What is the last date to bid for this tender?

Bids must be submitted on the Odisha eProcurement portal (tendersodisha.gov.in) by 30 Oct 2026, 05:00 PM. Bids are scheduled to open on 31 Oct 2026, 11:00 AM.

What is the estimated value of this tender?

The estimated tender value is ₹1.61 Cr (₹1,61,01,000).

How much EMD is required?

The EMD (bid security) is ₹1.61 L (₹1,61,010). The portal lists EMD exemption as available for eligible bidders — check the DTCN for who qualifies.

Who can bid for this tender?

The DTCN states: Contractors must be registered with the State Governments as Class 'B' & 'A' or equivalent grade/class registered with Central Government/MES/Railways; The intending tenderer(s) should not have abandoned any work of similar nature, nor should their contract have been rescinded during the last five years.

What work experience is required?

As extracted from the DTCN: For works valued more than Rs 5.00 crores, bidders must have executed similar nature of work worth 75% of the estimated cost in any three financial years of the last five preceding financial years (2021-22 to 2025-26, excluding 2026-27).

What is the completion period?

The period of work is 180 days, and bids must remain valid for 90 days.

Which department issued this tender?

This tender was issued by CE RW I, RWCIRCLE-BARIPADA; the tender inviting authority is the Circle Officer.

What documents are required to submit a bid?

The DTCN lists 18 documents, including Cost of Tender Paper (Online), EMD (Online), Valid Registration Certificate, GSTIN, No Relationship Certificate (Schedule-A), Works Experience (Schedule-D1), and 12 more.

BridgeClosed

Construction of Weir on Bridge over Thunta River at Balarampur Village

SERW Division, Karanjia, Mayurbhanj CE RW IRWCIRCLE-BARIPADA

Tender ID 2026_CERWI_143724_1Ref NCB430

Estimated value: ₹1.61 Cr
EMD: ₹1.61 L; Exemption available
Tender fee: ₹10.0K
Work period: 180 days

Bid submission

Closed

Closed on 30 Oct 2026, 05:00 PM

Bid submission for this tender has closed. Browse closed tenders in the archive →

About this tender

CE RW I has invited bids for “Construction of Weir on Bridge over Thunta River at Balarampur Village” in SERW Division, Karanjia, Mayurbhanj district, Odisha. The estimated tender value is ₹1.61 crore and the completion period is 180 days. Bids must be submitted by 30 Oct 2026, 05:00 PM.

Bid readiness

Based on the tender, not your profile

Not available: Bid submission has closed
Done: BOQ available · 16 items
Done: DTCN analysed · 43 requirements extracted
Done: 18 required documents identified
Needs review: Experience requirement needs review
Needs review: Financial requirements need review

Review requirements

Important dates

All times IST, as published on the portal

Published15 Oct 2026, 06:55 PM
Document downloadUntil 30 Oct 2026
Submission deadline30 Oct 2026, 05:00 PM
Bid opening31 Oct 2026, 11:00 AM

Tender intelligence

Eligibility & bid requirements

DTCN analysed43 requirements extracted18 documents identifiedExtracted from the official tender document

This tender is for the construction of a weir adjacent to a bridge over the Thunta river at Balarampur Village Road in Mayurbhanj, Odisha, with an estimated cost of Rs. 161.01 Lakhs. The project has a completion period of 6 calendar months. Contractors of Class 'B' & 'A' are eligible to bid, and a key requirement is demonstrating experience in similar nature of work and meeting specific annual turnover and bid capacity criteria.

Eligibility

6 items

Contractors must be registered with the State Governments as Class 'B' & 'A' or equivalent grade/class registered with Central Government/MES/Railways.
The intending tenderer(s) should not have abandoned any work of similar nature, nor should their contract have been rescinded during the last five years.
Bidders must furnish a 'No Relationship Certificate' stating no relation to any officer of Assistant Engineer rank or above in the R.D. Dept. or Assistant/Under Secretary or above in the R.D. Department.

Show 3 more

Bidders must possess a valid Registration Certificate, up-to-date GSTIN Certificate, and PAN Card.
Joint Ventures are allowed for works exceeding Rs 10.00 crore, with not more than three constituents, and the lead partner must be a registered contractor of appropriate class.
Individual registered contractors belonging to Schedule Caste and Schedule Tribe with Registration Certificate up to 'B' Class are eligible for 10% price preference.

Source: Original DTCNView source document

Experience

1 item

For works valued more than Rs 5.00 crores, bidders must have executed similar nature of work worth 75% of the estimated cost in any three financial years of the last five preceding financial years (2021-22 to 2025-26, excluding 2026-27).

Source: Original DTCNView source document

Financial

6 items

Bidders must have a total financial turnover in Civil Engineering works of an amount not less than the estimated cost in any three financial years of the last five preceding financial years (2021-22 to 2025-26, excluding 2026-27), certified by a Chartered Accountant.
The available bid capacity must be more than the total estimated cost of the works.
EMD is 1% of the estimated cost (Rs. 1,61,010.00), to be remitted online.

Show 3 more

Additional Performance Security will be obtained if the bid amount is below the estimated cost, with varying percentages based on the bid price deviation.
Prevailing percentage of Income Tax and TDS on GST will be deducted from the contractor’s bill.
CESS @ 1% of the amount of each bill shall be proportionately deducted.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

16 items

Super Class contractors must employ two Graduate Engineers and two Diploma Holders from Odisha.
Special Class contractors must employ one Graduate Engineer and two Diploma Holders from Odisha.
'A' Class contractors must employ one Graduate Engineer or two Diploma Holders from Odisha.

Show 13 more

Bidders must possess a Hydraulic Excavator (1 no.), a Self-loading Concrete Mixer with batch mix arrangement (1 no.), and a Generator – 33 KVA (1 no.), either owned or on hire/lease.
Proof of ownership of tools & plants and machineries must be furnished via invoices, sale deeds, or lease deeds with lessor's ownership documents.
Contractors must submit a time schedule for movement of equipment/machinery from one site to the tendered work site if executing several works.
Hired/leased equipment/machineries require proof of ownership from the provider, along with contracts/agreements/lease deeds for a minimum period equal to the intended completion period plus 90 days.
Steel shuttering & centering must be used, lined with suitable sheeting, and made leak-proof and water-tight.
Concrete must be machine mixed unless otherwise ordered, and the contractor must arrange their own concrete mixer, vibrator, and pumps.
Cement shall be used by bags, with one bag weighing 50 Kg.
Contractors must arrange materials like Steel, Cement, paint, and bitumen of approved quality and specification, and get them tested and approved by the Department.
All reinforced cement concrete work should conform to IRC Code and Bridge Code section I, II, III, IV and VII & latest design criteria for prestressed concrete bridges specifically for road and bridges issued by MoSRT&H, Govt. of India.
MoSRT&H Specification for Road & Bridge work (Latest Revision) shall be the guiding book for execution, quality assurance, specification and measurement for all items of Road & Bridge works.
The contractor must conduct trial boring and get samples tested at their own cost to ascertain SBC and credibility of strata at founding level.
The contractor shall supply samples of all materials for testing and acceptance before procurement.
The contractor shall employ one or more Engineering Graduate or Diploma holders as apprentice at his cost if the work exceeds Rs.2,50,000/-.

Source: Original DTCNView source document

Contract conditions

14 items

The intended completion period for the work is 6 Calendar Months.
Bids will remain valid for 90 days after the deadline for submission.
The minimum period of contract/agreement/lease deed for equipment and machineries is 9 calendar months.

Show 11 more

If the L1 bidder fails to turn up for agreement, they will be debarred from bidding for three years and blacklisted; the L2 bidder may be considered if they negotiate at par with the L1 bid.
Failure to furnish original documents for verification, backing out from the bid, or failing to execute the agreement will result in blocking of portal registration for a minimum of 180 days and potential blacklisting.
Price adjustment will apply for work done up to the initial intended completion date or approved extensions, but not for delays attributable to the contractor.
The defect liability period for the work is 24 calendar months from the date of successful completion.
The contractor is responsible for making good all injuries, damages, and repairs, and will not be compensated for losses due to natural calamities or incidental damages.
GST as applicable on works contract shall be paid over the bill amount at the time of payment.
Royalty, EMF, DMF, and additional charges for minor minerals must be paid by the contractor, and proof of payment submitted with bills, or the amount will be recovered.
No interest is chargeable for dues or additional dues.
The contractor must obtain a valid license from licensing authorities of the labour department under Section 12 of the Contractor’s Labour (Regulation and Abolition) Act, 1970.
The contractor shall not employ child labour.
The rates quoted by the contractor shall be excluding GST, and GST as applicable will be paid on the bill amount.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Bill of quantities

16 priced items · ₹1.61 Cr (₹1,61,00,789)

Download BOQ file

Major components

Share of BOQ amount, grouped by item description

Concrete & RCC23%₹36.49 L
Reinforcement steel18%₹29.00 L
Earthwork & excavation4%₹6.87 L
Plaster, paint & finishing0%₹6.8K
Other items55%₹88.58 L

Largest items

By amount

Providing Rough stone dry packing in aprons & revetment with h.g.stone of approved quality and size including…Item 11 · 2,192.61 cum₹87.81 L
S&F in position MS / High yield deformed bars, reinforcement with cutting ,beding, binding, straightening and…Item 8 · 297.06 qtl₹28.91 L
Providing R.C.C. M-30 in raft with stone aggregates of required size & approved quality including laying conc…Item 6 · 248.07 cum₹20.31 L
Providing R.C.C. M-30 in Sub-structure with stone aggregates of required size & approved quality including la…Item 7 · 45.4 cum₹7.10 L
Providing R.C.C. M-30 in Cut off including de-watering with stone aggregates of required size & approved qual…Item 5 · 36.45 cum₹5.72 L

Tender details

Tender reference: NCB430
Tender ID: 2026_CERWI_143724_1
District: Mayurbhanj
Location: SERW Division, Karanjia
Tender type: National Competitive Bid
Tender category: Works
Period of work: 180 days

Show all 9 fields

Product category: Civil Works - Bridges
Pincode: 757037

Authority

State
Government of Odisha
Department
CE RW I
Organisation
RWCIRCLE-BARIPADA
Inviting authority
Circle Officer

All CE RW I tenders in Mayurbhanj →

Costs

Estimated value: ₹1,61,01,000; ₹1.61 crore
EMD / bid security: ₹1,61,010; Exemption available for eligible bidders
Tender fee: ₹10,000; Cost of bid document

Bid validity: 90 days

Security & deductions from the DTCN (4)

EMD is 1% of the estimated cost (Rs. 1,61,010.00), to be remitted online.
Additional Performance Security will be obtained if the bid amount is below the estimated cost, with varying percentages based on the bid price deviation.
Prevailing percentage of Income Tax and TDS on GST will be deducted from the contractor’s bill.
CESS @ 1% of the amount of each bill shall be proportionately deducted.

Source: Original DTCN

Frequently asked questions

Eligibility & bid requirements

DTCN analysed43 requirements extracted18 documents identifiedExtracted from the official tender document

Eligibility

6 items

Contractors must be registered with the State Governments as Class 'B' & 'A' or equivalent grade/class registered with Central Government/MES/Railways.
The intending tenderer(s) should not have abandoned any work of similar nature, nor should their contract have been rescinded during the last five years.
Bidders must furnish a 'No Relationship Certificate' stating no relation to any officer of Assistant Engineer rank or above in the R.D. Dept. or Assistant/Under Secretary or above in the R.D. Department.

Show 3 more

Bidders must possess a valid Registration Certificate, up-to-date GSTIN Certificate, and PAN Card.
Joint Ventures are allowed for works exceeding Rs 10.00 crore, with not more than three constituents, and the lead partner must be a registered contractor of appropriate class.
Individual registered contractors belonging to Schedule Caste and Schedule Tribe with Registration Certificate up to 'B' Class are eligible for 10% price preference.

Source: Original DTCNView source document

Experience

1 item

For works valued more than Rs 5.00 crores, bidders must have executed similar nature of work worth 75% of the estimated cost in any three financial years of the last five preceding financial years (2021-22 to 2025-26, excluding 2026-27).

Source: Original DTCNView source document

Financial

6 items

Bidders must have a total financial turnover in Civil Engineering works of an amount not less than the estimated cost in any three financial years of the last five preceding financial years (2021-22 to 2025-26, excluding 2026-27), certified by a Chartered Accountant.
The available bid capacity must be more than the total estimated cost of the works.
EMD is 1% of the estimated cost (Rs. 1,61,010.00), to be remitted online.

Show 3 more

Additional Performance Security will be obtained if the bid amount is below the estimated cost, with varying percentages based on the bid price deviation.
Prevailing percentage of Income Tax and TDS on GST will be deducted from the contractor’s bill.
CESS @ 1% of the amount of each bill shall be proportionately deducted.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

16 items

Super Class contractors must employ two Graduate Engineers and two Diploma Holders from Odisha.
Special Class contractors must employ one Graduate Engineer and two Diploma Holders from Odisha.
'A' Class contractors must employ one Graduate Engineer or two Diploma Holders from Odisha.

Show 13 more

Bidders must possess a Hydraulic Excavator (1 no.), a Self-loading Concrete Mixer with batch mix arrangement (1 no.), and a Generator – 33 KVA (1 no.), either owned or on hire/lease.
Proof of ownership of tools & plants and machineries must be furnished via invoices, sale deeds, or lease deeds with lessor's ownership documents.
Contractors must submit a time schedule for movement of equipment/machinery from one site to the tendered work site if executing several works.
Hired/leased equipment/machineries require proof of ownership from the provider, along with contracts/agreements/lease deeds for a minimum period equal to the intended completion period plus 90 days.
Steel shuttering & centering must be used, lined with suitable sheeting, and made leak-proof and water-tight.
Concrete must be machine mixed unless otherwise ordered, and the contractor must arrange their own concrete mixer, vibrator, and pumps.
Cement shall be used by bags, with one bag weighing 50 Kg.
Contractors must arrange materials like Steel, Cement, paint, and bitumen of approved quality and specification, and get them tested and approved by the Department.
All reinforced cement concrete work should conform to IRC Code and Bridge Code section I, II, III, IV and VII & latest design criteria for prestressed concrete bridges specifically for road and bridges issued by MoSRT&H, Govt. of India.
MoSRT&H Specification for Road & Bridge work (Latest Revision) shall be the guiding book for execution, quality assurance, specification and measurement for all items of Road & Bridge works.
The contractor must conduct trial boring and get samples tested at their own cost to ascertain SBC and credibility of strata at founding level.
The contractor shall supply samples of all materials for testing and acceptance before procurement.
The contractor shall employ one or more Engineering Graduate or Diploma holders as apprentice at his cost if the work exceeds Rs.2,50,000/-.

Source: Original DTCNView source document

Contract conditions

14 items

The intended completion period for the work is 6 Calendar Months.
Bids will remain valid for 90 days after the deadline for submission.
The minimum period of contract/agreement/lease deed for equipment and machineries is 9 calendar months.

Show 11 more

If the L1 bidder fails to turn up for agreement, they will be debarred from bidding for three years and blacklisted; the L2 bidder may be considered if they negotiate at par with the L1 bid.
Failure to furnish original documents for verification, backing out from the bid, or failing to execute the agreement will result in blocking of portal registration for a minimum of 180 days and potential blacklisting.
Price adjustment will apply for work done up to the initial intended completion date or approved extensions, but not for delays attributable to the contractor.
The defect liability period for the work is 24 calendar months from the date of successful completion.
The contractor is responsible for making good all injuries, damages, and repairs, and will not be compensated for losses due to natural calamities or incidental damages.
GST as applicable on works contract shall be paid over the bill amount at the time of payment.
Royalty, EMF, DMF, and additional charges for minor minerals must be paid by the contractor, and proof of payment submitted with bills, or the amount will be recovered.
No interest is chargeable for dues or additional dues.
The contractor must obtain a valid license from licensing authorities of the labour department under Section 12 of the Contractor’s Labour (Regulation and Abolition) Act, 1970.
The contractor shall not employ child labour.
The rates quoted by the contractor shall be excluding GST, and GST as applicable will be paid on the bill amount.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Costs

Estimated value

₹1,61,01,000

₹1.61 crore

EMD / bid security

₹1,61,010

Exemption available for eligible bidders

Tender fee

₹10,000

Cost of bid document

Bid validity: 90 days

Security & deductions from the DTCN (4)

EMD is 1% of the estimated cost (Rs. 1,61,010.00), to be remitted online.
Additional Performance Security will be obtained if the bid amount is below the estimated cost, with varying percentages based on the bid price deviation.
Prevailing percentage of Income Tax and TDS on GST will be deducted from the contractor’s bill.
CESS @ 1% of the amount of each bill shall be proportionately deducted.

Source: Original DTCN

Frequently asked questions

Construction of Weir on Bridge over Thunta River at Balarampur Village

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

Construction of Weir on Bridge over Thunta River at Balarampur Village

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Construction of Weir adjacent to Bridge over Mahisamunda Nallah at 1st KM on Belerisole Gojabayani Chhak to Danimara Via Bhaduasole Nedhua Road in the District of Mayurbhanj for the year 2025-26.

Construction of Weir adjacent to Bridge over Mahisamunda Nallah at 1st Km on Nadigaon Bangriposi Road in the District of Mayurbhanj for the year 2025-26.

Construction of Weir adjacent to Bridge over Bhurgi Nallah on Jualibhanga to Masarda Road in the District of Mayurbhanj for the year 2025-26.

Helpful guides

Explore more

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Major components

Largest items

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

What is the completion period?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Construction of Weir adjacent to Bridge over Mahisamunda Nallah at 1st KM on Belerisole Gojabayani Chhak to Danimara Via Bhaduasole Nedhua Road in the District of Mayurbhanj for the year 2025-26.

Construction of Weir adjacent to Bridge over Mahisamunda Nallah at 1st Km on Nadigaon Bangriposi Road in the District of Mayurbhanj for the year 2025-26.

Construction of Weir adjacent to Bridge over Bhurgi Nallah on Jualibhanga to Masarda Road in the District of Mayurbhanj for the year 2025-26.

Helpful guides

Explore more