for Additional Performance Security, Negative Price Bid Cap, and price preference for SC & ST contractors.
The successful bidder quoting less than the estimated cost must furnish additional performance security (APS) within 7 days, otherwise the bid will be cancelled and security deposit forfeited, with blacklisting initiated.
Additional Performance Security (APS) is required if the accepted bid price is below the estimated cost, with varying percentages based on the difference.
The EMD of unsuccessful tenderers will be credited after the tender is awarded to the successful tenderer.
Upon acceptance of the tender, the successful tenderer must deposit an initial security amount to make 2% of the work's cost (together with EMD) within 10 days and sign the agreement.
Failure to deposit the additional initial security or sign the contract within the stipulated time will lead to forfeiture of EMD and withdrawal of tender acceptance.
Security deposit will be deducted from bills at 5% of the gross amount for B class & above contractors, and 3% for C & D class contractors.
If the tenderer backs out before acceptance, EMD will be forfeited.

Source: Original DTCN

Frequently asked questions

Construction of Office building of Assistant Labour Officer at Koida Block

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

Construction of Office building of Assistant Labour Officer at Koida Block

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more