What is the last date to bid for this tender?

Bids must be submitted on the Odisha eProcurement portal (tendersodisha.gov.in) by 06 Nov 2026, 05:00 PM. Bids are scheduled to open on 07 Nov 2026, 11:00 AM.

What is the estimated value of this tender?

The estimated tender value is ₹27.50 L (₹27,50,442).

How much EMD is required?

The EMD (bid security) is ₹27.5K (₹27,504). The portal lists EMD exemption as available for eligible bidders — check the DTCN for who qualifies.

Who can bid for this tender?

The DTCN states: Reputed Contractors/Firms with valid PWD License of required class for Civil Works; Contractors must have a Truck mounted Mud Rotary Rig for Drilling of TWs.

What work experience is required?

As extracted from the DTCN: For TW projects, bidders without their own rig must submit a joint venture agreement with a rig owner, executed in the court of a First Class Magistrate/Executive Magistrate; Contractors should have executed similar type of work in the last five years.

Which department issued this tender?

This tender was issued by Orissa Lift Irrigation Corporation, LI,Central Circle, Cuttack, LI Division Jajpur Road; the tender inviting authority is the Executive Engineer L.I.DIvision, Jajpur Road.

What documents are required to submit a bid?

The DTCN lists 26 documents, including PWD License (Civil), HT License (Electrical), Rig Owner’s Experience Certificates (for TW projects), Rig RC Book (for TW projects), Rig Fitness Certificate (for TW projects), Rig Permit (for TW projects), and 20 more.

OtherLive

PKG55

Jajpur Road, Jajpur Orissa Lift Irrigation CorporationLI Division Jajpur Road

Tender ID 2026_OLIC_144327_59Ref OLIC_02_26_27

Estimated value: ₹27.50 L
EMD: ₹27.5K; Exemption available
Tender fee: ₹7.1K
Work period: —

Closing in

3 days left

06 Nov 2026, 05:00 PM

About this tender

Orissa Lift Irrigation Corporation has invited bids for “PKG55” in Jajpur Road, Jajpur district, Odisha. The estimated tender value is ₹27.50 lakh. Bids must be submitted by 06 Nov 2026, 05:00 PM.

Bid readiness

Based on the tender, not your profile

Done: Tender is currently open
Done: BOQ available · 59 items
Done: DTCN analysed · 78 requirements extracted
Done: 26 required documents identified
Needs review: Experience requirement needs review
Needs review: Financial requirements need review

Review requirements

Important dates

All times IST, as published on the portal

Published29 Oct 2026, 11:00 AM
Document downloadUntil 06 Nov 2026
Submission deadline· 3 days left06 Nov 2026, 05:00 PM
Bid opening07 Nov 2026, 11:00 AM

Tender intelligence

Eligibility & bid requirements

DTCN analysed78 requirements extracted26 documents identifiedExtracted from the official tender document

This tender from the Odisha Lift Irrigation Corporation Limited (OLIC) invites bids for the drilling, installation, and energization of 76 Lift Irrigation Projects in Jajpur District. The projects, valued between Rs. 24.60 Lakh and Rs. 29.51 Lakh, require contractors with valid PWD and HT licenses, and experience with drilling rigs. The work is on a turnkey basis, including civil, electrical, and energization components, with a completion period of 90 days per project.

Eligibility

8 items

Reputed Contractors/Firms with valid PWD License of required class for Civil Works.
Contractors must have a Truck mounted Mud Rotary Rig for Drilling of TWs.
Contractors must have registered HT License issued by ELBO.

Show 5 more

Registered with the State Govt. of Odisha or equivalent grade/class registered with other State Govt./Central Govt./M.E.S./Railways or other Govt. undertakings.
For Joint Ventures, the Civil Contractor must be the 1st Party with more than 51% share and be the prime contractor.
The Power of Attorney holders for SC/ST bidders must belong to the SC/ST category.
Defaulter contractors are not allowed to participate.
SC/ST contractors with both Civil & Electrical Licenses may receive price preference.

Source: Original DTCNView source document

Experience

3 items

For TW projects, bidders without their own rig must submit a joint venture agreement with a rig owner, executed in the court of a First Class Magistrate/Executive Magistrate.
Contractors should have executed similar type of work in the last five years.
For TW packages, experience Rig holders must participate in Joint Venture Agreement with the Civil Contractor in OLIC during the last 5 years.

Source: Original DTCNView source document

Financial

15 items

The firm must possess liquid assets or credit facilities of not less than 20% of the amount put to tender.
SC/ST contractors can avail EMD exemption if they furnish an affidavit stating they have not been awarded a minimum of 3 works during the current financial year.
EMD is 1% of the Estimated Cost, to be deposited online.

Show 12 more

EMD will be forfeited if the successful bidder fails to execute the agreement or furnish the required Performance Security within the specified time limit.
If any submitted documents are found false/fabricated/bogus, the bidder will be blacklisted and EMD forfeited.
Additional Performance Security (APS) will be obtained on an incremental basis if the accepted bid price is lower than the Cost Put to Tender, as per the specified rounding off percentage less (ROPL) calculation.
APS is not required if ROPL is up to (-)10%.
APS calculation varies for ROPL below (-)10% but not below (-)20%, below (-)20% but not below (-)30%, and below (-)30% or more.
APS shall be treated as part of the performance security and is not applicable to Turnkey Tenders.
APS will be refunded immediately on successful completion of the work within 7 days of issuance of Completion Certificate/Provisional Completion Certificate.
The successful Tenderer must execute an agreement in P.W.D. F2 Contract form within 7 days after receipt of Letter of Intimation, with a 1% ISD value in specified forms.
Non-entering into agreement shall lead to forfeiture of Earnest Money.
Income tax and surcharge will be deducted from each running account bill.
Labour Cess (currently 1%) will be deducted from the contractor's bill.
Security deposit of 5% of the bill will be deducted and refunded after 18 months from handing over, subject to final bill payment.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

21 items

Possession of a Truck mounted Mud Rotary Rig for Drilling of TWs.
Erection of 11KV Line, L.T Line & Commissioning of Electrical Substation for power supply to L.I Projects.
Installation of Pump Set, Starter and its energisation.

Show 18 more

For 11 KV line, the size of conductor to be used is 55/80 mm2 A.A.A.C. as per TPNODL Estimate, with a span length of 0.07 km.
For L.T. line, materials for 1 km with A.B. conductor of 34 mm2 and AAA conductor of 34 mm2 are specified, with a span length of 0.03 km.
Sub-stations will be 11/0.4 KV, ranging from 25 KVA to 100 KVA.
Contractor must submit test certificates for transformers issued by the manufacturer.
All transformers shall be subjected to routine tests at the manufacturer's work as per IS-2026/1977 or its latest amendment.
Transformer oil characteristics must meet specified standards for appearance, density, viscosity, flash point, pour point, neutralization value, electric strength, dielectric dissipation factor, specific resistance, oxidation stability, and water content.
Lightening arresters must be Metal oxide gapless distribution type, meeting REC Specification No. F-9 for rated voltage, nominal discharge current, reference current, reference voltage, residual voltage, continuous operative voltage, impulse withstand, insulation withstand, temporary over voltage withstand, radio interference voltage, step current impulse residual voltage, height, spacing, clearance, earthing, mounting, creep-age distance, and weight.
Materials for one cut point for 3 phase 11 KV overload line are specified.
Materials for one guarding to be erected in 11 KV overload line for road, power line, telephone line crossing etc. are specified.
Materials for one line D.P. for 3 phase 11 KV line are specified.
Contractor shall employ Engineers/Tech. staff as per norms of the Govt. of Odisha.
Samples of stone, metal, chips, sand, cement, etc., must be deposited for testing and acceptance before procurement.
Mechanical, electro-mechanical, and electrical materials are to be inspected at the principal manufacturer's site before dispatch.
All materials supplied by the contractor should be procured from Odisha firms and approved by the Engineer-in-charge.
UPVC Pipe, HDPE Pipe and other EPM rate contract items must be procured from EPM registered firms of Govt. of Odisha with Pre & Post inspection Certificates from CIPET authority.
UPVC pipes must bear ISI mark and CIPET testing certificate from Odisha firms.
Materials supplied must conform to the latest ISI/CPRI specifications, or specifications made by the Executive Engineer.
Bricks should be well burnt, of good quality, approved by the site Engineer, and confirm to the minimum strength as per National Building Code.

Source: Original DTCNView source document

Contract conditions

31 items

The completion period for each project is 90 days from the date of issue of the work order.
The validity of the offer is 180 days from the date of opening of the Financial Bids.
Successful bidders must register under the state PWD before signing the agreement if registered under other State Govt./M.E.S./Railways/CPWD.

Show 28 more

Conditional tenders or tenders with extraneous conditions will be rejected.
All taxes, cess, royalties, income taxes, surcharges, and labour cess will be borne by the bidder; only GST will be paid extra.
The contractor is liable to pay compensation at 0.5% of the estimated cost for every week of delay in uncommenced or unfinished work, up to a maximum of 10% of the estimated cost.
If the contractor fails to meet progress milestones (1/4th work by 1/4th time, 1/2 work by 1/2 time, 3/4th work by 3/4th time), compensation of 0.3% of the estimated cost per week of delay will be applied, not exceeding 10% of the estimated cost.
The contract may be rescinded if compensation exceeds 10% of the estimated cost, with a 20% penalty on the value of left-over work.
The contractor must submit a work plan at the time of agreement execution.
No claim for idle labour/machinery/equipment will be entertained.
The contract work should not be sublet; doing so may lead to rescission of the contract.
The authority reserves the right to increase or decrease quantities of work items; no compensation will be given for this, except for time extension if necessary.
The work may be split and distributed among several contractors; no compensation will be given for this.
The contractor is liable to fully indemnify the Department for any compensation under the Workmen's Compensation Act VII of 1993.
The contractor must abide by fair wages clauses and not pay less than the Government-fixed fair wages.
No compensation will be paid for damage due to natural calamities.
No extra payment will be made for extra items or quantities unless a written order is obtained and rates are settled beforehand.
The contractor must abide by CPWD safety code rules.
The contractor is responsible for all incidental charges, including rent, royalties, taxes, ferry tolls, conveyance, labour camps, water supply, fees, equipment, fencing, and compensation for injury.
Royalties for materials used will be recovered from the bill.
All preliminary works (GSTs, mixing platforms) are at the contractor's cost.
After work completion, all surplus materials and debris must be removed from 100 meters clear of the site.
The contractor must arrange necessary tools and plants at his own cost.
Interest is not chargeable for dues or additional dues.
The contractor is responsible for protecting men, machinery, materials, and work in progress against damages.
Dewatering from foundations is at the contractor's cost.
Quantities for items with quoted rates more than 25% of estimated rates cannot be varied by more than 5% without competent authority approval.
Any defects occurring within 18 months of commissioning must be rectified by the contractor within 7 days.
The tenderer must sign each page of the tender paper.
Damage to government or private property during pipeline work will be compensated by the contractor.
Payment will be made after completion of work, handing over of electric line and substation to TPNODL, and completion of all formalities with TPNODL.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Bill of quantities

59 priced items · ₹27.03 L (₹27,03,049)

Download BOQ file

Major components

Share of BOQ amount, grouped by item description

Plumbing & water supply47%₹12.75 L
Earthwork & excavation23%₹6.18 L
Electrical22%₹5.83 L
Concrete & RCC4%₹1.06 L
Masonry3%₹89.6K
Reinforcement steel1%₹17.8K

Largest items

By amount

Construction and erection of 11 /0.4 KV , 25 KVA Double Pole mounted Substation with 5mtrx3mtrx1.5mtr height…Item 2.02 · 1 No₹4.06 L
Cost, Supplying of ISI marked 160 mm dia High Density Polythelene (HDPE) Pipes PE 80-PN 4 for water supply as…Item 1.2 · 673 Mtr₹3.66 L
Construction of 3 phase 11 KV HT line as per REC standard confirming to IE Rules 1956 with 300 kg 9 M long PS…Item 2.01 · 0.6 Km.₹3.13 L
Fitting and Fixing 160 mm dia High Density Polythelene (HDPE) Pipes PE 80-PN 4 Pipe including jointing the pi…Item 1.21 · 673 Mtr₹2.33 L
From 0 mtr. to 100th metersItem 3.03 · 90 Per mtr.₹1.90 L

Tender details

Tender reference: OLIC_02_26_27
Tender ID: 2026_OLIC_144327_59
District: Jajpur
Location: Jajpur Road
Tender type: Open Tender
Tender category: Works

Show all 8 fields

Product category: Civil Works - Lift Irrigation Schemes
Pincode: 755019

Authority

State
Government of Odisha
Department
Orissa Lift Irrigation Corporation
Organisation
LI,Central Circle, Cuttack
Office
LI Division Jajpur Road
Inviting authority
Executive Engineer L.I.DIvision, Jajpur Road

All Orissa Lift Irrigation Corporation tenders in Jajpur →

Costs

Estimated value: ₹27,50,442; ₹27.50 lakh
EMD / bid security: ₹27,504; Exemption available for eligible bidders
Tender fee: ₹7,080; Cost of bid document

Bid validity: 90 days

Security & deductions from the DTCN (13)

SC/ST contractors can avail EMD exemption if they furnish an affidavit stating they have not been awarded a minimum of 3 works during the current financial year.
EMD is 1% of the Estimated Cost, to be deposited online.
EMD will be forfeited if the successful bidder fails to execute the agreement or furnish the required Performance Security within the specified time limit.
If any submitted documents are found false/fabricated/bogus, the bidder will be blacklisted and EMD forfeited.
Additional Performance Security (APS) will be obtained on an incremental basis if the accepted bid price is lower than the Cost Put to Tender, as per the specified rounding off percentage less (ROPL) calculation.
APS is not required if ROPL is up to (-)10%.
APS calculation varies for ROPL below (-)10% but not below (-)20%, below (-)20% but not below (-)30%, and below (-)30% or more.
APS shall be treated as part of the performance security and is not applicable to Turnkey Tenders.
APS will be refunded immediately on successful completion of the work within 7 days of issuance of Completion Certificate/Provisional Completion Certificate.
The successful Tenderer must execute an agreement in P.W.D. F2 Contract form within 7 days after receipt of Letter of Intimation, with a 1% ISD value in specified forms.
Income tax and surcharge will be deducted from each running account bill.
Labour Cess (currently 1%) will be deducted from the contractor's bill.
Security deposit of 5% of the bill will be deducted and refunded after 18 months from handing over, subject to final bill payment.

Source: Original DTCN

Frequently asked questions

Eligibility & bid requirements

DTCN analysed78 requirements extracted26 documents identifiedExtracted from the official tender document

Eligibility

8 items

Reputed Contractors/Firms with valid PWD License of required class for Civil Works.
Contractors must have a Truck mounted Mud Rotary Rig for Drilling of TWs.
Contractors must have registered HT License issued by ELBO.

Show 5 more

Registered with the State Govt. of Odisha or equivalent grade/class registered with other State Govt./Central Govt./M.E.S./Railways or other Govt. undertakings.
For Joint Ventures, the Civil Contractor must be the 1st Party with more than 51% share and be the prime contractor.
The Power of Attorney holders for SC/ST bidders must belong to the SC/ST category.
Defaulter contractors are not allowed to participate.
SC/ST contractors with both Civil & Electrical Licenses may receive price preference.

Source: Original DTCNView source document

Experience

3 items

For TW projects, bidders without their own rig must submit a joint venture agreement with a rig owner, executed in the court of a First Class Magistrate/Executive Magistrate.
Contractors should have executed similar type of work in the last five years.
For TW packages, experience Rig holders must participate in Joint Venture Agreement with the Civil Contractor in OLIC during the last 5 years.

Source: Original DTCNView source document

Financial

15 items

The firm must possess liquid assets or credit facilities of not less than 20% of the amount put to tender.
SC/ST contractors can avail EMD exemption if they furnish an affidavit stating they have not been awarded a minimum of 3 works during the current financial year.
EMD is 1% of the Estimated Cost, to be deposited online.

Show 12 more

EMD will be forfeited if the successful bidder fails to execute the agreement or furnish the required Performance Security within the specified time limit.
If any submitted documents are found false/fabricated/bogus, the bidder will be blacklisted and EMD forfeited.
Additional Performance Security (APS) will be obtained on an incremental basis if the accepted bid price is lower than the Cost Put to Tender, as per the specified rounding off percentage less (ROPL) calculation.
APS is not required if ROPL is up to (-)10%.
APS calculation varies for ROPL below (-)10% but not below (-)20%, below (-)20% but not below (-)30%, and below (-)30% or more.
APS shall be treated as part of the performance security and is not applicable to Turnkey Tenders.
APS will be refunded immediately on successful completion of the work within 7 days of issuance of Completion Certificate/Provisional Completion Certificate.
The successful Tenderer must execute an agreement in P.W.D. F2 Contract form within 7 days after receipt of Letter of Intimation, with a 1% ISD value in specified forms.
Non-entering into agreement shall lead to forfeiture of Earnest Money.
Income tax and surcharge will be deducted from each running account bill.
Labour Cess (currently 1%) will be deducted from the contractor's bill.
Security deposit of 5% of the bill will be deducted and refunded after 18 months from handing over, subject to final bill payment.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

21 items

Possession of a Truck mounted Mud Rotary Rig for Drilling of TWs.
Erection of 11KV Line, L.T Line & Commissioning of Electrical Substation for power supply to L.I Projects.
Installation of Pump Set, Starter and its energisation.

Show 18 more

For 11 KV line, the size of conductor to be used is 55/80 mm2 A.A.A.C. as per TPNODL Estimate, with a span length of 0.07 km.
For L.T. line, materials for 1 km with A.B. conductor of 34 mm2 and AAA conductor of 34 mm2 are specified, with a span length of 0.03 km.
Sub-stations will be 11/0.4 KV, ranging from 25 KVA to 100 KVA.
Contractor must submit test certificates for transformers issued by the manufacturer.
All transformers shall be subjected to routine tests at the manufacturer's work as per IS-2026/1977 or its latest amendment.
Transformer oil characteristics must meet specified standards for appearance, density, viscosity, flash point, pour point, neutralization value, electric strength, dielectric dissipation factor, specific resistance, oxidation stability, and water content.
Lightening arresters must be Metal oxide gapless distribution type, meeting REC Specification No. F-9 for rated voltage, nominal discharge current, reference current, reference voltage, residual voltage, continuous operative voltage, impulse withstand, insulation withstand, temporary over voltage withstand, radio interference voltage, step current impulse residual voltage, height, spacing, clearance, earthing, mounting, creep-age distance, and weight.
Materials for one cut point for 3 phase 11 KV overload line are specified.
Materials for one guarding to be erected in 11 KV overload line for road, power line, telephone line crossing etc. are specified.
Materials for one line D.P. for 3 phase 11 KV line are specified.
Contractor shall employ Engineers/Tech. staff as per norms of the Govt. of Odisha.
Samples of stone, metal, chips, sand, cement, etc., must be deposited for testing and acceptance before procurement.
Mechanical, electro-mechanical, and electrical materials are to be inspected at the principal manufacturer's site before dispatch.
All materials supplied by the contractor should be procured from Odisha firms and approved by the Engineer-in-charge.
UPVC Pipe, HDPE Pipe and other EPM rate contract items must be procured from EPM registered firms of Govt. of Odisha with Pre & Post inspection Certificates from CIPET authority.
UPVC pipes must bear ISI mark and CIPET testing certificate from Odisha firms.
Materials supplied must conform to the latest ISI/CPRI specifications, or specifications made by the Executive Engineer.
Bricks should be well burnt, of good quality, approved by the site Engineer, and confirm to the minimum strength as per National Building Code.

Source: Original DTCNView source document

Contract conditions

31 items

The completion period for each project is 90 days from the date of issue of the work order.
The validity of the offer is 180 days from the date of opening of the Financial Bids.
Successful bidders must register under the state PWD before signing the agreement if registered under other State Govt./M.E.S./Railways/CPWD.

Show 28 more

Conditional tenders or tenders with extraneous conditions will be rejected.
All taxes, cess, royalties, income taxes, surcharges, and labour cess will be borne by the bidder; only GST will be paid extra.
The contractor is liable to pay compensation at 0.5% of the estimated cost for every week of delay in uncommenced or unfinished work, up to a maximum of 10% of the estimated cost.
If the contractor fails to meet progress milestones (1/4th work by 1/4th time, 1/2 work by 1/2 time, 3/4th work by 3/4th time), compensation of 0.3% of the estimated cost per week of delay will be applied, not exceeding 10% of the estimated cost.
The contract may be rescinded if compensation exceeds 10% of the estimated cost, with a 20% penalty on the value of left-over work.
The contractor must submit a work plan at the time of agreement execution.
No claim for idle labour/machinery/equipment will be entertained.
The contract work should not be sublet; doing so may lead to rescission of the contract.
The authority reserves the right to increase or decrease quantities of work items; no compensation will be given for this, except for time extension if necessary.
The work may be split and distributed among several contractors; no compensation will be given for this.
The contractor is liable to fully indemnify the Department for any compensation under the Workmen's Compensation Act VII of 1993.
The contractor must abide by fair wages clauses and not pay less than the Government-fixed fair wages.
No compensation will be paid for damage due to natural calamities.
No extra payment will be made for extra items or quantities unless a written order is obtained and rates are settled beforehand.
The contractor must abide by CPWD safety code rules.
The contractor is responsible for all incidental charges, including rent, royalties, taxes, ferry tolls, conveyance, labour camps, water supply, fees, equipment, fencing, and compensation for injury.
Royalties for materials used will be recovered from the bill.
All preliminary works (GSTs, mixing platforms) are at the contractor's cost.
After work completion, all surplus materials and debris must be removed from 100 meters clear of the site.
The contractor must arrange necessary tools and plants at his own cost.
Interest is not chargeable for dues or additional dues.
The contractor is responsible for protecting men, machinery, materials, and work in progress against damages.
Dewatering from foundations is at the contractor's cost.
Quantities for items with quoted rates more than 25% of estimated rates cannot be varied by more than 5% without competent authority approval.
Any defects occurring within 18 months of commissioning must be rectified by the contractor within 7 days.
The tenderer must sign each page of the tender paper.
Damage to government or private property during pipeline work will be compensated by the contractor.
Payment will be made after completion of work, handing over of electric line and substation to TPNODL, and completion of all formalities with TPNODL.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Costs

Estimated value

₹27,50,442

₹27.50 lakh

EMD / bid security

₹27,504

Exemption available for eligible bidders

Tender fee

₹7,080

Cost of bid document

Bid validity: 90 days

Security & deductions from the DTCN (13)

SC/ST contractors can avail EMD exemption if they furnish an affidavit stating they have not been awarded a minimum of 3 works during the current financial year.
EMD is 1% of the Estimated Cost, to be deposited online.
EMD will be forfeited if the successful bidder fails to execute the agreement or furnish the required Performance Security within the specified time limit.
If any submitted documents are found false/fabricated/bogus, the bidder will be blacklisted and EMD forfeited.
Additional Performance Security (APS) will be obtained on an incremental basis if the accepted bid price is lower than the Cost Put to Tender, as per the specified rounding off percentage less (ROPL) calculation.
APS is not required if ROPL is up to (-)10%.
APS calculation varies for ROPL below (-)10% but not below (-)20%, below (-)20% but not below (-)30%, and below (-)30% or more.
APS shall be treated as part of the performance security and is not applicable to Turnkey Tenders.
APS will be refunded immediately on successful completion of the work within 7 days of issuance of Completion Certificate/Provisional Completion Certificate.
The successful Tenderer must execute an agreement in P.W.D. F2 Contract form within 7 days after receipt of Letter of Intimation, with a 1% ISD value in specified forms.
Income tax and surcharge will be deducted from each running account bill.
Labour Cess (currently 1%) will be deducted from the contractor's bill.
Security deposit of 5% of the bill will be deducted and refunded after 18 months from handing over, subject to final bill payment.

Source: Original DTCN

Frequently asked questions

PKG55

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

PKG55

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more