What is the last date to bid for this tender?

Bids must be submitted on the Odisha eProcurement portal (tendersodisha.gov.in) by 06 Nov 2026, 05:00 PM. Bids are scheduled to open on 07 Nov 2026, 11:00 AM.

What is the estimated value of this tender?

The estimated tender value is ₹29.14 L (₹29,13,523).

How much EMD is required?

The EMD (bid security) is ₹29.1K (₹29,135). The portal lists EMD exemption as available for eligible bidders — check the DTCN for who qualifies.

Who can bid for this tender?

The DTCN states: Reputed Contractors/Firms with valid PWD License of required class for Civil Works; Contractors must have a valid HT License issued by ELBO.

What work experience is required?

As extracted from the DTCN: For TW packages, Rig owner's experience certificates from an authority not less than the rank of Executive Officer are required.

Which department issued this tender?

This tender was issued by Orissa Lift Irrigation Corporation, LI,Central Circle, Cuttack, LI Division Jajpur Road; the tender inviting authority is the Executive Engineer L.I.DIvision, Jajpur Road.

What documents are required to submit a bid?

The DTCN lists 26 documents, including PWD License (Civil), HT License (Electrical), Rig Owner's Experience Certificates (for TW projects), Rig RC Book (for TW projects), Rig Fitness Certificate (for TW projects), Rig Permit (for TW projects), and 20 more.

OtherLive

PKG61

Jajpur Road, Jajpur Orissa Lift Irrigation CorporationLI Division Jajpur Road

Tender ID 2026_OLIC_144327_65Ref OLIC_02_26_27

Estimated value: ₹29.14 L
EMD: ₹29.1K; Exemption available
Tender fee: ₹7.1K
Work period: —

Closing in

3 days left

06 Nov 2026, 05:00 PM

About this tender

Orissa Lift Irrigation Corporation has invited bids for “PKG61” in Jajpur Road, Jajpur district, Odisha. The estimated tender value is ₹29.14 lakh. Bids must be submitted by 06 Nov 2026, 05:00 PM.

Bid readiness

Based on the tender, not your profile

Done: Tender is currently open
Done: BOQ available · 58 items
Done: DTCN analysed · 66 requirements extracted
Done: 26 required documents identified
Needs review: Experience requirement needs review
Needs review: Financial requirements need review

Review requirements

Important dates

All times IST, as published on the portal

Published30 Oct 2026, 12:00 PM
Document downloadUntil 06 Nov 2026
Submission deadline· 3 days left06 Nov 2026, 05:00 PM
Bid opening07 Nov 2026, 11:00 AM

Tender intelligence

Eligibility & bid requirements

DTCN analysed66 requirements extracted26 documents identifiedExtracted from the official tender document

This tender from the Odisha Lift Irrigation Corporation Limited (OLIC) invites bids for 76 packages of drilling, installation, and energization of Lift Irrigation Projects on a Turnkey basis in Jajpur District. The work involves civil, electrical, and drilling components, including the erection of 11KV and LT lines, commissioning of electrical substations, and installation of pump sets. Estimated costs range from Rs. 24.60 Lakh to Rs. 29.51 Lakh per package, with a completion period of 90 days for each. Contractors must possess valid PWD and HT licenses and, for certain packages, own a truck-mounted mud rotary rig or enter into a joint venture with a rig owner.

Eligibility

9 items

Reputed Contractors/Firms with valid PWD License of required class for Civil Works.
Contractors must have a valid HT License issued by ELBO.
Contractors registered with other State Govt./M.E.S./Railways/Central Govt./other Govt. undertakings in equivalent grade/class may participate, but successful bidders must register under Odisha State PWD before signing the agreement.

Show 6 more

For TW projects, bidders must have a Truck mounted Mud Rotary Rig for Drilling of TWs or submit a joint venture agreement with a rig owner.
In a joint venture, the Civil Contractor must be the 1st Party with more than 51% share and be the prime contractor.
SC/ST contractors with both Civil & Electrical Licenses are eligible for price preference.
P.A. holders of any SC/ST bidders must belong to the SC/ST category.
Defaulter contractors are not allowed to participate.
Transformers must undergo routine tests as per IS-2026/1977 or its latest amendment, including winding resistance, ratio, polarity, phase relationship, impedance voltage, load loss, natural unbalance current, no-load loss, insulation resistance, induced over-voltage withstand, separate sources voltage withstand, magnetic balance, air pressure, oil leakage, vector group, dimensions, P.I. value, and oil BDV tests.

Source: Original DTCNView source document

Experience

1 item

For TW packages, Rig owner's experience certificates from an authority not less than the rank of Executive Officer are required.

Source: Original DTCNView source document

Financial

11 items

The firm must possess liquid assets or credit facilities of not less than 20% of the amount put to tender.
Intending Engineering Contractors seeking EMD exemption must furnish an affidavit stating they have not been awarded a minimum of 3 works during the current financial year.
EMD is 1% of the Estimated Cost, to be deposited online.

Show 8 more

EMD will be forfeited if a successful bidder fails to execute the agreement or furnish the required Performance Security within the specified time limit.
If any submitted documents are found false/fabricated/bogus, the bidder will be blacklisted and EMD forfeited.
Additional Performance Security (APS) will be obtained on an incremental basis if the accepted bid price is lower than the Cost Put to Tender, as per the specified calculation method.
The APS provision is not applicable to Turnkey Tenders.
The successful tenderer must execute an agreement in P.W.D. F2 Contract form within 7 days of receiving the Letter of Intimation, with an ISD Value of 1% in specified forms.
Non-entering into agreement will lead to forfeiture of Earnest Money.
Security deposit @ 5% of the bill will be deducted and refunded after 18 months from the date of handing over, subject to final bill payment.
If the contractor fails to rectify defects, the Department may engage another contractor and deduct costs from the security deposit.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

24 items

Contractors having own plants and machineries (Rig & Ancillaries) will be given weightage.
Contractor shall employ Engineers/Tech. staff as per norms of the Govt. of Odisha.
Work involves drilling, installation, and energisation of Lift Irrigation Projects on Turnkey basis.

Show 21 more

Includes erection of 11KV Line, L.T Line & Commissioning of Electrical Substation for power supply.
Installation of Pump Set, Starter and its energisation.
For TW projects, bidders must have a Truck mounted Mud Rotary Rig for Drilling of TWs.
The size of conductor for 11 KV line is 55/80 mm2 A.A.A.C. as per TPNODL Estimate, with a span length of 0.07 km.
The materials for 1 km of L.T. line with A.B. conductor of 34 mm2 and AAA conductor of 34 mm2 are specified, with a span length of 0.03 km.
Sub-stations will be 11/0.4 KV, ranging from 25 KVA to 100 KVA.
Transformer oil must meet specified characteristics for appearance, density, kinematic viscosity, interfacial tension, flash point, pour point, neutralization value, corrosive sulfur, electric strength, dielectric dissipation factor, specific resistance, oxidation stability, and water content.
Lightening arresters must be Metal oxide gapless distribution type, 12 KV rated voltage, 5 KA nominal discharge current, and meet other detailed technical specifications.
Materials for one cut point for 3 phase 11 KV overload line, guarding, and line D.P. for 3 phase 11 KV line are specified.
All materials supplied by the contractor should be procured from firms of Odisha and approved by the Engineer-in-charge.
UPVC Pipe, HDPE Pipe and any other EPM rate contract items are to be procured from EPM registered firms of Govt. of Odisha with Pre & Post inspection Certificates from CIPET authority.
Bricks should be well burnt, of good quality, approved by the site Engineer, and confirm to the minimum strength as per National Building Code.
Materials to be supplied for use in the works should be of ISI specification.
The contractor must arrange necessary tools and plants, Rig & Machineries for efficient execution of works at their own cost.
The contractor must provide adequate lighting arrangements for night works whenever necessary at their own cost.
The contractor must arrange for water supply for all works, curing of masonry works, and make sanitary arrangements for labour camps at their own cost.
Dewatering from the foundation of structures, when necessary, must be done by the contractor at no extra cost.
The contractor must supply necessary labour and materials for alignment, level recording, and measurement assistance at their own cost.
The contractor must provide adequate protection measures for completed works and works in progress against damages until handing over.
The contractor must submit samples of stone, metal, chips, sand, cement, etc., for testing and acceptance before procurement.
Mechanical, electro-mechanical, and electrical materials are to be inspected at the principal manufacturer's site by the employer before dispatch, with costs borne by the contractor.

Source: Original DTCNView source document

Contract conditions

21 items

The completion period for each work is 90 days from the date of issue of the work order.
The offer validity period is 180 days from the date of opening of the Financial Bids.
If multiple bids are lowest, a transparent lottery system will be used to finalize the tender.

Show 18 more

SC/ST contractors may receive price preference of 10% as per Works Department Resolution No. 16262 dated 30.10.2018.
The cost of stamp paper for the agreement will be borne by the tenderer.
The contractor is responsible for payment of all royalties, local taxes, income tax, surcharges, and labour cess; GST will be paid extra.
Conditional tenders or tenders with extraneous conditions will be rejected.
The contract work should not be sublet without written permission from the Executive Engineer.
The authority reserves the right to increase or decrease the quantity of work items; no compensation will be given for this, only extension of time if necessary.
The work may be split and distributed among several contractors without compensation to the original contractor.
The contractor must abide by the fair wages clauses and not pay less than the fair wages fixed by the Government.
No compensation will be paid for damages due to natural calamities.
No claim for idle labour/machinery/equipment will be entertained.
Interest is not chargeable for dues or additional dues.
The contractor must submit a work plan and monthly work progress reports.
The contractor is liable to fully indemnify the Department for any compensation under the Workmen's Compensation Act.
Any defects occurring within 18 months of commissioning must be rectified by the contractor within 7 days.
The contractor must sign each page of the tender paper; unsigned papers will be rejected.
Damages caused to any Govt. or private property during pipeline work must be compensated by the contractor.
Payment will be made after completion of work, handing over of electric line and substation to TPNODL, and completion of all formalities with TPNODL.
If abnormally low rates are quoted for some items, the Corporation may withhold the differential cost from other payments until those items are completed.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Bill of quantities

58 priced items · ₹28.66 L (₹28,66,130)

Download BOQ file

Major components

Share of BOQ amount, grouped by item description

Plumbing & water supply50%₹14.21 L
Earthwork & excavation23%₹6.50 L
Electrical20%₹5.63 L
Concrete & RCC4%₹1.11 L
Masonry3%₹88.8K
Reinforcement steel1%₹18.9K

Largest items

By amount

Cost, Supplying of ISI marked 160 mm dia High Density Polythelene (HDPE) Pipes PE 80-PN 4 for water supply as…Item 1.2 · 840 Mtr₹4.56 L
Construction of 3 phase 11 KV HT line as per REC standard confirming to IE Rules 1956 with 300 kg 9 M long PS…Item 2.01 · 0.8 Km.₹4.17 L
Construction and erection of 11 /0.4 KV , 25 KVA Double Pole mounted Substation with 5mtrx3mtrx1.5mtr height…Item 2.02 · 1 No₹4.06 L
Fitting and Fixing 160 mm dia High Density Polythelene (HDPE) Pipes PE 80-PN 4 Pipe including jointing the pi…Item 1.21 · 840 Mtr₹2.89 L
From 0 mtr. to 100th metersItem 3.03 · 90 Per mtr.₹1.90 L

Tender details

Tender reference: OLIC_02_26_27
Tender ID: 2026_OLIC_144327_65
District: Jajpur
Location: Jajpur Road
Tender type: Open Tender
Tender category: Works

Show all 8 fields

Product category: Civil Works - Lift Irrigation Schemes
Pincode: 755019

Authority

State
Government of Odisha
Department
Orissa Lift Irrigation Corporation
Organisation
LI,Central Circle, Cuttack
Office
LI Division Jajpur Road
Inviting authority
Executive Engineer L.I.DIvision, Jajpur Road

All Orissa Lift Irrigation Corporation tenders in Jajpur →

Costs

Estimated value: ₹29,13,523; ₹29.14 lakh
EMD / bid security: ₹29,135; Exemption available for eligible bidders
Tender fee: ₹7,080; Cost of bid document

Bid validity: 90 days

Security & deductions from the DTCN (9)

Intending Engineering Contractors seeking EMD exemption must furnish an affidavit stating they have not been awarded a minimum of 3 works during the current financial year.
EMD is 1% of the Estimated Cost, to be deposited online.
EMD will be forfeited if a successful bidder fails to execute the agreement or furnish the required Performance Security within the specified time limit.
If any submitted documents are found false/fabricated/bogus, the bidder will be blacklisted and EMD forfeited.
Additional Performance Security (APS) will be obtained on an incremental basis if the accepted bid price is lower than the Cost Put to Tender, as per the specified calculation method.
The APS provision is not applicable to Turnkey Tenders.
The successful tenderer must execute an agreement in P.W.D. F2 Contract form within 7 days of receiving the Letter of Intimation, with an ISD Value of 1% in specified forms.
Security deposit @ 5% of the bill will be deducted and refunded after 18 months from the date of handing over, subject to final bill payment.
If the contractor fails to rectify defects, the Department may engage another contractor and deduct costs from the security deposit.

Source: Original DTCN

Frequently asked questions

Eligibility & bid requirements

DTCN analysed66 requirements extracted26 documents identifiedExtracted from the official tender document

Eligibility

9 items

Reputed Contractors/Firms with valid PWD License of required class for Civil Works.
Contractors must have a valid HT License issued by ELBO.
Contractors registered with other State Govt./M.E.S./Railways/Central Govt./other Govt. undertakings in equivalent grade/class may participate, but successful bidders must register under Odisha State PWD before signing the agreement.

Show 6 more

For TW projects, bidders must have a Truck mounted Mud Rotary Rig for Drilling of TWs or submit a joint venture agreement with a rig owner.
In a joint venture, the Civil Contractor must be the 1st Party with more than 51% share and be the prime contractor.
SC/ST contractors with both Civil & Electrical Licenses are eligible for price preference.
P.A. holders of any SC/ST bidders must belong to the SC/ST category.
Defaulter contractors are not allowed to participate.
Transformers must undergo routine tests as per IS-2026/1977 or its latest amendment, including winding resistance, ratio, polarity, phase relationship, impedance voltage, load loss, natural unbalance current, no-load loss, insulation resistance, induced over-voltage withstand, separate sources voltage withstand, magnetic balance, air pressure, oil leakage, vector group, dimensions, P.I. value, and oil BDV tests.

Source: Original DTCNView source document

Experience

1 item

For TW packages, Rig owner's experience certificates from an authority not less than the rank of Executive Officer are required.

Source: Original DTCNView source document

Financial

11 items

The firm must possess liquid assets or credit facilities of not less than 20% of the amount put to tender.
Intending Engineering Contractors seeking EMD exemption must furnish an affidavit stating they have not been awarded a minimum of 3 works during the current financial year.
EMD is 1% of the Estimated Cost, to be deposited online.

Show 8 more

EMD will be forfeited if a successful bidder fails to execute the agreement or furnish the required Performance Security within the specified time limit.
If any submitted documents are found false/fabricated/bogus, the bidder will be blacklisted and EMD forfeited.
Additional Performance Security (APS) will be obtained on an incremental basis if the accepted bid price is lower than the Cost Put to Tender, as per the specified calculation method.
The APS provision is not applicable to Turnkey Tenders.
The successful tenderer must execute an agreement in P.W.D. F2 Contract form within 7 days of receiving the Letter of Intimation, with an ISD Value of 1% in specified forms.
Non-entering into agreement will lead to forfeiture of Earnest Money.
Security deposit @ 5% of the bill will be deducted and refunded after 18 months from the date of handing over, subject to final bill payment.
If the contractor fails to rectify defects, the Department may engage another contractor and deduct costs from the security deposit.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

24 items

Contractors having own plants and machineries (Rig & Ancillaries) will be given weightage.
Contractor shall employ Engineers/Tech. staff as per norms of the Govt. of Odisha.
Work involves drilling, installation, and energisation of Lift Irrigation Projects on Turnkey basis.

Show 21 more

Includes erection of 11KV Line, L.T Line & Commissioning of Electrical Substation for power supply.
Installation of Pump Set, Starter and its energisation.
For TW projects, bidders must have a Truck mounted Mud Rotary Rig for Drilling of TWs.
The size of conductor for 11 KV line is 55/80 mm2 A.A.A.C. as per TPNODL Estimate, with a span length of 0.07 km.
The materials for 1 km of L.T. line with A.B. conductor of 34 mm2 and AAA conductor of 34 mm2 are specified, with a span length of 0.03 km.
Sub-stations will be 11/0.4 KV, ranging from 25 KVA to 100 KVA.
Transformer oil must meet specified characteristics for appearance, density, kinematic viscosity, interfacial tension, flash point, pour point, neutralization value, corrosive sulfur, electric strength, dielectric dissipation factor, specific resistance, oxidation stability, and water content.
Lightening arresters must be Metal oxide gapless distribution type, 12 KV rated voltage, 5 KA nominal discharge current, and meet other detailed technical specifications.
Materials for one cut point for 3 phase 11 KV overload line, guarding, and line D.P. for 3 phase 11 KV line are specified.
All materials supplied by the contractor should be procured from firms of Odisha and approved by the Engineer-in-charge.
UPVC Pipe, HDPE Pipe and any other EPM rate contract items are to be procured from EPM registered firms of Govt. of Odisha with Pre & Post inspection Certificates from CIPET authority.
Bricks should be well burnt, of good quality, approved by the site Engineer, and confirm to the minimum strength as per National Building Code.
Materials to be supplied for use in the works should be of ISI specification.
The contractor must arrange necessary tools and plants, Rig & Machineries for efficient execution of works at their own cost.
The contractor must provide adequate lighting arrangements for night works whenever necessary at their own cost.
The contractor must arrange for water supply for all works, curing of masonry works, and make sanitary arrangements for labour camps at their own cost.
Dewatering from the foundation of structures, when necessary, must be done by the contractor at no extra cost.
The contractor must supply necessary labour and materials for alignment, level recording, and measurement assistance at their own cost.
The contractor must provide adequate protection measures for completed works and works in progress against damages until handing over.
The contractor must submit samples of stone, metal, chips, sand, cement, etc., for testing and acceptance before procurement.
Mechanical, electro-mechanical, and electrical materials are to be inspected at the principal manufacturer's site by the employer before dispatch, with costs borne by the contractor.

Source: Original DTCNView source document

Contract conditions

21 items

The completion period for each work is 90 days from the date of issue of the work order.
The offer validity period is 180 days from the date of opening of the Financial Bids.
If multiple bids are lowest, a transparent lottery system will be used to finalize the tender.

Show 18 more

SC/ST contractors may receive price preference of 10% as per Works Department Resolution No. 16262 dated 30.10.2018.
The cost of stamp paper for the agreement will be borne by the tenderer.
The contractor is responsible for payment of all royalties, local taxes, income tax, surcharges, and labour cess; GST will be paid extra.
Conditional tenders or tenders with extraneous conditions will be rejected.
The contract work should not be sublet without written permission from the Executive Engineer.
The authority reserves the right to increase or decrease the quantity of work items; no compensation will be given for this, only extension of time if necessary.
The work may be split and distributed among several contractors without compensation to the original contractor.
The contractor must abide by the fair wages clauses and not pay less than the fair wages fixed by the Government.
No compensation will be paid for damages due to natural calamities.
No claim for idle labour/machinery/equipment will be entertained.
Interest is not chargeable for dues or additional dues.
The contractor must submit a work plan and monthly work progress reports.
The contractor is liable to fully indemnify the Department for any compensation under the Workmen's Compensation Act.
Any defects occurring within 18 months of commissioning must be rectified by the contractor within 7 days.
The contractor must sign each page of the tender paper; unsigned papers will be rejected.
Damages caused to any Govt. or private property during pipeline work must be compensated by the contractor.
Payment will be made after completion of work, handing over of electric line and substation to TPNODL, and completion of all formalities with TPNODL.
If abnormally low rates are quoted for some items, the Corporation may withhold the differential cost from other payments until those items are completed.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Costs

Estimated value

₹29,13,523

₹29.14 lakh

EMD / bid security

₹29,135

Exemption available for eligible bidders

Tender fee

₹7,080

Cost of bid document

Bid validity: 90 days

Security & deductions from the DTCN (9)

Intending Engineering Contractors seeking EMD exemption must furnish an affidavit stating they have not been awarded a minimum of 3 works during the current financial year.
EMD is 1% of the Estimated Cost, to be deposited online.
EMD will be forfeited if a successful bidder fails to execute the agreement or furnish the required Performance Security within the specified time limit.
If any submitted documents are found false/fabricated/bogus, the bidder will be blacklisted and EMD forfeited.
Additional Performance Security (APS) will be obtained on an incremental basis if the accepted bid price is lower than the Cost Put to Tender, as per the specified calculation method.
The APS provision is not applicable to Turnkey Tenders.
The successful tenderer must execute an agreement in P.W.D. F2 Contract form within 7 days of receiving the Letter of Intimation, with an ISD Value of 1% in specified forms.
Security deposit @ 5% of the bill will be deducted and refunded after 18 months from the date of handing over, subject to final bill payment.
If the contractor fails to rectify defects, the Department may engage another contractor and deduct costs from the security deposit.

Source: Original DTCN

Frequently asked questions

PKG61

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

PKG61

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more