What is the last date to bid for this tender?

Bids must be submitted on the Odisha eProcurement portal (tendersodisha.gov.in) by 30 Oct 2026, 05:00 PM. Bids are scheduled to open on 03 Nov 2026, 11:30 AM.

What is the estimated value of this tender?

The estimated tender value is ₹30.43 L (₹30,43,374).

How much EMD is required?

The EMD (bid security) is ₹30.4K (₹30,434). The portal lists EMD exemption as available for eligible bidders — check the DTCN for who qualifies.

Who can bid for this tender?

The DTCN states: Contractors must be 'B' Class, 'C' Class, or 'D' Class; Contractors must be registered with State Governments or equivalent grades/classes registered with Central Government/MES/Railways for execution of Building Works.

What work experience is required?

As extracted from the DTCN: Contractors or their identified sub-contractors (for composite bids) must possess valid licenses for water supply/sanitary engineering/electrical works and have executed similar works.

Which department issued this tender?

This tender was issued by Panchayati Raj and Drinking Water Department Odisha, Zilla Parisad Sambalpur, RENGALI Block; the tender inviting authority is the BLOCK DEVELOPMENT OFFICER, RENGALI.

What documents are required to submit a bid?

The DTCN lists 17 documents, including Cost of Tender Paper (Demand Draft), Bid Security (EMD), Registration Certificate, GSTIN, PAN Card, Original Affidavit, and 11 more.

OtherClosed

Const of market Complex at Jhanda Chowk Rengali

OdishaPanchayati Raj and Drinking Water Department OdishaRENGALI Block

Tender ID 2026_PRREN_143613_1Ref PS/REN/SBP/DEV/04/2026-27

Estimated value: ₹30.43 L
EMD: ₹30.4K; Exemption available
Tender fee: ₹6.0K
Work period: —

Bid submission

Closed

Closed on 30 Oct 2026, 05:00 PM

Bid submission for this tender has closed. Browse closed tenders in the archive →

About this tender

Panchayati Raj and Drinking Water Department Odisha has invited bids for “Const of market Complex at Jhanda Chowk Rengali” in Rengali, Odisha. The estimated tender value is ₹30.43 lakh. Bids must be submitted by 30 Oct 2026, 05:00 PM.

Bid readiness

Based on the tender, not your profile

Not available: Bid submission has closed
Done: BOQ available · 38 items
Done: DTCN analysed · 79 requirements extracted
Done: 17 required documents identified
Needs review: Experience requirement needs review
Needs review: Financial requirements need review

Review requirements

Important dates

All times IST, as published on the portal

Published16 Oct 2026, 12:00 PM
Document downloadUntil 30 Oct 2026
Submission deadline30 Oct 2026, 05:00 PM
Bid opening03 Nov 2026, 11:30 AM

Tender intelligence

Eligibility & bid requirements

DTCN analysed79 requirements extracted17 documents identifiedExtracted from the official tender document

This tender from the Panchayat Samiti, Rengali, Sambalpur, Odisha, invites bids for nine different development works, including construction of boundary walls, landscaping, market complexes, and additional classrooms, with estimated costs ranging from Rs 18.00 Lakh to Rs 90.00 Lakhs. The works are open to 'B', 'C', and 'D' Class contractors registered with State Governments, Central Government, MES, or Railways. Bidders must submit their bids online and provide hard copies of essential documents.

Eligibility

10 items

Contractors must be 'B' Class, 'C' Class, or 'D' Class.
Contractors must be registered with State Governments or equivalent grades/classes registered with Central Government/MES/Railways for execution of Building Works.
Proof of registration from the appropriate authority must be enclosed with the bid.

Show 7 more

If successful and not registered under the state government, the bidder must register under the state PWD in the appropriate class before signing the agreement.
Bidders must not be associated, directly or indirectly, with the Consultant or any other entity that prepared the design, specifications, or documents for the Project or is proposed as Project Manager.
Bidders must declare if they have a relative employed as an Officer in the rank of Assistant Engineer/Under Secretary and above in the Government of Orissa in the concerned Department.
Bids from Joint ventures are acceptable.
Contractors must possess a Compatible Digital Signature Certificate (DSC) of Class II or Class III.
Contractors must have sound financial background capable of investing required amount for advance procurement of all materials.
Contractors whose contract for any work has been rescinded or who have abandoned any work in the last five years prior to the bid date are debarred from qualification.

Source: Original DTCNView source document

Experience

1 item

Contractors or their identified sub-contractors (for composite bids) must possess valid licenses for water supply/sanitary engineering/electrical works and have executed similar works.

Source: Original DTCNView source document

Financial

13 items

Engineer Contractors availing EMD exemption must submit an affidavit stating they have not availed the facility for more than two works (excluding this one) during the current financial year, mentioning the works and authorities.
Hard copies of tender confirmation letter, original EMD, original cost of tender paper (DD), Registration Certificate, GSTIN, PAN, Original Affidavit, No Relation Certificate, and other requisite documents must be submitted through dropbox on or before 11:15 AM on 03.11.2026.
Bid Security (EMD) is 1% of the estimated cost, pledged in favour of Block Development Officer, Rengali, Sambalpur, in specified forms.

Show 10 more

Bidders hiring machineries or equipment from outside the State or owned but deployed outside the state are required to furnish an additional 1% of the amount put to tender as Bid security.
Additional performance security will be obtained from bidders when the bid amount is less than the estimated cost put to tender, based on a sliding scale for bids below 10% and 20% of the project cost.
Additional performance security must be deposited within 7 days of the issue of the letter of acceptance.
No preference will be given to Local MSMEs/Start-ups for EMD exemption or concessional payment of Performance Security.
Bids received without required EMD will be rejected.
If a bidder withdraws after opening but within the validity period, or seeks revision of rates, or fails to submit original documents, or fails to sign the agreement/furnish performance security, the Bid Security will be forfeited.
The successful bidder must furnish Performance Security and additional Performance Security (if any) within 15 days of the issue of the letter of acceptance, which will be 2% of the tendered amount (including EMD).
The security deposit will be refunded after 12 months of completion of the work and payment of the final bill and will not carry any interest.
The prevailing percentage of Income Tax and GST will be deducted from the contractor's bill.
Cess @1% will be deducted from the contractor's bill.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

31 items

A firm engaged by the Engineer-in-Charge to provide consulting services for the works, and its affiliates, are ineligible to bid.
No Engineer of gazetted rank or other gazetted officer employed in an Engineering Department of the Government of Orissa is allowed to work for a contractor for two years after retirement without prior government permission.
Contractors must furnish evidence of ownership of principal machineries/equipments and secure minimum 60% marks in technical bid criteria.

Show 28 more

Contractors intending to hire/lease equipment must furnish proof of ownership from the company/person providing equipment along with long-term contracts/agreements/lease deeds (minimum 6 months).
Contractors executing several works must furnish a time schedule for movement of equipment/machinery.
Super Class contractors must employ two Graduate Engineers and two Diploma Holders from Odisha.
Special Class contractors must employ one Graduate Engineer and two Diploma Holders from Odisha.
'A' Class contractors must employ one Graduate Engineer or two Diploma Holders from Odisha.
The work involves construction of buildings, boundary walls, landscaping, market complexes, and additional classrooms.
The contractor must comply with the provisions of the Apprentices Act 1961.
The contractor shall be deemed to have satisfied himself as to the correctness and sufficiency of the Tender and of the rates and prices quoted.
The successful bidder shall complete the works by the intended completion date specified in the Contract data.
The contractor must make his own arrangement for all materials unless otherwise specified.
The contractor must arrange for proper storage of materials.
The contractor must arrange necessary tools and plants for efficient execution of work.
The contractor must properly co-ordinate with the execution of P.H. and Electrical works and ensure worker safety.
The contractor must supply samples of all materials for testing and acceptance before procurement.
All materials and finished items of work must be tested through the Engineer-in-charge at appropriate Laboratories according to relevant I.S. specifications.
Tests must be planned and carried out without hampering work progress.
All reinforced cement work must conform to Orissa Detailed specification and have desired compressive strength (in work test) in 15 Cm cubes at 28 days, after mixing and test conducted in accordance with IS 456 and IS 516.
Bailing out of water from foundation, trenches, etc., is the contractor's responsibility.
The contractor must submit monthly returns of skilled and unskilled labour employed.
All fittings for doors and windows, P.H. & Electrical works must be of best quality, conform to relevant I.S. specification, and be approved by the Engineer-in-charge.
After completion, the contractor must arrange equipment for testing buildings if necessary and bear all costs.
All reinforced cement concrete works must be finished smooth, with no extra charges for plastering.
The contractor must arrange samples of materials for testing and approval by the Department.
C.B. bricks must be well burnt, of good quality, approved by the Engineer-in-charge, and conform to minimum strength as per National Building Code.
Standard co-efficient for linear measurement will be adopted for steel consumption.
The contractor must conduct trial boring at his own cost to ascertain SBC and credibility of strata at founding level.
The contractor must arrange materials like Steel, Cement, paint, and bitumen of approved quality and specification from approved manufacturers and get them tested.
Cut pieces of steel more than one meter in length must be returned to the issuing stores without conveyance charges.

Source: Original DTCNView source document

Contract conditions

24 items

The tender cost is Rs.6000.00 or Rs.10,000.00 respectively.
Bids are available from 12:00 Hrs of 16.10.2026 to 17:00 Hrs of 30.10.2026.
Tenders will be opened on 03.11.2026 at 11:30 Hrs.

Show 21 more

Bidders must participate in ONLINE bidding only.
The bid validity period is 90 days.
The intended completion period is 6 or 9 calendar months.
All rates and prices in the bid must cover all taxes, including GST, octroi, and other levies.
The royalty and taxes prevailing on the date of measurement will be considered for deductions.
The contractor is liable to indemnify the Department for compensation under the Workmen's Compensation Act.
The contractor must abide by the fair wages clause.
The contractor must bear the cost of various incidentals, sundries, and contingencies, including rent, royalties, cess, taxes, ferry tolls, conveyance charges, land/building costs, labour camps, water supply, safety equipment, fencing, and compensation for injuries/damages.
No payment will be made for layout, benchmark, level pillars, profiles, and benching/leveling the ground.
After work completion, all surplus materials must be removed, and the site cleared at no extra cost.
No claim for extra items or quantities will be entertained unless a written order is obtained and rates settled beforehand.
The contractor must abide by the C.P.W.D. safety code rules.
No part of the contract shall be sublet without written permission.
The contract price will be adjusted for increase or decrease in rates and prices of labour, Cement, Steel, Bitumen, Pipes, POL, and other material components for contracts with an original stipulated completion period of more than 18 months.
If any advance/secured advance is granted, it will bear interest at 18% P.A.
The contractor will be responsible for any misuse, loss, or damages of departmental material, with recovery at 5 times the cost.
No interest is chargeable for dues or additional dues.
The defect liability period is 12 months from the completion of the work.
The contractor must maintain the road/building for 12 months from the date of successful completion.
The contractor shall not employ child labour.
Orissa Bridge & Construction Corporation Ltd. will be allowed a price preference of up to 3%.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Bill of quantities

38 priced items · ₹30.43 L (₹30,43,373)

Download BOQ file

Major components

Share of BOQ amount, grouped by item description

Reinforcement steel23%₹7.13 L
Masonry19%₹5.85 L
Concrete & RCC9%₹2.72 L
Flooring & tiling9%₹2.66 L
Electrical8%₹2.46 L
Plaster, paint & finishing5%₹1.42 L

Largest items

By amount

Straightening bent up or coiled M.S. rod or HYSD steel (Fe- 415), cutting, bending, cracking, hooking, weldin…Item 14 · 74.6 One Quintal₹7.13 L
Supplying, and TC of steel angle iron door & window with steel angle iron frame manufactured from standard ro…Item 32 · 1,536 One KG₹2.46 L
G) Slab Ground FloorItem 12 · 17.72 One Cubic Meter₹2.43 L
Brick work with Fly Ash Bricks in cement mortar (1:6) in Foundation and Plinth of size( 23cm x 11cm x 8 cm) h…Item 4 · 40.89 One Cubic Meter₹2.29 L
Brick work with Fly Ash Bricks in cement mortar (1:6) in Superstructure of size( 25cm x 12cm x 8 cm) having c…Item 16 · 40.03 One Cubic Meter₹2.25 L

Tender details

Tender reference: PS/REN/SBP/DEV/04/2026-27
Tender ID: 2026_PRREN_143613_1
Location: Rengali
Tender type: Open Tender
Tender category: Works

Show all 7 fields

Product category: Civil Works - Buildings
Pincode: 768212

Authority

State
Government of Odisha
Department
Panchayati Raj and Drinking Water Department Odisha
Organisation
Zilla Parisad Sambalpur
Office
RENGALI Block
Inviting authority
BLOCK DEVELOPMENT OFFICER, RENGALI

Costs

Estimated value: ₹30,43,374; ₹30.43 lakh
EMD / bid security: ₹30,434; Exemption available for eligible bidders
Tender fee: ₹6,000; Cost of bid document

Bid validity: 90 days

Security & deductions from the DTCN (13)

Engineer Contractors availing EMD exemption must submit an affidavit stating they have not availed the facility for more than two works (excluding this one) during the current financial year, mentioning the works and authorities.
Hard copies of tender confirmation letter, original EMD, original cost of tender paper (DD), Registration Certificate, GSTIN, PAN, Original Affidavit, No Relation Certificate, and other requisite documents must be submitted through dropbox on or before 11:15 AM on 03.11.2026.
Bid Security (EMD) is 1% of the estimated cost, pledged in favour of Block Development Officer, Rengali, Sambalpur, in specified forms.
Bidders hiring machineries or equipment from outside the State or owned but deployed outside the state are required to furnish an additional 1% of the amount put to tender as Bid security.
Additional performance security will be obtained from bidders when the bid amount is less than the estimated cost put to tender, based on a sliding scale for bids below 10% and 20% of the project cost.
Additional performance security must be deposited within 7 days of the issue of the letter of acceptance.
No preference will be given to Local MSMEs/Start-ups for EMD exemption or concessional payment of Performance Security.
Bids received without required EMD will be rejected.
If a bidder withdraws after opening but within the validity period, or seeks revision of rates, or fails to submit original documents, or fails to sign the agreement/furnish performance security, the Bid Security will be forfeited.
The successful bidder must furnish Performance Security and additional Performance Security (if any) within 15 days of the issue of the letter of acceptance, which will be 2% of the tendered amount (including EMD).
The security deposit will be refunded after 12 months of completion of the work and payment of the final bill and will not carry any interest.
The prevailing percentage of Income Tax and GST will be deducted from the contractor's bill.
Cess @1% will be deducted from the contractor's bill.

Source: Original DTCN

Frequently asked questions

Eligibility & bid requirements

DTCN analysed79 requirements extracted17 documents identifiedExtracted from the official tender document

Eligibility

10 items

Contractors must be 'B' Class, 'C' Class, or 'D' Class.
Contractors must be registered with State Governments or equivalent grades/classes registered with Central Government/MES/Railways for execution of Building Works.
Proof of registration from the appropriate authority must be enclosed with the bid.

Show 7 more

If successful and not registered under the state government, the bidder must register under the state PWD in the appropriate class before signing the agreement.
Bidders must not be associated, directly or indirectly, with the Consultant or any other entity that prepared the design, specifications, or documents for the Project or is proposed as Project Manager.
Bidders must declare if they have a relative employed as an Officer in the rank of Assistant Engineer/Under Secretary and above in the Government of Orissa in the concerned Department.
Bids from Joint ventures are acceptable.
Contractors must possess a Compatible Digital Signature Certificate (DSC) of Class II or Class III.
Contractors must have sound financial background capable of investing required amount for advance procurement of all materials.
Contractors whose contract for any work has been rescinded or who have abandoned any work in the last five years prior to the bid date are debarred from qualification.

Source: Original DTCNView source document

Experience

1 item

Contractors or their identified sub-contractors (for composite bids) must possess valid licenses for water supply/sanitary engineering/electrical works and have executed similar works.

Source: Original DTCNView source document

Financial

13 items

Engineer Contractors availing EMD exemption must submit an affidavit stating they have not availed the facility for more than two works (excluding this one) during the current financial year, mentioning the works and authorities.
Hard copies of tender confirmation letter, original EMD, original cost of tender paper (DD), Registration Certificate, GSTIN, PAN, Original Affidavit, No Relation Certificate, and other requisite documents must be submitted through dropbox on or before 11:15 AM on 03.11.2026.
Bid Security (EMD) is 1% of the estimated cost, pledged in favour of Block Development Officer, Rengali, Sambalpur, in specified forms.

Show 10 more

Bidders hiring machineries or equipment from outside the State or owned but deployed outside the state are required to furnish an additional 1% of the amount put to tender as Bid security.
Additional performance security will be obtained from bidders when the bid amount is less than the estimated cost put to tender, based on a sliding scale for bids below 10% and 20% of the project cost.
Additional performance security must be deposited within 7 days of the issue of the letter of acceptance.
No preference will be given to Local MSMEs/Start-ups for EMD exemption or concessional payment of Performance Security.
Bids received without required EMD will be rejected.
If a bidder withdraws after opening but within the validity period, or seeks revision of rates, or fails to submit original documents, or fails to sign the agreement/furnish performance security, the Bid Security will be forfeited.
The successful bidder must furnish Performance Security and additional Performance Security (if any) within 15 days of the issue of the letter of acceptance, which will be 2% of the tendered amount (including EMD).
The security deposit will be refunded after 12 months of completion of the work and payment of the final bill and will not carry any interest.
The prevailing percentage of Income Tax and GST will be deducted from the contractor's bill.
Cess @1% will be deducted from the contractor's bill.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

31 items

A firm engaged by the Engineer-in-Charge to provide consulting services for the works, and its affiliates, are ineligible to bid.
No Engineer of gazetted rank or other gazetted officer employed in an Engineering Department of the Government of Orissa is allowed to work for a contractor for two years after retirement without prior government permission.
Contractors must furnish evidence of ownership of principal machineries/equipments and secure minimum 60% marks in technical bid criteria.

Show 28 more

Contractors intending to hire/lease equipment must furnish proof of ownership from the company/person providing equipment along with long-term contracts/agreements/lease deeds (minimum 6 months).
Contractors executing several works must furnish a time schedule for movement of equipment/machinery.
Super Class contractors must employ two Graduate Engineers and two Diploma Holders from Odisha.
Special Class contractors must employ one Graduate Engineer and two Diploma Holders from Odisha.
'A' Class contractors must employ one Graduate Engineer or two Diploma Holders from Odisha.
The work involves construction of buildings, boundary walls, landscaping, market complexes, and additional classrooms.
The contractor must comply with the provisions of the Apprentices Act 1961.
The contractor shall be deemed to have satisfied himself as to the correctness and sufficiency of the Tender and of the rates and prices quoted.
The successful bidder shall complete the works by the intended completion date specified in the Contract data.
The contractor must make his own arrangement for all materials unless otherwise specified.
The contractor must arrange for proper storage of materials.
The contractor must arrange necessary tools and plants for efficient execution of work.
The contractor must properly co-ordinate with the execution of P.H. and Electrical works and ensure worker safety.
The contractor must supply samples of all materials for testing and acceptance before procurement.
All materials and finished items of work must be tested through the Engineer-in-charge at appropriate Laboratories according to relevant I.S. specifications.
Tests must be planned and carried out without hampering work progress.
All reinforced cement work must conform to Orissa Detailed specification and have desired compressive strength (in work test) in 15 Cm cubes at 28 days, after mixing and test conducted in accordance with IS 456 and IS 516.
Bailing out of water from foundation, trenches, etc., is the contractor's responsibility.
The contractor must submit monthly returns of skilled and unskilled labour employed.
All fittings for doors and windows, P.H. & Electrical works must be of best quality, conform to relevant I.S. specification, and be approved by the Engineer-in-charge.
After completion, the contractor must arrange equipment for testing buildings if necessary and bear all costs.
All reinforced cement concrete works must be finished smooth, with no extra charges for plastering.
The contractor must arrange samples of materials for testing and approval by the Department.
C.B. bricks must be well burnt, of good quality, approved by the Engineer-in-charge, and conform to minimum strength as per National Building Code.
Standard co-efficient for linear measurement will be adopted for steel consumption.
The contractor must conduct trial boring at his own cost to ascertain SBC and credibility of strata at founding level.
The contractor must arrange materials like Steel, Cement, paint, and bitumen of approved quality and specification from approved manufacturers and get them tested.
Cut pieces of steel more than one meter in length must be returned to the issuing stores without conveyance charges.

Source: Original DTCNView source document

Contract conditions

24 items

The tender cost is Rs.6000.00 or Rs.10,000.00 respectively.
Bids are available from 12:00 Hrs of 16.10.2026 to 17:00 Hrs of 30.10.2026.
Tenders will be opened on 03.11.2026 at 11:30 Hrs.

Show 21 more

Bidders must participate in ONLINE bidding only.
The bid validity period is 90 days.
The intended completion period is 6 or 9 calendar months.
All rates and prices in the bid must cover all taxes, including GST, octroi, and other levies.
The royalty and taxes prevailing on the date of measurement will be considered for deductions.
The contractor is liable to indemnify the Department for compensation under the Workmen's Compensation Act.
The contractor must abide by the fair wages clause.
The contractor must bear the cost of various incidentals, sundries, and contingencies, including rent, royalties, cess, taxes, ferry tolls, conveyance charges, land/building costs, labour camps, water supply, safety equipment, fencing, and compensation for injuries/damages.
No payment will be made for layout, benchmark, level pillars, profiles, and benching/leveling the ground.
After work completion, all surplus materials must be removed, and the site cleared at no extra cost.
No claim for extra items or quantities will be entertained unless a written order is obtained and rates settled beforehand.
The contractor must abide by the C.P.W.D. safety code rules.
No part of the contract shall be sublet without written permission.
The contract price will be adjusted for increase or decrease in rates and prices of labour, Cement, Steel, Bitumen, Pipes, POL, and other material components for contracts with an original stipulated completion period of more than 18 months.
If any advance/secured advance is granted, it will bear interest at 18% P.A.
The contractor will be responsible for any misuse, loss, or damages of departmental material, with recovery at 5 times the cost.
No interest is chargeable for dues or additional dues.
The defect liability period is 12 months from the completion of the work.
The contractor must maintain the road/building for 12 months from the date of successful completion.
The contractor shall not employ child labour.
Orissa Bridge & Construction Corporation Ltd. will be allowed a price preference of up to 3%.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Costs

Estimated value

₹30,43,374

₹30.43 lakh

EMD / bid security

₹30,434

Exemption available for eligible bidders

Tender fee

₹6,000

Cost of bid document

Bid validity: 90 days

Security & deductions from the DTCN (13)

Engineer Contractors availing EMD exemption must submit an affidavit stating they have not availed the facility for more than two works (excluding this one) during the current financial year, mentioning the works and authorities.
Hard copies of tender confirmation letter, original EMD, original cost of tender paper (DD), Registration Certificate, GSTIN, PAN, Original Affidavit, No Relation Certificate, and other requisite documents must be submitted through dropbox on or before 11:15 AM on 03.11.2026.
Bid Security (EMD) is 1% of the estimated cost, pledged in favour of Block Development Officer, Rengali, Sambalpur, in specified forms.
Bidders hiring machineries or equipment from outside the State or owned but deployed outside the state are required to furnish an additional 1% of the amount put to tender as Bid security.
Additional performance security will be obtained from bidders when the bid amount is less than the estimated cost put to tender, based on a sliding scale for bids below 10% and 20% of the project cost.
Additional performance security must be deposited within 7 days of the issue of the letter of acceptance.
No preference will be given to Local MSMEs/Start-ups for EMD exemption or concessional payment of Performance Security.
Bids received without required EMD will be rejected.
If a bidder withdraws after opening but within the validity period, or seeks revision of rates, or fails to submit original documents, or fails to sign the agreement/furnish performance security, the Bid Security will be forfeited.
The successful bidder must furnish Performance Security and additional Performance Security (if any) within 15 days of the issue of the letter of acceptance, which will be 2% of the tendered amount (including EMD).
The security deposit will be refunded after 12 months of completion of the work and payment of the final bill and will not carry any interest.
The prevailing percentage of Income Tax and GST will be deducted from the contractor's bill.
Cess @1% will be deducted from the contractor's bill.

Source: Original DTCN

Frequently asked questions

Const of market Complex at Jhanda Chowk Rengali

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

Const of market Complex at Jhanda Chowk Rengali

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more