What is the last date to bid for this tender?

Bids must be submitted on the Odisha eProcurement portal (tendersodisha.gov.in) by 26 Nov 2026, 05:00 PM. Bids are scheduled to open on 27 Nov 2026, 11:00 AM.

What is the estimated value of this tender?

The estimated tender value is ₹57.21 Cr (₹57,20,84,000).

How much EMD is required?

The EMD (bid security) is ₹57.21 L (₹57,20,900). The portal lists EMD exemption as available for eligible bidders — check the DTCN for who qualifies.

Who can bid for this tender?

The DTCN states: Contractor must be "Super" Class, registered with the Government of Odisha; if registered outside Odisha, must register in Odisha before agreement signing; Bidder/firm/company must not have been blacklisted in the last 5 financial years by any department in Govt. of Odisha or any other state/union Govt.

What work experience is required?

As extracted from the DTCN: As a prime contractor, must have satisfactorily completed (not less than 80% of original contract value) at least one similar work of Survey, Design, Supply, Execution, Installation, testing and commissioning of UGPL (Pressurised/Gravity) network in Irrigation Projects/Water Supply Project of value not less than Rs. 2288.34 Lakhs (40% of proposed Contract Value) at FY 2026-27 price level, with a 10% per year weightage for previous years; Must have completed supply, laying, jointing, testing & commissioning of MS/DI/GRP/PSC Pipes of minimum 600 mm & above diameter for a minimum length of 12.5 Km in any one year during the last five financial years including current FY.

Which department issued this tender?

This tender was issued by Kanupur Irrigation Project, CCE-Kanupur; the tender inviting authority is the Chief Construction Engineer, KIP, Basudevpur.

What documents are required to submit a bid?

The DTCN lists 27 documents, including Letter of Submission (Form A), Cost of Bid Document, EMD/Bid Security Declaration, Registration Certificate, GST Registration No., PAN, and 21 more.

OtherLive

Construction of Distribution System for 2482.16 ha. of CCA including CAD of KIP through UGPL including survey, investigation, planning, Design and Estimate O and M on complete Commissioned Project on EPC mode basis for five years in Kendujhar...

Basudevpur, Keonjhar Kanupur Irrigation ProjectCCE-Kanupur

Tender ID 2026_KPRIP_144577_1Ref CCE, KIP (KCD-I)-15/2026-27

Estimated value: ₹57.21 Cr
EMD: ₹57.21 L; Exemption available
Tender fee: ₹10.0K
Work period: —

Closing in

24 days left

26 Nov 2026, 05:00 PM

About this tender

Kanupur Irrigation Project has invited bids for “Construction of Distribution System for 2482.16 ha. of CCA including CAD of KIP through UGPL including survey, investigation, planning, Design and Estimate O and M on complete Commissioned Project on EPC mode basis for five years in Kendujhar...” in Basudevpur, Keonjhar district, Odisha. The estimated tender value is ₹57.21 crore. Bids must be submitted by 26 Nov 2026, 05:00 PM.

Bid readiness

Based on the tender, not your profile

Done: Tender is currently open
Done: BOQ available · 3 items
Done: DTCN analysed · 47 requirements extracted
Done: 27 required documents identified
Needs review: Experience requirement needs review
Needs review: Financial requirements need review

Review requirements

Important dates

All times IST, as published on the portal

Published29 Oct 2026, 10:00 AM
Document downloadUntil 26 Nov 2026
Submission deadline· 24 days left26 Nov 2026, 05:00 PM
Bid opening27 Nov 2026, 11:00 AM

Tender intelligence

Eligibility & bid requirements

DTCN analysed47 requirements extracted27 documents identifiedExtracted from the official tender document

This tender is for the Engineering, Procurement, and Construction (EPC) of an underground pipeline irrigation system for 2482.16 hectares in Kendujhar District, Odisha. The project includes survey, investigation, planning, design, estimation, and 5 years of operation and maintenance. The estimated value is Rs. 5720.84 Lakhs, and the completion period is 12 calendar months. Bidders must be "Super" Class contractors.

Eligibility

6 items

Contractor must be "Super" Class, registered with the Government of Odisha; if registered outside Odisha, must register in Odisha before agreement signing.
Bidder/firm/company must not have been blacklisted in the last 5 financial years by any department in Govt. of Odisha or any other state/union Govt.
Must possess credit facilities of not less than Rs. 1144.17 Lakhs from any Nationalized/Scheduled Commercial Bank, with the bank certificate in the prescribed format.

Show 3 more

Financial Capacity must be submitted as per Annexure VIII and IX, certified by a practicing Chartered Accountant.
Joint Ventures are acceptable with a maximum of two firms as partners, with specific rules for lead partner, liability, and collective/individual satisfaction of technical and financial capacity.
Pipe and equipment manufacturers must not have been blacklisted/debarred/disqualified/disallowed for quality issues in the last 3 years; an affidavit from the manufacturer is required.

Source: Original DTCNView source document

Experience

4 items

As a prime contractor, must have satisfactorily completed (not less than 80% of original contract value) at least one similar work of Survey, Design, Supply, Execution, Installation, testing and commissioning of UGPL (Pressurised/Gravity) network in Irrigation Projects/Water Supply Project of value not less than Rs. 2288.34 Lakhs (40% of proposed Contract Value) at FY 2026-27 price level, with a 10% per year weightage for previous years.
Must have completed supply, laying, jointing, testing & commissioning of MS/DI/GRP/PSC Pipes of minimum 600 mm & above diameter for a minimum length of 12.5 Km in any one year during the last five financial years including current FY.
Must have completed supply, laying, jointing, Testing & commissioning of HDPE/PVC minimum 110 mm & above diameter for a minimum length of 50 Km in any one year during the last five financial years including current FY.

Show 1 more

Experience certificates must be self-attested client certificates from an officer not below the rank of Divisional Engineer or equivalent authority from State Government/Central Government/UTs/State PSUs/Central PSUs projects.

Source: Original DTCNView source document

Financial

11 items

Must have achieved a minimum annual turnover of Rs. 8581.26 Lakhs (1.5 times the estimated annualized cost) in Civil Engineering Construction works only in any one financial year from FY 2021-22 to FY 2025-26, with a 10% per year weightage for previous years.
Audited Balance Sheets and Profit and Loss accounts for FY 2021-22 to FY 2025-26 must be furnished.
Available Bid Capacity must be more than Rs. 5720.84 Lakhs, calculated as (A*N*2 - B), where A is maximum turnover, N is completion years, and B is existing commitments.

Show 8 more

The EMD/Bid Security amount is Rs. 57,20,900.00, to be submitted online or via unconditional and irrevocable Bank Guarantee.
Initial Security Deposit (ISD) of 2% of the accepted amount for each part of the agreement (Work and O&M) must be deposited in NSC/Post office Saving Account/Post office Time Deposit Account/Kishan Vikas Patra/Bank Guarantee/Insurance Surety Bond.
The validity of ISD for Part-I (Work) must be for the stipulated completion period plus the defect liability period plus three months.
The validity of ISD for Part-II (O&M) must be for the stipulated completion period plus the O&M period plus three months.
Performance Security of 5% of the gross amount will be deducted from each running bill.
Additional Performance Security (APS) will be calculated based on the percentage by which the accepted Bid Price is lower than the Cost Put to Tender, with specific incremental rates for ROPL below -10%, -20%, and -30%.
The APS amount must be submitted within seven days of the Letter of Acceptance (LoA).
If the bidder fails to submit ISD & Additional Performance Security or fails to sign the Contract, the EMD will be forfeited, and the bidder will be debarred from participation for 3 years and blacklisted.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

14 items

Must provide documentary evidence for the availability of key plant and machinery in working condition (owned, hire purchase, or leased), supported by an affidavit.
The work includes providing, supplying, laying, jointing etc. for UGPL distributaries, Minors, Sub-minors & CAD works, including off-take structures, control structures, air valves, blow off assemblies, flush valves, turnout structures.
Bidder is responsible for survey, investigation, planning, designs, estimation, getting approval of design & drawings, preparation of technical datasheet, Quality Assurance Programme, and construction programme.

Show 11 more

Bidder must prepare a detailed construction program for 12 months, including technology and construction methodology, supplemented with a Master Control Network.
Bidder must furnish a methodology for the proposed Operation & Maintenance for five years, with reference to minimum Life Cycle Cost and other O&M expenses.
Survey & Investigation includes detailed investigation, subsoil exploration, planning, fixing alignment, designing components, preparing technical specifications and detailed estimates, fixing benchmarks, collecting revenue village maps, contour surveys, assessing CCA, preparing beneficiary lists, and preparing site survey plans for crossings.
Design includes preparation of separate plans for Rising main/Pressure main, distribution chambers and networks, and processing for approval of all designs & drawings.
Procurement & Installation includes preparation of procurement schedule, arrangement for pre-procurement quality verification by third party, and procurement/installation of machinery and equipment.
Works include preparation of CPM/PERT chart, intake structures, rising main/pressure mains, distribution tank/chamber, and pipe distribution systems.
Operation & Maintenance includes maintaining the system for 5 years/5 Khariff/Rabi seasons, capacity building of O&M staff, preparing an O&M manual, and continued capacity building/training of WUAs.
Bidder is responsible for processing permissions for right of way/right of use and land acquisition, and for compensation for standing crops, trees.
Planning and design must avoid forest land; if unavoidable, the contractor processes forest clearance paperwork.
All valves and fittings used must conform to the latest production technology as per IS Code.
Technical Specifications and Technical Parameters shall conform to Bureau of Indian Standard Codes and/or International Standards & practices/C.W.C. Manuals/IRC Codes/Odisha Govt. Department specifications/Circulars.

Source: Original DTCNView source document

Contract conditions

12 items

The period of completion is 12 (Twelve) Calendar Months Including Rainy Season.
Bid Validity is 180 days from the last date of receipt of Bid.
The bid amount quoted must be exclusive of GST but inclusive of all statutory taxes, duties & other ancillary works.

Show 9 more

No foreign exchange sanctions will be made available for equipment, plants, machineries, or materials.
The Defects Liability Period is 05 (Five) years from the date of commissioning or 05 (five) Khariff/Rabi water supply seasons, whichever is later.
The Operation & Maintenance period is 05 (Five) years from the date of commissioning or 05 (Five) khariff / Rabi water supply seasons, whichever is later, and includes the defect liability period.
The amount quoted by the bidder for O&M shall not be less than 5% of the quoted execution cost; bids with less than 5% O&M cost will be rejected.
The successful bidder has to sign the contracts within 15 days of issue of the letter of acceptance.
Subletting of contract is allowed up to 50% of the contract value with prior written permission and verification of sub-contractor's experience.
Conditional tenders will not be accepted and will be rejected outright.
Bids shall be submitted online only; no paper form submissions will be accepted.
The Department reserves the right to accept or reject any or all tenders without assigning any reason.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Bill of quantities

3 priced items · ₹0 (₹0)

Download BOQ file

Tender details

Tender reference: CCE, KIP (KCD-I)-15/2026-27
Tender ID: 2026_KPRIP_144577_1
District: Keonjhar
Location: Basudevpur
Tender type: National Competitive Bid
Tender category: Works

Show all 8 fields

Product category: Civil Works - Canal
Pincode: 758047

Authority

State
Government of Odisha
Department
Kanupur Irrigation Project
Organisation
CCE-Kanupur
Inviting authority
Chief Construction Engineer, KIP, Basudevpur

All Kanupur Irrigation Project tenders in Keonjhar →

Costs

Estimated value: ₹57,20,84,000; ₹57.21 crore
EMD / bid security: ₹57,20,900; Exemption available for eligible bidders
Tender fee: ₹10,000; Cost of bid document

Bid validity: 180 days

Security & deductions from the DTCN (8)

The EMD/Bid Security amount is Rs. 57,20,900.00, to be submitted online or via unconditional and irrevocable Bank Guarantee.
Initial Security Deposit (ISD) of 2% of the accepted amount for each part of the agreement (Work and O&M) must be deposited in NSC/Post office Saving Account/Post office Time Deposit Account/Kishan Vikas Patra/Bank Guarantee/Insurance Surety Bond.
The validity of ISD for Part-I (Work) must be for the stipulated completion period plus the defect liability period plus three months.
The validity of ISD for Part-II (O&M) must be for the stipulated completion period plus the O&M period plus three months.
Performance Security of 5% of the gross amount will be deducted from each running bill.
Additional Performance Security (APS) will be calculated based on the percentage by which the accepted Bid Price is lower than the Cost Put to Tender, with specific incremental rates for ROPL below -10%, -20%, and -30%.
The APS amount must be submitted within seven days of the Letter of Acceptance (LoA).
If the bidder fails to submit ISD & Additional Performance Security or fails to sign the Contract, the EMD will be forfeited, and the bidder will be debarred from participation for 3 years and blacklisted.

Source: Original DTCN

Frequently asked questions

About this tender

Eligibility & bid requirements

DTCN analysed47 requirements extracted27 documents identifiedExtracted from the official tender document

Eligibility

6 items

Contractor must be "Super" Class, registered with the Government of Odisha; if registered outside Odisha, must register in Odisha before agreement signing.
Bidder/firm/company must not have been blacklisted in the last 5 financial years by any department in Govt. of Odisha or any other state/union Govt.
Must possess credit facilities of not less than Rs. 1144.17 Lakhs from any Nationalized/Scheduled Commercial Bank, with the bank certificate in the prescribed format.

Show 3 more

Financial Capacity must be submitted as per Annexure VIII and IX, certified by a practicing Chartered Accountant.
Joint Ventures are acceptable with a maximum of two firms as partners, with specific rules for lead partner, liability, and collective/individual satisfaction of technical and financial capacity.
Pipe and equipment manufacturers must not have been blacklisted/debarred/disqualified/disallowed for quality issues in the last 3 years; an affidavit from the manufacturer is required.

Source: Original DTCNView source document

Experience

4 items

As a prime contractor, must have satisfactorily completed (not less than 80% of original contract value) at least one similar work of Survey, Design, Supply, Execution, Installation, testing and commissioning of UGPL (Pressurised/Gravity) network in Irrigation Projects/Water Supply Project of value not less than Rs. 2288.34 Lakhs (40% of proposed Contract Value) at FY 2026-27 price level, with a 10% per year weightage for previous years.
Must have completed supply, laying, jointing, testing & commissioning of MS/DI/GRP/PSC Pipes of minimum 600 mm & above diameter for a minimum length of 12.5 Km in any one year during the last five financial years including current FY.
Must have completed supply, laying, jointing, Testing & commissioning of HDPE/PVC minimum 110 mm & above diameter for a minimum length of 50 Km in any one year during the last five financial years including current FY.

Show 1 more

Experience certificates must be self-attested client certificates from an officer not below the rank of Divisional Engineer or equivalent authority from State Government/Central Government/UTs/State PSUs/Central PSUs projects.

Source: Original DTCNView source document

Financial

11 items

Must have achieved a minimum annual turnover of Rs. 8581.26 Lakhs (1.5 times the estimated annualized cost) in Civil Engineering Construction works only in any one financial year from FY 2021-22 to FY 2025-26, with a 10% per year weightage for previous years.
Audited Balance Sheets and Profit and Loss accounts for FY 2021-22 to FY 2025-26 must be furnished.
Available Bid Capacity must be more than Rs. 5720.84 Lakhs, calculated as (A*N*2 - B), where A is maximum turnover, N is completion years, and B is existing commitments.

Show 8 more

The EMD/Bid Security amount is Rs. 57,20,900.00, to be submitted online or via unconditional and irrevocable Bank Guarantee.
Initial Security Deposit (ISD) of 2% of the accepted amount for each part of the agreement (Work and O&M) must be deposited in NSC/Post office Saving Account/Post office Time Deposit Account/Kishan Vikas Patra/Bank Guarantee/Insurance Surety Bond.
The validity of ISD for Part-I (Work) must be for the stipulated completion period plus the defect liability period plus three months.
The validity of ISD for Part-II (O&M) must be for the stipulated completion period plus the O&M period plus three months.
Performance Security of 5% of the gross amount will be deducted from each running bill.
Additional Performance Security (APS) will be calculated based on the percentage by which the accepted Bid Price is lower than the Cost Put to Tender, with specific incremental rates for ROPL below -10%, -20%, and -30%.
The APS amount must be submitted within seven days of the Letter of Acceptance (LoA).
If the bidder fails to submit ISD & Additional Performance Security or fails to sign the Contract, the EMD will be forfeited, and the bidder will be debarred from participation for 3 years and blacklisted.

The portal lists EMD exemption as available — bidders claiming it must meet the DTCN conditions and usually submit an affidavit.

Source: Original DTCNView source document

Technical

14 items

Must provide documentary evidence for the availability of key plant and machinery in working condition (owned, hire purchase, or leased), supported by an affidavit.
The work includes providing, supplying, laying, jointing etc. for UGPL distributaries, Minors, Sub-minors & CAD works, including off-take structures, control structures, air valves, blow off assemblies, flush valves, turnout structures.
Bidder is responsible for survey, investigation, planning, designs, estimation, getting approval of design & drawings, preparation of technical datasheet, Quality Assurance Programme, and construction programme.

Show 11 more

Bidder must prepare a detailed construction program for 12 months, including technology and construction methodology, supplemented with a Master Control Network.
Bidder must furnish a methodology for the proposed Operation & Maintenance for five years, with reference to minimum Life Cycle Cost and other O&M expenses.
Survey & Investigation includes detailed investigation, subsoil exploration, planning, fixing alignment, designing components, preparing technical specifications and detailed estimates, fixing benchmarks, collecting revenue village maps, contour surveys, assessing CCA, preparing beneficiary lists, and preparing site survey plans for crossings.
Design includes preparation of separate plans for Rising main/Pressure main, distribution chambers and networks, and processing for approval of all designs & drawings.
Procurement & Installation includes preparation of procurement schedule, arrangement for pre-procurement quality verification by third party, and procurement/installation of machinery and equipment.
Works include preparation of CPM/PERT chart, intake structures, rising main/pressure mains, distribution tank/chamber, and pipe distribution systems.
Operation & Maintenance includes maintaining the system for 5 years/5 Khariff/Rabi seasons, capacity building of O&M staff, preparing an O&M manual, and continued capacity building/training of WUAs.
Bidder is responsible for processing permissions for right of way/right of use and land acquisition, and for compensation for standing crops, trees.
Planning and design must avoid forest land; if unavoidable, the contractor processes forest clearance paperwork.
All valves and fittings used must conform to the latest production technology as per IS Code.
Technical Specifications and Technical Parameters shall conform to Bureau of Indian Standard Codes and/or International Standards & practices/C.W.C. Manuals/IRC Codes/Odisha Govt. Department specifications/Circulars.

Source: Original DTCNView source document

Contract conditions

12 items

The period of completion is 12 (Twelve) Calendar Months Including Rainy Season.
Bid Validity is 180 days from the last date of receipt of Bid.
The bid amount quoted must be exclusive of GST but inclusive of all statutory taxes, duties & other ancillary works.

Show 9 more

No foreign exchange sanctions will be made available for equipment, plants, machineries, or materials.
The Defects Liability Period is 05 (Five) years from the date of commissioning or 05 (five) Khariff/Rabi water supply seasons, whichever is later.
The Operation & Maintenance period is 05 (Five) years from the date of commissioning or 05 (Five) khariff / Rabi water supply seasons, whichever is later, and includes the defect liability period.
The amount quoted by the bidder for O&M shall not be less than 5% of the quoted execution cost; bids with less than 5% O&M cost will be rejected.
The successful bidder has to sign the contracts within 15 days of issue of the letter of acceptance.
Subletting of contract is allowed up to 50% of the contract value with prior written permission and verification of sub-contractor's experience.
Conditional tenders will not be accepted and will be rejected outright.
Bids shall be submitted online only; no paper form submissions will be accepted.
The Department reserves the right to accept or reject any or all tenders without assigning any reason.

Source: Original DTCNView source document

Requirements are extracted automatically and grouped for reading. Always verify final requirements in the original tender document before submitting a bid.

Costs

Estimated value

₹57,20,84,000

₹57.21 crore

EMD / bid security

₹57,20,900

Exemption available for eligible bidders

Tender fee

₹10,000

Cost of bid document

Bid validity: 180 days

Security & deductions from the DTCN (8)

The EMD/Bid Security amount is Rs. 57,20,900.00, to be submitted online or via unconditional and irrevocable Bank Guarantee.
Initial Security Deposit (ISD) of 2% of the accepted amount for each part of the agreement (Work and O&M) must be deposited in NSC/Post office Saving Account/Post office Time Deposit Account/Kishan Vikas Patra/Bank Guarantee/Insurance Surety Bond.
The validity of ISD for Part-I (Work) must be for the stipulated completion period plus the defect liability period plus three months.
The validity of ISD for Part-II (O&M) must be for the stipulated completion period plus the O&M period plus three months.
Performance Security of 5% of the gross amount will be deducted from each running bill.
Additional Performance Security (APS) will be calculated based on the percentage by which the accepted Bid Price is lower than the Cost Put to Tender, with specific incremental rates for ROPL below -10%, -20%, and -30%.
The APS amount must be submitted within seven days of the Letter of Acceptance (LoA).
If the bidder fails to submit ISD & Additional Performance Security or fails to sign the Contract, the EMD will be forfeited, and the bidder will be debarred from participation for 3 years and blacklisted.

Source: Original DTCN

Frequently asked questions

Construction of Distribution System for 2482.16 ha. of CCA including CAD of KIP through UGPL including survey, investigation, planning, Design and Estimate O and M on complete Commissioned Project on EPC mode basis for five years in Kendujhar...

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

Construction of Distribution System for 2482.16 ha. of CCA including CAD of KIP through UGPL including survey, investigation, planning, Design and Estimate O and M on complete Commissioned Project on EPC mode basis for five years in Kendujhar...

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Eligibility

Experience

Financial

Technical

Contract conditions

Bill of quantities

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more

About this tender

Bid readiness

Important dates

Eligibility & bid requirements

Bill of quantities

Tender documents

Documents required for submission

Tender details

Authority

Costs

Frequently asked questions

What is the last date to bid for this tender?

What is the estimated value of this tender?

How much EMD is required?

Who can bid for this tender?

What work experience is required?

Which department issued this tender?

What documents are required to submit a bid?

Similar tenders

Helpful guides

Explore more