What is the last date to bid for this tender?

Bids must be submitted on the Odisha eProcurement portal (tendersodisha.gov.in) by 10 Nov 2026, 05:00 PM. Bids are scheduled to open on 11 Nov 2026, 11:00 AM.

What is the estimated value of this tender?

The estimated tender value is ₹1.21 Cr (₹1,20,75,271).

How much EMD is required?

The EMD (bid security) is ₹1.21 L (₹1,20,753). The portal lists EMD exemption as available for eligible bidders — check the DTCN for who qualifies.

Who can bid for this tender?

The DTCN states: Contractors must be registered with the State Government or equivalent grade/class with Central Government/M.E.S./Railways/C.P.W.D. for Civil Works; Contractors must have a valid Civil license of requisite class ("B" or "A" with HT License) as per the Tender Call Notice, with validity for at least 1 month from the tender opening date.

What work experience is required?

As extracted from the DTCN: Contractors must have satisfactorily completed (not less than 80% of original contract value) at least one similar work of not less than 40% of the proposed contract value in the last 5 years; A weightage of 10% per year shall be given to the cost of satisfactorily completed works of previous years to bring them to the current price level.

What is the completion period?

The period of work is 120 days, and bids must remain valid for 365 days.

Which department issued this tender?

This tender was issued by Orissa Lift Irrigation Corporation, LI Southern Circle Berhampur, LI Division Boudh; the tender inviting authority is the EXECUTIVE ENGINEER L.I. DIVISION BOUDH.

What documents are required to submit a bid?

The DTCN lists 12 documents, including Online payment transaction receipts/over the counter receipts for tender paper cost and EMD, Valid Civil License, Valid Electrical (H.T) License issued by ELBO, Valid GSTIN certificate, Valid PAN issued by I.T. department, Valid joint venture agreement (Registered), if applicable, and 6 more.

OtherLive

INSTALLATION AND ENERGISATION OF KANTAMAL-VI , KANTAMAL-VII AND KANTAMAL-VIII LIFT IRRIGATION PROJECT UNDER KANTAMAL BLOCK IN BOUDH DISTRICT UNDER BKVY-RIDF-2026-27

BOUDH, Boudh Orissa Lift Irrigation CorporationLI Division Boudh

Tender ID 2026_OLIC_143593_1Ref OLIC-BOUDH-OLT-03/2026-27/5075 DT-13.10.2026

Estimated value: ₹1.21 Cr
EMD: ₹1.21 L; Exemption available
Tender fee: ₹11.8K
Work period: 120 days

Closing in

7 days left

10 Nov 2026, 05:00 PM

About this tender

Orissa Lift Irrigation Corporation has invited bids for “INSTALLATION AND ENERGISATION OF KANTAMAL-VI , KANTAMAL-VII AND KANTAMAL-VIII LIFT IRRIGATION PROJECT UNDER KANTAMAL BLOCK IN BOUDH DISTRICT UNDER BKVY-RIDF-2026-27” in BOUDH, Boudh district, Odisha. The estimated tender value is ₹1.21 crore and the completion period is 120 days. Bids must be submitted by 10 Nov 2026, 05:00 PM.

Bid readiness

Based on the tender, not your profile

Done: Tender is currently open
Done: BOQ available · 71 items
Done: DTCN analysed · 53 requirements extracted
Done: 12 required documents identified
Needs review: Experience requirement needs review
Needs review: Financial requirements need review

Review requirements

Important dates

All times IST, as published on the portal

Published21 Oct 2026, 11:00 AM
Document downloadUntil 10 Nov 2026
Submission deadline· 7 days left10 Nov 2026, 05:00 PM
Bid opening11 Nov 2026, 11:00 AM

Tender intelligence

Eligibility & bid requirements

DTCN analysed53 requirements extracted12 documents identifiedExtracted from the official tender document

The Department of Water Resources, Odisha, invites bids for the installation and energization of 61 new River Lift Irrigation Projects (28 packages) in Boudh and Kantamal Blocks, Boudh District. The estimated cost for individual packages ranges from Rs. 68.031 Lakhs to Rs. 138.772 Lakhs. Contractors must be registered with the State Government or equivalent Central Government bodies and possess valid Civil and HT Licenses, or bid as a registered joint venture.

Eligibility

7 items

Contractors must be registered with the State Government or equivalent grade/class with Central Government/M.E.S./Railways/C.P.W.D. for Civil Works.
Contractors must have a valid Civil license of requisite class ("B" or "A" with HT License) as per the Tender Call Notice, with validity for at least 1 month from the tender opening date.
Contractors must have a valid H.T. License issued by ELBO, with validity for at least 1 month from the tender opening date.

Show 4 more

If a contractor has only a Civil or Electrical License, they must form a joint venture with another contractor, and the joint venture agreement must be registered in any registration office/Executive Magistrate.
Joint Venture Agreement must be registered at the Sub-Register/District Registration Office as per the provision of Registration Act 1908 and be specific to the current Bid Identification No., with an agreement period of not less than 18 months.
Contractors must have a valid GST Registration certificate.
Contractors must have a valid PAN issued by I.T. Department.

Source: Original DTCNView source document

Experience

2 items

Contractors must have satisfactorily completed (not less than 80% of original contract value) at least one similar work of not less than 40% of the proposed contract value in the last 5 years.
A weightage of 10% per year shall be given to the cost of satisfactorily completed works of previous years to bring them to the current price level.

Source: Original DTCNView source document

Financial

6 items

The bid security (EMD) is 1% of the estimated cost and must be deposited online.
If a bidder withdraws or modifies their bid before the validity period, the EMD/ISD will be forfeited.
The successful tenderer shall deposit 1% of the accepted tendered amount as Initial Security Deposit (ISD) within 7 days from the date of issue of the letter of intent.

Show 3 more

Additional Performance Security (APS) will be taken on an incremental basis for low bid prices, calculated based on the Rounding Off of Percentage Less (ROPL) of the accepted Bid Price compared to the Cost Put to Tender.
APS is refunded immediately on successful completion of the work within seven days of issuance of Completion Certificate/Provisional Completion Certificate.
The security deposit amount will be refunded only after the completion of the 18-month guarantee period to the satisfaction of the Executive Engineer.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

24 items

SC/ST Contractors, Engineer Contractors, or Physically Handicapped Contractors having both Civil & Electrical Licenses in their name may be allowed Price Preference & Other Financial benefits as per OPWD Code.
The work involves installation and energization of 61 New River Lift Irrigation Projects, including supply of materials and labor.
Contractors must erect H.T, L.T. lines, commission Sub-Stations with all required materials, and hand over to Boudh after inspection by the Electrical Inspector.

Show 21 more

Power supply work must be done as per REC specification and sanctioned estimate provided by TPSODL, Boudh.
The project must be handed over to the concerned Pani Panchayat after completion of entire works and successful trial run.
All construction works (Pump Chamber, Fixed foundation, Distribution Tank, ARV Tank, Butterfly Valve Tank, Supporting Pillar, HDPE Pipe Line, Road Crossing) must be executed as per enclosed specifications and Engineer-in-Charge's direction.
Materials supplied must conform to relevant latest editions of BIS/REC Construction standards or specifications by OLIC.
The contractor must furnish necessary certificates for material quality.
HDPE pipe (160mm, 200mm, 250mm dia) must conform to IS-4985/2000 and bear ISI Mark, with specific gravity of 1.4 to 1.46 Gms/CC and 6 Mt. length.
Both pre-delivery and post-delivery test reports by CIPET, Odisha, are required for HDPE Pipe.
G.I. pipe must conform to IS-1239 (Pt 1/2004) and be ISI certified.
Pump sets must be 3 Phase Mono Block squirrel cage induction and centrifugal type (with bronze impeller) having discharge 28 LPS at various heads, with BEE specification and energy efficiency.
Control panel starters must be Auto-Star delta type suitable for 10 HP to 15 HP motors, with overload and single phasing preventer, Volt Meter, Amper Meter & MCB.
PVC insulated (heavy duty) armored aluminum cable must conform to IS-1554(Part 1)/1988 for 1100 Volts.
PVC copper wire for connections must conform to IS 694, be multi-strand 4 mm2 size, and for 1100 Volt operation.
Main switch must conform to IS-4064/Part I & II with ISI Mark, Triple pole & neutral, 440 Volt, 63 AMP or 100 AMP.
G.I. Fittings must conform to respective IS standards.
C.I. Foot Valve/NR Valve/Sluice Valve must conform to respective IS standards (e.g., IS4038/1979 for C.I. Foot Valve).
C.I. Air Release Valve must conform to IS 14845 with ISI mark.
HDPE Fittings must conform to IS 4985/2000 with ISI Mark.
Electrical construction works (11 KV HT Line, 25 KVA/63 KVA Sub-Station, 3 Phase 4 Wire LT Line with AB Cable) must be executed as per REC standard and TPSODL, Boudh sanctioned estimate.
The transformer installed must be tested by an approved authority before commissioning, and a successful test report, along with the manufacturer's test certificate, must be submitted.
The contractor must arrange for inspection by the Electrical Inspector/Deputy Electrical Inspector/competent authority of TPSODL, Boudh, and obtain approval for charging the Sub-Station.
The contractor must liaise with TPSODL, Boudh, for execution of agreement of Pani Panchayat, shut down, connection, charging of S/S, and handing over.

Source: Original DTCNView source document

Contract conditions

14 items

The period of completion for all projects is 120 days from the date of issue of the work order.
The last date for seeking clarification is 04-11-2026 at 17:00 Hrs.
Technical bids will be opened on 11-11-2026 at 11:00 Hrs.

Show 11 more

The bids shall remain open for acceptance for a period of 365 days from the last date of receipt of bids.
The successful lowest bidder must submit originals of all scanned documents within 5 days from the bid opening date for verification.
If more than one bidder is L1 (quoting less than or equal to estimated cost), the tender will be decided through a transparent lottery system.
The contractor must quote the Percentage Rate excess or less up to two digits only after the decimal point.
Failure to produce original documents by the successful bidder will result in debarment for three years and blacklisting.
The successful tenderer must execute agreements with the Executive Engineer, L.I. Division, Boudh, within 7 days from the date of issue of the letter of intent.
The agreement period for Joint Venture must not be less than 18 months.
The contractor must furnish a guarantee that all work items are free from defects for a period of not less than 18 months from the date of handing over the project.
Payment to the contractor will be made on a "First & Final bill" basis after successful trial and handing over of the project.
Compensation for delay will be ½ percent on the estimated cost for every day the work remains uncompleted, not exceeding 10 percent of the estimated cost.
The contractor is responsible for all taxes including GST, Income Tax, Royalty, fair weather charges, and Labour cess.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Bill of quantities

71 priced items · ₹1.21 Cr (₹1,20,75,271)

Download BOQ file

Major components

Share of BOQ amount, grouped by item description

Plumbing & water supply61%₹74.18 L
Electrical11%₹13.80 L
Earthwork & excavation7%₹8.06 L
Concrete & RCC3%₹3.73 L
Masonry3%₹3.31 L
Reinforcement steel2%₹2.23 L

Largest items

By amount

Cost of 200 mm Ø HDPE Pipe PE-80 PN-04 to deliver water at highest counterItem 47 · 3,030 Mtr₹25.04 L
Cost of 160 mm Ø HDPE Pipe PE-80 PN-04 to deliver water at highest counterItem 50 · 3,317 Mtr₹17.75 L
Supplying all materials, labour, T&P for jointing of 200 mm outer dia High Density Polythylene Pipes of speci…Item 49 · 3,030 Mtr₹13.39 L
Cost of 11/0.4 KV 25 KVA Transformer (BIS Energy level -II) DPM S/S ( 10 Mtr PSC Pole with Masonary Boundary…Item 70 · 3 No₹12.58 L
Supplying all materials, labour, T&P for jointing of 160 mm outer dia High Density Polythylene Pipes of speci…Item 52 · 3,317 Mtr₹10.68 L

Tender details

Tender reference: OLIC-BOUDH-OLT-03/2026-27/5075 DT-13.10.2026
Tender ID: 2026_OLIC_143593_1
District: Boudh
Location: BOUDH
Tender type: Open Tender
Tender category: Works
Period of work: 120 days

Show all 9 fields

Product category: Civil Works - Lift Irrigation Schemes
Pincode: 762014

Authority

State
Government of Odisha
Department
Orissa Lift Irrigation Corporation
Organisation
LI Southern Circle Berhampur
Office
LI Division Boudh
Inviting authority
EXECUTIVE ENGINEER L.I. DIVISION BOUDH

All Orissa Lift Irrigation Corporation tenders in Boudh →

Costs

Estimated value: ₹1,20,75,271; ₹1.21 crore
EMD / bid security: ₹1,20,753; Exemption available for eligible bidders
Tender fee: ₹11,800; Cost of bid document

Bid validity: 365 days

Security & deductions from the DTCN (6)

The bid security (EMD) is 1% of the estimated cost and must be deposited online.
If a bidder withdraws or modifies their bid before the validity period, the EMD/ISD will be forfeited.
The successful tenderer shall deposit 1% of the accepted tendered amount as Initial Security Deposit (ISD) within 7 days from the date of issue of the letter of intent.
Additional Performance Security (APS) will be taken on an incremental basis for low bid prices, calculated based on the Rounding Off of Percentage Less (ROPL) of the accepted Bid Price compared to the Cost Put to Tender.
APS is refunded immediately on successful completion of the work within seven days of issuance of Completion Certificate/Provisional Completion Certificate.
The security deposit amount will be refunded only after the completion of the 18-month guarantee period to the satisfaction of the Executive Engineer.

Source: Original DTCN

Frequently asked questions

About this tender

Eligibility & bid requirements

DTCN analysed53 requirements extracted12 documents identifiedExtracted from the official tender document

Eligibility

7 items

Contractors must be registered with the State Government or equivalent grade/class with Central Government/M.E.S./Railways/C.P.W.D. for Civil Works.
Contractors must have a valid Civil license of requisite class ("B" or "A" with HT License) as per the Tender Call Notice, with validity for at least 1 month from the tender opening date.
Contractors must have a valid H.T. License issued by ELBO, with validity for at least 1 month from the tender opening date.

Show 4 more

If a contractor has only a Civil or Electrical License, they must form a joint venture with another contractor, and the joint venture agreement must be registered in any registration office/Executive Magistrate.
Joint Venture Agreement must be registered at the Sub-Register/District Registration Office as per the provision of Registration Act 1908 and be specific to the current Bid Identification No., with an agreement period of not less than 18 months.
Contractors must have a valid GST Registration certificate.
Contractors must have a valid PAN issued by I.T. Department.

Source: Original DTCNView source document

Experience

2 items

Contractors must have satisfactorily completed (not less than 80% of original contract value) at least one similar work of not less than 40% of the proposed contract value in the last 5 years.
A weightage of 10% per year shall be given to the cost of satisfactorily completed works of previous years to bring them to the current price level.

Source: Original DTCNView source document

Financial

6 items

The bid security (EMD) is 1% of the estimated cost and must be deposited online.
If a bidder withdraws or modifies their bid before the validity period, the EMD/ISD will be forfeited.
The successful tenderer shall deposit 1% of the accepted tendered amount as Initial Security Deposit (ISD) within 7 days from the date of issue of the letter of intent.

Show 3 more

Additional Performance Security (APS) will be taken on an incremental basis for low bid prices, calculated based on the Rounding Off of Percentage Less (ROPL) of the accepted Bid Price compared to the Cost Put to Tender.
APS is refunded immediately on successful completion of the work within seven days of issuance of Completion Certificate/Provisional Completion Certificate.
The security deposit amount will be refunded only after the completion of the 18-month guarantee period to the satisfaction of the Executive Engineer.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

24 items

SC/ST Contractors, Engineer Contractors, or Physically Handicapped Contractors having both Civil & Electrical Licenses in their name may be allowed Price Preference & Other Financial benefits as per OPWD Code.
The work involves installation and energization of 61 New River Lift Irrigation Projects, including supply of materials and labor.
Contractors must erect H.T, L.T. lines, commission Sub-Stations with all required materials, and hand over to Boudh after inspection by the Electrical Inspector.

Show 21 more

Power supply work must be done as per REC specification and sanctioned estimate provided by TPSODL, Boudh.
The project must be handed over to the concerned Pani Panchayat after completion of entire works and successful trial run.
All construction works (Pump Chamber, Fixed foundation, Distribution Tank, ARV Tank, Butterfly Valve Tank, Supporting Pillar, HDPE Pipe Line, Road Crossing) must be executed as per enclosed specifications and Engineer-in-Charge's direction.
Materials supplied must conform to relevant latest editions of BIS/REC Construction standards or specifications by OLIC.
The contractor must furnish necessary certificates for material quality.
HDPE pipe (160mm, 200mm, 250mm dia) must conform to IS-4985/2000 and bear ISI Mark, with specific gravity of 1.4 to 1.46 Gms/CC and 6 Mt. length.
Both pre-delivery and post-delivery test reports by CIPET, Odisha, are required for HDPE Pipe.
G.I. pipe must conform to IS-1239 (Pt 1/2004) and be ISI certified.
Pump sets must be 3 Phase Mono Block squirrel cage induction and centrifugal type (with bronze impeller) having discharge 28 LPS at various heads, with BEE specification and energy efficiency.
Control panel starters must be Auto-Star delta type suitable for 10 HP to 15 HP motors, with overload and single phasing preventer, Volt Meter, Amper Meter & MCB.
PVC insulated (heavy duty) armored aluminum cable must conform to IS-1554(Part 1)/1988 for 1100 Volts.
PVC copper wire for connections must conform to IS 694, be multi-strand 4 mm2 size, and for 1100 Volt operation.
Main switch must conform to IS-4064/Part I & II with ISI Mark, Triple pole & neutral, 440 Volt, 63 AMP or 100 AMP.
G.I. Fittings must conform to respective IS standards.
C.I. Foot Valve/NR Valve/Sluice Valve must conform to respective IS standards (e.g., IS4038/1979 for C.I. Foot Valve).
C.I. Air Release Valve must conform to IS 14845 with ISI mark.
HDPE Fittings must conform to IS 4985/2000 with ISI Mark.
Electrical construction works (11 KV HT Line, 25 KVA/63 KVA Sub-Station, 3 Phase 4 Wire LT Line with AB Cable) must be executed as per REC standard and TPSODL, Boudh sanctioned estimate.
The transformer installed must be tested by an approved authority before commissioning, and a successful test report, along with the manufacturer's test certificate, must be submitted.
The contractor must arrange for inspection by the Electrical Inspector/Deputy Electrical Inspector/competent authority of TPSODL, Boudh, and obtain approval for charging the Sub-Station.
The contractor must liaise with TPSODL, Boudh, for execution of agreement of Pani Panchayat, shut down, connection, charging of S/S, and handing over.

Source: Original DTCNView source document

Contract conditions

14 items

The period of completion for all projects is 120 days from the date of issue of the work order.
The last date for seeking clarification is 04-11-2026 at 17:00 Hrs.
Technical bids will be opened on 11-11-2026 at 11:00 Hrs.

Show 11 more

The bids shall remain open for acceptance for a period of 365 days from the last date of receipt of bids.
The successful lowest bidder must submit originals of all scanned documents within 5 days from the bid opening date for verification.
If more than one bidder is L1 (quoting less than or equal to estimated cost), the tender will be decided through a transparent lottery system.
The contractor must quote the Percentage Rate excess or less up to two digits only after the decimal point.
Failure to produce original documents by the successful bidder will result in debarment for three years and blacklisting.
The successful tenderer must execute agreements with the Executive Engineer, L.I. Division, Boudh, within 7 days from the date of issue of the letter of intent.
The agreement period for Joint Venture must not be less than 18 months.
The contractor must furnish a guarantee that all work items are free from defects for a period of not less than 18 months from the date of handing over the project.
Payment to the contractor will be made on a "First & Final bill" basis after successful trial and handing over of the project.
Compensation for delay will be ½ percent on the estimated cost for every day the work remains uncompleted, not exceeding 10 percent of the estimated cost.
The contractor is responsible for all taxes including GST, Income Tax, Royalty, fair weather charges, and Labour cess.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Costs

Estimated value

₹1,20,75,271

₹1.21 crore

EMD / bid security

₹1,20,753

Exemption available for eligible bidders

Tender fee

₹11,800

Cost of bid document

Bid validity: 365 days

Security & deductions from the DTCN (6)

The bid security (EMD) is 1% of the estimated cost and must be deposited online.
If a bidder withdraws or modifies their bid before the validity period, the EMD/ISD will be forfeited.
The successful tenderer shall deposit 1% of the accepted tendered amount as Initial Security Deposit (ISD) within 7 days from the date of issue of the letter of intent.
Additional Performance Security (APS) will be taken on an incremental basis for low bid prices, calculated based on the Rounding Off of Percentage Less (ROPL) of the accepted Bid Price compared to the Cost Put to Tender.
APS is refunded immediately on successful completion of the work within seven days of issuance of Completion Certificate/Provisional Completion Certificate.
The security deposit amount will be refunded only after the completion of the 18-month guarantee period to the satisfaction of the Executive Engineer.

Source: Original DTCN

Frequently asked questions

INSTALLATION AND ENERGISATION OF KANTAMAL-VI , KANTAMAL-VII AND KANTAMAL-VIII LIFT IRRIGATION PROJECT UNDER KANTAMAL BLOCK IN BOUDH DISTRICT UNDER BKVY-RIDF-2026-27

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

INSTALLATION AND ENERGISATION OF KANTAMAL-VI , KANTAMAL-VII AND KANTAMAL-VIII LIFT IRRIGATION PROJECT UNDER KANTAMAL BLOCK IN BOUDH DISTRICT UNDER BKVY-RIDF-2026-27

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more