What is the last date to bid for this tender?

Bids must be submitted on the Odisha eProcurement portal (tendersodisha.gov.in) by 31 Oct 2026, 05:00 PM. Bids are scheduled to open on 02 Nov 2026, 11:00 AM.

What is the estimated value of this tender?

The estimated tender value is ₹20.85 L (₹20,85,000).

How much EMD is required?

The EMD (bid security) is ₹20.9K (₹20,850). The portal lists EMD exemption as available for eligible bidders — check the DTCN for who qualifies.

Who can bid for this tender?

The DTCN states: Contractors must have a valid Civil license of requisite class ("B", "C", "D" as per tender) registered with State RWSS/PHED/Irrigation/Minor Irrigations/RW/PWD; Contractors must have a valid H.T. License issued by ELBO.

What work experience is required?

As extracted from the DTCN: Bidders must have satisfactorily completed (not less than 80% of the original contract value) at least one similar work of not less than 40% of the proposed contract value in the last 5 years; A weightage of 10% per year shall be given to the cost of satisfactorily completed works of previous years to bring them to the current price level.

What is the completion period?

The period of work is 180 days, and bids must remain valid for 365 days.

Which department issued this tender?

This tender was issued by Orissa Lift Irrigation Corporation, LI Southern Circle Berhampur, LI Division Berhampur; the tender inviting authority is the Executive Engineer, L.I. Division, Berhampur.

What documents are required to submit a bid?

The DTCN lists 12 documents, including Online/Over the counter generated Paper cost & EMD challan, Valid Civil License, Valid Electrical (H.T) License, Valid GSTIN certificate, Valid PAN, Valid joint venture agreement (Registered), and 6 more.

OtherClosed

Ambapua T/W

OdishaOrissa Lift Irrigation CorporationLI Division Berhampur

Tender ID 2026_OLIC_143574_35Ref OLIC/BRAHMAPUR/02-2026-27

Estimated value: ₹20.85 L
EMD: ₹20.9K; Exemption available
Tender fee: ₹7.1K
Work period: 180 days

Bid submission

Closed

Closed on 31 Oct 2026, 05:00 PM

Bid submission for this tender has closed. Browse closed tenders in the archive →

About this tender

Orissa Lift Irrigation Corporation has invited bids for “Ambapua T/W” in Ambapua under Kabisurya Nagar Block, Odisha. The estimated tender value is ₹20.85 lakh and the completion period is 180 days. Bids must be submitted by 31 Oct 2026, 05:00 PM.

Bid readiness

Based on the tender, not your profile

Not available: Bid submission has closed
Done: BOQ available · 68 items
Done: DTCN analysed · 51 requirements extracted
Done: 12 required documents identified
Needs review: Experience requirement needs review
Needs review: Financial requirements need review

Review requirements

Important dates

All times IST, as published on the portal

Published21 Oct 2026, 11:00 AM
Document downloadUntil 31 Oct 2026
Submission deadline31 Oct 2026, 05:00 PM
Bid opening02 Nov 2026, 11:00 AM

Tender intelligence

Eligibility & bid requirements

DTCN analysed51 requirements extracted12 documents identifiedExtracted from the official tender document

The Odisha Lift Irrigation Corporation Ltd. (OLIC) invites bids for the installation and energization of 50 new Tube Well Lift Irrigation Projects across various blocks in Ganjam District. The projects range in estimated cost from Rs. 18.31 Lakhs to Rs. 30.15 Lakhs, with a completion period of 90 days. Contractors registered with the State Government or equivalent central government bodies, holding valid Civil and HT Licenses, are eligible to bid, with specific provisions for joint ventures.

Eligibility

7 items

Contractors must have a valid Civil license of requisite class ("B", "C", "D" as per tender) registered with State RWSS/PHED/Irrigation/Minor Irrigations/RW/PWD.
Contractors must have a valid H.T. License issued by ELBO.
Both Civil and H.T. Licenses must be valid for at least 1 month from the date of tender opening.

Show 4 more

Contractors must have a valid GST Registration certificate and PAN issued by I.T. Department.
For Tube Well projects, bidders who do not own a DTH/Mud rotary Rig must submit a registered joint venture agreement with Rig owners/Contractors having ownership.
The joint venture agreement must be registered at the Sub-Register/District Registration Office as per the Registration Act 1908, with an agreement period of not less than 18 months.
Bidders who have shown unsatisfactory progress or have been declared defaulter contractors are not eligible.

Source: Original DTCNView source document

Experience

4 items

Bidders must have satisfactorily completed (not less than 80% of the original contract value) at least one similar work of not less than 40% of the proposed contract value in the last 5 years.
A weightage of 10% per year shall be given to the cost of satisfactorily completed works of previous years to bring them to the current price level.
Drilling contractors/Rig owners participating in a joint venture for Tube Well projects must have a minimum of 3 years' experience in successful drilling works.

Show 1 more

The experience certificate of the drilling contractor must be issued by a competent authority not below the rank of Divisional Officer.

Source: Original DTCNView source document

Financial

5 items

EMD @ 1% must be deposited by the bidder in Online Mode through the e_portal.
If a bidder withdraws or modifies their bid before the validity period, the EMD/ISD will be forfeited.
Initial Security Deposit (ISD) of 1% of the accepted tendered amount must be deposited within 7 days from the date of issue of the letter of intent.

Show 2 more

Additional Performance Security (APS) will be calculated incrementally based on the Rounding Off of Percentage Less (ROPL) of the accepted Bid Price compared to the Cost Put to Tender, as per OM No- 07764600022025-17941/W Dated 08.10.2026.
The APS shall be refunded immediately on successful completion of the work within 7 days of issuance of Completion Certificate/Provisional Completion Certificate.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

21 items

SC/ST Contractors, Engineer Contractors, or Physically Handicapped Contractors with both Civil and Electrical Licenses may receive Price Preference & Other Financial benefits as per OPWD Code.
The work involves installation and energization of 50 new Tube Well Lift Irrigation Projects, including supply of materials and labor.
Contractors must erect HT, LT lines, commission Sub-Stations with all required materials, and hand over to TPSODL Electrical Division, Brahmapur after inspection by Electrical Inspector.

Show 18 more

Power supply work must adhere to REC specifications and sanctioned estimates provided by TPSODL, Electrical Division, Brahmapur.
The project must be handed over to the concerned Pani Panchayat after completion and successful trial run.
All construction works (Pump Chamber, Fixed foundation, Distribution Tank, ARV Tank, Butterfly Valve Tank, Supporting Pillar, laying of pipes) must be executed as per enclosed specifications (Annexure-II) and Engineer-in-Charge's direction.
Materials supplied must conform to specifications in Annexure-III for Civil works and relevant latest editions of BIS/REC Construction standards.
HDPE pipes (160 mm dia PE_80-PN_4 / 200 mm dia PE_80-PN_4 / 250 mm dia PE_80-PN_6) must conform to IS-4985/2000 and be ISI Marked.
Both pre-delivery and post-delivery test reports by CIPET, Odisha are required for HDPE pipes.
G.I. pipes must conform to IS-1239 (Pt 1/2004) with specified diameters and wall thicknesses, and be ISI certified.
Pumps must be 3 Phase Mono Block squirrel cage induction and centrifugal pump sets (with bronze impeller) having discharge 28 LPS at various heads, with BEE specification and energy efficiency.
Control panel starters must be Auto-Star delta type suitable for 10 HP to 15 HP squirrel cage induction motors, with overload and single phasing preventer, Volt Meter, Amper Meter & MCB.
PVC insulated (heavy duty) armored aluminum cables must conform to IS-1554(Part 1)/1988 for 1100 Volts.
PVC copper wire for connections must conform to IS 694, be multi-strand 4 mm2 size, and for 1100 Volt operation.
Main switches must conform to IS-4064/Part I & II with ISI Mark, Triple pole & neutral, 440 Volt, with re-wireable fuse of 63 AMP or 100 AMP.
G.I. Fittings, C.I. Foot Valve/NR Valve/Sluice Valve, C.I. Air Release Valve, and HDPE Fittings must conform to their respective IS standards and be ISI marked where applicable.
Electrical construction works must adhere to REC standard and specification as per TPSODL, BOED, Brahmapur sanctioned estimate.
The contractor must arrange for inspection by the Electrical Inspector and obtain formal approval for energization of the sub-station.
The contractor must arrange for testing of the transformer by an approved authority before commissioning.
The contractor must liaison with TPSODL, Electrical Division, Brahmapur for execution of agreement of Pani Panchayat, shut down, connection, charging of S/S, and handing over.
The contractor must obtain an M.V. Inspection report from the Assistant Electrical Inspector concerned on the installation of the pump.

Source: Original DTCNView source document

Contract conditions

14 items

The period of completion for all projects is 90 days from the date of issue of the work order.
The bid will remain open for acceptance for a period of 365 days from the last date of receipt of bids.
The successful bidder must submit originals of all scanned documents within 5 days from the date of bid opening for verification.

Show 11 more

If more than one bidder is L1, a transparent lottery system will decide the tender.
Not more than 7 packages shall ordinarily be awarded to a single contractor; the authority reserves the right to reject excess packages.
The successful tenderer must execute agreements within 7 days from the date of issue of the letter of intent.
The contractor must quote the Percentage Rate excess or less up to two digits only after the decimal point.
Payment to the contractor will be made on a "First & Final bill" basis after successful trial of the Project and handing over to the concerned Pani Panchayat/TPSODL.
The contractor must furnish a guarantee for 18 months from the date of handing over, covering defects in materials and workmanship.
Compensation for delay will be ½ percent on the estimated cost for every day the work remains uncompleted, up to a maximum of 10 percent of the estimated cost.
If the contractor fails to produce original documents, they will be debarred for three years and blacklisted.
Unilateral stoppage of work without prior written permission will be considered a breach of contract.
The contractor is responsible for safe custody of materials at the site.
The contractor must bear all taxes including GST, Income Tax, Royalty, fair weather charges, and Labour cess.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Bill of quantities

68 priced items · ₹20.48 L (₹20,48,122)

Download BOQ file

Major components

Share of BOQ amount, grouped by item description

Plumbing & water supply41%₹8.50 L
Electrical24%₹4.98 L
Earthwork & excavation21%₹4.27 L
Plaster, paint & finishing8%₹1.69 L
Concrete & RCC2%₹43.4K
Masonry2%₹37.0K

Largest items

By amount

Cost, Supplying of ISI marked High Density Polythelene (HDPE) Pipes for water supply as per IS 4984/2016 in t…Item 1.37 · 690 M₹3.75 L
Construction erection of 11/0.416 KV, 25 KVA (BIS level-II star 2) D.P mounted Sub-Station including transfor…Item 1.53 · 1 NO₹3.67 L
Fitting of 160 mm outer dia High Density Polythylene Pipes of specified material grade pressure rating by but…Item 1.14 · 690 M₹2.46 L
Construction of outlet at TankItem 1.17 · 20 NO₹1.78 L
Construction of 3 phase 3 wire 11 KV HT line as per REC standard confirming to RE Rules 1956 excluding 400 Kg…Item 1.52 · 0.32 KM₹1.63 L

Tender details

Tender reference: OLIC/BRAHMAPUR/02-2026-27
Tender ID: 2026_OLIC_143574_35
Location: Ambapua under Kabisurya Nagar Block
Tender type: Open Tender
Tender category: Works
Period of work: 180 days

Show all 8 fields

Product category: Civil Works - Lift Irrigation Schemes
Pincode: 760006

Authority

State
Government of Odisha
Department
Orissa Lift Irrigation Corporation
Organisation
LI Southern Circle Berhampur
Office
LI Division Berhampur
Inviting authority
Executive Engineer, L.I. Division, Berhampur

Costs

Estimated value: ₹20,85,000; ₹20.85 lakh
EMD / bid security: ₹20,850; Exemption available for eligible bidders
Tender fee: ₹7,080; Cost of bid document

Bid validity: 365 days

Security & deductions from the DTCN (5)

EMD @ 1% must be deposited by the bidder in Online Mode through the e_portal.
If a bidder withdraws or modifies their bid before the validity period, the EMD/ISD will be forfeited.
Initial Security Deposit (ISD) of 1% of the accepted tendered amount must be deposited within 7 days from the date of issue of the letter of intent.
Additional Performance Security (APS) will be calculated incrementally based on the Rounding Off of Percentage Less (ROPL) of the accepted Bid Price compared to the Cost Put to Tender, as per OM No- 07764600022025-17941/W Dated 08.10.2026.
The APS shall be refunded immediately on successful completion of the work within 7 days of issuance of Completion Certificate/Provisional Completion Certificate.

Source: Original DTCN

Frequently asked questions

Eligibility & bid requirements

DTCN analysed51 requirements extracted12 documents identifiedExtracted from the official tender document

Eligibility

7 items

Contractors must have a valid Civil license of requisite class ("B", "C", "D" as per tender) registered with State RWSS/PHED/Irrigation/Minor Irrigations/RW/PWD.
Contractors must have a valid H.T. License issued by ELBO.
Both Civil and H.T. Licenses must be valid for at least 1 month from the date of tender opening.

Show 4 more

Contractors must have a valid GST Registration certificate and PAN issued by I.T. Department.
For Tube Well projects, bidders who do not own a DTH/Mud rotary Rig must submit a registered joint venture agreement with Rig owners/Contractors having ownership.
The joint venture agreement must be registered at the Sub-Register/District Registration Office as per the Registration Act 1908, with an agreement period of not less than 18 months.
Bidders who have shown unsatisfactory progress or have been declared defaulter contractors are not eligible.

Source: Original DTCNView source document

Experience

4 items

Bidders must have satisfactorily completed (not less than 80% of the original contract value) at least one similar work of not less than 40% of the proposed contract value in the last 5 years.
A weightage of 10% per year shall be given to the cost of satisfactorily completed works of previous years to bring them to the current price level.
Drilling contractors/Rig owners participating in a joint venture for Tube Well projects must have a minimum of 3 years' experience in successful drilling works.

Show 1 more

The experience certificate of the drilling contractor must be issued by a competent authority not below the rank of Divisional Officer.

Source: Original DTCNView source document

Financial

5 items

EMD @ 1% must be deposited by the bidder in Online Mode through the e_portal.
If a bidder withdraws or modifies their bid before the validity period, the EMD/ISD will be forfeited.
Initial Security Deposit (ISD) of 1% of the accepted tendered amount must be deposited within 7 days from the date of issue of the letter of intent.

Show 2 more

Additional Performance Security (APS) will be calculated incrementally based on the Rounding Off of Percentage Less (ROPL) of the accepted Bid Price compared to the Cost Put to Tender, as per OM No- 07764600022025-17941/W Dated 08.10.2026.
The APS shall be refunded immediately on successful completion of the work within 7 days of issuance of Completion Certificate/Provisional Completion Certificate.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

21 items

SC/ST Contractors, Engineer Contractors, or Physically Handicapped Contractors with both Civil and Electrical Licenses may receive Price Preference & Other Financial benefits as per OPWD Code.
The work involves installation and energization of 50 new Tube Well Lift Irrigation Projects, including supply of materials and labor.
Contractors must erect HT, LT lines, commission Sub-Stations with all required materials, and hand over to TPSODL Electrical Division, Brahmapur after inspection by Electrical Inspector.

Show 18 more

Power supply work must adhere to REC specifications and sanctioned estimates provided by TPSODL, Electrical Division, Brahmapur.
The project must be handed over to the concerned Pani Panchayat after completion and successful trial run.
All construction works (Pump Chamber, Fixed foundation, Distribution Tank, ARV Tank, Butterfly Valve Tank, Supporting Pillar, laying of pipes) must be executed as per enclosed specifications (Annexure-II) and Engineer-in-Charge's direction.
Materials supplied must conform to specifications in Annexure-III for Civil works and relevant latest editions of BIS/REC Construction standards.
HDPE pipes (160 mm dia PE_80-PN_4 / 200 mm dia PE_80-PN_4 / 250 mm dia PE_80-PN_6) must conform to IS-4985/2000 and be ISI Marked.
Both pre-delivery and post-delivery test reports by CIPET, Odisha are required for HDPE pipes.
G.I. pipes must conform to IS-1239 (Pt 1/2004) with specified diameters and wall thicknesses, and be ISI certified.
Pumps must be 3 Phase Mono Block squirrel cage induction and centrifugal pump sets (with bronze impeller) having discharge 28 LPS at various heads, with BEE specification and energy efficiency.
Control panel starters must be Auto-Star delta type suitable for 10 HP to 15 HP squirrel cage induction motors, with overload and single phasing preventer, Volt Meter, Amper Meter & MCB.
PVC insulated (heavy duty) armored aluminum cables must conform to IS-1554(Part 1)/1988 for 1100 Volts.
PVC copper wire for connections must conform to IS 694, be multi-strand 4 mm2 size, and for 1100 Volt operation.
Main switches must conform to IS-4064/Part I & II with ISI Mark, Triple pole & neutral, 440 Volt, with re-wireable fuse of 63 AMP or 100 AMP.
G.I. Fittings, C.I. Foot Valve/NR Valve/Sluice Valve, C.I. Air Release Valve, and HDPE Fittings must conform to their respective IS standards and be ISI marked where applicable.
Electrical construction works must adhere to REC standard and specification as per TPSODL, BOED, Brahmapur sanctioned estimate.
The contractor must arrange for inspection by the Electrical Inspector and obtain formal approval for energization of the sub-station.
The contractor must arrange for testing of the transformer by an approved authority before commissioning.
The contractor must liaison with TPSODL, Electrical Division, Brahmapur for execution of agreement of Pani Panchayat, shut down, connection, charging of S/S, and handing over.
The contractor must obtain an M.V. Inspection report from the Assistant Electrical Inspector concerned on the installation of the pump.

Source: Original DTCNView source document

Contract conditions

14 items

The period of completion for all projects is 90 days from the date of issue of the work order.
The bid will remain open for acceptance for a period of 365 days from the last date of receipt of bids.
The successful bidder must submit originals of all scanned documents within 5 days from the date of bid opening for verification.

Show 11 more

If more than one bidder is L1, a transparent lottery system will decide the tender.
Not more than 7 packages shall ordinarily be awarded to a single contractor; the authority reserves the right to reject excess packages.
The successful tenderer must execute agreements within 7 days from the date of issue of the letter of intent.
The contractor must quote the Percentage Rate excess or less up to two digits only after the decimal point.
Payment to the contractor will be made on a "First & Final bill" basis after successful trial of the Project and handing over to the concerned Pani Panchayat/TPSODL.
The contractor must furnish a guarantee for 18 months from the date of handing over, covering defects in materials and workmanship.
Compensation for delay will be ½ percent on the estimated cost for every day the work remains uncompleted, up to a maximum of 10 percent of the estimated cost.
If the contractor fails to produce original documents, they will be debarred for three years and blacklisted.
Unilateral stoppage of work without prior written permission will be considered a breach of contract.
The contractor is responsible for safe custody of materials at the site.
The contractor must bear all taxes including GST, Income Tax, Royalty, fair weather charges, and Labour cess.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Costs

Estimated value

₹20,85,000

₹20.85 lakh

EMD / bid security

₹20,850

Exemption available for eligible bidders

Tender fee

₹7,080

Cost of bid document

Bid validity: 365 days

Security & deductions from the DTCN (5)

EMD @ 1% must be deposited by the bidder in Online Mode through the e_portal.
If a bidder withdraws or modifies their bid before the validity period, the EMD/ISD will be forfeited.
Initial Security Deposit (ISD) of 1% of the accepted tendered amount must be deposited within 7 days from the date of issue of the letter of intent.
Additional Performance Security (APS) will be calculated incrementally based on the Rounding Off of Percentage Less (ROPL) of the accepted Bid Price compared to the Cost Put to Tender, as per OM No- 07764600022025-17941/W Dated 08.10.2026.
The APS shall be refunded immediately on successful completion of the work within 7 days of issuance of Completion Certificate/Provisional Completion Certificate.

Source: Original DTCN

Frequently asked questions

Ambapua T/W

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

Ambapua T/W

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more