What is the last date to bid for this tender?

Bids must be submitted on the Odisha eProcurement portal (tendersodisha.gov.in) by 06 Nov 2026, 05:00 PM. Bids are scheduled to open on 07 Nov 2026, 11:00 AM.

What is the estimated value of this tender?

The estimated tender value is ₹29.26 L (₹29,26,152).

How much EMD is required?

The EMD (bid security) is ₹29.3K (₹29,262). The portal lists EMD exemption as available for eligible bidders — check the DTCN for who qualifies.

Who can bid for this tender?

The DTCN states: Contractors/Firms must have a valid PWD License of the required class for Civil Works; Contractors must have a valid HT License issued by ELBO.

What work experience is required?

As extracted from the DTCN: For TW projects, bidders without their own rig must submit a joint venture agreement with a rig owner, executed in the court of a First Class Magistrate/Executive Magistrate; Contractors should have executed similar type of work in the last five years.

Which department issued this tender?

This tender was issued by Orissa Lift Irrigation Corporation, LI,Central Circle, Cuttack, LI Division Jajpur Road; the tender inviting authority is the Executive Engineer L.I.DIvision, Jajpur Road.

What documents are required to submit a bid?

The DTCN lists 22 documents, including PWD License (Civil), HT License (Electrical), Rig Owner's Experience Certificates (for TW projects), Rig RC Book (for TW projects), Rig Fitness Certificate (for TW projects), Rig Permit (for TW projects), and 16 more.

OtherLive

PKG62

Jajpur Road, Jajpur Orissa Lift Irrigation CorporationLI Division Jajpur Road

Tender ID 2026_OLIC_144327_66Ref OLIC_02_26_27

Estimated value: ₹29.26 L
EMD: ₹29.3K; Exemption available
Tender fee: ₹7.1K
Work period: —

Closing in

4 days left

06 Nov 2026, 05:00 PM

About this tender

Orissa Lift Irrigation Corporation has invited bids for “PKG62” in Jajpur Road, Jajpur district, Odisha. The estimated tender value is ₹29.26 lakh. Bids must be submitted by 06 Nov 2026, 05:00 PM.

Bid readiness

Based on the tender, not your profile

Done: Tender is currently open
Done: BOQ available · 58 items
Done: DTCN analysed · 77 requirements extracted
Done: 22 required documents identified
Needs review: Experience requirement needs review
Needs review: Financial requirements need review

Review requirements

Important dates

All times IST, as published on the portal

Published30 Oct 2026, 12:00 PM
Document downloadUntil 06 Nov 2026
Submission deadline· 4 days left06 Nov 2026, 05:00 PM
Bid opening07 Nov 2026, 11:00 AM

Tender intelligence

Eligibility & bid requirements

DTCN analysed77 requirements extracted22 documents identifiedExtracted from the official tender document

This tender from the Odisha Lift Irrigation Corporation Ltd. invites bids for the drilling, installation, and energization of 76 Lift Irrigation Projects in Jajpur District. The work is on a turnkey basis, including civil works, drilling of tubewells, erection of 11KV and LT lines, and commissioning of electrical substations. Estimated costs range from Rs. 24.60 Lakh to Rs. 29.51 Lakh per package, with a completion period of 90 days for each. Contractors must possess valid PWD and HT licenses and have a truck-mounted mud rotary rig for drilling.

Eligibility

8 items

Contractors/Firms must have a valid PWD License of the required class for Civil Works.
Contractors must have a valid HT License issued by ELBO.
Contractors must possess a truck-mounted Mud Rotary Rig for Drilling of TWs.

Show 5 more

Contractors registered with other State Govt./M.E.S./Railways/CPWD in equivalent rank may participate, but successful bidders must register under Odisha PWD before signing the agreement.
For Joint Ventures, the Civil Contractor must be the 1st Party with more than 51% share and be the prime contractor.
Defaulter contractors are not allowed to participate.
SC/ST contractors with both Civil & Electrical Licenses are eligible for price preference, up to 'B' Class registration (no preference for Joint Ventures).
PA holders of SC/ST bidders must belong to the SC/ST category.

Source: Original DTCNView source document

Experience

3 items

For TW projects, bidders without their own rig must submit a joint venture agreement with a rig owner, executed in the court of a First Class Magistrate/Executive Magistrate.
Contractors should have executed similar type of work in the last five years.
For TW packages, experienced Rig holders must participate in Joint Venture Agreements with the required class of contractor, submitting experience certificates from an authority not less than the rank of an Executive Officer of the Rig holder.

Source: Original DTCNView source document

Financial

11 items

The firm must possess liquid assets or credit facilities of not less than 20% of the amount put to tender.
EMD is 1% of the Estimated Cost, to be deposited online.
The EMD will be forfeited if the successful bidder fails to execute the agreement or furnish the required Performance Security within the specified time.

Show 8 more

If any submitted documents are found false/fabricated/bogus, the bidder will be blacklisted and EMD forfeited.
Additional Performance Security (APS) will be calculated on an incremental basis if the accepted bid price is lower than the Cost Put to Tender, as per the specified ROPL percentages.
The APS shall be treated as part of the performance security.
The provision of APS is applicable to all forms of tender except Turnkey Tender.
The successful tenderer must execute an agreement in P.W.D. F2 Contract form within 7 days of receiving the Letter of Intimation, with an ISD Value of 1% pledged in favor of the Executive Engineer.
Non-entering into agreement will lead to forfeiture of Earnest Money.
Security deposit of 5% of the bill will be deducted and refunded after 18 months from the date of handing over, subject to final bill payment.
If the contractor fails to rectify defects, the department may engage another contractor and deduct costs from the security deposit.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

27 items

Contractors having their own plants and machineries (Rig & Ancillaries) will be given weightage.
The work involves drilling, installation, and energisation of Lift Irrigation Projects on a Turnkey basis.
The scope includes erection of 11KV Line, L.T Line, and commissioning of Electrical Substation.

Show 24 more

Installation of Pump Set, Starter, and its energisation is required.
For 11 KV line erection, the conductor size is 55/80 mm2 A.A.A.C. with a span length of 0.07 km.
For L.T. line erection, materials for 1 km of L.T. line with A.B. conductor of 34 mm2 and AAA conductor of 34 mm2 are specified, with a span length of 0.03 km.
Sub-stations will be 11/0.4 KV, ranging from 25 KVA to 100 KVA.
Transformers must undergo routine tests as per IS-2026/1977 or its latest amendment.
Transformer oil must meet specified characteristics for appearance, density, viscosity, flash point, pour point, neutralization value, electric strength, dielectric dissipation factor, specific resistance, oxidation stability, and water content.
Lightening arresters must be Metal oxide gapless distribution type, 12 KV rated voltage, 5 KA nominal discharge current, and meet other specified technical particulars.
Materials for one cut point for 3 phase 11 KV overload line, one guarding for 11 KV overload line, and one line D.P. for 3 phase 11 KV line are specified.
UPVC Pipe, HDPE Pipe, and other EPM rate contract items must be procured from EPM registered firms of Govt. of Odisha with Pre & Post inspection Certificates from CIPET authority.
Materials supplied must conform to the latest ISI/CPRI specifications, or specifications made by the Executive Engineer.
Bricks used must be well burnt, of good quality, approved by the site Engineer, and confirm to the minimum strength as per National Building Code.
Contractor must arrange necessary tools and plants, Rig & Machineries for efficient execution of works at their own cost.
Contractor must employ Engineers/Technical staff as per norms of the Govt. of Odisha.
Samples of stone, metal, chips, sand, cement, and all mechanical, electro-mechanical, and electrical materials must be deposited/inspected for testing and acceptance.
The contractor must provide adequate lighting arrangements for night works, fencing, barriers, and signals for public safety.
The contractor must arrange for water supply for all works and make sanitary arrangements for labour camps.
Dewatering from the foundation of structures must be done by the contractor at no extra cost.
The contractor must abide by the CPWD safety code rules.
The contractor must provide adequate protection measures to completed works and works in progress against damages until handing over.
In case of drilling work failure, the failed bore hole, mud pits, and channel lines must be refilled with sand and extracted earth immediately.
The contractor must arrange for all requisite equipment for testing after completion of work and bear the entire cost.
The contractor must inform the President/Secretary and Pani Panchayat members for commissioning and trial run of the project.
After completion, materials fitted at the project must be handed over to the Pani Panchayat President/Secretary.
Electrical works must be handed over to TPNODL for maintenance after completion.

Source: Original DTCNView source document

Contract conditions

28 items

The tender closing date is Dt. 03.11.26 up to 5:00 P.M.
The bid opening date is Dt. 04.11.26 at 11:00 A.M.
The validity of the offer is 180 days.

Show 25 more

Completion period for each work is 90 days from the date of issue of the work order.
A compensation of 0.5% on the estimated cost per week will be levied for uncommenced or unfinished work, not exceeding 10% of the estimated cost.
If the contractor fails to meet progress milestones (1/4th work by 1/4th time, 1/2 work by 1/2 time, 3/4th work by 3/4th time), a compensation of 0.33% on the estimated cost per week will be levied.
If multiple bids are lowest, a transparent lottery system will be used to finalize the tender.
SC/ST contractors receive a 10% price preference; if their rate matches the lowest bidder after preference, a lottery system will be used.
The cost of the Stamp paper for the agreement will be borne by the Tenderer.
The work order may be placed to other participants if the approved tenderer fails to execute the agreement or work within the stipulated time.
The Executive Engineer reserves the right to increase or decrease the quantity of work or reject any or all tenders without assigning reasons.
The contractor is responsible for payment of all royalties, local taxes, Octroi Charges, Ferry & Tollage charges.
No materials will be supplied by the Corporation unless under special circumstances.
The contractor is fully liable to indemnify the Corporation for any compensation under the Workmen's Compensation Act.
No claim for idle labour/machinery/equipment will be entertained.
No compensation will be paid for damages due to natural calamities.
Extra items of work or extra quantity will not be paid unless a written order is obtained and rates settled beforehand.
All taxes, cess, royalties, income taxes, and surcharges will be borne by the bidder, except GST which will be paid extra.
The quoted rates shall be inclusive of all elements except GST.
Conditional tenders or tenders with extraneous conditions are liable for rejection.
The contractor must abide by fair wages clauses and not pay less than the fair wages fixed by the Government.
The contractor must submit a monthly return of labour employed.
The contractor is responsible for any damage to Government or private property during pipeline work and must compensate at their own cost.
No interest is chargeable for dues or additional dues.
The contractor must sign each page of the tender paper; unsigned tenders will be rejected.
Payment will be made after completion of work, handing over of electric line and substation to TPNODL, and completion of all formalities with TPNODL.
Any defects occurring within 18 months of commissioning must be rectified by the contractor within 7 days.
The contractor shall not sublet the contract without written permission from the Executive Engineer.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Bill of quantities

58 priced items · ₹28.79 L (₹28,78,759)

Download BOQ file

Major components

Share of BOQ amount, grouped by item description

Plumbing & water supply55%₹15.90 L
Earthwork & excavation24%₹6.87 L
Electrical12%₹3.54 L
Concrete & RCC4%₹1.24 L
Masonry3%₹88.8K
Reinforcement steel1%₹21.0K

Largest items

By amount

Cost, Supplying of ISI marked 160 mm dia High Density Polythelene (HDPE) Pipes PE 80-PN 4 for water supply as…Item 1.2 · 956 Mtr₹5.19 L
Construction and erection of 11 /0.4 KV , 25 KVA Double Pole mounted Substation with 5mtrx3mtrx1.5mtr height…Item 2.02 · 1 No₹4.06 L
Fitting and Fixing 160 mm dia High Density Polythelene (HDPE) Pipes PE 80-PN 4 Pipe including jointing the pi…Item 1.21 · 956 Mtr₹3.29 L
Construction of 3 phase 11 KV HT line as per REC standard confirming to IE Rules 1956 with 300 kg 9 M long PS…Item 2.01 · 0.4 Km.₹2.08 L
From 0 mtr. to 100th metersItem 3.03 · 90 Per mtr.₹1.90 L

Tender details

Tender reference: OLIC_02_26_27
Tender ID: 2026_OLIC_144327_66
District: Jajpur
Location: Jajpur Road
Tender type: Open Tender
Tender category: Works

Show all 8 fields

Product category: Civil Works - Lift Irrigation Schemes
Pincode: 755019

Authority

State
Government of Odisha
Department
Orissa Lift Irrigation Corporation
Organisation
LI,Central Circle, Cuttack
Office
LI Division Jajpur Road
Inviting authority
Executive Engineer L.I.DIvision, Jajpur Road

All Orissa Lift Irrigation Corporation tenders in Jajpur →

Costs

Estimated value: ₹29,26,152; ₹29.26 lakh
EMD / bid security: ₹29,262; Exemption available for eligible bidders
Tender fee: ₹7,080; Cost of bid document

Bid validity: 90 days

Security & deductions from the DTCN (9)

EMD is 1% of the Estimated Cost, to be deposited online.
The EMD will be forfeited if the successful bidder fails to execute the agreement or furnish the required Performance Security within the specified time.
If any submitted documents are found false/fabricated/bogus, the bidder will be blacklisted and EMD forfeited.
Additional Performance Security (APS) will be calculated on an incremental basis if the accepted bid price is lower than the Cost Put to Tender, as per the specified ROPL percentages.
The APS shall be treated as part of the performance security.
The provision of APS is applicable to all forms of tender except Turnkey Tender.
The successful tenderer must execute an agreement in P.W.D. F2 Contract form within 7 days of receiving the Letter of Intimation, with an ISD Value of 1% pledged in favor of the Executive Engineer.
Security deposit of 5% of the bill will be deducted and refunded after 18 months from the date of handing over, subject to final bill payment.
If the contractor fails to rectify defects, the department may engage another contractor and deduct costs from the security deposit.

Source: Original DTCN

Frequently asked questions

Eligibility & bid requirements

DTCN analysed77 requirements extracted22 documents identifiedExtracted from the official tender document

Eligibility

8 items

Contractors/Firms must have a valid PWD License of the required class for Civil Works.
Contractors must have a valid HT License issued by ELBO.
Contractors must possess a truck-mounted Mud Rotary Rig for Drilling of TWs.

Show 5 more

Contractors registered with other State Govt./M.E.S./Railways/CPWD in equivalent rank may participate, but successful bidders must register under Odisha PWD before signing the agreement.
For Joint Ventures, the Civil Contractor must be the 1st Party with more than 51% share and be the prime contractor.
Defaulter contractors are not allowed to participate.
SC/ST contractors with both Civil & Electrical Licenses are eligible for price preference, up to 'B' Class registration (no preference for Joint Ventures).
PA holders of SC/ST bidders must belong to the SC/ST category.

Source: Original DTCNView source document

Experience

3 items

For TW projects, bidders without their own rig must submit a joint venture agreement with a rig owner, executed in the court of a First Class Magistrate/Executive Magistrate.
Contractors should have executed similar type of work in the last five years.
For TW packages, experienced Rig holders must participate in Joint Venture Agreements with the required class of contractor, submitting experience certificates from an authority not less than the rank of an Executive Officer of the Rig holder.

Source: Original DTCNView source document

Financial

11 items

The firm must possess liquid assets or credit facilities of not less than 20% of the amount put to tender.
EMD is 1% of the Estimated Cost, to be deposited online.
The EMD will be forfeited if the successful bidder fails to execute the agreement or furnish the required Performance Security within the specified time.

Show 8 more

If any submitted documents are found false/fabricated/bogus, the bidder will be blacklisted and EMD forfeited.
Additional Performance Security (APS) will be calculated on an incremental basis if the accepted bid price is lower than the Cost Put to Tender, as per the specified ROPL percentages.
The APS shall be treated as part of the performance security.
The provision of APS is applicable to all forms of tender except Turnkey Tender.
The successful tenderer must execute an agreement in P.W.D. F2 Contract form within 7 days of receiving the Letter of Intimation, with an ISD Value of 1% pledged in favor of the Executive Engineer.
Non-entering into agreement will lead to forfeiture of Earnest Money.
Security deposit of 5% of the bill will be deducted and refunded after 18 months from the date of handing over, subject to final bill payment.
If the contractor fails to rectify defects, the department may engage another contractor and deduct costs from the security deposit.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

27 items

Contractors having their own plants and machineries (Rig & Ancillaries) will be given weightage.
The work involves drilling, installation, and energisation of Lift Irrigation Projects on a Turnkey basis.
The scope includes erection of 11KV Line, L.T Line, and commissioning of Electrical Substation.

Show 24 more

Installation of Pump Set, Starter, and its energisation is required.
For 11 KV line erection, the conductor size is 55/80 mm2 A.A.A.C. with a span length of 0.07 km.
For L.T. line erection, materials for 1 km of L.T. line with A.B. conductor of 34 mm2 and AAA conductor of 34 mm2 are specified, with a span length of 0.03 km.
Sub-stations will be 11/0.4 KV, ranging from 25 KVA to 100 KVA.
Transformers must undergo routine tests as per IS-2026/1977 or its latest amendment.
Transformer oil must meet specified characteristics for appearance, density, viscosity, flash point, pour point, neutralization value, electric strength, dielectric dissipation factor, specific resistance, oxidation stability, and water content.
Lightening arresters must be Metal oxide gapless distribution type, 12 KV rated voltage, 5 KA nominal discharge current, and meet other specified technical particulars.
Materials for one cut point for 3 phase 11 KV overload line, one guarding for 11 KV overload line, and one line D.P. for 3 phase 11 KV line are specified.
UPVC Pipe, HDPE Pipe, and other EPM rate contract items must be procured from EPM registered firms of Govt. of Odisha with Pre & Post inspection Certificates from CIPET authority.
Materials supplied must conform to the latest ISI/CPRI specifications, or specifications made by the Executive Engineer.
Bricks used must be well burnt, of good quality, approved by the site Engineer, and confirm to the minimum strength as per National Building Code.
Contractor must arrange necessary tools and plants, Rig & Machineries for efficient execution of works at their own cost.
Contractor must employ Engineers/Technical staff as per norms of the Govt. of Odisha.
Samples of stone, metal, chips, sand, cement, and all mechanical, electro-mechanical, and electrical materials must be deposited/inspected for testing and acceptance.
The contractor must provide adequate lighting arrangements for night works, fencing, barriers, and signals for public safety.
The contractor must arrange for water supply for all works and make sanitary arrangements for labour camps.
Dewatering from the foundation of structures must be done by the contractor at no extra cost.
The contractor must abide by the CPWD safety code rules.
The contractor must provide adequate protection measures to completed works and works in progress against damages until handing over.
In case of drilling work failure, the failed bore hole, mud pits, and channel lines must be refilled with sand and extracted earth immediately.
The contractor must arrange for all requisite equipment for testing after completion of work and bear the entire cost.
The contractor must inform the President/Secretary and Pani Panchayat members for commissioning and trial run of the project.
After completion, materials fitted at the project must be handed over to the Pani Panchayat President/Secretary.
Electrical works must be handed over to TPNODL for maintenance after completion.

Source: Original DTCNView source document

Contract conditions

28 items

The tender closing date is Dt. 03.11.26 up to 5:00 P.M.
The bid opening date is Dt. 04.11.26 at 11:00 A.M.
The validity of the offer is 180 days.

Show 25 more

Completion period for each work is 90 days from the date of issue of the work order.
A compensation of 0.5% on the estimated cost per week will be levied for uncommenced or unfinished work, not exceeding 10% of the estimated cost.
If the contractor fails to meet progress milestones (1/4th work by 1/4th time, 1/2 work by 1/2 time, 3/4th work by 3/4th time), a compensation of 0.33% on the estimated cost per week will be levied.
If multiple bids are lowest, a transparent lottery system will be used to finalize the tender.
SC/ST contractors receive a 10% price preference; if their rate matches the lowest bidder after preference, a lottery system will be used.
The cost of the Stamp paper for the agreement will be borne by the Tenderer.
The work order may be placed to other participants if the approved tenderer fails to execute the agreement or work within the stipulated time.
The Executive Engineer reserves the right to increase or decrease the quantity of work or reject any or all tenders without assigning reasons.
The contractor is responsible for payment of all royalties, local taxes, Octroi Charges, Ferry & Tollage charges.
No materials will be supplied by the Corporation unless under special circumstances.
The contractor is fully liable to indemnify the Corporation for any compensation under the Workmen's Compensation Act.
No claim for idle labour/machinery/equipment will be entertained.
No compensation will be paid for damages due to natural calamities.
Extra items of work or extra quantity will not be paid unless a written order is obtained and rates settled beforehand.
All taxes, cess, royalties, income taxes, and surcharges will be borne by the bidder, except GST which will be paid extra.
The quoted rates shall be inclusive of all elements except GST.
Conditional tenders or tenders with extraneous conditions are liable for rejection.
The contractor must abide by fair wages clauses and not pay less than the fair wages fixed by the Government.
The contractor must submit a monthly return of labour employed.
The contractor is responsible for any damage to Government or private property during pipeline work and must compensate at their own cost.
No interest is chargeable for dues or additional dues.
The contractor must sign each page of the tender paper; unsigned tenders will be rejected.
Payment will be made after completion of work, handing over of electric line and substation to TPNODL, and completion of all formalities with TPNODL.
Any defects occurring within 18 months of commissioning must be rectified by the contractor within 7 days.
The contractor shall not sublet the contract without written permission from the Executive Engineer.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Costs

Estimated value

₹29,26,152

₹29.26 lakh

EMD / bid security

₹29,262

Exemption available for eligible bidders

Tender fee

₹7,080

Cost of bid document

Bid validity: 90 days

Security & deductions from the DTCN (9)

EMD is 1% of the Estimated Cost, to be deposited online.
The EMD will be forfeited if the successful bidder fails to execute the agreement or furnish the required Performance Security within the specified time.
If any submitted documents are found false/fabricated/bogus, the bidder will be blacklisted and EMD forfeited.
Additional Performance Security (APS) will be calculated on an incremental basis if the accepted bid price is lower than the Cost Put to Tender, as per the specified ROPL percentages.
The APS shall be treated as part of the performance security.
The provision of APS is applicable to all forms of tender except Turnkey Tender.
The successful tenderer must execute an agreement in P.W.D. F2 Contract form within 7 days of receiving the Letter of Intimation, with an ISD Value of 1% pledged in favor of the Executive Engineer.
Security deposit of 5% of the bill will be deducted and refunded after 18 months from the date of handing over, subject to final bill payment.
If the contractor fails to rectify defects, the department may engage another contractor and deduct costs from the security deposit.

Source: Original DTCN

Frequently asked questions

PKG62

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

PKG62

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more