What is the last date to bid for this tender?

Bids must be submitted on the Odisha eProcurement portal (tendersodisha.gov.in) by 06 Nov 2026, 05:00 PM. Bids are scheduled to open on 07 Nov 2026, 11:00 AM.

What is the estimated value of this tender?

The estimated tender value is ₹26.00 L (₹25,99,706).

How much EMD is required?

The EMD (bid security) is ₹26.0K (₹25,997). The portal lists EMD exemption as available for eligible bidders — check the DTCN for who qualifies.

Who can bid for this tender?

The DTCN states: Reputed Contractors/Firms with valid PWD License of required class for Civil Works; Contractors must have a valid HT License issued by ELBO.

What work experience is required?

As extracted from the DTCN: For TW packages, if participating through a joint venture with a rig owner, the rig owner must have experience in drilling works and the contractor must submit an experience certificate from an authority not less than the rank of Executive Officer of the rig holder.

Which department issued this tender?

This tender was issued by Orissa Lift Irrigation Corporation, LI,Central Circle, Cuttack, LI Division Jajpur Road; the tender inviting authority is the Executive Engineer L.I.DIvision, Jajpur Road.

What documents are required to submit a bid?

The DTCN lists 21 documents, including Valid PWD License, Valid HT License, Rig Owner's Experience Certificates (for TW projects if not owning a rig), Rig RC Book (for TW projects), Rig Fitness Certificate (for TW projects), Rig Permit (for TW projects), and 15 more.

OtherLive

PKG76

Jajpur Road, Jajpur Orissa Lift Irrigation CorporationLI Division Jajpur Road

Tender ID 2026_OLIC_144327_82Ref OLIC_02_26_27

Estimated value: ₹26.00 L
EMD: ₹26.0K; Exemption available
Tender fee: ₹7.1K
Work period: —

Closing in

3 days left

06 Nov 2026, 05:00 PM

About this tender

Orissa Lift Irrigation Corporation has invited bids for “PKG76” in Jajpur Road, Jajpur district, Odisha. The estimated tender value is ₹26.00 lakh. Bids must be submitted by 06 Nov 2026, 05:00 PM.

Bid readiness

Based on the tender, not your profile

Done: Tender is currently open
Done: BOQ available · 54 items
Done: DTCN analysed · 81 requirements extracted
Done: 21 required documents identified
Needs review: Experience requirement needs review
Needs review: Financial requirements need review

Review requirements

Important dates

All times IST, as published on the portal

Published30 Oct 2026, 02:00 PM
Document downloadUntil 06 Nov 2026
Submission deadline· 3 days left06 Nov 2026, 05:00 PM
Bid opening07 Nov 2026, 11:00 AM

Tender intelligence

Eligibility & bid requirements

DTCN analysed81 requirements extracted21 documents identifiedExtracted from the official tender document

This tender from the Odisha Lift Irrigation Corporation Ltd. invites bids for the drilling, installation, and energization of 76 Lift Irrigation Projects in Jajpur District on a turnkey basis. The work involves civil works, drilling of tube wells, erection of 11KV and LT lines, and commissioning of electrical substations. Estimated costs range from Rs. 24.60 Lakh to Rs. 29.51 Lakh per package, with a completion period of 90 days for each project. Contractors must possess valid PWD and HT licenses and, for TW projects, either own a truck-mounted mud rotary rig or enter into a joint venture with a rig owner.

Eligibility

8 items

Reputed Contractors/Firms with valid PWD License of required class for Civil Works.
Contractors must have a valid HT License issued by ELBO.
Contractors must be registered with the State Govt. of Odisha or equivalent grade/class registered with other State Govt./Central Govt./M.E.S./Railways or other Govt. undertakings.

Show 5 more

For TW projects, bidders must have a Truck mounted Mud Rotary Rig for Drilling of TWs or submit a joint venture agreement with a rig owner.
In joint ventures, the Civil Contractor must be the 1st Party with more than 51% share and be the prime contractor.
Contractors must not be defaulters.
SC/ST contractors with both Civil & Electrical Licenses are eligible for price preference.
P.A. holders of SC/ST bidders must belong to the SC/ST category.

Source: Original DTCNView source document

Experience

1 item

For TW packages, if participating through a joint venture with a rig owner, the rig owner must have experience in drilling works and the contractor must submit an experience certificate from an authority not less than the rank of Executive Officer of the rig holder.

Source: Original DTCNView source document

Financial

11 items

SC/ST contractors can avail EMD exemption by furnishing an affidavit stating they have not been awarded a minimum of 3 works during the current financial year.
The firm must possess liquid assets or credit facilities of not less than 20% of the amount put to tender.
EMD is 1% of the Estimated Cost, to be deposited online.

Show 8 more

EMD will be forfeited if a successful bidder fails to execute the agreement or furnish the required Performance Security within the specified time limit.
If any uploaded documents are found false/fabricated/bogus, the bidder will be blacklisted and EMD forfeited.
The Additional Performance Security (APS) will be calculated on an incremental basis where the accepted bid price is lower than the Cost Put to Tender, as per the specified rounding off percentage less (ROPL) and incremental rates.
APS shall be refunded immediately on successful completion of the work within 7 days of issuance of Completion Certificate/Provisional Completion Certificate.
The successful tenderer must execute an agreement in P.W.D. F2 Contract form within 7 days after receipt of the Letter of Intimation, with a deposit of ISD Value of 1% in the specified form.
Non-entering into agreement shall lead to forfeiture of Earnest Money.
Security deposit @ 5% of the bill will be deducted and refunded after 18 months from the date of handing over, subject to final bill payment.
If the contractor fails to rectify defects, the Lift Irrigation Department may engage another contractor and deduct the cost from the security deposit.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

34 items

Weightage may be given to contractors having their own plants and machinery (Rig & Ancillaries).
Contractor shall employ Engineers/Technical staff as per Govt. of Odisha norms.
The work involves drilling, installation, and energisation of Lift Irrigation Projects on a Turnkey basis.

Show 31 more

The scope includes erection of 11KV Line, L.T Line & Commissioning of Electrical Substation for power supply to L.I Projects along with installation of Pump Set, Starter and its energisation.
For TW projects, a truck-mounted Mud Rotary Rig for drilling is required.
The size of conductor for 11 KV line is 55/80 mm2 A.A.A.C. as per TPNODL Estimate, with a span length of 0.07 km.
The materials for 1 km of L.T. line with A.B. conductor of 34 mm2 and AAA conductor of 34 mm2 are specified, with a span length of 0.03 km.
Sub-stations will be 11/0.4 KV, ranging from 25 KVA to 100 KVA.
The contractor must submit test certificates for transformers issued by the manufacturer.
All transformers shall be subjected to routine tests at the manufacturer's work as per IS-2026/1977 or its latest amendment.
Transformer oil characteristics must meet specified standards (e.g., density, viscosity, flash point, breakdown voltage).
Lightening arresters must be Metal oxide gapless distribution type, meeting REC Specification No. F-9.
Materials for cut points, guarding, and line D.P. for 3 phase 11 KV overhead lines are specified.
UPVC Pipe, HDPE Pipe, and other EPM rate contract items must be procured from EPM registered firms of Govt. of Odisha with Pre & Post inspection Certificates from CIPET authority.
Materials supplied by the contractor must conform to the latest ISI/CPRI specifications, or specifications made by the Executive Engineer.
Bricks used must be well burnt, of good quality, approved by the site Engineer, and confirm to the minimum strength as per National Building Code.
The contractor must arrange necessary tools and plants, Rig & Machineries for efficient execution of works at their own cost.
The contractor is responsible for testing charges of materials, including collection and transportation of samples.
The contractor must provide adequate protection measures for completed works and works in progress against damages until handing over.
Dewatering from foundations during execution is the contractor's responsibility with no extra payment.
The contractor must arrange for water supply for all works, curing of masonry works, and sanitary arrangements for labor camps.
The contractor must arrange adequate lighting for night works at their own cost.
The contractor must ensure all materials supplied are procured from firms in Odisha and approved by the Engineer-in-charge.
The contractor must submit samples of stone, metal, chips, sand, cement, etc., for testing and acceptance before procurement.
Mechanical, electro-mechanical, and electrical materials are to be inspected at the principal manufacturer's site before dispatch, with expenditure borne by the contractor.
The contractor must provide footwear for labor doing cement mixing and blacktopping work.
The contractor must provide first aid appliances at every workplace, and at large workplaces, first aid posts run by trained compounders.
At large workplaces remote from hospitals, an indoor ward with one bed per 250 employees is required.
Adequate drinking water, washing, and bathing facilities (separate for men and women) must be provided.
Latrines and urinals must be provided as per specified scales, with separate facilities for women.
Proper disposal of excreta by incineration or other approved methods must be arranged.
Suitable sheds for rest (separate for males and females) must be provided.
At workplaces with more than 50 women workers, a crèche with attendants must be provided.
A cooked food canteen should be provided for workers if expedient.

Source: Original DTCNView source document

Contract conditions

27 items

The tender closing date is Dt. 03.11.26 up to 5:00 P.M.
The bid opening date is Dt. 04.11.26 at 11:00 A.M.
The validity of the offer is 180 days.

Show 24 more

The completion period for each work is 90 days from the date of issue of the work order.
Online bidding only is permitted; off-line bids/hard copy tenders will not be accepted.
All taxes, cess, royalties, income taxes, and surcharges (except GST) are to be borne by the bidder; GST will be paid extra.
Conditional tenders or tenders with extraneous conditions will be rejected.
Successful bidders must register under the state PWD before signing the agreement if registered under other State Govt./M.E.S./Railways/CPWD.
If a bidder makes a Joint Venture with more than one bidder in a single package using the same vehicle registration number, all bids related to that vehicle registration number will be rejected for the same package.
The cost of the Stamp paper for the agreement will be borne by the Tenderer.
The work order may be placed to other participants if the approved tenderer fails to execute the agreement or work within the stipulated time.
The contractor will be liable for a compensation of 0.5% of the estimated cost for every week the work remains uncommenced or unfinished after the proper dates, up to a maximum of 10% of the estimated cost.
If the contractor fails to meet progress milestones (1/4th work by 1/4th time, 1/2 work by 1/2 time, 3/4th work by 3/4th time), they will pay 0.3% of the estimated cost for every week the due quantity remains incomplete.
The contract work should not be sublet to anybody without written approval; otherwise, the contract may be rescinded.
The authority reserves the right to increase or decrease the quantity of items of work; no compensation will be given for this, only extension of time if necessary.
The work may be split and distributed among several contractors; no compensation will be given.
The contractor must produce a valid labor license from the licensing authority of the labor department before signing the agreement or within 7 days of the work order for newly awarded contractors.
The contractor is liable to indemnify the Department for any compensation under the Workmen's Compensation Act VII of 1993.
The contractor must abide by fair wages clauses and not pay less than the fair wages fixed by the Government.
No compensation will be paid for damage done by rain, flood, cyclone, earthquake, or other natural calamities.
No claim for idle labor/machinery/equipment will be entertained.
Interest is not chargeable for dues or additional dues payable for the work.
Any defect occurring within 18 months of commissioning of the project must be rectified by the contractor within 7 days.
Payment will be made after completion of work, handing over of electric line and substation to TPNODL, and completion of all formalities with TPNODL.
The works bill will be paid after a resolution is received from the Pani Panchayat members confirming successful completion and trial run, and project takeover.
The contractor must not employ child labor.
If the contractor quotes abnormally low rates for some items, the Corporation may withhold the differential cost between such low rates and schedule rates from other payments until those items are completed.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Bill of quantities

54 priced items · ₹25.56 L (₹25,55,900)

Download BOQ file

Major components

Share of BOQ amount, grouped by item description

Plumbing & water supply47%₹12.14 L
Electrical26%₹6.52 L
Earthwork & excavation12%₹2.96 L
Concrete & RCC8%₹2.01 L
Masonry5%₹1.25 L
Reinforcement steel2%₹53.4K

Largest items

By amount

Cost, Supplying of ISI marked 160 mm dia High Density Polythelene (HDPE) Pipes PE 80-PN 4 for water supply as…Item 1.22 · 1,010 Mtr₹5.49 L
Construction of 3 phase 11 KV HT line as per REC standard confirming to IE Rules 1956 with 300 kg 9 M long PS…Item 2.01 · 0.8 Km.₹4.17 L
Fitting and Fixing 160 mm dia High Density Polythelene (HDPE) Pipes PE 80-PN 4 Pipe including jointing the pi…Item 1.23 · 1,010 Mtr₹3.47 L
Cost, Supplying of ISI marked 200 mm dia High Density Polythelene (HDPE) Pipes PE 80-PN 4 for water supply as…Item 1.2 · 200 Mtr₹1.68 L
Online DP With AB SwitchItem 2.05 · 1 No₹1.24 L

Tender details

Tender reference: OLIC_02_26_27
Tender ID: 2026_OLIC_144327_82
District: Jajpur
Location: Jajpur Road
Tender type: Open Tender
Tender category: Works

Show all 8 fields

Product category: Civil Works - Lift Irrigation Schemes
Pincode: 755019

Authority

State
Government of Odisha
Department
Orissa Lift Irrigation Corporation
Organisation
LI,Central Circle, Cuttack
Office
LI Division Jajpur Road
Inviting authority
Executive Engineer L.I.DIvision, Jajpur Road

All Orissa Lift Irrigation Corporation tenders in Jajpur →

Costs

Estimated value: ₹25,99,706; ₹26.00 lakh
EMD / bid security: ₹25,997; Exemption available for eligible bidders
Tender fee: ₹7,080; Cost of bid document

Bid validity: 90 days

Security & deductions from the DTCN (9)

SC/ST contractors can avail EMD exemption by furnishing an affidavit stating they have not been awarded a minimum of 3 works during the current financial year.
EMD is 1% of the Estimated Cost, to be deposited online.
EMD will be forfeited if a successful bidder fails to execute the agreement or furnish the required Performance Security within the specified time limit.
If any uploaded documents are found false/fabricated/bogus, the bidder will be blacklisted and EMD forfeited.
The Additional Performance Security (APS) will be calculated on an incremental basis where the accepted bid price is lower than the Cost Put to Tender, as per the specified rounding off percentage less (ROPL) and incremental rates.
APS shall be refunded immediately on successful completion of the work within 7 days of issuance of Completion Certificate/Provisional Completion Certificate.
The successful tenderer must execute an agreement in P.W.D. F2 Contract form within 7 days after receipt of the Letter of Intimation, with a deposit of ISD Value of 1% in the specified form.
Security deposit @ 5% of the bill will be deducted and refunded after 18 months from the date of handing over, subject to final bill payment.
If the contractor fails to rectify defects, the Lift Irrigation Department may engage another contractor and deduct the cost from the security deposit.

Source: Original DTCN

Frequently asked questions

Eligibility & bid requirements

DTCN analysed81 requirements extracted21 documents identifiedExtracted from the official tender document

Eligibility

8 items

Reputed Contractors/Firms with valid PWD License of required class for Civil Works.
Contractors must have a valid HT License issued by ELBO.
Contractors must be registered with the State Govt. of Odisha or equivalent grade/class registered with other State Govt./Central Govt./M.E.S./Railways or other Govt. undertakings.

Show 5 more

For TW projects, bidders must have a Truck mounted Mud Rotary Rig for Drilling of TWs or submit a joint venture agreement with a rig owner.
In joint ventures, the Civil Contractor must be the 1st Party with more than 51% share and be the prime contractor.
Contractors must not be defaulters.
SC/ST contractors with both Civil & Electrical Licenses are eligible for price preference.
P.A. holders of SC/ST bidders must belong to the SC/ST category.

Source: Original DTCNView source document

Experience

1 item

For TW packages, if participating through a joint venture with a rig owner, the rig owner must have experience in drilling works and the contractor must submit an experience certificate from an authority not less than the rank of Executive Officer of the rig holder.

Source: Original DTCNView source document

Financial

11 items

SC/ST contractors can avail EMD exemption by furnishing an affidavit stating they have not been awarded a minimum of 3 works during the current financial year.
The firm must possess liquid assets or credit facilities of not less than 20% of the amount put to tender.
EMD is 1% of the Estimated Cost, to be deposited online.

Show 8 more

EMD will be forfeited if a successful bidder fails to execute the agreement or furnish the required Performance Security within the specified time limit.
If any uploaded documents are found false/fabricated/bogus, the bidder will be blacklisted and EMD forfeited.
The Additional Performance Security (APS) will be calculated on an incremental basis where the accepted bid price is lower than the Cost Put to Tender, as per the specified rounding off percentage less (ROPL) and incremental rates.
APS shall be refunded immediately on successful completion of the work within 7 days of issuance of Completion Certificate/Provisional Completion Certificate.
The successful tenderer must execute an agreement in P.W.D. F2 Contract form within 7 days after receipt of the Letter of Intimation, with a deposit of ISD Value of 1% in the specified form.
Non-entering into agreement shall lead to forfeiture of Earnest Money.
Security deposit @ 5% of the bill will be deducted and refunded after 18 months from the date of handing over, subject to final bill payment.
If the contractor fails to rectify defects, the Lift Irrigation Department may engage another contractor and deduct the cost from the security deposit.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

34 items

Weightage may be given to contractors having their own plants and machinery (Rig & Ancillaries).
Contractor shall employ Engineers/Technical staff as per Govt. of Odisha norms.
The work involves drilling, installation, and energisation of Lift Irrigation Projects on a Turnkey basis.

Show 31 more

The scope includes erection of 11KV Line, L.T Line & Commissioning of Electrical Substation for power supply to L.I Projects along with installation of Pump Set, Starter and its energisation.
For TW projects, a truck-mounted Mud Rotary Rig for drilling is required.
The size of conductor for 11 KV line is 55/80 mm2 A.A.A.C. as per TPNODL Estimate, with a span length of 0.07 km.
The materials for 1 km of L.T. line with A.B. conductor of 34 mm2 and AAA conductor of 34 mm2 are specified, with a span length of 0.03 km.
Sub-stations will be 11/0.4 KV, ranging from 25 KVA to 100 KVA.
The contractor must submit test certificates for transformers issued by the manufacturer.
All transformers shall be subjected to routine tests at the manufacturer's work as per IS-2026/1977 or its latest amendment.
Transformer oil characteristics must meet specified standards (e.g., density, viscosity, flash point, breakdown voltage).
Lightening arresters must be Metal oxide gapless distribution type, meeting REC Specification No. F-9.
Materials for cut points, guarding, and line D.P. for 3 phase 11 KV overhead lines are specified.
UPVC Pipe, HDPE Pipe, and other EPM rate contract items must be procured from EPM registered firms of Govt. of Odisha with Pre & Post inspection Certificates from CIPET authority.
Materials supplied by the contractor must conform to the latest ISI/CPRI specifications, or specifications made by the Executive Engineer.
Bricks used must be well burnt, of good quality, approved by the site Engineer, and confirm to the minimum strength as per National Building Code.
The contractor must arrange necessary tools and plants, Rig & Machineries for efficient execution of works at their own cost.
The contractor is responsible for testing charges of materials, including collection and transportation of samples.
The contractor must provide adequate protection measures for completed works and works in progress against damages until handing over.
Dewatering from foundations during execution is the contractor's responsibility with no extra payment.
The contractor must arrange for water supply for all works, curing of masonry works, and sanitary arrangements for labor camps.
The contractor must arrange adequate lighting for night works at their own cost.
The contractor must ensure all materials supplied are procured from firms in Odisha and approved by the Engineer-in-charge.
The contractor must submit samples of stone, metal, chips, sand, cement, etc., for testing and acceptance before procurement.
Mechanical, electro-mechanical, and electrical materials are to be inspected at the principal manufacturer's site before dispatch, with expenditure borne by the contractor.
The contractor must provide footwear for labor doing cement mixing and blacktopping work.
The contractor must provide first aid appliances at every workplace, and at large workplaces, first aid posts run by trained compounders.
At large workplaces remote from hospitals, an indoor ward with one bed per 250 employees is required.
Adequate drinking water, washing, and bathing facilities (separate for men and women) must be provided.
Latrines and urinals must be provided as per specified scales, with separate facilities for women.
Proper disposal of excreta by incineration or other approved methods must be arranged.
Suitable sheds for rest (separate for males and females) must be provided.
At workplaces with more than 50 women workers, a crèche with attendants must be provided.
A cooked food canteen should be provided for workers if expedient.

Source: Original DTCNView source document

Contract conditions

27 items

The tender closing date is Dt. 03.11.26 up to 5:00 P.M.
The bid opening date is Dt. 04.11.26 at 11:00 A.M.
The validity of the offer is 180 days.

Show 24 more

The completion period for each work is 90 days from the date of issue of the work order.
Online bidding only is permitted; off-line bids/hard copy tenders will not be accepted.
All taxes, cess, royalties, income taxes, and surcharges (except GST) are to be borne by the bidder; GST will be paid extra.
Conditional tenders or tenders with extraneous conditions will be rejected.
Successful bidders must register under the state PWD before signing the agreement if registered under other State Govt./M.E.S./Railways/CPWD.
If a bidder makes a Joint Venture with more than one bidder in a single package using the same vehicle registration number, all bids related to that vehicle registration number will be rejected for the same package.
The cost of the Stamp paper for the agreement will be borne by the Tenderer.
The work order may be placed to other participants if the approved tenderer fails to execute the agreement or work within the stipulated time.
The contractor will be liable for a compensation of 0.5% of the estimated cost for every week the work remains uncommenced or unfinished after the proper dates, up to a maximum of 10% of the estimated cost.
If the contractor fails to meet progress milestones (1/4th work by 1/4th time, 1/2 work by 1/2 time, 3/4th work by 3/4th time), they will pay 0.3% of the estimated cost for every week the due quantity remains incomplete.
The contract work should not be sublet to anybody without written approval; otherwise, the contract may be rescinded.
The authority reserves the right to increase or decrease the quantity of items of work; no compensation will be given for this, only extension of time if necessary.
The work may be split and distributed among several contractors; no compensation will be given.
The contractor must produce a valid labor license from the licensing authority of the labor department before signing the agreement or within 7 days of the work order for newly awarded contractors.
The contractor is liable to indemnify the Department for any compensation under the Workmen's Compensation Act VII of 1993.
The contractor must abide by fair wages clauses and not pay less than the fair wages fixed by the Government.
No compensation will be paid for damage done by rain, flood, cyclone, earthquake, or other natural calamities.
No claim for idle labor/machinery/equipment will be entertained.
Interest is not chargeable for dues or additional dues payable for the work.
Any defect occurring within 18 months of commissioning of the project must be rectified by the contractor within 7 days.
Payment will be made after completion of work, handing over of electric line and substation to TPNODL, and completion of all formalities with TPNODL.
The works bill will be paid after a resolution is received from the Pani Panchayat members confirming successful completion and trial run, and project takeover.
The contractor must not employ child labor.
If the contractor quotes abnormally low rates for some items, the Corporation may withhold the differential cost between such low rates and schedule rates from other payments until those items are completed.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Costs

Estimated value

₹25,99,706

₹26.00 lakh

EMD / bid security

₹25,997

Exemption available for eligible bidders

Tender fee

₹7,080

Cost of bid document

Bid validity: 90 days

Security & deductions from the DTCN (9)

SC/ST contractors can avail EMD exemption by furnishing an affidavit stating they have not been awarded a minimum of 3 works during the current financial year.
EMD is 1% of the Estimated Cost, to be deposited online.
EMD will be forfeited if a successful bidder fails to execute the agreement or furnish the required Performance Security within the specified time limit.
If any uploaded documents are found false/fabricated/bogus, the bidder will be blacklisted and EMD forfeited.
The Additional Performance Security (APS) will be calculated on an incremental basis where the accepted bid price is lower than the Cost Put to Tender, as per the specified rounding off percentage less (ROPL) and incremental rates.
APS shall be refunded immediately on successful completion of the work within 7 days of issuance of Completion Certificate/Provisional Completion Certificate.
The successful tenderer must execute an agreement in P.W.D. F2 Contract form within 7 days after receipt of the Letter of Intimation, with a deposit of ISD Value of 1% in the specified form.
Security deposit @ 5% of the bill will be deducted and refunded after 18 months from the date of handing over, subject to final bill payment.
If the contractor fails to rectify defects, the Lift Irrigation Department may engage another contractor and deduct the cost from the security deposit.

Source: Original DTCN

Frequently asked questions

PKG76

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

PKG76

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more