What is the last date to bid for this tender?

Bids must be submitted on the Odisha eProcurement portal (tendersodisha.gov.in) by 17 Nov 2026, 05:00 PM. Bids are scheduled to open on 18 Nov 2026, 11:00 AM.

What is the estimated value of this tender?

The estimated tender value is ₹3.45 Cr (₹3,45,30,000).

How much EMD is required?

The EMD (bid security) is ₹3.45 L (₹3,45,350). The portal lists EMD exemption as available for eligible bidders — check the DTCN for who qualifies.

Who can bid for this tender?

The DTCN states: Eligible class of contractors of Government of Odisha or equivalent class of other State Government/Railways/CPWD/MES; Joint Ventures are allowed for works exceeding Rs. 10.00 crore, with a maximum of three constituents, where the lead partner is a registered contractor of appropriate class in the State.

What work experience is required?

As extracted from the DTCN: For works exceeding Rs. 5.00 crores, must have executed similar nature of work worth 75% of the estimated cost in any three financial years of the last five preceding years (2021-22 to 2025-26), excluding the current financial year.

What is the completion period?

The period of work is 365 days, and bids must remain valid for 90 days.

Which department issued this tender?

This tender was issued by CE RW I, RWCIRCLE-BALANGIR; the tender inviting authority is the Chief Construction Engineer, R.W.Circle, Bolangir.

What documents are required to submit a bid?

The DTCN lists 17 documents, including Cost of Tender Paper (online transfer), EMD (online transfer), Valid Registration Certificate, GSTIN Certificate, PAN Card, No Relationship Certificate (Schedule-A), and 11 more.

RoadLive

Construction of Bridge over Local Nallah on Sanabanki to Jamki via Majhipada Road in the district of Bolangir under SBY for the year 2026-27 (Open Foundation)

Titilagarh, Balangir CE RW IRWCIRCLE-BALANGIR

Tender ID 2026_CERWI_144517_1Ref BLGR-Online-27/2026-27

Estimated value: ₹3.45 Cr
EMD: ₹3.45 L; Exemption available
Tender fee: ₹10.0K
Work period: 365 days

Closing in

14 days left

17 Nov 2026, 05:00 PM

About this tender

CE RW I has invited bids for “Construction of Bridge over Local Nallah on Sanabanki to Jamki via Majhipada Road in the district of Bolangir under SBY for the year 2026-27 (Open Foundation)” in Titilagarh, Balangir district, Odisha. The estimated tender value is ₹3.45 crore and the completion period is 365 days. Bids must be submitted by 17 Nov 2026, 05:00 PM.

Bid readiness

Based on the tender, not your profile

Done: Tender is currently open
Done: BOQ available · 38 items
Done: DTCN analysed · 54 requirements extracted
Done: 17 required documents identified
Needs review: Experience requirement needs review
Needs review: Financial requirements need review

Review requirements

Important dates

All times IST, as published on the portal

Published29 Oct 2026, 11:30 AM
Document downloadUntil 17 Nov 2026
Submission deadline· 14 days left17 Nov 2026, 05:00 PM
Bid opening18 Nov 2026, 11:00 AM

Tender intelligence

Eligibility & bid requirements

DTCN analysed54 requirements extracted17 documents identifiedExtracted from the official tender document

The Chief Construction Engineer, Rural Works Circle, Bolangir, on behalf of the Governor of Odisha, invites online percentage rate tenders for four bridge construction works in the districts of Bolangir and Subarnapur. The estimated costs range from Rs. 294.28 lakhs to Rs. 548.99 lakhs, with a completion period of 12 calendar months. Bidders must be eligible contractors registered with the Government of Odisha or equivalent, or Joint Ventures with bridge construction experience, and possess a compatible Digital Signature Certificate.

Eligibility

8 items

Eligible class of contractors of Government of Odisha or equivalent class of other State Government/Railways/CPWD/MES.
Joint Ventures are allowed for works exceeding Rs. 10.00 crore, with a maximum of three constituents, where the lead partner is a registered contractor of appropriate class in the State.
Contractors not registered with the Government of Odisha can participate but must register with the appropriate authority before work award.

Show 5 more

Must not have abandoned any work of similar nature or had their contract rescinded in the last five years.
Must possess a valid Registration Certificate of the required class.
Must have an up-to-date GSTIN Certificate and PAN Card.
For works up to Rs. 5.00 crores, no specific qualifying criteria except clauses 14(a), (b), (c), (d), and 14(h).
If a well is beyond rectification, it must be abandoned and another sunk at the contractor's cost.

Source: Original DTCNView source document

Experience

1 item

For works exceeding Rs. 5.00 crores, must have executed similar nature of work worth 75% of the estimated cost in any three financial years of the last five preceding years (2021-22 to 2025-26), excluding the current financial year.

Source: Original DTCNView source document

Financial

8 items

Must have a total financial turnover in Civil Engineering works not less than the amount put to tender in any three financial years of the last five preceding years (2021-22 to 2025-26), excluding the current financial year.
Required Bid Capacity must be more than the estimated cost of the work, calculated as (A*N*2-B), where A is maximum work value in one year, N is completion period, and B is value of existing commitments.
EMD required is 1% of the estimated cost, to be submitted online.

Show 5 more

Withdrawal of bid or modification of terms before the validity period will result in forfeiture of EMD.
Additional Performance Security (APS) is required if the accepted bid price is below the estimated cost, ranging from 0.1% to 5% of the bid price depending on the percentage below the estimate.
APS must be furnished within seven days of Letter of Acceptance (LOA) in the form of Term Deposit Receipt or Bank Guarantee.
Failure to furnish APS will result in bid cancellation, debarment for 180 days, and blacklisting proceedings.
CESS @ 1% of the amount of each bill shall be deducted.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

21 items

Must have possession of specified machineries either owned or on hire/lease, with proof of ownership (invoice/sale deed/RC Book) or long-term lease deed (minimum completion period + 90 days).
Super Class contractors must employ two Graduate Engineers and two Diploma holders from Odisha.
Special Class contractors must employ one Graduate Engineer and two Diploma holders from Odisha.

Show 18 more

'A' Class contractors must employ one Graduate Engineer or two Diploma holders from Odisha.
Must possess compatible Digital Signature Certificates (DSC) of required Class (Class II or Class III).
Must furnish information on work in hand in complete shape as per Schedule-G.
Must have specific machineries for bridge construction (Hydraulic Excavator, Vibratory Roller/Soil Compactor, Self-loading Concrete Mixer, Generator, Crawler Crane for well foundation, Piling Rig with Bentonite Pump for pile foundation).
Work programme must be submitted at the time of agreement execution.
All reinforced cement concrete work must conform to IRC Code and Bridge Code section I, II, III, IV and VII & latest design criteria for prestressed concrete bridges.
MoSRT&H Specification for Road & Bridge work (Latest Revision) shall be the guiding book for execution, quality assurance, specification and measurement.
Steel shuttering & centring, lined with suitable sheeting and made leak proof/water tight, must be used.
Concrete must be machine mixed unless otherwise ordered.
Cement shall be used by bags, with one bag weighing 50 Kg.
Materials like Steel, Cement, paint, bitumen must be of approved quality and specification, tested in Departmental Laboratory and approved before use.
Contractor must arrange necessary tools and plants for efficient execution.
Contractor must arrange all requisite equipment for testing one unplugged well and specified span free of cost as directed by the Engineer-in-Charge.
Contractor must conduct own boring before starting work and get samples tested to ascertain S.B.C. and strata credibility.
Concrete test specimens (150mm x 150mm x 150mm) must be taken for each structural member and tested in Departmental Quality Control and Research Laboratory.
The maximum tolerance permissible in well sinking is 1:80 for tilt and 150mm for shift.
Concrete of strength below the required strength will not be accepted.
Contractor must abide by the C.P.W.D. safety code rules.

Source: Original DTCNView source document

Contract conditions

16 items

Time for completion is 12 (Twelve) Calendar months.
Bids received online will be opened at 11:00 AM on 18.11.2026.
The amount put to bid is exclusive of GST; GST will be paid over the work bill amount at the time of payment.

Show 13 more

Bid for the work shall remain open for acceptance for a period of 90 days from the last date of receipt of bids.
The lowest preferred bidder must produce original Registration, GSTIN, and ownership/hiring documents for plants and machineries within five days of price bid opening.
Failure to produce original documents by the lowest successful bidder will result in debarment for 3 years and blacklisting.
The quantity mentioned can be increased or reduced by 10% for individual items, subject to a maximum of 5% over the estimated cost.
The defect liability period for the work is 24 (twenty-four) calendar months from the date of successful completion.
The contractor is responsible for making good all injuries, damages, and repairs occasioned by fire or other causes, and holds the Government harmless for claims.
No claim will be entertained for loss due to earthquake, flood, cyclone, epidemic, riot, or other calamities; damages must be made good by the contractor at their own cost.
Price adjustment for labour, materials, fuels, and lubricants will apply for work done up to the initial intended completion date or approved extensions.
No interest is chargeable for dues or additional dues.
The contractor must pay royalty, EMF, DMF, and additional charges for minor minerals and produce proof of payment with bills.
Failure to execute the agreement within the stipulated date will result in debarment for 180 days.
If the L1 bidder fails to turn up for agreement, they will be debarred for three years and blacklisted; L2 may be called if they negotiate to L1's rate.
The minimum period of blocking of Portal Registration shall be no less than 180 days for violations like failing to furnish original documents, backing out of bid, or furnishing false information.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Bill of quantities

38 priced items · ₹3.45 Cr (₹3,45,34,109)

Download BOQ file

Major components

Share of BOQ amount, grouped by item description

Reinforcement steel20%₹69.46 L
Concrete & RCC13%₹46.52 L
Earthwork & excavation6%₹20.12 L
Road & bituminous work5%₹17.90 L
Flooring & tiling4%₹13.79 L
Doors, windows & steelwork2%₹5.83 L

Largest items

By amount

Straightening, cutting, bending binding M/S or T.S. rods and placing in position etc. completeItem 16 · 1,446.82 qtl₹1.32 Cr
Reinforced Cement Concrete M 25 Grade using 20mm down graded chips in Foundation and Plinth.Item 15 · 378.74 cum₹39.99 L
Reinforced Cement Concrete M 30 Grade using 20mm down graded chips in Foundation and Plinth.(Foundation)Item 7 · 455.15 cum₹29.25 L
Plain Cement Concrete M15 Grade using 40mm down graded chips in Foundation and Plinth.Item 6 · 399.65 cum₹22.04 L
Retaining Wall/ Wing WallItem 11 · 102.68 cum₹16.35 L

Tender details

Tender reference: BLGR-Online-27/2026-27
Tender ID: 2026_CERWI_144517_1
District: Balangir
Location: Titilagarh
Tender type: National Competitive Bid
Tender category: Works
Period of work: 365 days

Show all 9 fields

Product category: Civil Works - Bridges
Pincode: 767033

Authority

State
Government of Odisha
Department
CE RW I
Organisation
RWCIRCLE-BALANGIR
Inviting authority
Chief Construction Engineer, R.W.Circle, Bolangir

All CE RW I tenders in Balangir →

Costs

Estimated value: ₹3,45,30,000; ₹3.45 crore
EMD / bid security: ₹3,45,350; Exemption available for eligible bidders
Tender fee: ₹10,000; Cost of bid document

Bid validity: 90 days

Security & deductions from the DTCN (6)

EMD required is 1% of the estimated cost, to be submitted online.
Withdrawal of bid or modification of terms before the validity period will result in forfeiture of EMD.
Additional Performance Security (APS) is required if the accepted bid price is below the estimated cost, ranging from 0.1% to 5% of the bid price depending on the percentage below the estimate.
APS must be furnished within seven days of Letter of Acceptance (LOA) in the form of Term Deposit Receipt or Bank Guarantee.
Failure to furnish APS will result in bid cancellation, debarment for 180 days, and blacklisting proceedings.
CESS @ 1% of the amount of each bill shall be deducted.

Source: Original DTCN

Frequently asked questions

About this tender

Eligibility & bid requirements

DTCN analysed54 requirements extracted17 documents identifiedExtracted from the official tender document

Eligibility

8 items

Eligible class of contractors of Government of Odisha or equivalent class of other State Government/Railways/CPWD/MES.
Joint Ventures are allowed for works exceeding Rs. 10.00 crore, with a maximum of three constituents, where the lead partner is a registered contractor of appropriate class in the State.
Contractors not registered with the Government of Odisha can participate but must register with the appropriate authority before work award.

Show 5 more

Must not have abandoned any work of similar nature or had their contract rescinded in the last five years.
Must possess a valid Registration Certificate of the required class.
Must have an up-to-date GSTIN Certificate and PAN Card.
For works up to Rs. 5.00 crores, no specific qualifying criteria except clauses 14(a), (b), (c), (d), and 14(h).
If a well is beyond rectification, it must be abandoned and another sunk at the contractor's cost.

Source: Original DTCNView source document

Experience

1 item

For works exceeding Rs. 5.00 crores, must have executed similar nature of work worth 75% of the estimated cost in any three financial years of the last five preceding years (2021-22 to 2025-26), excluding the current financial year.

Source: Original DTCNView source document

Financial

8 items

Must have a total financial turnover in Civil Engineering works not less than the amount put to tender in any three financial years of the last five preceding years (2021-22 to 2025-26), excluding the current financial year.
Required Bid Capacity must be more than the estimated cost of the work, calculated as (A*N*2-B), where A is maximum work value in one year, N is completion period, and B is value of existing commitments.
EMD required is 1% of the estimated cost, to be submitted online.

Show 5 more

Withdrawal of bid or modification of terms before the validity period will result in forfeiture of EMD.
Additional Performance Security (APS) is required if the accepted bid price is below the estimated cost, ranging from 0.1% to 5% of the bid price depending on the percentage below the estimate.
APS must be furnished within seven days of Letter of Acceptance (LOA) in the form of Term Deposit Receipt or Bank Guarantee.
Failure to furnish APS will result in bid cancellation, debarment for 180 days, and blacklisting proceedings.
CESS @ 1% of the amount of each bill shall be deducted.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

21 items

Must have possession of specified machineries either owned or on hire/lease, with proof of ownership (invoice/sale deed/RC Book) or long-term lease deed (minimum completion period + 90 days).
Super Class contractors must employ two Graduate Engineers and two Diploma holders from Odisha.
Special Class contractors must employ one Graduate Engineer and two Diploma holders from Odisha.

Show 18 more

'A' Class contractors must employ one Graduate Engineer or two Diploma holders from Odisha.
Must possess compatible Digital Signature Certificates (DSC) of required Class (Class II or Class III).
Must furnish information on work in hand in complete shape as per Schedule-G.
Must have specific machineries for bridge construction (Hydraulic Excavator, Vibratory Roller/Soil Compactor, Self-loading Concrete Mixer, Generator, Crawler Crane for well foundation, Piling Rig with Bentonite Pump for pile foundation).
Work programme must be submitted at the time of agreement execution.
All reinforced cement concrete work must conform to IRC Code and Bridge Code section I, II, III, IV and VII & latest design criteria for prestressed concrete bridges.
MoSRT&H Specification for Road & Bridge work (Latest Revision) shall be the guiding book for execution, quality assurance, specification and measurement.
Steel shuttering & centring, lined with suitable sheeting and made leak proof/water tight, must be used.
Concrete must be machine mixed unless otherwise ordered.
Cement shall be used by bags, with one bag weighing 50 Kg.
Materials like Steel, Cement, paint, bitumen must be of approved quality and specification, tested in Departmental Laboratory and approved before use.
Contractor must arrange necessary tools and plants for efficient execution.
Contractor must arrange all requisite equipment for testing one unplugged well and specified span free of cost as directed by the Engineer-in-Charge.
Contractor must conduct own boring before starting work and get samples tested to ascertain S.B.C. and strata credibility.
Concrete test specimens (150mm x 150mm x 150mm) must be taken for each structural member and tested in Departmental Quality Control and Research Laboratory.
The maximum tolerance permissible in well sinking is 1:80 for tilt and 150mm for shift.
Concrete of strength below the required strength will not be accepted.
Contractor must abide by the C.P.W.D. safety code rules.

Source: Original DTCNView source document

Contract conditions

16 items

Time for completion is 12 (Twelve) Calendar months.
Bids received online will be opened at 11:00 AM on 18.11.2026.
The amount put to bid is exclusive of GST; GST will be paid over the work bill amount at the time of payment.

Show 13 more

Bid for the work shall remain open for acceptance for a period of 90 days from the last date of receipt of bids.
The lowest preferred bidder must produce original Registration, GSTIN, and ownership/hiring documents for plants and machineries within five days of price bid opening.
Failure to produce original documents by the lowest successful bidder will result in debarment for 3 years and blacklisting.
The quantity mentioned can be increased or reduced by 10% for individual items, subject to a maximum of 5% over the estimated cost.
The defect liability period for the work is 24 (twenty-four) calendar months from the date of successful completion.
The contractor is responsible for making good all injuries, damages, and repairs occasioned by fire or other causes, and holds the Government harmless for claims.
No claim will be entertained for loss due to earthquake, flood, cyclone, epidemic, riot, or other calamities; damages must be made good by the contractor at their own cost.
Price adjustment for labour, materials, fuels, and lubricants will apply for work done up to the initial intended completion date or approved extensions.
No interest is chargeable for dues or additional dues.
The contractor must pay royalty, EMF, DMF, and additional charges for minor minerals and produce proof of payment with bills.
Failure to execute the agreement within the stipulated date will result in debarment for 180 days.
If the L1 bidder fails to turn up for agreement, they will be debarred for three years and blacklisted; L2 may be called if they negotiate to L1's rate.
The minimum period of blocking of Portal Registration shall be no less than 180 days for violations like failing to furnish original documents, backing out of bid, or furnishing false information.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Costs

Estimated value

₹3,45,30,000

₹3.45 crore

EMD / bid security

₹3,45,350

Exemption available for eligible bidders

Tender fee

₹10,000

Cost of bid document

Bid validity: 90 days

Security & deductions from the DTCN (6)

EMD required is 1% of the estimated cost, to be submitted online.
Withdrawal of bid or modification of terms before the validity period will result in forfeiture of EMD.
Additional Performance Security (APS) is required if the accepted bid price is below the estimated cost, ranging from 0.1% to 5% of the bid price depending on the percentage below the estimate.
APS must be furnished within seven days of Letter of Acceptance (LOA) in the form of Term Deposit Receipt or Bank Guarantee.
Failure to furnish APS will result in bid cancellation, debarment for 180 days, and blacklisting proceedings.
CESS @ 1% of the amount of each bill shall be deducted.

Source: Original DTCN

Frequently asked questions

Construction of Bridge over Local Nallah on Sanabanki to Jamki via Majhipada Road in the district of Bolangir under SBY for the year 2026-27 (Open Foundation)

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

Construction of Bridge over Local Nallah on Sanabanki to Jamki via Majhipada Road in the district of Bolangir under SBY for the year 2026-27 (Open Foundation)

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more