What is the last date to bid for this tender?

Bids must be submitted on the Odisha eProcurement portal (tendersodisha.gov.in) by 06 Nov 2026, 05:00 PM. Bids are scheduled to open on 07 Nov 2026, 11:00 AM.

What is the estimated value of this tender?

The estimated tender value is ₹26.23 L (₹26,22,692).

How much EMD is required?

The EMD (bid security) is ₹26.2K (₹26,227). The portal lists EMD exemption as available for eligible bidders — check the DTCN for who qualifies.

Who can bid for this tender?

The DTCN states: Reputed Contractors/Firms with valid PWD License of required class for Civil Works; Contractors must have a Truck mounted Mud Rotary Rig for Drilling of TWs, or a Joint Venture Agreement with a rig owner for drilling convenience (for TW projects).

What work experience is required?

As extracted from the DTCN: For TW projects, bidders without their own rig must submit a joint venture agreement with a rig owner, executed in the court of a First Class Magistrate/Executive Magistrate; Bidders should have executed similar type of work in the last five years (weightage given).

Which department issued this tender?

This tender was issued by Orissa Lift Irrigation Corporation, LI,Central Circle, Cuttack, LI Division Jajpur Road; the tender inviting authority is the Executive Engineer L.I.DIvision, Jajpur Road.

What documents are required to submit a bid?

The DTCN lists 22 documents, including PWD License, HT License, Rig Owner's Experience Certificates (for * TW projects), Rig RC Book (for * TW projects), Rig Fitness Certificate (for * TW projects), Rig Permit (for * TW projects), and 16 more.

OtherLive

PKG75

Jajpur Road, Jajpur Orissa Lift Irrigation CorporationLI Division Jajpur Road

Tender ID 2026_OLIC_144327_81Ref OLIC_02_26_27

Estimated value: ₹26.23 L
EMD: ₹26.2K; Exemption available
Tender fee: ₹7.1K
Work period: —

Closing in

4 days left

06 Nov 2026, 05:00 PM

About this tender

Orissa Lift Irrigation Corporation has invited bids for “PKG75” in Jajpur Road, Jajpur district, Odisha. The estimated tender value is ₹26.23 lakh. Bids must be submitted by 06 Nov 2026, 05:00 PM.

Bid readiness

Based on the tender, not your profile

Done: Tender is currently open
Done: BOQ available · 59 items
Done: DTCN analysed · 81 requirements extracted
Done: 22 required documents identified
Needs review: Experience requirement needs review
Needs review: Financial requirements need review

Review requirements

Important dates

All times IST, as published on the portal

Published30 Oct 2026, 02:00 PM
Document downloadUntil 06 Nov 2026
Submission deadline· 4 days left06 Nov 2026, 05:00 PM
Bid opening07 Nov 2026, 11:00 AM

Tender intelligence

Eligibility & bid requirements

DTCN analysed81 requirements extracted22 documents identifiedExtracted from the official tender document

This tender from the Odisha Lift Irrigation Corporation Limited invites bids for the drilling, installation, and energization of 76 Lift Irrigation Projects in Jajpur District. The work involves civil construction, drilling of tube wells, erection of 11KV and LT lines, and commissioning of electrical substations on a turnkey basis. Estimated costs range from Rs. 24.60 Lakh to Rs. 29.51 Lakh per package, with a completion period of 90 days for each. Contractors must possess valid PWD and HT licenses and, for certain packages, have access to a truck-mounted mud rotary rig.

Eligibility

10 items

Reputed Contractors/Firms with valid PWD License of required class for Civil Works.
Contractors must have a Truck mounted Mud Rotary Rig for Drilling of TWs, or a Joint Venture Agreement with a rig owner for drilling convenience (for TW projects).
Contractors must have a Registered HT License issued by ELBO.

Show 7 more

Registered with the State Govt. of Odisha or equivalent grade/class registered with other State Govt./Central Govt./M.E.S./Railways or other Govt. undertakings.
Registered in the State portal and possessing compatible digital signature certificate for online bidding.
SC/ST contractors with both Civil & Electrical Licenses are eligible for price preference.
In joint ventures, the Civil Contractor must be the 1st Party with more than 51% share and be the prime contractor.
Defaulter contractors are not allowed to participate.
The P.A. holders of any SC/ST bidders should belong to the SC/ST category only.
SC/ST individual registered contractors up to "B" Class are eligible for concessions/facilities (no preference for Joint Venture).

Source: Original DTCNView source document

Experience

3 items

For TW projects, bidders without their own rig must submit a joint venture agreement with a rig owner, executed in the court of a First Class Magistrate/Executive Magistrate.
Bidders should have executed similar type of work in the last five years (weightage given).
For TW packages, experience Rig holders must participate in Joint Venture Agreement with the required class of contractor, submitting an Experience certificate from an Authority not less than the Rank of Executive Officer of the RIG holder.

Source: Original DTCNView source document

Financial

15 items

For EMD exemption, the intending Engineering Contractor must furnish an affidavit stating they have not been awarded a minimum of 3 works during the current financial year.
The firm must possess liquid assets or credit facilities of not less than 20% of the amount put to tender, with the bill against the specific work mentioning the name of work and tender identification No.
EMD is 1% of the Estimated Cost, to be deposited online.

Show 12 more

EMD will be forfeited if the successful bidder fails to execute the agreement or furnish the required Performance Security within the specified time limit.
If any submitted documents are found false/fabricated/bogus, the bidder will be blacklisted and EMD forfeited.
Additional Performance Security (APS) will be obtained on an incremental basis if the accepted bid price is lower than the Cost Put to Tender, calculated based on the Rounding Off of Percentage Less (ROPL).
APS is not required if the ROPL is up to (-)10%.
APS calculation varies for ROPL below (-)10%, (-)20%, and (-)30% or more, with incremental percentages of the accepted bid price.
The additional performance security shall be treated as part of the performance security.
The provision of additional performance security is applicable to all forms of tender except Turnkey Tender.
Additional Performance Security (APS) shall be refunded immediately on successful completion of the work within 7 days of issuance of Completion Certificate/Provisional Completion Certificate.
The successful Tenderer must execute an agreement in P.W.D. F2 Contract form within 7 days after receipt of Letter of Intimation, with a deposit of ISD Value of 1% in specified forms.
Non-entering into agreement shall lead to forfeiture of Earnest Money.
The EMD will be dealt with as per the terms and conditions of OPWD code.
Security deposit @ 5% of the bill will be deducted and refunded after 18 months from the date of handing over, subject to final bill payment.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

16 items

Contractor shall employ Engineers/Tech. staffs as per norms of the Govt. of Odisha.
Possession of a Truck mounted Mud Rotary Rig for Drilling of TWs (or JV with rig owner).
Erection of 11KV Line, L.T Line & Commissioning of Electrical Substation for power supply to L.I Projects.

Show 13 more

Installation of Pump Set, Starter and its energisation.
For 11 KV line erection, the size of conductor to be used is 55/80 mm2 A.A.A.C. as per TPNODL Estimate, with a span length of 0.07 km (variable).
For L.T. line erection, materials for 1 km of L.T. line with A.B. conductor of 34 mm2 and AAA conductor of 34 mm2 are specified, with a span length of 0.03 km (variable).
Sub-stations will be 11/0.4 KV, ranging from 25 KVA to 100 KVA.
Contractor must submit test certificates of transformers issued by the manufacturer.
All transformers shall be subjected to routine tests at the manufacturer's work as per IS-2026/1977 or its latest amendment.
Transformer oil characteristics must meet specified standards (e.g., density, viscosity, flash point, breakdown voltage).
Lightening arresters must be Metal oxide gapless distribution type, meeting REC Specification No. F-9.
Materials for cut points, guarding, and line D.P. for 11 KV overhead lines are specified.
The work must be executed as per the technical specification as directed by the Engineer-in-charge.
Purchase of UPVC Pipe, HDPE Pipe, and other EPM rate contract items must be from EPM registered firms of Govt. of Odisha with Pre & Post inspection Certificates from CIPET authority.
Materials supplied must conform to the latest ISI / CPRI specifications, or specifications made by the Executive Engineer.
Bricks used must be well burnt, of good quality, approved by the site Engineer, and confirm to the minimum strength as per National Building Code.

Source: Original DTCNView source document

Contract conditions

37 items

The completion period for each L.I Project is 90 days from the date of issue of the work order.
Tenders will remain valid for 180 days from the date of opening of the Financial Bids.
The successful bidder must register under the state PWD before signing the agreement if registered under other State Govt./M.E.S./Railways/CPWD.

Show 34 more

In case of failure of drilling work at site, the failed bore hole, mud pits, and channel lines must be refilled with sand & extracted earth immediately.
If multiple bids are lowest, a transparent lottery system will be used to finalize the tender.
If SC/ST contractors' rates match the lowest bidder after 10% price preference, a lottery system will be used.
The cost of the Stamp paper for the agreement will be borne by the Tenderer.
The work order may be placed to other participants if the approved Tenderer fails to execute the agreement or work within the stipulated time.
The contractor is responsible for payment of all royalties and local taxes, including Octroi Charges, Ferry & Tollage charges.
No materials will be supplied to the Contractor from the Corporation Store unless under special circumstances.
The contractor is fully liable to indemnify the Corporation for any compensation under the Workmen’s Compensation Act.
The contractor must make arrangements for proper storage of materials at his own cost.
The Corporation is not responsible for theft of materials at site.
The contract work should not be sublet to anybody without written permission; otherwise, the contract may be rescinded.
The authority reserves the right to increase or decrease the quantity of items of works, and the contractor is not entitled to compensation except for extension of time.
The work may be split and distributed among several contractors, and the contractor is not entitled to compensation.
The contractor must produce a valid labor license from the licensing authority of the labor Department before signing the agreement or within 7 days of the work order for newly awarded contractors.
The contractor must abide by fair wages clauses and not pay less than the fair wages fixed by the Govt. to laborers.
No compensation will be paid for any damage done by natural calamities during execution or up to 18 months after completion of works.
No claim for idle labor/machinery/equipment will be entertained.
All taxes, cess, royalties, income taxes, and surcharges will be borne by the bidder, except GST which will be paid extra.
The quoted rates shall be inclusive of all such elements except GST.
Conditional tenders will not be considered and are liable for rejection.
The contractor must submit a work plan and monthly works programme for approval.
The contractor must arrange necessary tools and plants required for efficient execution at his own cost.
Interest is not chargeable for dues or additional dues.
The contractor must provide adequate protection measures to completed works and works in progress at his own cost.
Dewatering from the foundation of structures will be done by the contractor at no extra cost.
Quantities for items with quoted rates more than 25% of estimated rates are not allowed to be varied by more than 5% without competent authority approval.
In case of discrepancy, conditions in F2 form shall prevail over the Detailed Tender Call Notice.
Payment will be made after successful completion of work, testing, commissioning, and handing over to the concerned Pani Panchayat.
Any defect occurring within 18 months of commissioning must be rectified by the Contractor within 7 days.
The Tenderer shall put his signature on each page of the tender paper.
Damages caused to any Govt. property/private property during pipeline work will be compensated by the contractor at his own risk and cost.
The contractor must supply samples of all materials for testing and acceptance.
If the contractor quotes abnormally low rates for some items, the Corporation may withhold the differential cost from other payments until such items are completed.
The contractor shall not employ any child labor.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Bill of quantities

59 priced items · ₹25.75 L (₹25,75,299)

Download BOQ file

Major components

Share of BOQ amount, grouped by item description

Plumbing & water supply43%₹11.04 L
Electrical27%₹6.86 L
Earthwork & excavation22%₹5.76 L
Concrete & RCC4%₹90.9K
Masonry3%₹88.8K
Reinforcement steel1%₹15.8K

Largest items

By amount

Construction of 3 phase 11 KV HT line as per REC standard confirming to IE Rules 1956 with 300 kg 9 M long PS…Item 2.01 · 0.8 Km.₹4.17 L
Construction and erection of 11 /0.4 KV , 25 KVA Double Pole mounted Substation with 5mtrx3mtrx1.5mtr height…Item 2.02 · 1 No₹4.06 L
Cost, Supplying of ISI marked 160 mm dia High Density Polythelene (HDPE) Pipes PE 80-PN 4 for water supply as…Item 1.2 · 482 Mtr₹2.62 L
From 0 mtr. to 100th metersItem 3.03 · 90 Per mtr.₹1.90 L
Fitting and Fixing 160 mm dia High Density Polythelene (HDPE) Pipes PE 80-PN 4 Pipe including jointing the pi…Item 1.21 · 482 Mtr₹1.66 L

Tender details

Tender reference: OLIC_02_26_27
Tender ID: 2026_OLIC_144327_81
District: Jajpur
Location: Jajpur Road
Tender type: Open Tender
Tender category: Works

Show all 8 fields

Product category: Civil Works - Lift Irrigation Schemes
Pincode: 755019

Authority

State
Government of Odisha
Department
Orissa Lift Irrigation Corporation
Organisation
LI,Central Circle, Cuttack
Office
LI Division Jajpur Road
Inviting authority
Executive Engineer L.I.DIvision, Jajpur Road

All Orissa Lift Irrigation Corporation tenders in Jajpur →

Costs

Estimated value: ₹26,22,692; ₹26.23 lakh
EMD / bid security: ₹26,227; Exemption available for eligible bidders
Tender fee: ₹7,080; Cost of bid document

Bid validity: 90 days

Security & deductions from the DTCN (13)

For EMD exemption, the intending Engineering Contractor must furnish an affidavit stating they have not been awarded a minimum of 3 works during the current financial year.
EMD is 1% of the Estimated Cost, to be deposited online.
EMD will be forfeited if the successful bidder fails to execute the agreement or furnish the required Performance Security within the specified time limit.
If any submitted documents are found false/fabricated/bogus, the bidder will be blacklisted and EMD forfeited.
Additional Performance Security (APS) will be obtained on an incremental basis if the accepted bid price is lower than the Cost Put to Tender, calculated based on the Rounding Off of Percentage Less (ROPL).
APS is not required if the ROPL is up to (-)10%.
APS calculation varies for ROPL below (-)10%, (-)20%, and (-)30% or more, with incremental percentages of the accepted bid price.
The additional performance security shall be treated as part of the performance security.
The provision of additional performance security is applicable to all forms of tender except Turnkey Tender.
Additional Performance Security (APS) shall be refunded immediately on successful completion of the work within 7 days of issuance of Completion Certificate/Provisional Completion Certificate.
The successful Tenderer must execute an agreement in P.W.D. F2 Contract form within 7 days after receipt of Letter of Intimation, with a deposit of ISD Value of 1% in specified forms.
The EMD will be dealt with as per the terms and conditions of OPWD code.
Security deposit @ 5% of the bill will be deducted and refunded after 18 months from the date of handing over, subject to final bill payment.

Source: Original DTCN

Frequently asked questions

Eligibility & bid requirements

DTCN analysed81 requirements extracted22 documents identifiedExtracted from the official tender document

Eligibility

10 items

Reputed Contractors/Firms with valid PWD License of required class for Civil Works.
Contractors must have a Truck mounted Mud Rotary Rig for Drilling of TWs, or a Joint Venture Agreement with a rig owner for drilling convenience (for TW projects).
Contractors must have a Registered HT License issued by ELBO.

Show 7 more

Registered with the State Govt. of Odisha or equivalent grade/class registered with other State Govt./Central Govt./M.E.S./Railways or other Govt. undertakings.
Registered in the State portal and possessing compatible digital signature certificate for online bidding.
SC/ST contractors with both Civil & Electrical Licenses are eligible for price preference.
In joint ventures, the Civil Contractor must be the 1st Party with more than 51% share and be the prime contractor.
Defaulter contractors are not allowed to participate.
The P.A. holders of any SC/ST bidders should belong to the SC/ST category only.
SC/ST individual registered contractors up to "B" Class are eligible for concessions/facilities (no preference for Joint Venture).

Source: Original DTCNView source document

Experience

3 items

For TW projects, bidders without their own rig must submit a joint venture agreement with a rig owner, executed in the court of a First Class Magistrate/Executive Magistrate.
Bidders should have executed similar type of work in the last five years (weightage given).
For TW packages, experience Rig holders must participate in Joint Venture Agreement with the required class of contractor, submitting an Experience certificate from an Authority not less than the Rank of Executive Officer of the RIG holder.

Source: Original DTCNView source document

Financial

15 items

For EMD exemption, the intending Engineering Contractor must furnish an affidavit stating they have not been awarded a minimum of 3 works during the current financial year.
The firm must possess liquid assets or credit facilities of not less than 20% of the amount put to tender, with the bill against the specific work mentioning the name of work and tender identification No.
EMD is 1% of the Estimated Cost, to be deposited online.

Show 12 more

EMD will be forfeited if the successful bidder fails to execute the agreement or furnish the required Performance Security within the specified time limit.
If any submitted documents are found false/fabricated/bogus, the bidder will be blacklisted and EMD forfeited.
Additional Performance Security (APS) will be obtained on an incremental basis if the accepted bid price is lower than the Cost Put to Tender, calculated based on the Rounding Off of Percentage Less (ROPL).
APS is not required if the ROPL is up to (-)10%.
APS calculation varies for ROPL below (-)10%, (-)20%, and (-)30% or more, with incremental percentages of the accepted bid price.
The additional performance security shall be treated as part of the performance security.
The provision of additional performance security is applicable to all forms of tender except Turnkey Tender.
Additional Performance Security (APS) shall be refunded immediately on successful completion of the work within 7 days of issuance of Completion Certificate/Provisional Completion Certificate.
The successful Tenderer must execute an agreement in P.W.D. F2 Contract form within 7 days after receipt of Letter of Intimation, with a deposit of ISD Value of 1% in specified forms.
Non-entering into agreement shall lead to forfeiture of Earnest Money.
The EMD will be dealt with as per the terms and conditions of OPWD code.
Security deposit @ 5% of the bill will be deducted and refunded after 18 months from the date of handing over, subject to final bill payment.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

16 items

Contractor shall employ Engineers/Tech. staffs as per norms of the Govt. of Odisha.
Possession of a Truck mounted Mud Rotary Rig for Drilling of TWs (or JV with rig owner).
Erection of 11KV Line, L.T Line & Commissioning of Electrical Substation for power supply to L.I Projects.

Show 13 more

Installation of Pump Set, Starter and its energisation.
For 11 KV line erection, the size of conductor to be used is 55/80 mm2 A.A.A.C. as per TPNODL Estimate, with a span length of 0.07 km (variable).
For L.T. line erection, materials for 1 km of L.T. line with A.B. conductor of 34 mm2 and AAA conductor of 34 mm2 are specified, with a span length of 0.03 km (variable).
Sub-stations will be 11/0.4 KV, ranging from 25 KVA to 100 KVA.
Contractor must submit test certificates of transformers issued by the manufacturer.
All transformers shall be subjected to routine tests at the manufacturer's work as per IS-2026/1977 or its latest amendment.
Transformer oil characteristics must meet specified standards (e.g., density, viscosity, flash point, breakdown voltage).
Lightening arresters must be Metal oxide gapless distribution type, meeting REC Specification No. F-9.
Materials for cut points, guarding, and line D.P. for 11 KV overhead lines are specified.
The work must be executed as per the technical specification as directed by the Engineer-in-charge.
Purchase of UPVC Pipe, HDPE Pipe, and other EPM rate contract items must be from EPM registered firms of Govt. of Odisha with Pre & Post inspection Certificates from CIPET authority.
Materials supplied must conform to the latest ISI / CPRI specifications, or specifications made by the Executive Engineer.
Bricks used must be well burnt, of good quality, approved by the site Engineer, and confirm to the minimum strength as per National Building Code.

Source: Original DTCNView source document

Contract conditions

37 items

The completion period for each L.I Project is 90 days from the date of issue of the work order.
Tenders will remain valid for 180 days from the date of opening of the Financial Bids.
The successful bidder must register under the state PWD before signing the agreement if registered under other State Govt./M.E.S./Railways/CPWD.

Show 34 more

In case of failure of drilling work at site, the failed bore hole, mud pits, and channel lines must be refilled with sand & extracted earth immediately.
If multiple bids are lowest, a transparent lottery system will be used to finalize the tender.
If SC/ST contractors' rates match the lowest bidder after 10% price preference, a lottery system will be used.
The cost of the Stamp paper for the agreement will be borne by the Tenderer.
The work order may be placed to other participants if the approved Tenderer fails to execute the agreement or work within the stipulated time.
The contractor is responsible for payment of all royalties and local taxes, including Octroi Charges, Ferry & Tollage charges.
No materials will be supplied to the Contractor from the Corporation Store unless under special circumstances.
The contractor is fully liable to indemnify the Corporation for any compensation under the Workmen’s Compensation Act.
The contractor must make arrangements for proper storage of materials at his own cost.
The Corporation is not responsible for theft of materials at site.
The contract work should not be sublet to anybody without written permission; otherwise, the contract may be rescinded.
The authority reserves the right to increase or decrease the quantity of items of works, and the contractor is not entitled to compensation except for extension of time.
The work may be split and distributed among several contractors, and the contractor is not entitled to compensation.
The contractor must produce a valid labor license from the licensing authority of the labor Department before signing the agreement or within 7 days of the work order for newly awarded contractors.
The contractor must abide by fair wages clauses and not pay less than the fair wages fixed by the Govt. to laborers.
No compensation will be paid for any damage done by natural calamities during execution or up to 18 months after completion of works.
No claim for idle labor/machinery/equipment will be entertained.
All taxes, cess, royalties, income taxes, and surcharges will be borne by the bidder, except GST which will be paid extra.
The quoted rates shall be inclusive of all such elements except GST.
Conditional tenders will not be considered and are liable for rejection.
The contractor must submit a work plan and monthly works programme for approval.
The contractor must arrange necessary tools and plants required for efficient execution at his own cost.
Interest is not chargeable for dues or additional dues.
The contractor must provide adequate protection measures to completed works and works in progress at his own cost.
Dewatering from the foundation of structures will be done by the contractor at no extra cost.
Quantities for items with quoted rates more than 25% of estimated rates are not allowed to be varied by more than 5% without competent authority approval.
In case of discrepancy, conditions in F2 form shall prevail over the Detailed Tender Call Notice.
Payment will be made after successful completion of work, testing, commissioning, and handing over to the concerned Pani Panchayat.
Any defect occurring within 18 months of commissioning must be rectified by the Contractor within 7 days.
The Tenderer shall put his signature on each page of the tender paper.
Damages caused to any Govt. property/private property during pipeline work will be compensated by the contractor at his own risk and cost.
The contractor must supply samples of all materials for testing and acceptance.
If the contractor quotes abnormally low rates for some items, the Corporation may withhold the differential cost from other payments until such items are completed.
The contractor shall not employ any child labor.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Costs

Estimated value

₹26,22,692

₹26.23 lakh

EMD / bid security

₹26,227

Exemption available for eligible bidders

Tender fee

₹7,080

Cost of bid document

Bid validity: 90 days

Security & deductions from the DTCN (13)

For EMD exemption, the intending Engineering Contractor must furnish an affidavit stating they have not been awarded a minimum of 3 works during the current financial year.
EMD is 1% of the Estimated Cost, to be deposited online.
EMD will be forfeited if the successful bidder fails to execute the agreement or furnish the required Performance Security within the specified time limit.
If any submitted documents are found false/fabricated/bogus, the bidder will be blacklisted and EMD forfeited.
Additional Performance Security (APS) will be obtained on an incremental basis if the accepted bid price is lower than the Cost Put to Tender, calculated based on the Rounding Off of Percentage Less (ROPL).
APS is not required if the ROPL is up to (-)10%.
APS calculation varies for ROPL below (-)10%, (-)20%, and (-)30% or more, with incremental percentages of the accepted bid price.
The additional performance security shall be treated as part of the performance security.
The provision of additional performance security is applicable to all forms of tender except Turnkey Tender.
Additional Performance Security (APS) shall be refunded immediately on successful completion of the work within 7 days of issuance of Completion Certificate/Provisional Completion Certificate.
The successful Tenderer must execute an agreement in P.W.D. F2 Contract form within 7 days after receipt of Letter of Intimation, with a deposit of ISD Value of 1% in specified forms.
The EMD will be dealt with as per the terms and conditions of OPWD code.
Security deposit @ 5% of the bill will be deducted and refunded after 18 months from the date of handing over, subject to final bill payment.

Source: Original DTCN

Frequently asked questions

PKG75

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

PKG75

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more